Almirah Large with shelves steel,Almirah med with shelves steel,Bed Hard 6feetx3feet with hard ply
Indian Army
Posted:
28 October 2024
Closed:
18 November 2024
GEM
GEM
Procurement Opportunity: Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top in SOUTH ANDAMAN, ANDAMAN & NICOBAR
Bid Publish Date
16-Dec-2024, 12:16 pm
Bid End Date
10-Jan-2025, 1:00 pm
EMD
₹85,000
Location
Progress
Issue16-Dec-2024, 12:16 pm
Technical01-Sep-2025, 6:13 pm
Financial
AwardPending
Quantity
328
Category
Almirah Large with shelves steel
Bid Type
Two Packet Bid
Categories
93
STEEL SHEET FABRIC PARTICLE BOARD PLASTIC STOOL DOORS FITMENT STORAGE CHESTS AND CABINETS AND TRUNKS BILLIARD BALLS ARMS MILD STEEL PIPE BOOK CASE WOODEN FURNITURE BARITONE HORNS MOLECULAR BIOLOGY REAGENTS RAIN COAT BUILDING CONSTRUCTION EXECUTIVE CHAIR PLY WOOD PAINTING FORESTRY PRODUCTS ALMIRAH STRUCTURE FABRICATION SOFA SET TERRACE MS PIPE RAILS TUBE LABORATORY CHEMICAL TUBE AND FITTING CHAIRS BOX WATER SUPPLY MATERIAL STEEL ALMIRAH NON FERROUS PIPE PRESS WHEAT FLOUR LAWN SOFA STEEL FURNITURE CHANNEL POLYPROPYLENE ERECTION OF STRUCTURAL CANVASES AND FILMS AND BOARDS COMPRESSED BOARD HARDWARE AND FASTENERS CALENDAR PLYWOOD BAILEY BRIDGE WOODEN BOARD DISTEMPER STRIP WOODEN PRODUCT PAINTS AND PRIMERS FIBERS THREADS AND YARNS STEEL TUBE WALNUT HANDGUN CABINET MESH ALCOHOLIC BEVERAGES TRANSITION METALS WOOD SUPPLY MELAMINE STOOL LABORATORY MATERIAL CENTRE TABLE CUSTOMIZED DECALS FABRICATOR BLANK FLASH CARDS MACHINE DIAMONDS PLASTIC GAUGE MS PIPE LINE PRIMERS LINKERS AND ADAPTORS BED STOMACHERS SCREWS INSULATING COMPONENT FURNITURE ITEMS ARM CHAIR STEEL TABLE UPVC PIPE PAINTS TABLES BUFFERS METAL PRODUCTS PAPER AND PRINTING SERVICES VENETIAN BLIND CLEAT MANUFACTURING SERVICES SQUARE PIPE WOODEN PLANK
Indian Army invites bids for Almirah Large with shelves steel, Almirah Med with shelves Steel, Bed Hard 6 feetx3 feet with ply top, Charpoy IP with hard top, Chair Computer, Chair Cushioned with arms, Chair Dinning, Chair Writing, Chair Easy FD, Chair Revolving Executive, Chair verandah, Ladder Alumium, Peg Table, Table 3 feetx2 feet with drawer, Table 3 feetx2 feet without drawer, Table bed side, Table dining 4 Person, Table dining 6 Person, Table dressing gents with mirror, Table dressing ladies with mirror, Table office clk steel, Table excutive with side table for officer, Table writing Med, Teapoy wooden, Sofa Set 5 seater in SOUTH ANDAMAN, ANDAMAN & NICOBAR. Quantity: 328. Submission Deadline: 10-01-2025 13: 00: 00. Submit your proposal before the deadline.
Documents 5
GeM-Bidding-7208374.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Bed hard steel MAP,Chair Easy Cushioned,Table Dressing Ladies,Shoe Rack Steel,Almirah large steel w
Indian Army
ERNAKULAM, KERALA
Posted:
28 January 2025
Closed:
18 February 2025
GEM
Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
Indian Army
SOUTH ANDAMAN, ANDAMAN & NICOBAR
Posted:
24 June 2025
Closed:
15 July 2025
GEM
Indian Army Almirah & Furniture Procurement Tender Thane Maharashtra 2025 ISO 9001 BIS
Indian Army
THANE, MAHARASHTRA
Posted:
10 November 2025
Closed:
20 November 2025
GEM
SOFA SET 5 SEATER,TABLE PEG,Almirah Medium Steel with Shelves,Chair computer,Almirah Large Steel wi
Indian Army
GWALIOR, MADHYA PRADESH
Posted:
13 February 2025
Closed:
6 March 2025
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
25 Items
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Almirah Large with shelves steel | Almirah Large with shelves steel DIMENSION. Overall size shall be 1985mm high,920mm wide and 485mm deep. DESCRIPTION.The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments.Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. HANDLE One chromium plated steel handle with a locking device shall be provided as shown on drawing . LOCKING DEVICE The locking device shall be three way locking device and shall also be provided with decorative key plate . Make of Lock-Harrison or Godrej. FINISH -All steel surfaces shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine over a coat of red oxide (primer)after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg. | 7 | nos | ageqscmbay@1 | 90 |
| 2 | Almirah Med with shelves Steel | Almirah Med with shelves Steel DIMENSION Overall size shall be 1270mm high,765mm wide and 440mm deep. DESCRIPTION The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship. HANDLE A steel chromium plated handle 100mm long shall be provided to the shutter. LOCKING DEVICE The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej. FINISH All steel surfaces exposed to view when placed in position shall be painted with two coats of silver hammer paint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visible colour as directed by Engr-In -Charge. Rest all as per drgs. | 5 | nos | ageqscmbay@1 | 90 |
| 3 | Bed Hard 6 feetx3 feet with ply top | Bed Hard 6feetx3feet with ply top Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board exterior grade of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board. 25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.All metal /iron work shall be painted with synthetic enamel black after doing two coats of metal primer.Rest all as per drg. | 9 | nos | ageqscmbay@1 | 90 |
| 4 | Charpoy IP with hard top | Charpoy IP with hard top Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick BWR plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg..PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color after applying a coat of primer. Rest all as per drg | 9 | nos | ageqscmbay@1 | 90 |
| 5 | Chair Computer | Chair Computer The Base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high .The pedestal assembly shall be provided with injection molded in black 30% glass filled nylon. A 10.5mm dia forged bright Zinc plated MS Castor Pin is of press fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround.The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert .It shall be scratch and weather resistant. Rest all as per drg.and as approved by GE Make Godrej/ Alder /Featherlite | 4 | nos | ageqscmbay@1 | 90 |
| 6 | Chair Cushioned with arms | Chair Cushioned with arms Medium back rest. Chrome armrest and base tilt mechanism any time locking As per Trade patern of sample and directed by Enginer-in-Charge/ GE. Make Godrej, fetherlite, Alder or equilent. | 4 | nos | ageqscmbay@1 | 90 |
| 7 | Chair Dinning | Chair Dinning Chair Dining with Seat cushioned shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant drg All wood work shall be of kiln seasoned and chemically pressure treated Ist class hard wood (Teakwood). Seat Seat shall be 75mm thick of polyurethane foam density of 32 Kg/Cu.m covered with fabric of acrylic/polyester/polypropylene and upholstered with good quality leatherised of make Sleep well/Kurl on/Coir foam as approved by GE. Plywood for seat shall be 12mm thick BWR type Toes Nylon buffers shall be high glossy of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. Finishes All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished with lacquer finish after prepration of imface All other items / fittings shall be as shown on drawing and provided as per relevant. | 36 | nos | ageqscmbay@1 | 90 |
| 8 | Chair Writing | Chair Writing DIMENSION Overall size shall be 535mm long, 470mm wide and 890mm high. DESCRIPTION Well seasoned teak wood throughout in frame work shall be used for frame work , canning shall be done without any joint in the cane. The cane shall be of 2mm wide 0.4mm thick half roud gola type of shah/equivalent brand. The sides of the chair shall be canned with 4mm thick cane. Hard rubber rings of 25 mm dia and 25mm hight shall be screwed to the bottom of all legs. Funish All wooden surface shall be melamine polish with lacquer finish of walnut shade as approved by engr In charge Rest all as per drg. | 23 | nos | ageqscmbay@1 | 90 |
| 9 | Chair Easy FD | Chair Easy FD DIMENSION. Overall size shall be 510 mm long, 575mm wide and 720mm high . DESCRIPTION. All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs. All wood surfaces exposed shall be given high gloss French polish with lacquer finish. | 13 | nos | ageqscmbay@1 | 90 |
| 10 | Chair Revolving Executive | Chair Revolving Executive Glass filled nylon backrest with limber support & mesh fabric. 4D adjustable armrest with gel PU pad. Self weight syncro till multi position lock and seatslider. 700mm aluminium diecast base & 60mm nylone castors with class 4 Gas lift.Finrest compisite leather on seat & back. Knee tilt mechnism with multiposition lock. As per Trade patern sampleand directed by Enginer-in-Charge. Make Godrej, fetherlite, Alder or equilent. | 9 | nos | ageqscmbay@1 | 90 |
| 11 | Chair verandah | Chair verandah The overall size of the chair shall be 455mm wide 455mm deep and 940mm high. The frame of the chair shall be of 19mm dia MS tube of wall thickness 1.6mm duly powder coated. The seat and back of the chair shall be of PVC 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on seat and back. One stiffener 19mm dia MS tube shall be provided in between the front legs as shown in drg. An additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of PVC seat irrespective of what is shown on drg. Rubber shoes of best quality shall be provided to each end of legs.Rest all as per drg. | 27 | nos | ageqscmbay@1 | 90 |
| 12 | Ladder Alumium | Ladder Alumium Overall size shall be of 2310mm long and 363.5mm wide. The ladder shall be of Aluminium having wall thickness 3.18mm .Each rung shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm and shall be eight in nos at equidistant space of 300mm in between as shown in drg.The stringer of ladder shall be 31.75mm wide and 3.18mm thick .Each alumnium pipe rung of 23 mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap. Hard rubber caps/shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drawing with screws. Rest all as shown on drawing. | 2 | nos | ageqscmbay@1 | 90 |
| 13 | Peg Table | Peg Table DIMENSION. Overall size shall be 450mm long,300mm wide and 380mm high. DESCRIPTION. Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table. FINISH All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish,after preparation of surfaces.Rest all as per drg. | 32 | nos | ageqscmbay@1 | 90 |
| 14 | Table 3 feetx2 feet with drawer | Table 3feetx2feet with drawer All as shown on drawing. Overall size shall be 900mm long, 600mm wide and 760mm high. All wood shall be of first class hard wood teak (MP). Legs shall be 60mm x 30mm in section throughout and 741 mm high, four in numbers, Joined together in front, back and sides with top rails of 20mm x 110mm in section provided flush with top of legs. The left hand side portion, viewing from front shall have drawers of 300rnrn wide. 25mm x 40mm in section teak wood stiffener on one side and 20mm x 30mm in sectlon teak wood fillet on other side of drawer shall be provided as shown on drawing. Track rails 25mm x 25mm In section on one side telescopic channel of make mettick/Ebbco,shall be used for smaooth mvement of drawer and 30mm x 25mm in section on other side of drawers having rebate for guide rails as 12mm x 12mm in section shall be provided all as shown on drawing. The sides and back of drawer shall be of 12mm thick and 110 mm high teak wood planks. The front of drawer shall be of 20mm x 110mm in section teak wood plan. The bottom of drawer shall be of 6mm thick commercial plywood. Two bottom rails, one on each short side, shall be provided of 20mm x 60mm in section teak wood joining legs in short sides. The top shall be of 18mrn thick particle board exerior grade over which 1.5mm thick plastic laminated sheet shall be fixed, 4mm thick teak wood edging shall be- provided al-round-the top of table. The top of table shall be flush with legs and there shall be no projection on any sides. All wood surfaces with high gloss finish. | 13 | nos | ageqscmbay@1 | 90 |
| 15 | Table 3 feetx2 feet without drawer | Table 3feetx2feet without drawer All as shown on drawing. Overall size shall be 900mm long, 600mm wide and 760mm high. All wood shall be of first class hard wood leak (MP). Legs shall be of 60mm x 30mm in section throughout and 741 mm high, four in numbers joined together in front, back and sides with top rails 20mm x 60mm In section provided flush with top of legs. At bottom, 100mm high from bottom, side wooden lower rails of 20mm x 60mm in section shall be provided in short sides Joining legs in short sides. 5mm x 5mm in section groove shall be provided in legs at top of legs in portion visible 10 view when placed in position. table top shall be of 18 mm thick particle board exterior grade over which 1.5mm thick plastic laminated sheet shall be fixed with fevicol irrespective of what is shown on drawing. 4mm thick teak wood edging shall be provided all-round the edges of top of table. The top of table shall be flush with legs and there shall be on projection on any sides. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Hard rubber/PVC shoes of 25mm dia and 25mm high shall be screwed to bottom of all legs. | 15 | nos | ageqscmbay@1 | 90 |
| 16 | Table bed side | Table bed side The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg.The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. The two sides and top shall be made up of 18mm thick prelamainted particle board exterior grade. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood BWR grade duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood irrespective of what is shown on drg, except the front side which shall be of 18mm thick prelaminated particle board exterior grade. The drawers shall be made functional by using telescopic channel of appropriate size make mettick/Ebbco,shall be used for smaooth mvement of drawer.The drawers of the tables shall be provided with 100mm long CP handles .Rest all as per drg. | 37 | nos | ageqscmbay@1 | 90 |
| 17 | Table dining 4 Person | Table dining 4 Person All as per drg, the wood shall be 1st class hard wood teak free from any joints cracks and knots. The top shall be made out of 18mm thick pre laminated particle board exterior grade one side teak lamination in wange / teak (as approved) colour and one side white lamination. all exposed edges of PPB shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour The frame shall be polished after prepration of surfaces with two or more coats of brown / teak colour polish as per the requirement to its glossy look. | 6 | nos | ageqscmbay@1 | 90 |
| 18 | Table dining 6 Person | Table dining 6 Person All as per drg, the wood shall be 1st class hard wood teak free from any joints cracks and knots. The top shall be made out of 18mm thick pre laminated particle board one side teak lamination in wange / teak (as approved) colour and one side white lamination. all exposed edges of PPB shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour The frame shall be polished after prepration of surfaces with two or more coats of brown / teak colour polish as per the requirement to its glossy look. | 6 | nos | ageqscmbay@1 | 90 |
| 19 | Table dressing gents with mirror | Table dressing gents with mirror All as per Drg, the frame shall be strictly as per drg teak colour as approved. The mirror shall be of 5mm thickness of make modiquard/seint eobeia nut all shown on drg and as directed by Engr-in-charge. | 19 | nos | ageqscmbay@1 | 90 |
| 20 | Table dressing ladies with mirror | Table dressing ladies with mirror The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. The sides, top ,back and front of the base unit shall be of 18mm thick prelaminated MDF board. The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back of drawers shall be of 12mm thick prelaminated MDF ,bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board.5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF .The top of the stool shall be of 12mm thick plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.Rest all as per drg. | 13 | nos | ageqscmbay@1 | 90 |
| 21 | Table office clk steel | Table office clk steel DIMENSION Overall size shall be 1200mm long, 610mm wide and 760mm high. DESCRIPTION Steel frame shall be of size 1160x570x742mm .four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners of same size shall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep..The top of table shall be provided with pre-laminated MDF board of 18/19mm thick with teak veener shade and 4mm thick teak wood edging alround the table .Hard rubber/PVC toes shall be provided to the legs.Locking device shall be provided to drawers. FINISH All steel surfaces exposed over a coat of red oxide shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg. | 16 | nos | ageqscmbay@1 | 90 |
| 22 | Table excutive with side table for officer | Table excutive with side table for officer Top 41mm thick mlamine edge band with leather pad. Legs- 18 mm thick melamine edge band. Table Size 2100x1050x750mm.with storage unit. storage unit size 1200x450x670mm. As per Trade patern as per sample and directed by Engineer-in-Charge. Make Godrej/ Alder /Featherlite | 2 | nos | ageqscmbay@1 | 90 |
| 23 | Table writing Med | Table writing Med DIMENSION Overall size shall be 1145mm long, 600mm wide and 760mm high. DESCRIPTION All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. The top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. Two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawer and cabinet shall be 18mm thick BWR grade plywood Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6 mm thick plywood commercial.6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter.25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. FINISH All wood surfaces shall be French polished with high gloss finish. Rest all as per drg. | 7 | nos | ageqscmbay@1 | 90 |
| 24 | Teapoy wooden | Teapoy wooden DIMENSION The overall size shall be 600mm long, 450mm wide and 540mm high. DESCRIPTION The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws.Top of table shall be of 18 mm thick pre-laminated MDF board with 4mm teak wood edging al-round the top of table. FINISH All wood surfaces shall be French polished with high gloss finish. Rest all as per drg | 13 | nos | ageqscmbay@1 | 90 |
| 25 | Sofa Set 5 seater | Sofa Set 5 seater all as per drg, the timber in all around shall be first class hard wood teak,The cushions shall be of min 40 D quality of make and covered with tapestery cloth of approved quality pattern and colour before incorporating in work The frame shall be polished after prepration of surfaces with two or more coats of brown / teak colour polish as per the requirement to its glossy look not all as shown on drg and as directed by Engr-in-charge. | 1 | nos | ageqscmbay@1 | 90 |
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
Additional Doc 1 (Requested in ATC)
6
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
7
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | DHAKSHNA MOORTHY & SONS Under PMA | - | 09-01-2025 18:13:16 | Disqualified |
| 2 | DINAT ENTERPRISES Under PMA | - | 10-01-2025 12:19:25 | Disqualified |
| 3 | KITCHENTECH INTERIORS PRIVATE LIMITED Under PMA | - | 06-01-2025 15:26:26 | Disqualified |
| 4 | M/S A. A. ENTERPRISES Under PMA | - | 18-12-2024 16:13:14 | Disqualified |
| 5 | M/s Srinathji Industries Port Blair Under PMA | - | 09-01-2025 15:49:53 | Qualified |
| 6 | Mansarover Industrial Corporation Under PMA | - | 09-01-2025 16:33:37 | Qualified |
| 7 | MEHALI TRADERS Under PMA | - | 03-01-2025 21:45:48 | Disqualified |
| 8 | RSR ENTERPRICES Under PMA | - | 09-01-2025 19:21:47 | Disqualified |
| 9 | SALCON ENGINEERS AND FABRICATORS Under PMA | - | 10-01-2025 12:18:46 | Qualified |
| 10 | SAYARA ACCESSORIES Under PMA | - | 09-01-2025 18:22:34 | Qualified |
| 11 | SBDEE FURNITURE SOLUTION Under PMA | - | 10-01-2025 12:09:22 | Disqualified |
| 12 | SKY GROUP Under PMA | - | 09-01-2025 18:34:19 | Qualified |
| 13 | SREE HARI FABRICATOR Under PMA | - | 09-01-2025 12:09:44 | Disqualified |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | SAYARA ACCESSORIES(MSE,MII)( MSE Social Category:OBC ) Under PMA | ₹28,19,499 | Item Categories : Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top |
| L2 | Mansarover Industrial Corporation (MSE,MII)( MSE Social Category:General ) Under PMA | ₹29,07,917 | Item Categories : Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top |
| L3 | M/s Srinathji Industries Port Blair (MSE,MII)( MSE Social Category:General ) Under PMA | ₹30,95,733 | Item Categories : Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top |
| L4 | SALCON ENGINEERS AND FABRICATORS (MSE,MII)( MSE Social Category:General ) Under PMA | ₹31,88,219 | Item Categories : Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top |
| L5 | SKY GROUP (MSE,MII)( MSE Social Category:General ) Under PMA | ₹33,60,790 | Item Categories : Almirah Large with shelves steel,Almirah Med with shelves Steel,Bed Hard 6 feetx3 feet with ply top |
Frequently Asked Questions
Key insights about ANDAMAN & NICOBAR tender market
FAQs
What are the eligibility criteria for participating in the MB Furniture tender?
A1: To be eligible for the MB Furniture tender, bidders must have at least 3 years of past experience in supplying similar furniture and a minimum average annual turnover of 14 Lakh over the past three years. MSEs and Startups can avail exemptions from these requirements under certain conditions.
What documents are required for bid submission?
A2: Required documents include evidence of experience, past performance, certificates confirming bidder turnover, and any additional documentation specified in the ATC. If seeking exemption from experience or turnover criteria, relevant supporting documents must accompany the bid.
What is the Earnest Money Deposit (EMD) required for the tender?
A3: The EMD required for participating in the MB Furniture tender is ₹85,000. This amount must be submitted alongside the bid.
What will be the evaluation process for this tender?
A4: The evaluation will be based on a total value-wise assessment, focusing on the compliance of bids with the specified requirements and preferences for local procurement under the "Make in India" initiative.
How should bids be submitted?
A5: Bids can be submitted electronically through the GeM portal, where detailed instructions are provided in the notification.
When is the last date to submit bids for the MB Furniture tender?
A6: The last date to submit bids is January 10, 2025, at 13:00 hours. Late submissions will not be considered.
Are there any provisions for MSEs in this tender?
A7: Yes, MSEs are exempt from the experience and turnover criteria if they meet specified quality standards as per the guidelines.
What are the necessary compliance requirements for technical specifications?
A8: Compliance with the specified BoQ is necessary, and bidders should provide all supporting documentation validating their adherence to quality and technical standards.
What is the validity period for the bids?
A9: The bid offer validity is 90 days from the closure date of the tender.
Can bidders rectify their submissions post-deadline?
A10: Once the bid submission deadline has passed, modifications or rectifications to the bid are not permitted.
Is there a requirement for performance security?
A11: Yes, a performance security of 3% of the contract value is mandatory for successful bidders and should remain valid for 24 months following contract execution.
Where can interested bidders find the full tender document?
A12: The full tender document can be downloaded from the GeM portal using the following link: Download Main Document.
Is inspection of materials required before delivery?
A13: No inspection is required as per the guidelines provided in this tender documentation.
How will local suppliers be prioritized in the evaluation process?
A14: Suppliers qualifying as Class 1 local suppliers will be prioritized under the "Make in India" provision, enhancing their competitiveness during the bid evaluation.
What happens to bids that do not meet the technical criteria?
A15: Bids failing to meet the specified technical criteria will be disqualified from the evaluation process.
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 5
GeM-Bidding-7208374.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS