Main Columns 04 Nos Gable column 04 Nos are made of MS SHS 70mm x 70mm x 3 point 20mm of 2750 mm Lo
Indian Army
PITHORAGARH, UTTARAKHAND
Posted:
29 May 2025
Closed:
19 June 2025
GEM
GEM
Indian Army Budgam Procurement Goods Supply Tender 2026 Jammu & Kashmir ISM/EH Data Sheet 5 Years Life
Bid Publish Date
05-Jun-2026, 11:04 pm
Bid End Date
19-Jun-2026, 6:00 pm
EMD
₹4,86,700
Location
Progress
Issue05-Jun-2026, 11:04 pm
Corrigendum06-Jun-2026
AwardPending
Quantity
146320
Category
Main Column of RHS 122x1x3.6 mm 9.67 Kgs per RM 3m length
Bid Type
Two Packet Bid
Tender Overview
The Indian Army, Department Of Military Affairs, invites a goods supply tender for operations in Budgam, Jammu & Kashmir. The bid requires the supply of assorted goods across a large BOQ (106 total items reported) with an EMD of ₹486,700. Bidders must ensure products are not obsolete and have at least 5 years residual market life. The contract emphasizes data sheet alignment, GST compliance, and government-supply experience, with a 50% quantity variation right. Aimed at vendors capable of nationwide government procurement, this tender seeks reliable, non-liquidated suppliers with robust data documentation.
Technical Specifications & Requirements
- Data Sheet of offered products must be uploaded and match the bid’s technical parameters. Any mismatch leads to rejection.
- Experience requirement: bidder or OEM must have supplied similar category products to Central/State Govt or PSU for at least 3 years prior to bid opening.
- Emphasis on life cycle: products should not be declared end-of-life by the OEM within the next 5 years.
- Hazardous materials handling provisions apply where applicable (MSDS, batch number, weights, shelf life).
- Scope: bid price to include all costs; scope limited to supply of goods, no services.
- Documents to submit: PAN, GSTIN, cancelled cheque, EFT mandate; ND declaration; non-disclosure.
- Delivery/dispatch: ensure proper packing with hazard labeling if needed, as per transport regulations.
Terms, Conditions & Eligibility
- EMD: ₹ 486,700.
- Quantity variation: Purchaser may increase/decrease up to 50% of bid quantity at contract placement.
- Data Sheet alignment: mandatory; any mismatch risks rejection.
- Document submissions: PAN, GSTIN, cancelled cheque, EFT mandate; NDA; data sheet; evidence of 3 years govt/PSU supply experience.
- GST: bidder bears GST applicability; reimbursement as per actuals or mandated rate, whichever lower.
- Bidder integrity: no liquidation or court receivership; undertaking required.
- Delivery terms: not explicitly defined in the data; ensure compliance with govt procurement norms.
Key Specifications
-
- EMD amount: ₹486,700
-
- Experience: minimum 3 years supplying similar category products to Govt/PSU
-
- Product life: items must have at least 5 years residual market life
-
- Data Sheet: must be uploaded and consistent with offered products
-
- GST handling: bidder bears GST; reimbursement limited to actuals or lower applicable rate
-
- Hazardous materials handling: MSDS, batch numbers, packing details for safety/regulatory compliance
-
- Tender scope: only supply of goods (no services) with all-inclusive bid price
Terms & Conditions
-
EMD amount is ₹486,700; bid must include applicable security deposit
-
Quantity can vary up to 50% by purchaser at contract placement
-
Data Sheet alignment is mandatory; any mismatch may lead to bid rejection
Important Clauses
Payment Terms
GST applicable to be borne by bidder; reimbursement will be as per actuals or applicable rate, whichever is lower
Delivery Schedule
Not explicitly specified; bidders should assume standard govt procurement delivery timelines and comply with NDA and data sheet terms
Penalties/Liquidated Damages
Not provided in data; bidders should anticipate standard govt LD provisions and contract clauses post award
Bidder Eligibility
-
Not under liquidation or court receivership
-
3 years govt/PSU supply experience for similar products
-
Data Sheet aligned product offering with no end-of-life status within 5 years
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Authority Records
MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT
Free Trial Available
Win more tenders with
real-time intelligence
Trusted by 5,000+ companies to find, track, and win government tenders.
Smart Alerts
Daily matched tenders to your inbox
Bid Results
See L1 winners & actual prices paid
Competitor Intel
Track rival companies & win patterns
Price Intelligence
BOQ rate trends to benchmark your bid
Book a Free Demo
See TenderDekho in action
Our team will walk you through the platform and help set up your profile — free, no commitment.
Demo booked!
Our team will reach out to schedule your free session.
