Airports Authority of India PAPI Reflector & Electricals Tender Madurai Tamil Nadu 2025
Airports Authority Of India
MADURAI, TAMIL NADU
Progress
Quantity
3336
Category
Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings
Bid Type
Two Packet Bid
Public procurement opportunity for Airports Authority Of India Supply of 200W, 6. 6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings, Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting, Supply of 105W, 6. 6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting, Supply of 200Watt, 20A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 200Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 15Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 15Watt, 20A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 100Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 300Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of Green Spreader Lens for AMA fitting, Supply of 180 deg. Red inner lens, Right for AMA fitting, Supply of 180 deg. Red inner lens, left for AMA fitting, Supply of 180 deg. Yellow inner lens, Right for AMA fitting, Supply of 180 deg. Yellow inner lens, left for AMA fitting, Supply of outer side O Ring suitable for existing OCEM make, Supply of outer side O Ring suitable for existing OCEM make Middle, Supply of inner side O Ring for existing OCEM make runway edge Fitting, Supply of Air field LED signage Converter with dual input and inbuilt change over, suitable for existing signages, Supply of lens cover for LED light fitting for existing AMA make, Supply of Aluminium Reflector suitable for existing AMA make, Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make, Supply of Bi-Directional Elevated High Intensity Halogen Type Runway Edge Light Fitting complete with prefocus lamp holder, Supply of Uni- Directional Elevated High Intensity Halogen Type Runway Edge Light Fitting complete with prefocus lamp holder, Supply of L-Bracket suitable for existing AMA make, Supply of Upper Breakable Coupling, Supply of 2 pin 2 x 2. 5 sqmm Secondary Plug Assembly Lead 0. 3 Meter for LED, Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly Lead 0. 3 Meter, Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly Lead 2 Meter, Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV, Supply of 1000Watt, 240V, GX15d, PAR 64, bi-pin halogen photo optic beacon lamp, Supply of 4C X 4 Sq. mm. copper flexible cable, Supply of 1 X 6 sq. mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable, Supply of 1 X 16 sq. mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable in SURAT, GUJARAT. Quantity: 3336 issued by. Submission Deadline: 01-08-2025 14: 00: 00. View full details and respond.
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Airports Authority Of India
MADURAI, TAMIL NADU
Airports Authority Of India
COIMBATORE, TAMIL NADU
Ans,finance,hr,engineering,tech,ops,commercial,general Store,it
BHOPAL, MADHYA PRADESH
Airports Authority Of India
Airports Authority Of India
VADODARA, GUJARAT
Tender Results
Loading results...
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings | Supply of 200W/6.6A HIRL bi - pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. (Make-OSRAM -64386 or equivalent). | 950 | each | agm1.electrical.vasu | 365 |
| 2 | Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting | Supply of Bi Pin Lamp Holder for AMA make elevated type Runway/PAPI/Approach/Taxi Light Fitting as per ICAO/CAR compliance and AAI specification etc complete as required. | 450 | each | agm1.electrical.vasu | 365 |
| 3 | Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting | Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required. (Make OSRAM Cat no.643339C or equivalent). | 300 | each | agm1.electrical.vasu | 365 |
| 4 | Supply of 200Watt, 20A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 200Watt, 20A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 40 | each | agm1.electrical.vasu | 365 |
| 5 | Supply of 200Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 200Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 15 | each | agm1.electrical.vasu | 365 |
| 6 | Supply of 15Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 15 watt ,6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 25 | each | agm1.electrical.vasu | 365 |
| 7 | Supply of 15Watt, 20A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 15 watt ,20A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 |
| 8 | Supply of 100Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 100 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 9 | Supply of 300Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 300 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 6 | each | agm1.electrical.vasu | 365 |
| 10 | Supply of Green Spreader Lens for AMA fitting | Supply of Green Spreader Lens (suitable for AMA make elevated type Threshold fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 30 | each | agm1.electrical.vasu | 365 |
| 11 | Supply of 180 deg. Red inner lens,Right for AMA fitting | Supply of 180 deg. Red inner lens Right ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 12 | Supply of 180 deg. Red inner lens,left for AMA fitting | Supply of 180 deg. Red inner lens,Left ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 35 | each | agm1.electrical.vasu | 365 |
| 13 | Supply of 180 deg. Yellow inner lens,Right for AMA fitting | Supply of 180 deg. Yellow inner lens,Right ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 14 | Supply of 180 deg. Yellow inner lens,left for AMA fitting | Supply of 180 deg. Yellow inner lens,Left ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 15 | Supply of outer side O Ring suitable for existing OCEM make | Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),L-868 base as per ICAO/CAR compliance and AAI specification etc complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 16 | Supply of outer side O Ring suitable for existing OCEM make Middle | Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),( between fixture and base base ) as per ICAO/CAR compliance and AAI specification etc complete as required. | 30 | each | agm1.electrical.vasu | 365 |
| 17 | Supply of inner side O Ring for existing OCEM make runway edge Fitting | Supply of inner side O Ring for existing OCEM make runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) ,(O-Ring around the dome ) as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 18 | Supply of Air field LED signage Converter with dual input and inbuilt change over, suitable for existing signages | Supply of Air field LED signage Converter with dual input and inbuilt change over, suitable for existing signages installed at site etc as per ICAO/CAR compliance and AAI specification etc complete as required.Input 2.8 A - 6.6 A series circuit Output - 35 V DC , 72 watt | 20 | each | agm1.electrical.vasu | 365 |
| 19 | Supply of lens cover for LED light fitting for existing AMA make | Supply of lens cover for LED light fitting for existing AMA make for landing-H as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 20 | Supply of Aluminium Reflector suitable for existing AMA make | Supply of Aluminium Reflector suitable for existing AMA make elevated type Threshold/Approach /End light fitting as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 21 | Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make | Supply of Clear /yellow /Green/Red filter suitable for existing OCEM make inset type Runway edge/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 22 | Supply of Bi-Directional Elevated High Intensity Halogen Type Runway Edge Light Fitting complete with prefocus lamp holder | Supply of Bi-Directional Elevated High Intensity Halogen Type Runway Edge Light Fitting complete with prefocus lamp holder, 200 watt 6.6 A halogen lamp ,clear outer prismatic dome, clear inner prismatic lens, lens holding mechanisam, ball joint for easy leveling, breakable coupling, central column mounting assembly, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, spring and plain washers, SS Bolts and other accessories etc. and confirming to particular specification etc. complete as required to meet latest ICAO requirement but excluding base plate. | 5 | each | agm1.electrical.vasu | 365 |
| 23 | Supply of Uni-Directional Elevated High Intensity Halogen Type Runway Edge Light Fitting complete with prefocus lamp holder | Supply of Uni-Directional Elevated High Intensity Halogen Type Runway Approach / Threshold / End Light Fitting complete with prefocus lamp holder, 200 watt 6.6 A halogen lamp ,clear outer prismatic dome, clear inner prismatic lens, lens holding mechanisam, ball joint for easy leveling, breakable coupling, central column mounting assembly, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, spring & plain washers, SS Bolts & other accessories etc. and confirming to particular specification etc. complete as required to meet latest ICAO requirement but excluding base plate. | 5 | each | agm1.electrical.vasu | 365 |
| 24 | Supply of L-Bracket suitable for existing AMA make | Supply of L-Bracket suitable for existing AMA make elevated type Threshold/Approach/End Light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 |
| 25 | Supply of Upper Breakable Coupling | Supply of Upper Breakable Coupling (including leg plate and point) Spares for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 26 | Supply of 2 pin 2 x 2.5 sqmm Secondary Plug Assembly Lead 0.3 Meter for LED | Supply of 2 pin 2 x 2.5 sqmm Secondary Plug Assembly(Lead) suitable for the connection in LED Taxiway Edge light lead of 0.3 meter length made out of multi stranded copper conductor EPR insulated & PCP sheathed, anti termite & rodent treated 1.1 KV grade underground cable etc. complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 27 | Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly Lead 0.3 Meter | Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly(Lead) suitable for the connection in Runway light lead of 0.3 meter length made out of multi stranded copper conductor EPR insulated & PCP sheathed, anti termite & rodent treated 1.1 KV grade underground cable etc. complete as required. | 20 | each | agm1.electrical.vasu | 365 |
| 28 | Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly Lead 2 Meter | Supply of 2 pin 2 x 4 sqmm Secondary Plug Assembly(Lead) suitable for the connection in Runway light lead of 2 meter length made out of multi stranded copper conductor EPR insulated & PCP sheathed, anti termite & rodent treated 1.1 KV grade underground cable etc. complete as required. | 10 | each | agm1.electrical.vasu | 365 |
| 29 | Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV | Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV Air Field Lighting (AFL) copper conductor cable as required. (A set shall consist of one male and one female connector). | 15 | each | agm1.electrical.vasu | 365 |
| 30 | Supply of 1000Watt, 240V, GX15d, PAR 64, bi-pin halogen photo optic beacon lamp | Supply of 1000Watt, 240V, GX15d, PAR 64, bi-pin halogen photo optic lamp for existing beacon fitting as per AAI specification etc complete as required.Make OSRAM or equivalent. | 10 | each | agm1.electrical.vasu | 365 |
| 31 | Supply of 4C X 4 Sq. mm. copper flexible cable | Supply of 4C X 4 Sq. mm. (Coil shall be 90/100 Mtrs ) size multicore round PVC Insulated and FR PVC round sheathed copper conductor flexible industrial cable of 1100 volts grade conforming to IS 694 as amended uptodate etc. complete as required. | 200 | mtr | agm1.electrical.vasu | 365 |
| 32 | Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable | Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed (Inner sheath extruded) galvanised steel strip armoured anti termite and anti rodent treated under ground cable of 5 KV grade confirming to IS 1554 as amended upto date and as specified in particular specification. | 500 | mtr | agm1.electrical.vasu | 365 |
| 33 | Supply of 1 X 16 sq.mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable | Supply of 1 X 16 sq.mm Copper conductor PVC insulated, PVC sheathed (Inner sheath extruded) galvanised steel strip armoured anti termite and anti rodent treated under ground cable of 5 KV grade confirming to IS 1554 as amended upto date and as specified in particular specification. | 500 | mtr | agm1.electrical.vasu | 365 |
Experience Criteria
Bidder Turnover
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | AMA PRIVATE LIMITED Under PMA | - | 29-07-2025 10:50:47 | Qualified |
| 2 | CREATIVE TRADING CO Under PMA | - | 31-07-2025 13:24:24 | Qualified |
| 3 | M/S ELECTROMACH SALES AGENCIES Under PMA | - | 01-08-2025 13:24:39 | Qualified |
| 4 | SHRI K.D.INDUSTRIES Under PMA | - | 01-08-2025 00:47:25 | Qualified |
| 5 | TECHNO ELECTRICALS Under PMA | - | 01-08-2025 10:15:47 | Qualified |
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | TECHNO ELECTRICALS(MII) Under PMA | ₹30,05,410 | Item Categories : Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run |
| L2 | M/S ELECTROMACH SALES AGENCIES (MSE,MII)( MSE Social Category:General ) Under PMA | ₹31,89,540 | Item Categories : Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run |
| L3 | AMA PRIVATE LIMITED (MSE,MII)( MSE Social Category:General ) Under PMA | ₹32,27,181 | Item Categories : Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run |
| L4 | SHRI K.D.INDUSTRIES (MSE,MII)( MSE Social Category:General ) Under PMA | ₹32,64,000 | Item Categories : Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run |
| L5 | CREATIVE TRADING CO (MSE,MII)( MSE Social Category:General ) Under PMA | ₹33,27,600 | Item Categories : Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run |
Please sign in or create an account to view contract details and download result documents.
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS