Contract Bidding Open For HRC Fuse cylindrical type-4A,HRC Fuse cylindrical type-6A,HRC Fuse cylindrical type-10A,HRC Fuse BS in VADODARA, GUJARAT
Progress
Quantity
3906
Category
Digital low current clamp meter
Bid Type
Single Packet Bid
Categories
50
Dedicated Freight Corridor Corporation Of India Limited invites bids for HRC Fuse cylindrical type-4A, HRC Fuse cylindrical type-6A, HRC Fuse cylindrical type-10A, HRC Fuse BS88 gG, offset blade type, Glass Fuses 315mA, Glass Fuses 630mA, Glass Fuses 2A, Glass Fuses 4A, Glass Fuses 6A, Glass Fuses 10A, Glass Fuses 16A, RJ45 connector, RJ45 connector Shielded, CAT6 Cable, Digital low current clamp meter, PUF Sealant 200ml, LAN Tester, Lug Crimping Tool, Tagari or Ghamela GI, Oil Pump, Chamois leather for cleaning purpose, Krone Tool, Silicon Sealant 200ml, Glass Putty of IS 419-1967, WD 40 Spray Can, RJ45 Crimping tool, Soldering iron Soldron make Electric wattage 25 watt, Silicon sealant applicator Gun, Door mat 2 feet x 3 feet, Digital vernier Callipers, Supply of ARA Terminal blocks, M22 x 275MM, Bolt, Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut, M8, 2 Nut, M30, 1 Nut, 1 Check Nut and 1 Washer, M12 x 100MM, Bolt, 4 Washer, Nut 3 SET, CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET, M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer, M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer, M22, Check Nut, M24, 1 Nut, 1 Check Nut, 5 by 8 x 2 inch BOLT HEX, 3 by 8 x 2 inch BOLT HEX, 3 by 8 x 1. 5 inch BOLT HEX, 3 by 8 x 1 inch BOLT HEX, 3 by 8 x 0. 75 inch BOLT HEX, Square Head 3 by 4 x 4. 0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin, Square Head 3 by 4 x 5. 5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Square Head 3 by 4 x 3. 5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin, M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer in VADODARA, GUJARAT. Quantity: 3906. Submission Deadline: 03-03-2025 15: 00: 00. Submit your proposal before the deadline.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
HRC Fuse cylindrical type-4A , HRC Fuse cylindrical type-6A , HRC Fuse cylindrical type-10A , HRC Fuse BS88 gG, offset blade type , Glass Fuses 315mA , Glass Fuses 630mA , Glass Fuses 2A , Glass Fuses 4A , Glass Fuses 6A , Glass Fuses 10A , Glass Fuses 16A , RJ45 connector , RJ45 connector Shielded , CAT6 Cable , Digital low current clamp meter , PUF Sealant 200ml , LAN Tester , Lug Crimping Tool , Tagari or Ghamela GI , Oil Pump , Chamois leather for cleaning purpose , Krone Tool , Silicon Sealant 200ml , Glass Putty of IS 419-1967 , WD 40 Spray Can , RJ45 Crimping tool , Soldering iron Soldron make Electric wattage 25 watt , Silicon sealant applicator Gun , Door mat 2 feet x 3 feet , Digital vernier Callipers , Supply of ARA Terminal blocks , M22 x 275MM, Bolt,Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut , M8, 2 Nut , M30 , 1 Nut, 1 Check Nut and 1 Washer , M12 x 100MM , Bolt, 4 Washer, Nut 3 SET , CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET , M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer , M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer , M22, Check Nut , M24, 1 Nut, 1 Check Nut , 5 by 8 x 2 inch BOLT HEX , 3 by 8 x 2 inch BOLT HEX , 3 by 8 x 1.5 inch BOLT HEX , 3 by 8 x 1 inch BOLT HEX , 3 by 8 x 0.75 inch BOLT HEX , Square Head 3 by 4 x 4.0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin , Square Head 3 by 4 x 5.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut , Square Head 3 by 4 x 3.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin , M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-7554841.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
49 Items Sign in to view GEM price trends Sign in for GEM prices
HRC Fuse cylindrical type-4A
HRC Fuse cylindrical type-4A RDSO approved
HRC Fuse cylindrical type-6A
HRC Fuse cylindrical type-6A(RDSO approved
HRC Fuse cylindrical type-10A
HRC Fuse cylindrical type-10A RDSO approved
HRC Fuse BS88 gG, offset blade type
HRC Fuse BS88 gG, offset blade type-10A RDSO approved
Glass Fuses 315mA
Glass Fuses 315mA
Glass Fuses 630mA
Glass Fuses 630mA
Glass Fuses 2A
Glass Fuses 2A
Glass Fuses 4A
Glass Fuses 4A
Glass Fuses 6A
Glass Fuses 6A
Glass Fuses 10A
Glass Fuses 10A
Glass Fuses 16A
Glass Fuses 16A
RJ45 connector
RJ45 connector
RJ45 connector Shielded
RJ45 connector Shielded
CAT6 Cable
CAT6 Cable
Digital low current clamp meter
Digital low current clamp meter to measure current leaks parasitic draw down to 1 mA and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply.
