Contract Bidding Open For mill fabrication work 1,mill fabrication work 2,mill fabrication work 3,mill fabrication work 4,mil in BIJNOR, UTTAR PRADESH
Bid Publish Date
29-Aug-2026, 9:59 am
Bid End Date
08-Sep-2026, 10:00 am
EMD
₹6,000
Value
₹5,90,000
Location
Progress
Public procurement opportunity for N/a mill fabrication work 1, mill fabrication work 2, mill fabrication work 3, mill fabrication work 4, mill fabrication work 5, mill fabrication work 6, mill fabrication work 7, mill fabrication work 8, mill fabrication work 9, mill fabrication work 10, mill fabrication work 11, mill fabrication work 12, mill fabrication work 13, mill fabrication work 14, mill fabrication work 15, mill fabrication work 16, mill fabrication work 17, mill fabrication work 18, mill fabrication work 19, mill fabrication work 20, mill fabrication work 21, mill fabrication work 22, mill fabrication work 23, mill fabrication work 24, mill fabrication work 25, mill fabrication work 26, mill fabrication work 27, mill fabrication work 28, mill fabrication work 29, mill fabrication work 30, mill fabrication work 31, mill fabrication work 32, mill fabrication work 33, mill fabrication work 34, mill fabrication work 35, mill fabrication work 36, mill fabrication work 37, mill fabrication work 38, mill fabrication work 39, mill fabrication work 40, mill fabrication work 41, mill fabrication work 42 in BIJNOR, UTTAR PRADESH. Quantity: 3677 issued by. Submission Deadline: 08-09-2026 10: 00: 00. View full details and respond.
Tender Data
Bid Details
Quantity
3677
Category
mill fabrication work 1
Bid Type
Two Packet Bid
Bid Validity
30 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
No
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
2
Past Performance
50 %
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
mill fabrication work 1 , mill fabrication work 2 , mill fabrication work 3 , mill fabrication work 4 , mill fabrication work 5 , mill fabrication work 6 , mill fabrication work 7 , mill fabrication work 8 , mill fabrication work 9 , mill fabrication work 10 , mill fabrication work 11 , mill fabrication work 12 , mill fabrication work 13 , mill fabrication work 14 , mill fabrication work 15 , mill fabrication work 16 , mill fabrication work 17 , mill fabrication work 18 , mill fabrication work 19 , mill fabrication work 20 , mill fabrication work 21 , mill fabrication work 22 , mill fabrication work 23 , mill fabrication work 24 , mill fabrication work 25 , mill fabrication work 26 , mill fabrication work 27 , mill fabrication work 28 , mill fabrication work 29 , mill fabrication work 30 , mill fabrication work 31 , mill fabrication work 32 , mill fabrication work 33 , mill fabrication work 34 , mill fabrication work 35 , mill fabrication work 36 , mill fabrication work 37 , mill fabrication work 38 , mill fabrication work 39 , mill fabrication work 40 , mill fabrication work 41 , mill fabrication work 42
Advisory Bank
PUNJAB NATIONAL BANK
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
60
Delivery Locations
1
Delivery Cities
Bijnor
Delivery Pincodes
246763
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Anurag Singh | 246763,KISAN SAHKARI CHINI MILLS LTD., Sneh Road Najibabad PIN CODE- 246763 GST NO - 09AAAAK1634P1ZD Contact no- 9411427852,6397805612 | Bijnor | Uttar Pradesh | 246763 | 18 | 60 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9808798.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
42 Items Sign in to view GEM price trends Sign in for GEM prices
mill fabrication work 1
Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (8inch).
mill fabrication work 2
Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (6inch).
mill fabrication work 3
Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (4inch).
mill fabrication work 4
Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (3inch).
mill fabrication work 5
Fabricate and install bends at various locations in the mill house (6inch).
mill fabrication work 6
Fabricate and install bends at various locations in the mill house (4inch).
mill fabrication work 7
Fabricate and install flanges at various locations in the mill house (10inch).
mill fabrication work 8
Fabricate and install flanges at various locations in the mill house (8inch).
mill fabrication work 9
Fabricate and install flanges at various locations in the mill house (6inch).
mill fabrication work 10
Fabricate and install flanges at various locations in the mill house (4inch).
mill fabrication work 11
Fabricate and install flanges at various locations in the mill house (3inch).
mill fabrication work 12
Fabricate and install nipples at various locations in the mill house (8inch).
mill fabrication work 13
Fabricate and install nipples at various locations in the mill house (6inch).
mill fabrication work 14
Fabricate and install nipples at various locations in the mill house (3inch).
mill fabrication work 15
Fabricate and install nipples at various locations in the mill house (1inch).
mill fabrication work 16
Fabricate and install reducers at various locations in the mill house (8inch).
mill fabrication work 17
Fabricate and install reducers at various locations in the mill house (6inch).
mill fabrication work 18
Replace the damaged side plates and bottom plates of the cane carrier, leveler, chopper, secondary rake carrier, and rake carrier with the supplied plates (6/8/10 mm thick plates).
mill fabrication work 19
Cut and remove the old runners of the cane carrier, secondary rake carrier, and inter rake carrier, and install new runners.
mill fabrication work 20
Remove the corroded angles, beams, and channels beneath the runners of the cane carrier supporting angle, secondary rake carrier, and inter rake carrier, and install new angles in their place.
mill fabrication work 21
Cut and remove the old trough of the inter rake carrier and secondary rake carrier installed in the mill house, fabricate and install a new trough using the supplied 8/10 mm plate as per instructions, and conduct a satisfactory trial.
mill fabrication work 22
Cut, remove, reinstall the mill hole trough.
mill fabrication work 23
Cut and remove the tray beneath the mill TRPF, fabricate and install a new tray using the supplied 10/12 mm thick plate, and conduct a satisfactory trial.
mill fabrication work 24
Fabricate new juice rings for the mill rollers using 6/8 mm thick plate as per the sample.
mill fabrication work 25
Dismantle the damaged side plate of the fibrizer, place it in the scrap yard, fabricate and install new side plates using the supplied 8/10 mm thick plate as before, and conduct a satisfactory trial.
mill fabrication work 26
Cut and remove the worn bed of the tail shaft of the secondary rake carrier and fabricate and install a new one using a supplied 200 mm beam.
mill fabrication work 27
Fabricate and install a new guard for the mill crown pinion and place the old damaged guard in the scrap yard.
mill fabrication work 28
Remove the damaged angles of the side plates of the cane carrier, secondary rake carrier, and inter rake carrier, and install new angles in their place.
mill fabrication work 29
Remove the damaged juice tray of the TRPF rollers installed on the mill head stocks, place it in the scrap yard, fabricate a new tray from the supplied 8/10 mm plate, and install it in its original position.
mill fabrication work 30
Remove the 12inch size header installed on the mill screen juice line, fabricate a new header as per the sample, complete all connections as before, and conduct a satisfactory trial.
mill fabrication work 31
Fabricate a new delivery header for the screen juice tank (10inch size, 2.1 m length) along with 8 and 10 nipples, fabricate and erect it as per the sample, and conduct a satisfactory trial.
mill fabrication work 32
Cut the damaged top cover of the mill TRPF, cut the supplied 8/10 mm plate, fabricate it as per the sample, install it in its original position using the supplied 8/10 mm plate.
mill fabrication work 33
Dismantle the TRPF bottom cover of Mill No. 2, place it in the scrap yard, fabricate a new cover from the supplied 8/10 mm plate, install it in position, and conduct a trial.
mill fabrication work 34
Dismantle the weak and damaged plates on both sides and the back of the chute of Mill No. 2 TRPF installed in the mill house, place them in the scrap yard, fabricate and install new plates using the supplied 10/12 mm thick plate as before, and conduct a satisfactory trial.
mill fabrication work 35
Remove the old and damaged rail of the crane unloader trolley, install the supplied new rail (40 X 40 mm), strengthen it, and conduct a trial.
mill fabrication work 36
Fabricate and install new covers for the mill bearing housing.
mill fabrication work 37
Fabricate and install the juice distribution tray in the pipeline of the mill juice pumps.
mill fabrication work 38
Carry out welding of the mill TRPF rollers and repair by installing and welding the cut side plate.
mill fabrication work 39
Repair the racks of the secondary and inter rake carriers.
mill fabrication work 40
Weld the cut tail bar of the mill and fabricate it to the required size.
mill fabrication work 41
Carry out pineapple chevron grooving and cutting work on the mill rollers.
mill fabrication work 42
Carry out on-site forging of the side links of the cane carrier, bagasse carrier, elevator, and RBC chain, and fit pins and bushes as required to achieve the specified size.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | mill fabrication work 1 | Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (8inch). | 18 | pcdm | buyer10.cdgvvdup.up | 60 | |
| 2 | mill fabrication work 2 | Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (6inch). | 95 | pcdm | buyer10.cdgvvdup.up | 60 | |
| 3 | mill fabrication work 3 | Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (4inch). | 60 | pcdm | buyer10.cdgvvdup.up | 60 | |
| 4 | mill fabrication work 4 | Dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (3inch). | 30 | pcdm | buyer10.cdgvvdup.up | 60 | |
| 5 | mill fabrication work 5 | Fabricate and install bends at various locations in the mill house (6inch). | 6 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 6 | mill fabrication work 6 | Fabricate and install bends at various locations in the mill house (4inch). | 3 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 7 | mill fabrication work 7 | Fabricate and install flanges at various locations in the mill house (10inch). | 8 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 8 | mill fabrication work 8 | Fabricate and install flanges at various locations in the mill house (8inch). | 6 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 9 | mill fabrication work 9 | Fabricate and install flanges at various locations in the mill house (6inch). | 10 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 10 | mill fabrication work 10 | Fabricate and install flanges at various locations in the mill house (4inch). | 12 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 11 | mill fabrication work 11 | Fabricate and install flanges at various locations in the mill house (3inch). | 16 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 12 | mill fabrication work 12 | Fabricate and install nipples at various locations in the mill house (8inch). | 6 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 13 | mill fabrication work 13 | Fabricate and install nipples at various locations in the mill house (6inch). | 8 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 14 | mill fabrication work 14 | Fabricate and install nipples at various locations in the mill house (3inch). | 2 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 15 | mill fabrication work 15 | Fabricate and install nipples at various locations in the mill house (1inch). | 18 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 16 | mill fabrication work 16 | Fabricate and install reducers at various locations in the mill house (8inch). | 2 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 17 | mill fabrication work 17 | Fabricate and install reducers at various locations in the mill house (6inch). | 2 | pcdn | buyer10.cdgvvdup.up | 60 | |
| 18 | mill fabrication work 18 | Replace the damaged side plates and bottom plates of the cane carrier, leveler, chopper, secondary rake carrier, and rake carrier with the supplied plates (6/8/10 mm thick plates). | 180 | meter square | buyer10.cdgvvdup.up | 60 | |
| 19 | mill fabrication work 19 | Cut and remove the old runners of the cane carrier, secondary rake carrier, and inter rake carrier, and install new runners. | 350 | per meter | buyer10.cdgvvdup.up | 60 | |
| 20 | mill fabrication work 20 | Remove the corroded angles, beams, and channels beneath the runners of the cane carrier supporting angle, secondary rake carrier, and inter rake carrier, and install new angles in their place. | 180 | per meter | buyer10.cdgvvdup.up | 60 | |
| 21 | mill fabrication work 21 | Cut and remove the old trough of the inter rake carrier and secondary rake carrier installed in the mill house, fabricate and install a new trough using the supplied 8/10 mm plate as per instructions, and conduct a satisfactory trial. | 4 | each | buyer10.cdgvvdup.up | 60 | |
| 22 | mill fabrication work 22 | Cut, remove, reinstall the mill hole trough. | 2 | each | buyer10.cdgvvdup.up | 60 | |
| 23 | mill fabrication work 23 | Cut and remove the tray beneath the mill TRPF, fabricate and install a new tray using the supplied 10/12 mm thick plate, and conduct a satisfactory trial. | 1 | each | buyer10.cdgvvdup.up | 60 | |
| 24 | mill fabrication work 24 | Fabricate new juice rings for the mill rollers using 6/8 mm thick plate as per the sample. | 6 | each | buyer10.cdgvvdup.up | 60 | |
| 25 | mill fabrication work 25 | Dismantle the damaged side plate of the fibrizer, place it in the scrap yard, fabricate and install new side plates using the supplied 8/10 mm thick plate as before, and conduct a satisfactory trial. | 1 | lumpsum | buyer10.cdgvvdup.up | 60 | |
| 26 | mill fabrication work 26 | Cut and remove the worn bed of the tail shaft of the secondary rake carrier and fabricate and install a new one using a supplied 200 mm beam. | 1 | lumpsum | buyer10.cdgvvdup.up | 60 | |
| 27 | mill fabrication work 27 | Fabricate and install a new guard for the mill crown pinion and place the old damaged guard in the scrap yard. | 2 | each | buyer10.cdgvvdup.up | 60 | |
| 28 | mill fabrication work 28 | Remove the damaged angles of the side plates of the cane carrier, secondary rake carrier, and inter rake carrier, and install new angles in their place. | 65 | per meter | buyer10.cdgvvdup.up | 60 | |
| 29 | mill fabrication work 29 | Remove the damaged juice tray of the TRPF rollers installed on the mill head stocks, place it in the scrap yard, fabricate a new tray from the supplied 8/10 mm plate, and install it in its original position. | 2 | each | buyer10.cdgvvdup.up | 60 | |
| 30 | mill fabrication work 30 | Remove the 12inch size header installed on the mill screen juice line, fabricate a new header as per the sample, complete all connections as before, and conduct a satisfactory trial. | 1 | each header | buyer10.cdgvvdup.up | 60 | |
| 31 | mill fabrication work 31 | Fabricate a new delivery header for the screen juice tank (10inch size, 2.1 m length) along with 8 and 10 nipples, fabricate and erect it as per the sample, and conduct a satisfactory trial. | 1 | each header | buyer10.cdgvvdup.up | 60 | |
| 32 | mill fabrication work 32 | Cut the damaged top cover of the mill TRPF, cut the supplied 8/10 mm plate, fabricate it as per the sample, install it in its original position using the supplied 8/10 mm plate. | 1 | lumpsum | buyer10.cdgvvdup.up | 60 | |
| 33 | mill fabrication work 33 | Dismantle the TRPF bottom cover of Mill No. 2, place it in the scrap yard, fabricate a new cover from the supplied 8/10 mm plate, install it in position, and conduct a trial. | 1 | each | buyer10.cdgvvdup.up | 60 | |
| 34 | mill fabrication work 34 | Dismantle the weak and damaged plates on both sides and the back of the chute of Mill No. 2 TRPF installed in the mill house, place them in the scrap yard, fabricate and install new plates using the supplied 10/12 mm thick plate as before, and conduct a satisfactory trial. | 1 | each | buyer10.cdgvvdup.up | 60 | |
| 35 | mill fabrication work 35 | Remove the old and damaged rail of the crane unloader trolley, install the supplied new rail (40 X 40 mm), strengthen it, and conduct a trial. | 36 | per meter | buyer10.cdgvvdup.up | 60 | |
| 36 | mill fabrication work 36 | Fabricate and install new covers for the mill bearing housing. | 4 | each | buyer10.cdgvvdup.up | 60 | |
| 37 | mill fabrication work 37 | Fabricate and install the juice distribution tray in the pipeline of the mill juice pumps. | 2 | each | buyer10.cdgvvdup.up | 60 | |
| 38 | mill fabrication work 38 | Carry out welding of the mill TRPF rollers and repair by installing and welding the cut side plate. | 4 | each | buyer10.cdgvvdup.up | 60 | |
| 39 | mill fabrication work 39 | Repair the racks of the secondary and inter rake carriers. | 20 | each | buyer10.cdgvvdup.up | 60 | |
| 40 | mill fabrication work 40 | Weld the cut tail bar of the mill and fabricate it to the required size. | 2 | each | buyer10.cdgvvdup.up | 60 | |
| 41 | mill fabrication work 41 | Carry out pineapple chevron grooving and cutting work on the mill rollers. | 8 | each | buyer10.cdgvvdup.up | 60 | |
| 42 | mill fabrication work 42 | Carry out on-site forging of the side links of the cane carrier, bagasse carrier, elevator, and RBC chain, and fit pins and bushes as required to achieve the specified size. | 2,500 | each | buyer10.cdgvvdup.up | 60 |
Categories
59
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer