Government Tender Published for ISMB 150 RSJ 150x75mmWt 15.00 Kg RM,ISMB 150 RSJ 150x75mm Wt 15.00 Kg Rm,ISMB 150 RSJ 150x75mm Wt 1 in BARAMULLA, JAMMU & KASHMIR

4.00 mtr long for Comd Post area confirming to IS 808 1973 including one coat on red oxide primer

for Comd Post area confirming to IS 808 1973 including one coat on red oxide primer

of 1500mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts and bots system and including welding work complete as directed by buyer including one coat on red oxide primer Steel shall conform to IS 800

complete with set of 14 Nos MS hexagonal nuts Bolts and washers 12mm dia 40mm long and a spanner OJDE of size 20 22 per 10 Nos of SRT Weight of each SRT shall not be less than 24 Kgs SRT shall be painted with two coats of synthetic enamel paint OG colour over a coat of red oxide primer

and shutter outer frame made of angle 35 x 35 x 5 mm covered with 2mm thick black carbon sheet welded riveted on shutter frame work Bracing 02 Nos x 1.22m long MS flat 50x6mm at braces in middle and 02 Nos diogonal bracing support to be provided made of MS FI 50x6mm at top and bottom door panels. 3 Nos 150mm butt hinges 2 Nos MS tower bolt 200mm long 01 at Top and 01 at bottom of shutter 2 Nos MS bow handle 125mm long two No MS sliding bolt 230mm long of 20mm dia plain round bar including all requisite iron mongery fittings with steel door Applying two coat of synthetic enemal paint OG over one coat of red oxide primer before supply of door complete All materials shall conforming to relevant IS

as frame work and and necessary FI to be fixed for sliding arregement with 6mm thick MS plate sliding shutter size of 300x600mmx6mm 02 Nos with two bow handles for each are also provided for easy opening and shifting the shutters Externally Acrylic sheet bottom hung shutters will be provided including iron mongery etc complete including applying two coats of synthitic enamel paint over one coat of red oxide primer

conforming to relevant IS

not less than 0.9mm dia confirming to IS 270 1978

Confirming to IS 2508 1984 of width 5.5 Mtr 300 GSM

Galvanisation as per IS 429 weight 0.459 kg Sq ft with J hooks with bitumen cup washer including nuts 8mm dia 150mm long complete.

Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383 1970 Second revision and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out the supply qty

conforming torelevant IS of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs plus 2.5 Kgs in dry conditions The finished mtrl shall be free from visible external defect such as holes oil patches ragged or untrue edges brakes cracks tears protuberances and indentations

Make PidiliteDr fixit Cico Fosroc

sample to be approved before supply Make Asian Berge Shalimar

Chalk white

conforming to IS 694 1990

with copper conductor

conforming to IS 371 1979

PVC casing caping square box 4 inch x 4inch

conforming to IS 723 1972.

conforming to IS 8828 1996 IEC 60898 2002 suitable for lighting and other domestic loads

conforming to IS 4064 Part I and II 1977

Modular socket 6A 2 3 pin combined 2 module

White cover plate with frame 3 module

Metal flush box 3 Module

PVC ceiling rose 2 3 Terminal

PVC Rawal Plug

The vertical Head and Leg side in duble portion of size 1950x950mm shall be made of 32 mm MB GI med grade pipe. The 02 Nos rectangular sleeping portion of bunk where cushion placed shall be made of MS Angle 40x40x5mm of size 1970 x 950mm as mentioned in attached drawing A detachable ladder made up with 20 mm MS pipe with four steps to be provided at leg side in each bunk. Female Male MS rectangular box of size 50 mm x 25 mm x 75 mm long to be welded two side protector bars of 15 mm dia MS pipe on top bunk to be welded as per details shown in drawing. The outer size of the bunk will be 1970 mm x 950 mm horizontally and 1950 mm x 950 mm vertically. The Bunk should have provision to place a removable type matress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. All MS pipes shall be medium grade ISI mark and provided with two coats of superior quality Black Spray paint over a coat of red oxide primer.Two Nos single piece cushion made of 100 mm thick PUF foam of density 40 Kg cum as applicable for sleeping cushions of standard of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply Wood BWR The PUF foam pasted on the ply wood shall be enclosed vinyl coated laminated upholstery cloth Rexene Makes PUF Sleepwell Kurlon Ply Wood Kitply National Greenply

Make Modiguard Saint Gobain Atul Glass

Brick Trowel Steel 305 mm with handle

Aluminimum straight edge 50mm squre 2mm thick 1800mm long

Galvanised Iron Pan Mortar Tasla 16 Gauge 16 inch dia minimum weight of 1.5 Kg

Plumb Bob Iron best quality with all accessories.

overall length minimum 595 mm with hard wooden handle

Phowrah with hard wooden handles with min weight 2.00 Kgs

for scrubbing cleaning brick work etc Colour Olive Green Black Make SAFEYURA ESAB Jupiter Seamless

Water Leveling pipe PVC 50 mtr

Measuring Tape 15 Mtr

as per IS specification 1239 part I 1990 ISI marked length 2 mtr.

MS earth pit cover of size 30 cm x 30 cm with handle

Iron spikes 16 Inch long complete as directed and specified by buyer

GI nipple 20mm dia and 10cm long IS 1879

fixed to copper ball of dia 50mm and 4mm thick with complete securing arrangement ISI Marked and bottom cover plate 100mm x 100mm x 4mm with 12mm dia hole 4 Nos along with 4 Nos of copper bolts fo size 10mm x 50mm long with nut and washers

GI wire 12 gauge conforming to IS 2062 1991

PVC Pipe 3m long 6 inch dia

check along with manual one per five LC

conforming to IS 383 1970 Specifications for coarse and fine aggregates Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete

GI Pipe 40 mm bore 2M long as per IS 1239

Crystaline Condcutive Mixture CCM

ABC MAP 90 along with its accessories confirming

PCC 1 4 8 and wall foundation floor PCC and steps PCC shall be mixed with HPI in ratio of 2 ltr per 50KG bag HPI is a chloride free organic admixture and supplied as a colourless clear to slightly cloudy viscous liquid The Chemical to be mixed during mixing of concrete for PCC in concrete mixture only