PUF Sealant 200ml
PUF Sealant 200ml
LAN Tester
LAN Tester Test the correct pin configuration of 10/100 Base-T 10 Base-2 Thin ethernet cable to verify cable continuity, oprn, short and miss wire
Lug Crimping Tool
Lug Crimping Tool
Tagari or Ghamela GI
Tagari or Ghamela GI
Oil Pump
Oil Pump
Chamois leather for cleaning purpose
Chamois leather for cleaning purpose 1 piece of size 600mm x 500mm or 2 piece of size 300mm x 250mm conforming to IS 1017 grade 2
Krone Tool
Krone Tool
Silicon Sealant 200ml
Silicon Sealant 200ml
Glass Putty of IS 419-1967
Glass Putty of IS 419-1967
WD 40 Spray Can
WD 40 Spray Can
RJ45 Crimping tool
RJ45 Crimping tool
Soldering iron Soldron make Electric wattage 25 watt
Soldering iron Soldron make Electric wattage 25 watt
Silicon sealant applicator Gun
Silicon sealant applicator Gun
Door mat 2 feet x 3 feet
Door mat 2 feet x 3 feet
Digital vernier Callipers
Digital vernier Callipers ( Measurement range 0-6 inch, 0-150mm resolution 0.01inch , 0.1mm accuracy plusminus 0.2mm,0.1 inch)
Supply of ARA Terminal blocks
Supply of ARA Terminal blocks small M6 made of PBT as per Specification no IRS- S-75-2006 Rev. 2 with latest amendment and RDSO Drg. No. SA-23741A -Alt-4
M22 x 275MM, Bolt,Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut
M22 x 275MM, Bolt,Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut
M8, 2 Nut
M8, 2 Nut
M30 , 1 Nut, 1 Check Nut and 1 Washer
M30 , 1 Nut, 1 Check Nut and 1 Washer
M12 x 100MM , Bolt, 4 Washer, Nut 3 SET
M12 x 100MM , Bolt, 4 Washer, Nut 3 SET
CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET
CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET
M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer
M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer
M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer
M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer
M22, Check Nut
M22, Check Nut
M24, 1 Nut, 1 Check Nut
M24, 1 Nut, 1 Check Nut
5 by 8 x 2 inch BOLT HEX
5 by 8 x 2 inch BOLT HEX
3 by 8 x 2 inch BOLT HEX
3 by 8 x 2 inch BOLT HEX
3 by 8 x 1.5 inch BOLT HEX
3 by 8 x 1.5 inch BOLT HEX
3 by 8 x 1 inch BOLT HEX
3 by 8 x 1 inch BOLT HEX
3 by 8 x 0.75 inch BOLT HEX
3 by 8 x 0.75 inch BOLT HEX
Square Head 3 by 4 x 4.0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin
Square Head 3 by 4 x 4.0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin
Square Head 3 by 4 x 5.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut
Square Head 3 by 4 x 5.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut
Square Head 3 by 4 x 3.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin
Square Head 3 by 4 x 3.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin
M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer
M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | HRC Fuse cylindrical type-4A | HRC Fuse cylindrical type-4A RDSO approved | 50 | nos | dypm_s_and_t_brc | 30 | |
| 2 | HRC Fuse cylindrical type-6A | HRC Fuse cylindrical type-6A(RDSO approved | 50 | nos | dypm_s_and_t_brc | 30 | |
| 3 | HRC Fuse cylindrical type-10A | HRC Fuse cylindrical type-10A RDSO approved | 100 | nos | dypm_s_and_t_brc | 30 | |
| 4 | HRC Fuse BS88 gG, offset blade type | HRC Fuse BS88 gG, offset blade type-10A RDSO approved | 50 | nos | dypm_s_and_t_brc | 30 | |
| 5 | Glass Fuses 315mA | Glass Fuses 315mA | 200 | nos | dypm_s_and_t_brc | 30 | |
| 6 | Glass Fuses 630mA | Glass Fuses 630mA | 200 | nos | dypm_s_and_t_brc | 30 | |
| 7 | Glass Fuses 2A | Glass Fuses 2A | 200 | nos | dypm_s_and_t_brc | 30 | |
| 8 | Glass Fuses 4A | Glass Fuses 4A | 100 | nos | dypm_s_and_t_brc | 30 | |
| 9 | Glass Fuses 6A | Glass Fuses 6A | 100 | nos | dypm_s_and_t_brc | 30 | |
| 10 | Glass Fuses 10A | Glass Fuses 10A | 100 | nos | dypm_s_and_t_brc | 30 | |
| 11 | Glass Fuses 16A | Glass Fuses 16A | 50 | nos | dypm_s_and_t_brc | 30 | |
| 12 | RJ45 connector | RJ45 connector | 100 | nos | dypm_s_and_t_brc | 30 | |
| 13 | RJ45 connector Shielded | RJ45 connector Shielded | 50 | nos | dypm_s_and_t_brc | 30 | |
| 14 | CAT6 Cable | CAT6 Cable | 500 | mtr | dypm_s_and_t_brc | 30 | |
| 15 | Digital low current clamp meter | Digital low current clamp meter to measure current leaks parasitic draw down to 1 mA and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | 5 | nos | dypm_s_and_t_brc | 30 | |
| 16 | PUF Sealant 200ml | PUF Sealant 200ml | 10 | nos | dypm_s_and_t_brc | 30 | |
| 17 | LAN Tester | LAN Tester Test the correct pin configuration of 10/100 Base-T 10 Base-2 Thin ethernet cable to verify cable continuity, oprn, short and miss wire | 5 | nos | dypm_s_and_t_brc | 30 | |
| 18 | Lug Crimping Tool | Lug Crimping Tool | 5 | nos | dypm_s_and_t_brc | 30 | |
| 19 | Tagari or Ghamela GI | Tagari or Ghamela GI | 10 | nos | dypm_s_and_t_brc | 30 | |
| 20 | Oil Pump | Oil Pump | 5 | nos | dypm_s_and_t_brc | 30 | |
| 21 | Chamois leather for cleaning purpose | Chamois leather for cleaning purpose 1 piece of size 600mm x 500mm or 2 piece of size 300mm x 250mm conforming to IS 1017 grade 2 | 5 | nos | dypm_s_and_t_brc | 30 | |
| 22 | Krone Tool | Krone Tool | 7 | nos | dypm_s_and_t_brc | 30 | |
| 23 | Silicon Sealant 200ml | Silicon Sealant 200ml | 25 | nos | dypm_s_and_t_brc | 30 | |
| 24 | Glass Putty of IS 419-1967 | Glass Putty of IS 419-1967 | 10 | kgs | dypm_s_and_t_brc | 30 | |
| 25 | WD 40 Spray Can | WD 40 Spray Can | 5 | nos | dypm_s_and_t_brc | 30 | |
| 26 | RJ45 Crimping tool | RJ45 Crimping tool | 5 | nos | dypm_s_and_t_brc | 30 | |
| 27 | Soldering iron Soldron make Electric wattage 25 watt | Soldering iron Soldron make Electric wattage 25 watt | 5 | nos | dypm_s_and_t_brc | 30 | |
| 28 | Silicon sealant applicator Gun | Silicon sealant applicator Gun | 5 | nos | dypm_s_and_t_brc | 30 | |
| 29 | Door mat 2 feet x 3 feet | Door mat 2 feet x 3 feet | 90 | nos | dypm_s_and_t_brc | 30 | |
| 30 | Digital vernier Callipers | Digital vernier Callipers ( Measurement range 0-6 inch, 0-150mm resolution 0.01inch , 0.1mm accuracy plusminus 0.2mm,0.1 inch) | 1 | nos | dypm_s_and_t_brc | 45 | |
| 31 | Supply of ARA Terminal blocks | Supply of ARA Terminal blocks small M6 made of PBT as per Specification no IRS- S-75-2006 Rev. 2 with latest amendment and RDSO Drg. No. SA-23741A -Alt-4 | 500 | nos | dypm_s_and_t_brc | 45 | |
| 32 | M22 x 275MM, Bolt,Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut | M22 x 275MM, Bolt,Nut, 2 Washer, 1 Spring Washer and 1 Lock Nut | 244 | set | dypm_s_and_t_brc | 45 | |
| 33 | M8, 2 Nut | M8, 2 Nut | 488 | set | dypm_s_and_t_brc | 45 | |
| 34 | M30 , 1 Nut, 1 Check Nut and 1 Washer | M30 , 1 Nut, 1 Check Nut and 1 Washer | 10 | set | dypm_s_and_t_brc | 45 | |
| 35 | M12 x 100MM , Bolt, 4 Washer, Nut 3 SET | M12 x 100MM , Bolt, 4 Washer, Nut 3 SET | 122 | set | dypm_s_and_t_brc | 45 | |
| 36 | CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET | CSK M6 x 30MM- Nut, Bolt, Spring Washer 2 SET | 20 | set | dypm_s_and_t_brc | 45 | |
| 37 | M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer | M20, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer | 20 | set | dypm_s_and_t_brc | 45 | |
| 38 | M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer | M24, 2 Nut, 1 Check Nut, 1 Spring washer, 1 washer | 20 | set | dypm_s_and_t_brc | 45 | |
| 39 | M22, Check Nut | M22, Check Nut | 40 | set | dypm_s_and_t_brc | 45 | |
| 40 | M24, 1 Nut, 1 Check Nut | M24, 1 Nut, 1 Check Nut | 20 | set | dypm_s_and_t_brc | 45 | |
| 41 | 5 by 8 x 2 inch BOLT HEX | 5 by 8 x 2 inch BOLT HEX | 20 | set | dypm_s_and_t_brc | 45 | |
| 42 | 3 by 8 x 2 inch BOLT HEX | 3 by 8 x 2 inch BOLT HEX | 20 | set | dypm_s_and_t_brc | 45 | |
| 43 | 3 by 8 x 1.5 inch BOLT HEX | 3 by 8 x 1.5 inch BOLT HEX | 20 | set | dypm_s_and_t_brc | 45 | |
| 44 | 3 by 8 x 1 inch BOLT HEX | 3 by 8 x 1 inch BOLT HEX | 20 | set | dypm_s_and_t_brc | 45 | |
| 45 | 3 by 8 x 0.75 inch BOLT HEX | 3 by 8 x 0.75 inch BOLT HEX | 20 | set | dypm_s_and_t_brc | 45 | |
| 46 | Square Head 3 by 4 x 4.0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin | Square Head 3 by 4 x 4.0 inch - 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin | 10 | set | dypm_s_and_t_brc | 45 | |
| 47 | Square Head 3 by 4 x 5.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut | Square Head 3 by 4 x 5.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut | 10 | set | dypm_s_and_t_brc | 45 | |
| 48 | Square Head 3 by 4 x 3.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin | Square Head 3 by 4 x 3.5 inch- 2 Washer, 1 Spring Washer, Nut, Check Nut, Locking Pin | 10 | set | dypm_s_and_t_brc | 45 | |
| 49 | M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer | M8 x 40 - 1 Nut, 1 Spring Washer and 1 Washer | 244 | set | dypm_s_and_t_brc | 45 |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | AGARWAL ARMY & GENERAL STORE(MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : HRC Fuse cylindrical type-4A,HRC Fuse cylindrical type-6A,HRC Fuse cylindrical type-10A,HRC Fuse BS | |
| L2 | G.S.MOTORS (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : HRC Fuse cylindrical type-4A,HRC Fuse cylindrical type-6A,HRC Fuse cylindrical type-10A,HRC Fuse BS | |
| L3 | DUDHERIA ENGINEERS (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : HRC Fuse cylindrical type-4A,HRC Fuse cylindrical type-6A,HRC Fuse cylindrical type-10A,HRC Fuse BS | |
| L4 | GARG SALES CORPORATION Under PMA | Item Categories : HRC Fuse cylindrical type-4A,HRC Fuse cylindrical type-6A,HRC Fuse cylindrical type-10A,HRC Fuse BS |
Frequently Asked Questions
Key insights about GUJARAT tender market
What are the eligibility requirements for participation in the procurement process?
The eligibility requirements encompass being a legally registered entity that can demonstrate capability in meeting the specifications outlined in the tender documents. Companies must possess the necessary certifications and should comply with all applicable laws and regulations. Additionally, specific provisions favoring Micro, Small, and Medium Enterprises (MSEs) may apply.
What certificates are required to participate in the procurement?
Bidders must present appropriate certificates demonstrating compliance with industry standards relevant to the goods being supplied. These may include quality assurance certifications, product safety certifications, and any other documentation as specified in the tender documentation, ensuring adherence to technical specifications and quality standards.
What is the process for registration and submission of documents?
All interested bidders must begin by registering as per the instructions provided in the tender documents. Following registration, submission of both technical and financial documents is required in specified formats to ensure compliance. The detailed process for document submission, including accepted document formats, is outlined within the tender document.
What are the financial conditions, including Earnest Money Deposit (EMD)?
Bidders are required to submit an Earnest Money Deposit (EMD) along with their bids, which acts as a safeguard against any withdrawal or changes to the bid during the evaluation period. The amount and specific terms regarding the EMD, including details about performance security and payment terms, are clearly defined in the tender documentation.
How will the evaluation and selection process be conducted?
The evaluation and selection process will involve reviewing both technical and financial submissions, with a scoring system in place to ensure transparency. Shortlisted bidders will be notified of their status, and the selection will be based on technical compliance and best pricing. Results and any pertinent updates will be communicated through official channels as outlined in the tender details.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-7554841.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS