TenderDekho Logo
GEM

Bids are Invited For Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste in EAST SINGHBHUM, JHARKHAND

Bid Publish Date

28-May-2025, 1:00 pm

Bid End Date

18-Jun-2025, 1:00 pm

EMD

₹83,505

Value

₹83,50,495

Location

EAST SINGHBUM , JHARKHAND

Progress

Issue28-May-2025, 1:00 pm
Technical17-06-2025 19:24:04
Financial
AwardCompleted
Explore all 5 tabs to view complete tender details

Quantity

19555

Bid Type

Two Packet Bid

Categories 145

BLOCK WORK WIND MILL ENERGY PROJECT APPARELS PRINTING SERVICES BILLIARD BALLS BRIDGE CONSTRUCTION ADDITION MATH KITS ANGLE BOOK CASE INCLINED SHAFT BATHROOM SET POLYETHYLENE PIPE MIRRORS BUILDING CONSTRUCTION PAINTING HOUSEHOLD ITEM ANGLE GLOBE VALVES STRUCTURE FABRICATION UPS CONSTRUCTION MATERIALS WOODEN TROLLEY COLORANTS SANITARY WARE WALL CONSTRUCTION AIR CYLINDERS DYES STEEL WINDOW PERISTALTIC PUMPS TOWEL BLOCK HANGER STONE FLOORING WHEAT FLOUR STRUCTURAL OFFSET PRINTING KAJUKATARI OIL AND GAS DRILLING EQUIPMENT HARDWARE AND FASTENERS GEYSER ACRYLIC PAINTS AUTOMOTIVE CLEANERS FERROUS ALLOY SUPPLY SILVER TIP DISTEMPER WOODEN PRODUCT STEEL BENCH STEEL TUBE CUP BOARD ARCHITECTURAL DRAWING CLOTHING ASH BRICK CHEQUERRED TILE COATING SERVICES RODS SUPPLY BLOCK CONSTRUCTION BED GOLD MEDAL STOMACHERS TILES AND FLAGSTONES ALUMINIUM ALLOY FURNITURE ITEMS MOULDED ITEM GLAZING PAINT SUPPLY WINDOW SCAFFOLDING TABLES MEDICAL RELATED EQUIPMENT AND SUPPLIES BLOCKS PAPER AND PRINTING SERVICES ATM HYDRAULIC BRAKE WATER STORAGE AND SUPPLY GLASSWARE TEA MUG RCC BLOCK CEMENT DOORS FITMENT ALUMINIUM PROFILE BRICK WORK UTG PIGMENTS COUNTERS BARE METAL BEARING HOLDERS ARCHERY BOWS BASSES TILE FLOORING BOLTS WASHERS DINING TABLE RCC WORK ALUMINIUM FRAME GRANITE NUTS ACID MASONARY WORK CLAY ITEMS BUFFS GROUTING PROVISION OF TILE VALVE WATER SUPPLY MATERIAL ENAMELING PAINTS AND ACCESSORIES BEAM FABRICATION AND CASTING CABLE STAYED CLAY CRAFT SAND SUPPLY CLAMPS EMULSION PAINT SQUATTING PLATE PAINTS AND PRIMERS FIBERS THREADS AND YARNS FARINOGRAPH WHITE WASH ALUMINUM SUPPLY GEMS AND JEWELLERY ANGLE COCK TRANSITION METALS BATHROOM TISSUE DISPENSER FABRICATOR MACHINE PLASTIC VALVE PARTS AND ACCESSORIES RECIPROCATING PUMPS ESCRAP FLUSH DOOR FR1 SCREWS BRICK PEB PIPES UPVC PIPE PAINTS STEEL SUPPLY BLOCK BOARD LIME CONSTRUCTION VENETIAN BLIND BARREL MANUFACTURING SERVICES SHIFTING OF MATERIAL PAINTING MATERIAL TRANSPORTATION CRANE

A tender has been published for Uranium Corporation Of India Limited Demolishing cement concrete, Dismantling tile work in floors and roofs, Dismantling of flushing cistern, Dismantling doors, windows and clerestory windows, Providing and laying plain Cement concrete, Providing and laying in position reinforced cement concrete work, Providing and laying Steel reinforcement for R. C. C. work, Providing and fixing centering and shuttering, Providing 15 mm thick cement plaster, Providing and fixing Ist quality ceramic glazed wall tiles, Providing and laying Vitrified tiles in different sizes, Providing and applying two coats of white washing, Providing and applying one coat of cement primer, Providing and applying wall painting with acrylic emulsion paint, Supplying and laying Two or more Coats Painting with synthetic enamel paint, Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, Providing and fixing 35mm thick ISI marked flush door shutters, Providing and fixing ISI marked oxidised M. S. handles, Providing and fixing oxidised M. S. casement stays, Providing and fixing water closet squatting pan, Providing and fixing white vitreous china pedestal type water closet, Providing and fixing ISI marked oxidised M. S. tower bolt, Providing and fixing glass panes, White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps. , White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer, Providing and fixing 15 mm nominal bore C. P brass angle valve for basin mixer and geyser points, Providing and fixing C. P. brass stop cock, Providing and fixing C. P. brass bib cock, Providing and fixing 600x450mm bevelled edge mirror of superior glass, Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats, Providing and fixing 600x120x5 mm glass shelf with edges round off, Providing and fixing C. P. brass toilet paper holder, Providing and fixing C. P. brass shower rose with 15 or 20mm inlet, Providing and fixing one piece construction white vitreous china squatting plate, Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin, 15 mm dia nominal bore, 20 mm dia nominal bore, 25 mm dia nominal bore, 75mm dia Sand cast iron S and S pipe, 100 mm dia Sand cast iron S and S pipe, Half brick masonry with common burnt clay, Providing and fixing 18 mm thick granite of any size, colour and shade, Providing and fixing 10 mm thick acid and or alkali resistant tiles, Providing and fixing 25mm thick Cup board shutter ISI marked, Providing and fixing 15 mm nominal bore C. P. brass long body bib cock, Providing and fixing white vitreous china laboratory sink, Structural steel work in single section, fixed with or without connecting plate in EAST SINGHBHUM, JHARKHAND. Quantity: 19555 by. Submission Deadline: 18-06-2025 13: 00: 00. Check eligibility and apply.

Documents 5

GeM-Bidding-7896404.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Dismantling doors as per scope of work,Providing and fixing ISI marked flush door shutters as per s

Manohar Parrikar Idsa

Posted: 6 December 2024
Closed: 31 December 2024
GEM

Removing dry or oil bound distemper water proofing cement paint and the like by scrapping and sand

Envis Centres (environmental Information System) Ministry Of Environment Forest And Climate Change

DODA, JAMMU & KASHMIR

Posted: 24 September 2025
Closed: 15 October 2025
GEM

Floor Tiles,Wall Tiles,Electrical Work,Windows,Door or Mesh Door,Renovation of Kitchen,Renovation o

Central Board Of Direct Taxes (cbdt)

KANPUR NAGAR, UTTAR PRADESH

Posted: 1 August 2025
Closed: 22 August 2025
GEM

Earth work in excavation,Filling available excavated earth,Supplying and filling in plinth,Excavati

Uranium Corporation Of India Limited

EAST SINGHBHUM, JHARKHAND

Posted: 17 June 2025
Closed: 17 July 2025
GEM

Indian Navy Renovation & Fit-Out Tender 2025 Vizag MSAA– Interior Works including Granite ACP Tiles IS standards

Indian Navy

Posted: 26 December 2025
Closed: 5 January 2026
GEM

Bill of Quantities (BOQ) 47 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Demolishing cement concrete Demolishing cement concrete including disposal of materials, within 50M lead. Concrete mix. 1/3/6 - (Cement concrete or richer mix.) 40 cum dgmauto 360
2 Dismantling tile work in floors and roofs Dismantling tile work in floors and roofs laid in cement mortar or terrazo flooring skirting ranking out joints and cleaning the surface for plaster including the disposal of rubbish to the dumping ground within one KM lead as per directions of Engineer -in-charge. 2,430 sqm dgmauto 360
3 Dismantling of flushing cistern Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal unserviceable materials within 50 metres lead all complete as per specifications and instruction of Engineer-in-charge. 25 each dgmauto 360
4 Dismantling doors, windows and clerestory windows Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below 150 each dgmauto 360
5 Providing and laying plain Cement concrete Providing and laying plain Cement concrete 1/3/6 (1 cement /3 coarse sand / 6 graded stone aggregate 40mm nominal size) in foundation, Plinth wherever necessary including desalinating, finishing, Curing etc. as per specification all complete but excluding the cost of centering and shuttering etc. 40 cum dgmauto 360
6 Providing and laying in position reinforced cement concrete work Providing and laying in position reinforced cement concrete work 1/ 2 / 4 (1 cement / 2 coarse sand / 4 graded stone aggregate 20mm nominal size) in walls, beam, lintel, chujja roof upto floor five level including all complete as per specification drawing and direction of the Engineer-in-charge but excluding the cost of centering, shuttering and reinforcement. 18 cum dgmauto 360
7 Providing and laying Steel reinforcement for R.C.C. work Providing and laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete as per specification and instruction of Engineer-in-charge. Tor Steel 1,800 kg dgmauto 360
8 Providing and fixing centering and shuttering Providing and fixing centering and shuttering including strutting, propping etc. and removal of form for - Foundation, footings, bases of column etc. for mass concrete. 220 sqm dgmauto 360
9 Providing 15 mm thick cement plaster Providing 15 mm thick cement plaster to a rough side in cement mortar 1/6 (1 cement / 6 fine sand) including scaffolding, raking the joints, backing the surface finishing to correct lines, levels plumb curing as required. 1,450 sqm dgmauto 360
10 Providing and fixing Ist quality ceramic glazed wall tiles Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS- 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1/3(1 cement / 3 coarse sand) and jointing with grey cement slurry at 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete as per specification and instruction of Engineer- in-charge. 1,800 sqm dgmauto 360
11 Providing and laying Vitrified tiles in different sizes Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1/4 (1 cement/ 4 coarse sand), jointing with grey cement slurry at 3.3kg per sqm including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 600x600 mm or as per instruction of Engineer- in-charge. 750 sqm dgmauto 360
12 Providing and applying two coats of white washing Providing and applying two coats of white washing with lime on old work as per composition mentioned below to give an even shade including scaffolding etc. upto floor four level complete including removing old white wash. (composition- 5 litre water per kg of lime for making cream fevicol DDL - as per manufacturer recommendation. Robin blue make (P and G) at 5 gm per litre of lime wash.( Lime powders blue. Fevicol DDL will be arranged by contractors) 900 sqm dgmauto 360
13 Providing and applying one coat of cement primer Providing and applying one coat of cement primer (internal walls surface) of approved brand all complete as per specification and instruction of Engineer- in-charge. 1,750 sqm dgmauto 360
14 Providing and applying wall painting with acrylic emulsion paint Providing and applying wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade - Two or more coats . 1,750 sqm dgmauto 360
15 Supplying and laying Two or more Coats Painting with synthetic enamel paint Supplying and laying Two or more Coats Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade all complete as per specification and instruction of Engineer- in-charge. 750 sqm dgmauto 360
16 Providing and fixing factory made ISI marked steel glazed doors ,windows and ventilators Providing and fixing factory made ISI marked steel glazed doors ,windows and ventilators top hung of standard rolled steel sections, joints metered and welded with 15X3mm lugs , 10 cm long ,embedded in cement concrete blocks 15X10X10 cm of C.C. 1/3/6 ( 1 cement / 3 coarse sand / 6 graded stone aggregate 20mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, but excluding providing and fixing of glass panes and other fittings to be paid separately, all complete including applying a priming coat of approved steel primer and the cost of metal beading and other fitting necessary hinges or pivots as required. 750 kg dgmauto 360
17 Providing and fixing 35mm thick ISI marked flush door shutters Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS - 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - sizes including fixing the handles, hinges, tower bolt, aldrops etc. wherever necessary. All the serviceable fittings of dismantled door shutter should be removed and refitted in the new door shutter other required fittings are to be supplied by the Contractor . 166 sqm dgmauto 360
18 Providing and fixing ISI marked oxidised M.S. handles Providing and fixing ISI marked oxidised M.S. handles conforming to IS - 4992 with necessary screws etc. complete - 125 mm 232 each dgmauto 360
19 Providing and fixing oxidised M.S. casement stays Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 200 each dgmauto 360
20 Providing and fixing water closet squatting pan Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size - 580x440 mm with integral type foot rests . 36 each dgmauto 360
21 Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid 12 each dgmauto 360
22 Providing and fixing ISI marked oxidised M.S. tower bolt Providing and fixing ISI marked oxidised M.S. tower bolt size 250x10 mm black finish, (Barrel type) with necessary screws etc. complete. 280 nos dgmauto 360
23 Providing and fixing glass panes Providing and fixing glass panes 4mm thick with putty and glazing clips in steel doors, windows, clerestory windows, all complete . 50 sqm dgmauto 360
24 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps . 28 each dgmauto 360
25 White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer (Essco/Jaguar) of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required - (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Make - Hindustan/Hindware) 2 each dgmauto 360
26 Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality including all complete as per specification and instruction of Engineer- in-charge. 2 each dgmauto 360
27 Providing and fixing C.P. brass stop cock Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make to conforming to IS - 8931. 92 each dgmauto 360
28 Providing and fixing C.P. brass bib cock Providing and fixing C.P. brass bib cock of approved quality conforming to IS - 8931 15 mm nominal bore 66 each dgmauto 360
29 Providing and fixing 600x450mm bevelled edge mirror of superior glass Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (All materials supplied by the contractor) (Make Modi Guard) . 20 each dgmauto 360
30 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 20 each dgmauto 360
31 Providing and fixing 600x120x5 mm glass shelf with edges round off Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 20 each dgmauto 360
32 Providing and fixing C.P. brass toilet paper holder Providing and fixing C.P. brass toilet paper holder or as per direction of Engineer -in-Charge (Make - OMCO/ESSCO) 12 each dgmauto 360
33 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet Providing and fixing C.P. brass shower rose with 15 or 20mm inlet (C.P. shower rose supplied by the contractor) Make - OMCO 100 MM diameter. 12 each dgmauto 360
34 Providing and fixing one piece construction white vitreous china squatting plate Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required - Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 14 set dgmauto 360
35 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 15 set dgmauto 360
36 15 mm dia nominal bore Providing and fixing G.I. pipes complete with G.I. fittings including cutting and making good the wall - 15 mm dia nominal bore 500 rm dgmauto 360
37 20 mm dia nominal bore Providing and fixing G.I. pipes complete with G.I. fittings including cutting and making good the wall - 20 mm dia nominal bore 400 rm dgmauto 360
38 25 mm dia nominal bore Providing and fixing G.I. pipes complete with G.I. fittings including cutting and making good the wall - 25 mm dia nominal bore 400 rm dgmauto 360
39 75mm dia Sand cast iron S and S pipe Providing and fixing soil, waste and vent pipes including all complete as per specification and instruction of Engineer- in-charge. - 75mm dia Sand cast iron S and S pipe as per IS - 1729 200 rm dgmauto 360
40 100 mm dia Sand cast iron S and S pipe Providing and fixing soil, waste and vent pipes including all complete as per specification and instruction of Engineer- in-charge. - 100 mm dia Sand cast iron S and S pipe as per IS - 1729 200 rm dgmauto 360
41 Half brick masonry with common burnt clay Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 (1 cement / 4 coarse sand) 70 sqm dgmauto 360
42 Providing and fixing 18 mm thick granite of any size,colour and shade Providing and fixing 18 mm thick granite of any size,colour and shade, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1 / 4 (1 cement / 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. all complete as per specification and instruction of Engineer- in-charge. Area of slab over 0.50 sqm . 125 sqm dgmauto 360
43 Providing and fixing 10 mm thick acid and or alkali resistant tiles Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS - 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1/4 (1 acid proof cement / 4 coarse sand) 50 sqm dgmauto 360
44 Providing and fixing 25mm thick Cup board shutter ISI marked Providing and fixing 25mm thick Cup board shutter ISI marked conforming to IS - 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both facesof shutters - including ISI marked nickel plated bright finished M.S. piano hinges, nobs, hapse and staples with necessary screws including a coat of wooden primer. 100 sqm dgmauto 360
45 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 72 each dgmauto 360
46 Providing and fixing white vitreous china laboratory sink Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required - Size 450x300x150 mm (Make - Parryware/Hindware) 36 each dgmauto 360
47 Structural steel work in single section, fixed with or without connecting plate Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1,500 kg dgmauto 360

Required Documents

1

Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

2

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Results

S.No Seller Item Date Status
1adivasi welfare society   Under PMA-17-06-2025 19:24:04Disqualified
2K.G. ENTERPRISES   Under PMA-16-06-2025 07:25:54Qualified
3KEW CONSTRUCTIONS PVT. LTD.   Under PMA-16-06-2025 09:02:35Qualified
4M/S PRADIP KUMAR GUPTA   Under PMA-15-06-2025 17:41:44Qualified
5M/s S.S.CONSTRUCTION   Under PMA-17-06-2025 22:23:06Disqualified
6MANORANJAN KUMAR CONSTRUCTION PRIVATE LIMITED   Under PMA-13-06-2025 21:09:03Qualified
7MS A.K.ENTERPRISES   Under PMA-17-06-2025 20:33:20Qualified
8R.K. SINGH   Under PMA-17-06-2025 23:46:46Disqualified
9VARUN ENTERPRISES   Under PMA-18-06-2025 12:07:29Disqualified

Financial Results

Rank Seller Price Item
L1MS A.K.ENTERPRISES(MSE,MII)( MSE Social Category:General )    Under PMA₹57,35,200Item Categories : Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste
L2M/S PRADIP KUMAR GUPTA (MSE,MII)( MSE Social Category:General )    Under PMA₹63,73,140Item Categories : Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste
L3MANORANJAN KUMAR CONSTRUCTION PRIVATE LIMITED (MSE,MII)( MSE Social Category:General )    Under PMA₹65,94,285Item Categories : Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste
L4K.G. ENTERPRISES (MSE,MII)( MSE Social Category:General )    Under PMA₹79,64,255Item Categories : Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste
L5KEW CONSTRUCTIONS PVT. LTD. (MSE,MII)( MSE Social Category:General )    Under PMA₹94,09,830Item Categories : Demolishing cement concrete,Dismantling tile work in floors and roofs,Dismantling of flushing ciste

Frequently Asked Questions

Key insights about JHARKHAND tender market

What are the eligibility requirements for tender GEM/2025/B/6281496?

The eligibility requirements include being a registered entity with relevant licenses to operate in construction and renovation projects. Participants must have previous experience in similar projects, demonstrating a proven track record, as well as a sufficient financial background to ensure the completion of the contract as per standards.

What certificates are required for this renovation tender?

Bidders are required to submit various certificates, such as quality assurance certifications for materials, company registration documents, and previous project completion certificates. Additionally, a solvency certificate from a recognized financial institution may be necessary to establish financial capability.

What is the registration process for participating in this tender?

The registration process entails submitting an official application through the designated portal. Bidders should upload all relevant documents in the accepted formats, ensuring compliance with the submission guidelines outlined in the tender documentation.

What formats are accepted for document submissions?

All documents must be submitted in accepted document formats, specifically PDF for technical and financial proposals, and specific formats as instructed in the tender guidelines. Adhering to these formats helps streamline the evaluation process.

What are the performance security requirements for this tender?

Bidders are required to submit performance security in the form of a bank guarantee or demand draft, amounting to a specified percentage of the total tender value. This security ensures that the contractor fulfills the obligations set forth in the contract and adheres to the timelines and quality standards.