Open Tender for Arch wire preformed NiTi 0.012 upper pkt of 10,Arch wire preformed NiTi 0.012 lower pkt of 10,Arch in JODHPUR, RAJASTHAN
Progress
RAIndian Army has released a public tender for Arch wire preformed NiTi 0. 012 upper pkt of 10, Arch wire preformed NiTi 0. 012 lower pkt of 10, Arch wire preformed NiTi 0. 014 Upper Pkt of 10, Arch wire preformed NiTi 0. 014 Lower Pkt of 10, Arch wire preformed NiTi. 016 wire upper pkt of 10, Arch wire preformed NiTi. 016 wire lower pkt of 10, Arch wire preformed NiTi 0. 016 x 0. 022 upper pkt of 10, Arch wire preformed NiTi 0. 016 x 0. 022 lower pkt of 10, Arch wire preformed NiTi 0. 017x0. 025 Upper Pkt of 10, Arch wire preformed NiTi 0. 017x0. 025 Lower Pkt of 10, Arch wire preformed NiTi 0. 019x0. 025 Upper Pkt of 10, Arch wire preformed NiTi 0. 019x0. 025 Lower Pkt of 10, Arch wire preformed Martensitic NiTi 0. 017x0. 025 Upper Pkt of 10, Arch wire preformed Martensitic NiTi 0. 017x0. 025 Lower Pkt of 10, Arch wire preformed SS 016 wire upper pkt of 10, Arch wire preformed SS. 016 wire lower pkt of 10, Arch wire preformed SS 0. 016. x 0. 022 Upper pkt of 10, Arch wire preformed SS 0. 016. x0. 022 Lower pkt of 10, Arch wire preformed SS 0. 017. x0. 025 Upper pkt of 10, Arch wire preformed SS 0. 017. x0. 025 Lower pkt of 10, Arch wire straight length 14 inch 0. 016 x. 022 SS pkt of 10, Arch wire preformed SS 0. 019. x0. 025 Upper pkt of 10, Arch wire preformed SS 0. 019. x0. 025 Lower pkt of 10, 0. 017x0. 025 TMA straight length pkt of 10, Short Ligature Ties Pack of 100, Long Ligature Ties Pack of 100, Niti closed coil spring 06 mm pack of 10, Niti compression open coil spring spool of 2 meter, Niti tension spring length 3mm pkt of 10, Crimpable hooks 019x025 pkt of 10, Lingual button bondable pkt of 10, Lingual sheath pkt of 50, Orthodontic sleeve 0. 019X 0. 025, 0. 010 SS Ligature Wire spool of 500gm, Separators pkt of 100, Silver Solder spool, Flux for silver solder, Bondable buccal tubes 0. 022 MBT SWA for 1st molar set of 4, OrthoKal dental plaster pkt of 03 kg, Ortho relief wax transparent, Ortho vita Blue bond cement, IPR safe sided diamond bur set of 3, IPR safe sided diamond disc, Latex elastic blue, pkt of 1000, Latex elastic yellow 5 16 light, pkt of 1000, Latex elastic red 5 16 heavy, pkt of 1000, Advansync 2 Orthodontic Fixed Functional Appliance Size No. 5, Extra oral Elastic Packet Of 1000, Forsus FRD L Pin 32 mm, Torch for Butane Gas, Disposable cheek retractor, Orthodontic tooth brush, Preventive anticaries toothpaste for orthodontic patients, Bondable stainless steel orthodontic brackets set of 4, Ceramic Orthodontic brackets 0. 022 MBT, Protective eye wear for composite light cure, Toffelmiere matrix retainer, Bands for toffelmiere retainers, Spandex transparent with wings for orthodontic use, Orthodontic adhesive Transbond plus in JODHPUR, RAJASTHAN. Quantity: 913. Submission Deadline: 15-10-2026 10: 00: 00. Download documents and apply online.
Reverse Auction Schedule
Start
30-Oct-2026, 11:00 am
End
31-Oct-2026, 11:00 am
Duration: 24 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
Tender Data
Bid Details
Quantity
913
Category
Ceramic Orthodontic brackets 0.022 MBT
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
Bid Splitting Applied
No
Requirements
Past Performance
40 %
Warranty Period
10 days
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Arch wire preformed NiTi 0.012 upper pkt of 10 , Arch wire preformed NiTi 0.012 lower pkt of 10 , Arch wire preformed NiTi 0.014 Upper Pkt of 10 , Arch wire preformed NiTi 0.014 Lower Pkt of 10 , Arch wire preformed NiTi .016 wire upper pkt of 10 , Arch wire preformed NiTi .016 wire lower pkt of 10 , Arch wire preformed NiTi 0.016 x 0.022 upper pkt of 10 , Arch wire preformed NiTi 0.016 x 0.022 lower pkt of 10 , Arch wire preformed NiTi 0.017x0.025 Upper Pkt of 10 , Arch wire preformed NiTi 0.017x0.025 Lower Pkt of 10 , Arch wire preformed NiTi 0.019x0.025 Upper Pkt of 10 , Arch wire preformed NiTi 0.019x0.025 Lower Pkt of 10 , Arch wire preformed Martensitic NiTi 0.017x0.025 Upper Pkt of 10 , Arch wire preformed Martensitic NiTi 0.017x0.025 Lower Pkt of 10 , Arch wire preformed SS 016 wire upper pkt of 10 , Arch wire preformed SS .016 wire lower pkt of 10 , Arch wire preformed SS 0.016.x 0.022 Upper pkt of 10 , Arch wire preformed SS 0.016.x0.022 Lower pkt of 10 , Arch wire preformed SS 0.017.x0.025 Upper pkt of 10 , Arch wire preformed SS 0.017.x0.025 Lower pkt of 10 , Arch wire straight length 14 inch 0 .016 x .022 SS pkt of 10 , Arch wire preformed SS 0.019.x0.025 Upper pkt of 10 , Arch wire preformed SS 0.019.x0.025 Lower pkt of 10 , 0.017x0.025 TMA straight length pkt of 10 , Short Ligature Ties Pack of 100 , Long Ligature Ties Pack of 100 , Niti closed coil spring 06 mm pack of 10 , Niti compression open coil spring spool of 2 meter , Niti tension spring length 3mm pkt of 10 , Crimpable hooks 019x025 pkt of 10 , Lingual button bondable pkt of 10 , Lingual sheath pkt of 50 , Orthodontic sleeve 0.019X 0.025 , 0.010 SS Ligature Wire spool of 500gm , Separators pkt of 100 , Silver Solder spool , Flux for silver solder , Bondable buccal tubes 0.022 MBT SWA for 1st molar set of 4 , OrthoKal dental plaster pkt of 03 kg , Ortho relief wax transparent , Ortho vita Blue bond cement , IPR safe sided diamond bur set of 3 , IPR safe sided diamond disc , Latex elastic blue , pkt of 1000 , Latex elastic yellow 5 16 light, pkt of 1000 , Latex elastic red 5 16 heavy, pkt of 1000 , Advansync 2 Orthodontic Fixed Functional Appliance Size No. 5 , Extra oral Elastic Packet Of 1000 , Forsus FRD L Pin 32 mm , Torch for Butane Gas , Disposable cheek retractor , Orthodontic tooth brush , Preventive anticaries toothpaste for orthodontic patients , Bondable stainless steel orthodontic brackets set of 4 , Ceramic Orthodontic brackets 0.022 MBT , Protective eye wear for composite light cure , Toffelmiere matrix retainer , Bands for toffelmiere retainers , Spandex transparent with wings for orthodontic use , Orthodontic adhesive Transbond plus
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
3
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Jodhpur
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Jodhpur | Jodhpur | - | - | 15 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9887007.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
60 Items Sign in to view GEM price trends Sign in for GEM prices
Arch wire preformed NiTi 0.012 upper pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 012 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.012 lower pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 012 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.014 Upper Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 014 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.014 Lower Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 014 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi .016 wire upper pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 016 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi .016 wire lower pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 016 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.016 x 0.022 upper pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 016 X 0 point 022 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.016 x 0.022 lower pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 016 X 0 point 022 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.017x0.025 Upper Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.017x0.025 Lower Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.019x0.025 Upper Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 019 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed NiTi 0.019x0.025 Lower Pkt of 10
Preformed NiTi orthodontic upper arch wires 0 point 019 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed Martensitic NiTi 0.017x0.025 Upper Pkt of 10
Preformed Martensitic NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed Martensitic NiTi 0.017x0.025 Lower Pkt of 10
Preformed Martensitic NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10. The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years
Arch wire preformed SS 016 wire upper pkt of 10
Preformed Stainless steel orthodontic upper arch wires 0 point 016 Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 percent Chromium for corrosion resistance and 8 12 percent Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean Ra value 0 25 sum resulting in lower friction.
Arch wire preformed SS .016 wire lower pkt of 10
Preformed Stainless steel orthodontic lower arch wires 0 point 016 Material Composition Primarily AISI 304 austenitic stainless steel containing 1720 Chromium for corrosion resistance and 8 12 Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength appro 780t ext N Surface Roughness Low mean R a value 0 25 summ, resulting in lower friction.
Arch wire preformed SS 0.016.x 0.022 Upper pkt of 10
Preformed Stainless steel orthodontic upper arch wires 0 point 016 X 0 point 022 size Material Composition Primarily A ISI 304 austenitic stainless steel, containing 17 20 Chromium for corrosion resistance and 8 12 Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean R a value 0 25 sum, resulting in lower friction.
Arch wire preformed SS 0.016.x0.022 Lower pkt of 10
Preformed Stainless steel orthodontic lower arch wires 0 point 016 X 0 point 022 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17-20 percent Chromium for corrosion resistance) and 8-12 percent Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low (mean R a value 0.25 sum, resulting in lower friction.
Arch wire preformed SS 0.017.x0.025 Upper pkt of 10
Preformed Stainless steel orthodontic upper arch wires 0 point 017 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17-20% Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low (mean R a value 0.25 sum), resulting in lower friction.
Arch wire preformed SS 0.017.x0.025 Lower pkt of 10
Preformed Stainless steel orthodontic lower arch wires 0 point 017 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 812 Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean R a value 0.25 sum, resulting in lower friction.
Arch wire straight length 14 inch 0 .016 x .022 SS pkt of 10
Straight length Stainless steel orthodontic arch wires 0 point 016 X 0 point 022 size and 14 inches in length Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780text N Surface Roughness Low (mean Ravalue 0.25 sum), resulting in lower friction.
Arch wire preformed SS 0.019.x0.025 Upper pkt of 10
Preformed Stainless steel orthodontic upper arch wires 0 point 019 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780ext Surface Roughness Low (mean R a value 0.25 sum), resulting in lower friction.
Arch wire preformed SS 0.019.x0.025 Lower pkt of 10
Preformed Stainless steel orthodontic lower arch wires 0 point 019 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium for corrosion resistance and 8-12 Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength appro 780 text N Surface Roughness Low (mean R value 0 25 sum, resulting in lower friction.
0.017x0.025 TMA straight length pkt of 10
Preformed TMA orthodontic lower arch wires 0 point 017 X 0 point 025 size Composition Titanium Molybdenum Alloy approx. 79 Titanium, 11 Molybdenum, 6 Zirconium, 4 Tin. Force Level Delivers roughly half the force of stainless steel, offering gentle and consistent, predictable tooth movement. Flexibility High springback, providing a large range of action with lower stiffness. Formability Highly malleable, allowing for chairside fabrication of loops and bends. Biocompatibility Nickel free, making them an excellent choice for patients with nickel allergies.
Short Ligature Ties Pack of 100
Material Medical-grade, corrosion-resistant stainless steel. Diameter Typically .010 Form Pre formed (shortened) with pre twisted, pigtail ends for easy handling and quick placement. Length Short (often designed for single bracket engagement). Packaging Commonly available in tubes or packs of 100
Long Ligature Ties Pack of 100
Material Medical-grade, corrosion resistant stainless steel. Diameter Typically .010 Form straight (long) with pre-twisted, Length Long (often designed for single bracket engagement). Packaging Commonly available in tubes or packs of 100
Niti closed coil spring 06 mm pack of 10
Material Superelastic Nickel Titanium NiTi alloy. Length 6mm pre-packaged with eyelets Inner Diameter Arbor 0.030 prime prime 0.76 text mm. Force Levels Generally classified as Light 100g, Medium 150g, or Heavy 200g. Design Closed coil with eyelets for attaching directly to orthodontic brackets or hooks
Niti compression open coil spring spool of 2 meter
Material Superelastic Nickel Titanium NiTi alloy. Lengths 2 metre spool Inner Diameter Arbor 0.030 primeprim 0.76 text
Niti tension spring length 3mm pkt of 10
Material Superelastic Nickel Titanium NiTi alloy. Lengths 3mm pre packaged with eyelets Inner Diameter (Arbor) 0.030 primeprime 0.76 text . Force Levels Generally classified as Light 100g, Medium 150, or Heavy 200 Design Closed coil with eyelets for attaching directly to orthodontic brackets or hook
Crimpable hooks 019x025 pkt of 10
Material Medical grade Stainless Steel. Archwire Compatibility Suitable for various, including rectangular e.g 0.019 times 0.025 , 0.018 times 0.025 and round wires Size Approx. 4.7mm - 5.5mm Surface Highly polished to reduce patient discomfort
Lingual button bondable pkt of 10
Material High grade Stainless Steel hardened, corrosion-resistant or Aesthetic Ceramic Composite tooth-colored. Design Head Mushroom shape, polished to prevent patient irritation. Bondable Curved or flat with mesh structure for maximum bonding retention direct enamel adhesion. Medium Standard 3.5 4 mm Used for most general applications
Lingual sheath pkt of 50
Material High quality, medical grade stainless steel, offering corrosion resistance and biocompatibility. Dimensions Slot Sizes Commonly available in 036 inch internal diameters. Attachment Method Weldable Designed for welding onto Stainless Steel molar bands Length Commonly around 3.5mm for standard size
Orthodontic sleeve 0.019X 0.025
Material Primarily soft medical grade silicone polyurethane or PVC. Biocompatibility Non toxic, latexfree, and resistant to degradation from saliva, temperature fluctuations, and plaque accumulation. Packaging Length Available in spoolsrolls ranging from 2 meters, 5 meters, to 10 12 feet approx. 3 4 meters. Color Option Transparent Clear for aesthetics
0.010 SS Ligature Wire spool of 500gm
Material Medical grade, corrosion resistant stainless steel. Diameter Typically 010 Spool of wire Total weight 500gm
Separators pkt of 100
Material Most common separators are made from high quality, latex free polyurethane elastomeric material. Types Elastomeric Rings O-rings Small, donut shaped rings that are stretched and inserted interproximally. Dimensions & Size Small Standard Generally sim 3mm diameter and 0 75mm thickness Pack Size Commonly sold in packs of 700 to 1000 often arranged on star-shaped sticks for easy handling
Silver Solder spool
Composition Primarily Silver Ag, Copper Cu, and Zinc Zn Silver Content Commonly ranges between 4560. Cadmium Conten 0 Cadmium-free Lead Content 0 Lead free. MeltingFlow Point Typically ranges from 650 C to 700 C 1200F 1292 Wire Diameter Size Common Diameter 0.7mm to 0.8mm. Gauge Typically .025 in or 22 gauge. Form wire spool
Flux for silver solder
Composition Typically contains fluorides, potassium salts, and borates in a water base, ensuring it is generally CADMIUM FREE. Type Fluoride-based, paste consistency. Appearance White cream/paste. Melting Range Optimized for low-fusing silver solder, typically effective at temperatures around 650circtextC to 800 circ ex. Solubility Water-soluble can be reconstituted with distilled water
Bondable buccal tubes 0.022 MBT SWA for 1st molar set of 4
Orthodontic weldable buccal tubes nonconvertible 1 Molar 0 point 022 MBT with hooks Compound contoured One piece metal injection method Lead in arch wire slot for easy insertion Bio compactible to bonding material 1 x pack of 04 buccal tubes two upper and two lower Material should supplied with mfg lot no expiry and of self life of 02 years
OrthoKal dental plaster pkt of 03 kg
TypeClass Type III Class III High Strength Dental Stone. Color white Water Powder Ratio 28 ml 100 g. Mixing Time 15 seconds manual Working Time 5 to 6 minutes. Setting Time 8 minutes. Setting Expansion 0.10 to 0.20. Compressive Strength 1 hr 340 350 tex kg cm Compressive Strength 24 hr 700 text kgcm.
Ortho relief wax transparent
Composition High quality medical grade paraffin wax, sometimes blended with beeswax or carnauba wax. Physical State Solid at room temperature becomes pliable and malleable when warmed by fingers. Appearance Typically clear, transparent, or white, designed to be discreet and invisible, though colored varieties e.g. pink exist. Dimensions Strip Approximately 4.7mm x 5.2mm x 300mm. Dimensions Case Commonly sold in small, portable plastic boxes, roughly 35mm x 20mm x 5mm, containing 5 6 strips. Flavors Available in unscented non-flavored, mint, strawberry, lemon, rose, and assorted options. Safety Profile Non toxic, food grade ingredients when FDA approved, safe for accidental ingestion, and suitable for all ages. Adhesion Formulated to stick to metal or ceramic brackets and wires even in a moist environment, though it is recommended to dry the appliance first. Melting Flammability Non flammable solid specifically designed for stability at oral temperatures
Ortho vita Blue bond cement
Type Light cure compomer band cement. Colo Blue for visibility and easy removal Delivery Preloaded syringe 5g Consistency Tacky, low viscosity paste. Cure Time 30 seconds. Fluoride Release Yes, provides fluoride release to help prevent decalcification. Shelf Life 2 years (when properly stored Storage Room temperature or refrigeration
IPR safe sided diamond bur set of 3
Thickness Head Diameter Commonly available in increments of 0.1 tex mm 0.2 tex mm, 0.25tex mm, 0.3 textmm 0.4 textmm and 0.5 text mm to allow for progressive, controlled reduction Grit Usually Fine red band or Extra Fine yellow band for smooth, precise cutting and minimal polishing requirements. Shap Tapered pointed, Tapered round, or Flame-shaped to allow for precise interproximal insertion, often with a long neck to improve visibility. Shank Friction Grip FG standard, designed for high speed handpieces, or sometimes Handpiece HP for specialized hand held systems. Material Medical grade stainless steel with robust natural diamond coating
IPR safe sided diamond disc
Disc Thickness Common, precise thicknesses include 0.15 mm, 0.20 mm, and 0.30 mm. Coating Safe Sided These discs have diamond grit on only one side top or bottom, with the reverse side being smooth non abrasive to prevent damage to the adjacent tooth. Diameter Generally available in 18.0 mm to 22.0 mm, with popular smaller sizes like 19.0 mm for better control. Grit Sizes Fine Red Yellow Usually recommended for finishing and polishing. Medium Blue Typically used for primary enamel removal. Handpiece Compatibility Designed for use with low speed or contra-angle handpieces, generally operated at speeds around 5,000 to 10,000 RPM. Sterilization Must be autoclavable up to 250 F121 C or dry heat sterilizable up to 340 F 170 C. Mandrel Type Often used with a standard latch type RA mandrel.
Latex elastic blue , pkt of 1000
Material High-quality medical-grade, biocompatible natural latex. Color Bright Blue. Sizes Diameter Commonly 1 4 inch 6.35mm, Force Levels Measured at 3 times diameter Medium 3.5 oz. 99 grams or 4.5 oz. 127.6 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer.
Latex elastic yellow 5 16 light, pkt of 1000
Material High-quality medical-grade, biocompatible natural latex. Color Bright Yellow. Sizes Diameter Commonly 3 8 inch 9.5mm Force Levels Measured at 3 times diameter Light 2 oz. 56.6 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer.
Latex elastic red 5 16 heavy, pkt of 1000
Material High quality medical grade, biocompatible natural latex. Color Red. Sizes Diameter 38 inch 9.5mm Force Levels Measured at 3 times diameter Heavy 6 oz. 170 grams or 6.5 oz. 184 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer.
Advansync 2 Orthodontic Fixed Functional Appliance Size No. 5
Design to allow simultaneous fixed orthodontic appliance treatment and reduce the two phase treatment and provide constant activation and minimize the need for patient compliance Allow freedom of mechanics mesial to the molar crown Provides a range of motion to support patient comfort Material should supplied with mfg lot no expiry and of self life of 02 years
Extra oral Elastic Packet Of 1000
Material Most are made from medical or surgical grade natural latex to ensure high elasticity and rapid recovery. Heavy Extra Strong 14 oz 392g 400g). Lumen Diameter 516 inch (7.94 mm) Durability Latex versions offer superior force delivery consistency but are susceptible to degradation from intraoral temperature and saliva over time
Forsus FRD L Pin 32 mm
The 3M Unitek Forsus Fatigue Resistant Device FRD LPin Module is a fixed, hybrid-functional appliance designed for Class II correction. The L Pin version uses a specialized locking pin for attachment, offering greater versatility in mounting options (including directly to the archwire via a mount Force Delivery Delivers a consistent, continuous force of approximately 200 grams approx. 2 Newtons) when fully activated Material Fatigue-resistant stainless steel Module Orientation Universal the Spring Module itself can be used on either the Left or Right side)
Torch for Butane Gas
Butane gas torches portable, high-temperature tools commonly used for soldering Typical Technical Specifications Fuel Type Standard butane canisters (often with a nozzle latch connection) Flame Temperature Up to 1300 degree centigrade Gas Consumption Approximately 50g to 140g per hour Material Usually copper, brass, or aluminum alloy with ABS plastic components Dimensions & Weight Length typically ranges between 15cm - 20cm, with a weight around 80g to 150g Features Adjustable flame, anti-flare technology, and safety lock for continuous use Safety 360 degree rotation allowed for use in tight, hard to reach areas
Disposable cheek retractor
Latex free flexible and comfortable Cheek Retractor provides retraction of lips and cheeks during dental treatments. Cheek Retractors with durable and long handle makes it easy to apply on the patients. The smooth surface makes it very comfortable for the patient. Autoclavable up to 134 degree celsius and is of following types Made of durable clear plastic for increased visibility Double span cheek retractor is designed for hands free use Opens the oral cavity widely without any pain Protects the sensitive gums during teeth whitening treatment Adult size
Orthodontic tooth brush
Bristle Design V shaped or bracket groove cut, where center bristles are shorter to sit on brackets, while outer bristles clean the gum line. Bristle Type Ultra-soft or soft, with rounded tips to prevent enamel damage and gum recession. Filament Material Often made of Curen polyester or PBT polybutylene terephthalate which are more stable and stiff when wet compared to traditional nylon. Filament Diameter Very fine, typically 0 point 10 for improved penetration between wires and teeth. Filament Count Extremely high density, commonly 5,460 filaments per head, providing a wide cleaning surface. Brush Head Compact and slightly angled, allowing access to posterior teeth. Handle Often octagonal or ergonomic, assisting with proper 45 degree angle brushing
Preventive anticaries toothpaste for orthodontic patients
Active Ingredient Amine Fluoride thousand ppm Form Past Indications Orthodontic treatment, enamel remineralization, anti cavity, and sensitivity protection Key Ingredients Sorbitol, Purified Water, Propylene Glycol, Silica mild abrasive, Cocamidopropyl Betaine foaming agent, Titanium Dioxide, Hydroxyethyl Cellulose Flavor Mild Mint Size 70 grams
Bondable stainless steel orthodontic brackets set of 4
Material High grade stainless steel is the standard for metal, providing corrosion resistance and strength Slot Sizes 0 point 022 Base Design 80 Gauge Mesh Standardized to provide a strong, retentive surface for adhesive. Laser Structured Retention Grooves Offer superior shear bond strength compared to standard mesh. Anatomical Contour Base is curved to match the natural contour of the tooth for better fit and reduced bond failure. Bonding Strength Clinically acceptable shear bond strength is generally considered to be 5.9 to 7.8 MPa. Profile Lowprofile designs are preferred to minimize patient discomfort and interference.
Ceramic Orthodontic brackets 0.022 MBT
Material 99.9 pure alumina Monocrystalline Bracket Types Conventional Twin Siamese Slot Size Standardized point 022 slot systems. Prescriptions Commonly available in MBT, Roth, and Edgewise systems. Base Design Compound contour bases, often with sandblasted or undercut grooves for mechanical retention 3M Unitek Clarity Advance Known for low-profile, fine-grained ceramic, and stress-concentrator technology for easy debonding.
Protective eye wear for composite light cure
composite light cure
Toffelmiere matrix retainer
Material High grade stainless steel, typically medical grade, providing durability and corrosion resistance. Types Available in Universal Design Configuration Head U shaped frame Holds the band features three guide slots straight, left, right for different positionings. Locking Vis Sliding body that secures the band ends. Sterilization Fully autoclavable and reusable. Compatibility Works with standard matrix bands of varying thicknesses e.g 0.02 gauge Contra Angle Design Many models are designed with a contra angle angled head for both buccal and lingual application
Bands for toffelmiere retainers
Material High-quality, corrosion-resistant, medical-grade stainless steel. Thickness 0 point 001 inch Dead-soft or ultra thin, offering higher flexibility. Shapes UniversalNo. 1 Flat, straight band suitable for most posterior cases. Dimensions Typically 5mm in width. Sterilization Autoclavable at standard temperatures
Spandex transparent with wings for orthodontic use
Material 100 Medical Grade Silicone. Appearance ClearTransparent Autoclavable, capable of lasting up to 1,000 sterilization cycles. Comfort Soft and flexible compared to traditional hard plastic retractors. Sizes Available in Adult
Orthodontic adhesive Transbond plus
Transbond plus Orthodontic color changing adhesives, are light-cured, resin based materials designed to transition from a colored state usually pink or blue to transparent upon curing. Color Transition Color changes from vibrant pink blue to clear tooth colored upon activation with a curing light, indicating successful bonding. Viscosity Medium to high viscosity, designed to prevent bracket drifting sliding during placement and to manage adhesive flow. Cure Time Fast, light-cure polymerization typically 6 10 seconds with high intensity LED lights). Moisture Tolerance Many e g Transbond Plus are designed to function in slightly moist conditions (hydrophilic) to improve reliability in challenging oral environments. Packaging Available in syringes
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Arch wire preformed NiTi 0.012 upper pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 012 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 2 | Arch wire preformed NiTi 0.012 lower pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 012 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 3 | Arch wire preformed NiTi 0.014 Upper Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 014 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 4 | Arch wire preformed NiTi 0.014 Lower Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 014 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 5 | Arch wire preformed NiTi .016 wire upper pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 016 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | set | gembuyercdu | 10 | |
| 6 | Arch wire preformed NiTi .016 wire lower pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 016 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | set | gembuyercdu | 10 | |
| 7 | Arch wire preformed NiTi 0.016 x 0.022 upper pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 016 X 0 point 022 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 8 | Arch wire preformed NiTi 0.016 x 0.022 lower pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 016 X 0 point 022 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 9 | Arch wire preformed NiTi 0.017x0.025 Upper Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 10 | Arch wire preformed NiTi 0.017x0.025 Lower Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 15 | pkt | gembuyercdu | 10 | |
| 11 | Arch wire preformed NiTi 0.019x0.025 Upper Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 019 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 5 | pkt | gembuyercdu | 10 | |
| 12 | Arch wire preformed NiTi 0.019x0.025 Lower Pkt of 10 | Preformed NiTi orthodontic upper arch wires 0 point 019 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 5 | pkt | gembuyercdu | 10 | |
| 13 | Arch wire preformed Martensitic NiTi 0.017x0.025 Upper Pkt of 10 | Preformed Martensitic NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10 The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 2 | pkt | gembuyercdu | 10 | |
| 14 | Arch wire preformed Martensitic NiTi 0.017x0.025 Lower Pkt of 10 | Preformed Martensitic NiTi orthodontic upper arch wires 0 point 017 X 0 point 025 known lowest force heat activated wire Once ligated its shape memory becomes active with the patients natural body temperature 90 atmospheric degree F 32 atmospheric degree Celsius Highly smooth with a bright finish for reduced friction Adequate stiffness in small dimensions to deliver optimal forces during initial phase of treatment Should be super elastic and pkt of 10. The product should have clearly mentioned lot no mfg date and exp date Shelf life minimum 02 years | 2 | pkt | gembuyercdu | 10 | |
| 15 | Arch wire preformed SS 016 wire upper pkt of 10 | Preformed Stainless steel orthodontic upper arch wires 0 point 016 Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 percent Chromium for corrosion resistance and 8 12 percent Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean Ra value 0 25 sum resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 16 | Arch wire preformed SS .016 wire lower pkt of 10 | Preformed Stainless steel orthodontic lower arch wires 0 point 016 Material Composition Primarily AISI 304 austenitic stainless steel containing 1720 Chromium for corrosion resistance and 8 12 Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength appro 780t ext N Surface Roughness Low mean R a value 0 25 summ, resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 17 | Arch wire preformed SS 0.016.x 0.022 Upper pkt of 10 | Preformed Stainless steel orthodontic upper arch wires 0 point 016 X 0 point 022 size Material Composition Primarily A ISI 304 austenitic stainless steel, containing 17 20 Chromium for corrosion resistance and 8 12 Nickel for ductility Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean R a value 0 25 sum, resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 18 | Arch wire preformed SS 0.016.x0.022 Lower pkt of 10 | Preformed Stainless steel orthodontic lower arch wires 0 point 016 X 0 point 022 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17-20 percent Chromium for corrosion resistance) and 8-12 percent Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low (mean R a value 0.25 sum, resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 19 | Arch wire preformed SS 0.017.x0.025 Upper pkt of 10 | Preformed Stainless steel orthodontic upper arch wires 0 point 017 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17-20% Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low (mean R a value 0.25 sum), resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 20 | Arch wire preformed SS 0.017.x0.025 Lower pkt of 10 | Preformed Stainless steel orthodontic lower arch wires 0 point 017 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 812 Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity200 GPa, offering high force delivery. Yield Strength approx 780 text N Surface Roughness Low mean R a value 0.25 sum, resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 21 | Arch wire straight length 14 inch 0 .016 x .022 SS pkt of 10 | Straight length Stainless steel orthodontic arch wires 0 point 016 X 0 point 022 size and 14 inches in length Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780text N Surface Roughness Low (mean Ravalue 0.25 sum), resulting in lower friction. | 4 | pkt | gembuyercdu | 10 | |
| 22 | Arch wire preformed SS 0.019.x0.025 Upper pkt of 10 | Preformed Stainless steel orthodontic upper arch wires 0 point 019 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium (for corrosion resistance) and 8-12 Nickel (for ductility). Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa, offering high force delivery. Yield Strength approx 780ext Surface Roughness Low (mean R a value 0.25 sum), resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 23 | Arch wire preformed SS 0.019.x0.025 Lower pkt of 10 | Preformed Stainless steel orthodontic lower arch wires 0 point 019 X 0 point 025 size Material Composition Primarily AISI 304 austenitic stainless steel, containing 17 20 Chromium for corrosion resistance and 8-12 Nickel for ductility. Mechanical Properties High Stiffness Modulus of Elasticity 200 GPa offering high force delivery. Yield Strength appro 780 text N Surface Roughness Low (mean R value 0 25 sum, resulting in lower friction. | 10 | pkt | gembuyercdu | 10 | |
| 24 | 0.017x0.025 TMA straight length pkt of 10 | Preformed TMA orthodontic lower arch wires 0 point 017 X 0 point 025 size Composition Titanium Molybdenum Alloy approx. 79 Titanium, 11 Molybdenum, 6 Zirconium, 4 Tin. Force Level Delivers roughly half the force of stainless steel, offering gentle and consistent, predictable tooth movement. Flexibility High springback, providing a large range of action with lower stiffness. Formability Highly malleable, allowing for chairside fabrication of loops and bends. Biocompatibility Nickel free, making them an excellent choice for patients with nickel allergies. | 3 | pkt | gembuyercdu | 10 | |
| 25 | Short Ligature Ties Pack of 100 | Material Medical-grade, corrosion-resistant stainless steel. Diameter Typically .010 Form Pre formed (shortened) with pre twisted, pigtail ends for easy handling and quick placement. Length Short (often designed for single bracket engagement). Packaging Commonly available in tubes or packs of 100 | 20 | pkt | gembuyercdu | 10 | |
| 26 | Long Ligature Ties Pack of 100 | Material Medical-grade, corrosion resistant stainless steel. Diameter Typically .010 Form straight (long) with pre-twisted, Length Long (often designed for single bracket engagement). Packaging Commonly available in tubes or packs of 100 | 20 | pkt | gembuyercdu | 10 | |
| 27 | Niti closed coil spring 06 mm pack of 10 | Material Superelastic Nickel Titanium NiTi alloy. Length 6mm pre-packaged with eyelets Inner Diameter Arbor 0.030 prime prime 0.76 text mm. Force Levels Generally classified as Light 100g, Medium 150g, or Heavy 200g. Design Closed coil with eyelets for attaching directly to orthodontic brackets or hooks | 10 | pkt | gembuyercdu | 10 | |
| 28 | Niti compression open coil spring spool of 2 meter | Material Superelastic Nickel Titanium NiTi alloy. Lengths 2 metre spool Inner Diameter Arbor 0.030 primeprim 0.76 text | 5 | pkt | gembuyercdu | 10 | |
| 29 | Niti tension spring length 3mm pkt of 10 | Material Superelastic Nickel Titanium NiTi alloy. Lengths 3mm pre packaged with eyelets Inner Diameter (Arbor) 0.030 primeprime 0.76 text . Force Levels Generally classified as Light 100g, Medium 150, or Heavy 200 Design Closed coil with eyelets for attaching directly to orthodontic brackets or hook | 10 | pkt | gembuyercdu | 10 | |
| 30 | Crimpable hooks 019x025 pkt of 10 | Material Medical grade Stainless Steel. Archwire Compatibility Suitable for various, including rectangular e.g 0.019 times 0.025 , 0.018 times 0.025 and round wires Size Approx. 4.7mm - 5.5mm Surface Highly polished to reduce patient discomfort | 2 | pc | gembuyercdu | 10 | |
| 31 | Lingual button bondable pkt of 10 | Material High grade Stainless Steel hardened, corrosion-resistant or Aesthetic Ceramic Composite tooth-colored. Design Head Mushroom shape, polished to prevent patient irritation. Bondable Curved or flat with mesh structure for maximum bonding retention direct enamel adhesion. Medium Standard 3.5 4 mm Used for most general applications | 4 | pkt | gembuyercdu | 10 | |
| 32 | Lingual sheath pkt of 50 | Material High quality, medical grade stainless steel, offering corrosion resistance and biocompatibility. Dimensions Slot Sizes Commonly available in 036 inch internal diameters. Attachment Method Weldable Designed for welding onto Stainless Steel molar bands Length Commonly around 3.5mm for standard size | 1 | nos | gembuyercdu | 10 | |
| 33 | Orthodontic sleeve 0.019X 0.025 | Material Primarily soft medical grade silicone polyurethane or PVC. Biocompatibility Non toxic, latexfree, and resistant to degradation from saliva, temperature fluctuations, and plaque accumulation. Packaging Length Available in spoolsrolls ranging from 2 meters, 5 meters, to 10 12 feet approx. 3 4 meters. Color Option Transparent Clear for aesthetics | 2 | spool | gembuyercdu | 10 | |
| 34 | 0.010 SS Ligature Wire spool of 500gm | Material Medical grade, corrosion resistant stainless steel. Diameter Typically 010 Spool of wire Total weight 500gm | 2 | spool | gembuyercdu | 10 | |
| 35 | Separators pkt of 100 | Material Most common separators are made from high quality, latex free polyurethane elastomeric material. Types Elastomeric Rings O-rings Small, donut shaped rings that are stretched and inserted interproximally. Dimensions & Size Small Standard Generally sim 3mm diameter and 0 75mm thickness Pack Size Commonly sold in packs of 700 to 1000 often arranged on star-shaped sticks for easy handling | 5 | pkt | gembuyercdu | 10 | |
| 36 | Silver Solder spool | Composition Primarily Silver Ag, Copper Cu, and Zinc Zn Silver Content Commonly ranges between 4560. Cadmium Conten 0 Cadmium-free Lead Content 0 Lead free. MeltingFlow Point Typically ranges from 650 C to 700 C 1200F 1292 Wire Diameter Size Common Diameter 0.7mm to 0.8mm. Gauge Typically .025 in or 22 gauge. Form wire spool | 5 | coil | gembuyercdu | 10 | |
| 37 | Flux for silver solder | Composition Typically contains fluorides, potassium salts, and borates in a water base, ensuring it is generally CADMIUM FREE. Type Fluoride-based, paste consistency. Appearance White cream/paste. Melting Range Optimized for low-fusing silver solder, typically effective at temperatures around 650circtextC to 800 circ ex. Solubility Water-soluble can be reconstituted with distilled water | 5 | bott | gembuyercdu | 10 | |
| 38 | Bondable buccal tubes 0.022 MBT SWA for 1st molar set of 4 | Orthodontic weldable buccal tubes nonconvertible 1 Molar 0 point 022 MBT with hooks Compound contoured One piece metal injection method Lead in arch wire slot for easy insertion Bio compactible to bonding material 1 x pack of 04 buccal tubes two upper and two lower Material should supplied with mfg lot no expiry and of self life of 02 years | 40 | pkt | gembuyercdu | 10 | |
| 39 | OrthoKal dental plaster pkt of 03 kg | TypeClass Type III Class III High Strength Dental Stone. Color white Water Powder Ratio 28 ml 100 g. Mixing Time 15 seconds manual Working Time 5 to 6 minutes. Setting Time 8 minutes. Setting Expansion 0.10 to 0.20. Compressive Strength 1 hr 340 350 tex kg cm Compressive Strength 24 hr 700 text kgcm. | 8 | pkt | gembuyercdu | 10 | |
| 40 | Ortho relief wax transparent | Composition High quality medical grade paraffin wax, sometimes blended with beeswax or carnauba wax. Physical State Solid at room temperature becomes pliable and malleable when warmed by fingers. Appearance Typically clear, transparent, or white, designed to be discreet and invisible, though colored varieties e.g. pink exist. Dimensions Strip Approximately 4.7mm x 5.2mm x 300mm. Dimensions Case Commonly sold in small, portable plastic boxes, roughly 35mm x 20mm x 5mm, containing 5 6 strips. Flavors Available in unscented non-flavored, mint, strawberry, lemon, rose, and assorted options. Safety Profile Non toxic, food grade ingredients when FDA approved, safe for accidental ingestion, and suitable for all ages. Adhesion Formulated to stick to metal or ceramic brackets and wires even in a moist environment, though it is recommended to dry the appliance first. Melting Flammability Non flammable solid specifically designed for stability at oral temperatures | 200 | pkt | gembuyercdu | 10 | |
| 41 | Ortho vita Blue bond cement | Type Light cure compomer band cement. Colo Blue for visibility and easy removal Delivery Preloaded syringe 5g Consistency Tacky, low viscosity paste. Cure Time 30 seconds. Fluoride Release Yes, provides fluoride release to help prevent decalcification. Shelf Life 2 years (when properly stored Storage Room temperature or refrigeration | 5 | pkt | gembuyercdu | 10 | |
| 42 | IPR safe sided diamond bur set of 3 | Thickness Head Diameter Commonly available in increments of 0.1 tex mm 0.2 tex mm, 0.25tex mm, 0.3 textmm 0.4 textmm and 0.5 text mm to allow for progressive, controlled reduction Grit Usually Fine red band or Extra Fine yellow band for smooth, precise cutting and minimal polishing requirements. Shap Tapered pointed, Tapered round, or Flame-shaped to allow for precise interproximal insertion, often with a long neck to improve visibility. Shank Friction Grip FG standard, designed for high speed handpieces, or sometimes Handpiece HP for specialized hand held systems. Material Medical grade stainless steel with robust natural diamond coating | 5 | nos | gembuyercdu | 10 | |
| 43 | IPR safe sided diamond disc | Disc Thickness Common, precise thicknesses include 0.15 mm, 0.20 mm, and 0.30 mm. Coating Safe Sided These discs have diamond grit on only one side top or bottom, with the reverse side being smooth non abrasive to prevent damage to the adjacent tooth. Diameter Generally available in 18.0 mm to 22.0 mm, with popular smaller sizes like 19.0 mm for better control. Grit Sizes Fine Red Yellow Usually recommended for finishing and polishing. Medium Blue Typically used for primary enamel removal. Handpiece Compatibility Designed for use with low speed or contra-angle handpieces, generally operated at speeds around 5,000 to 10,000 RPM. Sterilization Must be autoclavable up to 250 F121 C or dry heat sterilizable up to 340 F 170 C. Mandrel Type Often used with a standard latch type RA mandrel. | 5 | nos | gembuyercdu | 10 | |
| 44 | Latex elastic blue , pkt of 1000 | Material High-quality medical-grade, biocompatible natural latex. Color Bright Blue. Sizes Diameter Commonly 1 4 inch 6.35mm, Force Levels Measured at 3 times diameter Medium 3.5 oz. 99 grams or 4.5 oz. 127.6 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer. | 1 | pkt | gembuyercdu | 10 | |
| 45 | Latex elastic yellow 5 16 light, pkt of 1000 | Material High-quality medical-grade, biocompatible natural latex. Color Bright Yellow. Sizes Diameter Commonly 3 8 inch 9.5mm Force Levels Measured at 3 times diameter Light 2 oz. 56.6 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer. | 2 | pkt | gembuyercdu | 10 | |
| 46 | Latex elastic red 5 16 heavy, pkt of 1000 | Material High quality medical grade, biocompatible natural latex. Color Red. Sizes Diameter 38 inch 9.5mm Force Levels Measured at 3 times diameter Heavy 6 oz. 170 grams or 6.5 oz. 184 grams. Packaging Usually supplied in packs of 1000, often with a free orthodontic placer. | 1 | pkt | gembuyercdu | 10 | |
| 47 | Advansync 2 Orthodontic Fixed Functional Appliance Size No. 5 | Design to allow simultaneous fixed orthodontic appliance treatment and reduce the two phase treatment and provide constant activation and minimize the need for patient compliance Allow freedom of mechanics mesial to the molar crown Provides a range of motion to support patient comfort Material should supplied with mfg lot no expiry and of self life of 02 years | 10 | nos | gembuyercdu | 10 | |
| 48 | Extra oral Elastic Packet Of 1000 | Material Most are made from medical or surgical grade natural latex to ensure high elasticity and rapid recovery. Heavy Extra Strong 14 oz 392g 400g). Lumen Diameter 516 inch (7.94 mm) Durability Latex versions offer superior force delivery consistency but are susceptible to degradation from intraoral temperature and saliva over time | 10 | pkt | gembuyercdu | 10 | |
| 49 | Forsus FRD L Pin 32 mm | The 3M Unitek Forsus Fatigue Resistant Device FRD LPin Module is a fixed, hybrid-functional appliance designed for Class II correction. The L Pin version uses a specialized locking pin for attachment, offering greater versatility in mounting options (including directly to the archwire via a mount Force Delivery Delivers a consistent, continuous force of approximately 200 grams approx. 2 Newtons) when fully activated Material Fatigue-resistant stainless steel Module Orientation Universal the Spring Module itself can be used on either the Left or Right side) | 15 | pc | gembuyercdu | 10 | |
| 50 | Torch for Butane Gas | Butane gas torches portable, high-temperature tools commonly used for soldering Typical Technical Specifications Fuel Type Standard butane canisters (often with a nozzle latch connection) Flame Temperature Up to 1300 degree centigrade Gas Consumption Approximately 50g to 140g per hour Material Usually copper, brass, or aluminum alloy with ABS plastic components Dimensions & Weight Length typically ranges between 15cm - 20cm, with a weight around 80g to 150g Features Adjustable flame, anti-flare technology, and safety lock for continuous use Safety 360 degree rotation allowed for use in tight, hard to reach areas | 6 | nos | gembuyercdu | 10 | |
| 51 | Disposable cheek retractor | Latex free flexible and comfortable Cheek Retractor provides retraction of lips and cheeks during dental treatments. Cheek Retractors with durable and long handle makes it easy to apply on the patients. The smooth surface makes it very comfortable for the patient. Autoclavable up to 134 degree celsius and is of following types Made of durable clear plastic for increased visibility Double span cheek retractor is designed for hands free use Opens the oral cavity widely without any pain Protects the sensitive gums during teeth whitening treatment Adult size | 6 | no | gembuyercdu | 10 | |
| 52 | Orthodontic tooth brush | Bristle Design V shaped or bracket groove cut, where center bristles are shorter to sit on brackets, while outer bristles clean the gum line. Bristle Type Ultra-soft or soft, with rounded tips to prevent enamel damage and gum recession. Filament Material Often made of Curen polyester or PBT polybutylene terephthalate which are more stable and stiff when wet compared to traditional nylon. Filament Diameter Very fine, typically 0 point 10 for improved penetration between wires and teeth. Filament Count Extremely high density, commonly 5,460 filaments per head, providing a wide cleaning surface. Brush Head Compact and slightly angled, allowing access to posterior teeth. Handle Often octagonal or ergonomic, assisting with proper 45 degree angle brushing | 60 | no | gembuyercdu | 10 | |
| 53 | Preventive anticaries toothpaste for orthodontic patients | Active Ingredient Amine Fluoride thousand ppm Form Past Indications Orthodontic treatment, enamel remineralization, anti cavity, and sensitivity protection Key Ingredients Sorbitol, Purified Water, Propylene Glycol, Silica mild abrasive, Cocamidopropyl Betaine foaming agent, Titanium Dioxide, Hydroxyethyl Cellulose Flavor Mild Mint Size 70 grams | 60 | no | gembuyercdu | 10 | |
| 54 | Bondable stainless steel orthodontic brackets set of 4 | Material High grade stainless steel is the standard for metal, providing corrosion resistance and strength Slot Sizes 0 point 022 Base Design 80 Gauge Mesh Standardized to provide a strong, retentive surface for adhesive. Laser Structured Retention Grooves Offer superior shear bond strength compared to standard mesh. Anatomical Contour Base is curved to match the natural contour of the tooth for better fit and reduced bond failure. Bonding Strength Clinically acceptable shear bond strength is generally considered to be 5.9 to 7.8 MPa. Profile Lowprofile designs are preferred to minimize patient discomfort and interference. | 30 | pkt | gembuyercdu | 10 | |
| 55 | Ceramic Orthodontic brackets 0.022 MBT | Material 99.9 pure alumina Monocrystalline Bracket Types Conventional Twin Siamese Slot Size Standardized point 022 slot systems. Prescriptions Commonly available in MBT, Roth, and Edgewise systems. Base Design Compound contour bases, often with sandblasted or undercut grooves for mechanical retention 3M Unitek Clarity Advance Known for low-profile, fine-grained ceramic, and stress-concentrator technology for easy debonding. | 30 | pkt | gembuyercdu | 10 | |
| 56 | Protective eye wear for composite light cure | composite light cure | 12 | no | gembuyercdu | 10 | |
| 57 | Toffelmiere matrix retainer | Material High grade stainless steel, typically medical grade, providing durability and corrosion resistance. Types Available in Universal Design Configuration Head U shaped frame Holds the band features three guide slots straight, left, right for different positionings. Locking Vis Sliding body that secures the band ends. Sterilization Fully autoclavable and reusable. Compatibility Works with standard matrix bands of varying thicknesses e.g 0.02 gauge Contra Angle Design Many models are designed with a contra angle angled head for both buccal and lingual application | 15 | no | gembuyercdu | 10 | |
| 58 | Bands for toffelmiere retainers | Material High-quality, corrosion-resistant, medical-grade stainless steel. Thickness 0 point 001 inch Dead-soft or ultra thin, offering higher flexibility. Shapes UniversalNo. 1 Flat, straight band suitable for most posterior cases. Dimensions Typically 5mm in width. Sterilization Autoclavable at standard temperatures | 30 | pkt | gembuyercdu | 10 | |
| 59 | Spandex transparent with wings for orthodontic use | Material 100 Medical Grade Silicone. Appearance ClearTransparent Autoclavable, capable of lasting up to 1,000 sterilization cycles. Comfort Soft and flexible compared to traditional hard plastic retractors. Sizes Available in Adult | 10 | no | gembuyercdu | 10 | |
| 60 | Orthodontic adhesive Transbond plus | Transbond plus Orthodontic color changing adhesives, are light-cured, resin based materials designed to transition from a colored state usually pink or blue to transparent upon curing. Color Transition Color changes from vibrant pink blue to clear tooth colored upon activation with a curing light, indicating successful bonding. Viscosity Medium to high viscosity, designed to prevent bracket drifting sliding during placement and to manage adhesive flow. Cure Time Fast, light-cure polymerization typically 6 10 seconds with high intensity LED lights). Moisture Tolerance Many e g Transbond Plus are designed to function in slightly moist conditions (hydrophilic) to improve reliability in challenging oral environments. Packaging Available in syringes | 10 | no | gembuyercdu | 10 |