Tender Notice for "For Under Sluice Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. '' in BIHAR
Bid Publish Date
14-Mar-2021, 10:02 pm
Bid End Date
24-Mar-2021, 3:00 pm
EMD
₹2,92,700
Value
₹1,46,31,517
Location
Progress
Tender Type
Open
Tender Fee
₹10,000
Tender Fee Exemption
No
EMD Exemption
No
Category
MECHANICAL
Categories
52
The issuing authority invites bids for Design, Drawing, Fabrication, Supply, Erection, fitting, fixing, testing and commissioning of Under Sluice Gate - 04 Nos. (size 5300 mm x 1500 mm) and Right H/R Gate ? 02 Nos. ( size 2800 mm x 1200 mm) hoist bridge with platform and railing including their hoist system for Bataspur weir under Irrigation Mechanical Division, Gaya. (GROUP-01) in BIHAR. Submission Deadline: 24-03-2021 15: 00: 00. Submit your proposal before the deadline.
Additional Tender Data
Commercial Details
Processing Fee
₹3,540
Tender Currency
INR
Bid Currency
INR
Ranking Sequence
L1 Ranking
Estimated Value Visibility
Y
Bid To RA
No
Authority & Contact
Organization Hierarchy
Government of Bihar->Water Resources Department->C.E. ( MECH.) PATNA->IRRIGATION MECHANICAL CIRCLE, GAYA, CAMP-DEHRI
Approving Authority
ASHOK KUMAR YADAV (SE)
Tender Creator
Mr SATYENDRA SINGH (SUPERINTENDENT ENGINEER)
Pre-Bid & Qualification
Pre-Bid Meeting Start
18-03-2021 15:00:00
Pre-Bid Meeting End
18-03-2021 16:00:00
Pre-Bid Discussion Type
OFFLINE
Pre-Bid Venue
REFER NIT FOR THE SAME
Payment Breakdown
| Type | Amount | Currency | Mode | Exemption |
|---|---|---|---|---|
| EMD | ₹2,92,700 | INR | Internet Payment Gateway(IPG),Challan|Bank Guarantee | No |
| Tender Fee | ₹10,000 | INR | Internet Payment Gateway(IPG),Challan| | No |
| Tender Processing Fee | ₹3,540 | INR | Internet Payment Gateway(IPG),Challan| | No |
Document Requirements
Earnest Money
Registration No.
Key Equipment (Either owned or leased or by procurement)
Performance certificate of similar nature of work
Certificate of manufacturer/ authorized sole agent
Affidavit as Letter No. 686 dated 19.08.2014.
List of Technical Personal
PAN Card
GST Registration
NOC for Debar
Character Certificate
Additional document as per NIQ and Tender Document
General Particulars
Earnest Money
Registration No
Key Equipment (Either owned or leased or by procurement)
Performance certificate of similar nature of work
Certificate of manufacturer/ authorized sole agent
Affidavit as Letter No. 686 dated 19.08.2014.
List of Technical Personal
PAN Card
GST Registration
Character Certificate
NOC for Debar
Tender Terms
Section 1
DetailsAccepted all terms and condition as per NIQ and Tender document.
Section 1
DetailsAccepted all terms and condition as per NIQ and Tender document.
Accepted all terms and condition as per NIQ and Tender document.
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 7
RE NIQ 01 2020-21 IMD GAYA.pdf
GENERAL_DOCUMENT
Bataspur Diagram.pdf
GENERAL_DOCUMENT
letter_686.pdf
GENERAL_DOCUMENT
Technical bid.doc
GENERAL_DOCUMENT
TECHNICAL CHECKLIST.xls
GENERAL_DOCUMENT
BATASPUR BOQ DOC.xls
BOQ
CORRIGENDUM NIT NO. 01 LT. 146, 19-03-2021.pdf
NIT
Bill of Quantities (BOQ)
9 Items Sign in to view GEM price trends Sign in for GEM prices
"For Under Sluice Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. ''
"For Under Sluice Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. ''
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( size 5300 x 1500 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( size 5300 x 1500 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
"Design, drawing of structural Steel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.''
"Design, drawing of structural Steel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.''
"Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map."
"Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map."
For Right H/R Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
For Right H/R Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
"Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( size 2800 x 1200 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map."
"Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( size 2800 x 1200 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map."
Design, drawing of structural wheel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing of structural wheel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of adequate capacity for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of adequate capacity for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
GST @ 12% and Labour Cess 1%
GST @ 12% and Labour Cess 1%
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Mandatory | Price Trends |
|---|---|---|---|---|---|---|---|---|
| 1 | "For Under Sluice Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. '' | "For Under Sluice Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. '' | 4 | each | - | - | Yes | |
| 2 | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( size 5300 x 1500 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( size 5300 x 1500 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 4 | each | - | - | Yes | |
| 3 | "Design, drawing of structural Steel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.'' | "Design, drawing of structural Steel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.'' | 4 | each | - | - | Yes | |
| 4 | "Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map." | "Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map." | 4 | each | - | - | Yes | |
| 5 | For Right H/R Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | For Right H/R Gate-Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 2 | each | - | - | Yes | |
| 6 | "Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( size 2800 x 1200 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map." | "Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( size 2800 x 1200 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map." | 2 | each | - | - | Yes | |
| 7 | Design, drawing of structural wheel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing of structural wheel hoist bridge consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 2 | each | - | - | Yes | |
| 8 | Design, drawing, commissioning of adequate capacity for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, commissioning of adequate capacity for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 2 | each | - | - | Yes | |
| 9 | GST @ 12% and Labour Cess 1% | GST @ 12% and Labour Cess 1% | - | - | - | - | Yes |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 7
RE NIQ 01 2020-21 IMD GAYA.pdf
GENERAL_DOCUMENT
Bataspur Diagram.pdf
GENERAL_DOCUMENT
letter_686.pdf
GENERAL_DOCUMENT
Technical bid.doc
GENERAL_DOCUMENT
TECHNICAL CHECKLIST.xls
GENERAL_DOCUMENT
BATASPUR BOQ DOC.xls
BOQ
CORRIGENDUM NIT NO. 01 LT. 146, 19-03-2021.pdf
NIT