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 5
GeM-Bidding-9429784.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Main columns will be made of 100m x 100m x 4mm square section of 3 length,Wind Breaker Columns C1 w
Indian Army
PITHORAGARH, UTTARAKHAND
Posted:
30 May 2025
Closed:
23 June 2025
GEM
Main columns will be made of 100m x 100m x 4mm square section of 3 length,Wind Breaker Columns C1 w
Indian Army
PITHORAGARH, UTTARAKHAND
Posted:
30 May 2025
Closed:
20 June 2025
GEM
PLYWOOD BWR 12-13MM x 7PLY x 1.2M x 1.2M
Munitions India Limited
JABALPUR, MADHYA PRADESH
Posted:
20 August 2025
Closed:
27 September 2025
GEM
Indian Army Detailed Design Drawings Tender West Bengal 2026 – EMD ₹32,000, 5/7 Day Drawings Approval
Indian Army
JALPAIGURI, WEST BENGAL
Posted:
4 January 2026
Closed:
26 January 2026
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
106 Items Sign in to view GEM price trends Sign in for GEM prices
#1
Main Column of RHS 122x1x3.6 mm 9.67 Kgs per RM 3m length
Main Column of RHS 122x61x3.6 mm (9.67 KgsperRM), 3.0m length each conforming to IS 4923.2017
320 nos
Delivery: 150 days
#2
Truss
Truss The principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 Kg per Rm) with 1 by 2 slopes. All other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 Kg per Rm). conforming to IS 4923.2017
160 nos
Delivery: 150 days
#3
Side Runner made of SHS 45x45x2.6mm thick
Side Runner made of SHS 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing U chanel for PIR panels
320 nos
Delivery: 150 days
#4
Purlin will be fabricated out of rectangular steel hollow sections
Purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 KgperRm) with cleats welded at both the ends conforming to IS 4923.2017
480 nos
Delivery: 150 days
#5
Extention Purlin shall be of 450mm long fabricated out of rectangular steel hollow sections
Extention Purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 KgperRm) with cleats welded at both the ends conforming to IS 4923.2017
960 nos
Delivery: 150 days
#6
Sun Shade frame with Sheet.
Sun Shade frame with Sheet- Sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to IS 14246-2024 (or IS 277-2018 Reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of ISA 40 x 40 x 5 mm (3.0 KgperRm) conforming to IS 808-2021.
80 nos
Delivery: 150 days
#7
Roofing Sheets
Roofing Sheets - 0.50 mm thick PPGI camouflage pattern (IS 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 GSM (IS 277-2018). Self-drilling hex washer head fasteners (hot-dip zinc).
800 nos
Delivery: 150 days
#8
False Ceiling Supporting Angle MS 65x65x5 mm
False Ceiling Supporting Angle - MS 65x65x5 mm for placing of PUF 40mm thick Length - 4180mm
80 nos
Delivery: 150 days
#9
False Ceiling Supporting L section of 50 x 50 x 5mm thick
False Ceiling Supporting L-section of 50 x 50 x 5mm thick (3.80 KgperRm) fixed appropriately to the truss for placing of PUF 40mm thick Length - 3000mm
480 nos
Delivery: 150 days
#10
Wall Puff Panel of size 1000 Width x 3000 Height, 40 mm 0.50 mm
Wall Puff Panel of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, camouflage ext per Off white, tongue & groove interlocking, conforming to IS 16203- 2016
1,520 nos
Delivery: 150 days
#11
Partition Wall Puff Panel of size 1000 Width x 3000 Height, 40 mm
Partition Wall Puff Panel of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, bothside off white colour (IntperExt), tongue & groove interlocking, conforming to IS 16203- 2016
880 nos
Delivery: 150 days
#12
Puff Panel for ceiling portion of size 1000 Width x 3000 Height, 40 mm
Puff Panel for ceiling portion of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, bothside off white colour (IntperExt), tongue & groove interlocking, conforming to IS 16203- 2016
560 nos
Delivery: 150 days
#13
Main External Door Size 1000x2100 mm
Main External Door - Size 1000x2100 mm (01 No) 2 mm thick aluminium frame (IS 1948-2024). Shutter- 40 mm PUF (0.50 mm PPGI both sides, . Fittings- 4 Nos magnetic hinges (100 mm HD), 2 AL sliding bolts (300 mm), AL tower bolt (200 mm), 2 D-handles, 1 helical door spring, door closer (IS 208-1996), padlock + 2 spare keys. Canopy 1300x450 mm with ISA 35x35x3 mm frame.
80 nos
Delivery: 150 days
#14
Internal Doors Size 750x2100 mm
Internal Doors - Size 750x2100 mm (06 Nos) 2 mm thick aluminium frame (IS 1948-2024). Shutter- 40 mm PUF (0.50 mm PPGI both sides. Fittings per door- 4 magnetic hinges (100 mm HD), 1 AL sliding bolt (300 mm), AL tower bolt (200 mm), 2 D-type handles (150 mm).
480 nos
Delivery: 150 days
#15
Fixed uPVC Window 1000x450 mm
Fixed uPVC Window - 1000x450 mm (01 No) Installed at ht 2.1 m from FFL. uPVC frame & shutter thick (IS 17953-2023). Double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (IS 2553 Pt 1-2018). Fixed GI wire mesh 18-20 G, (IS 4948-2002). Anodised aluminium grill on outer side (IS 733-1983). Rubberperneoprene packing for weather tightness.
80 nos
Delivery: 150 days
#16
Ventilators with Exhaust Fan 250 mm sweep
Ventilators with Exhaust Fan - 250 mm sweep (06 Nos) 4 Nos in toilet cubicles + 2 Nos in bathroom cubicles. UPVC frame 2 mm thick (IS 17953-2023). Shutter- 4 mm frostedperpinhead DG UPVC fibre glass, drop-flap type, opens internally. Fittings- hinges, eye hooks, tower bolt 100 mm (IS 15833-2009). Fly-proofing- SS wire mesh aperture on UPVC outer frame. Exhaust fan 200 mm with louver pre-cut at factory.
480 nos
Delivery: 150 days
#17
Inner corner Flashing 50x50x3000mm, 0.5mm thick
Inner corner Flashing 50x50x3000mm, 0.5mm thick
1,600 nos
Delivery: 150 days
#18
Bird Cover Flashing 50x250x3000mm, 0.5mm thick
Bird Cover Flashing 50x250x3000mm, 0.5mm thick
320 nos
Delivery: 150 days
#19
Outer Corner 3100mm x 200mm x 200mm
Outer Corner 3100mm x 200mm x 200mm
320 nos
Delivery: 150 days
#20
Ridge Cover 2400mm x 300x300mm
Ridge Cover 2400mm x 300x300mm
160 nos
Delivery: 150 days
#21
Top and Bottom U Flashing 40x40x65x1.5mm thick, 3000mm long
Top & Bottom U Flashing 40x40x65x1.5mm thick, 3000mm long conforming to IS 4923- 2017
1,680 nos
Delivery: 150 days
#22
MS Foundation Nut and Bolt 16x450mm incl water tank staging.
MS Foundation Nut & Bolt 16x450mm incl water tank staging.
2,560 nos
Delivery: 150 days
#23
MS Nut and Bolt with washer 12x50mm for coln and truss connection
MS Nut & Bolt with washer 12x50mm for coln and truss connection
2,880 nos
Delivery: 150 days
#24
MS Nut and Bolt with washer 12x100mm for connecting truss and purline
MS Nut & Bolt with washer 12x100mm for connecting truss and purline
2,240 nos
Delivery: 150 days
#25
MS Self Taping with washer Screw 10x75mm
MS Self Taping with washer Screw 10x75mm
16,000 nos
Delivery: 150 days
#26
MS Self Taping with washer Screw 10x 25mm
MS Self Taping with washer Screw 10x 25mm
12,000 nos
Delivery: 150 days
#27
MS Self Taping with washer Screw 10x 100mm
MS Self Taping with washer Screw 10x 100mm
8,000 nos
Delivery: 150 days
#28
Aluminium Pop Rivet 25mm 1000 Nos per packet
Aluminium Pop Rivet 25mm (1000 Nos per packet)
80 pkt
Delivery: 150 days
#29
Peg Sets SS Frame 450x60x12 mm with 6 Nos SS clothing pegs 75 mm each
Peg Sets - SS Frame 450x60x12 mm with 6 Nos SS clothing pegs (75 mm) each (IS 1363per1364per1367). 1 No per cubicle (6 cubicles total).
480 nos
Delivery: 150 days
#30
Silicon Sealant
Silicon Sealant - 280 ml Dr Fixit 501 (IS 12118 Pt1-1987) Premium acetoxy cure, with applicator gun. For sealing roofperwall panel gaps.
480 nos
Delivery: 150 days
#31
Bush Green colour paint
Bush Green colour paint
320 ltrs
Delivery: 150 days
#32
White colour paint
White colour paint
160 ltrs
Delivery: 150 days
#33
Brown colour paint
Brown colour paint
160 ltrs
Delivery: 150 days
#34
Primer red oxide
Primer red oxide
640 ltrs
Delivery: 150 days
#35
Turpentine oil
Turpentine oil
320 ltrs
Delivery: 150 days
#36
Column RHS 100x100x5mm thick
Column RHS 100x100x5mm thick conforming to IS 4923.2017 Length - 2.6m
320 nos
Delivery: 150 days
#37
Side Bracing ISA 50x50x5mm thick
Side Bracing ISA 50x50x5mm thick conforming to IS 4923.2017 Length - 2.9m
640 nos
Delivery: 150 days
#38
Base Plate Size 250 x 250x12mm
Base Plate Size - 250 x 250x12mm
320 nos
Delivery: 150 days
#39
Top Frame work of staging RHS 100x100x4mm, Length 2m
Top Frame work of staging RHS 100x100x4mm , Length - 2m
320 nos
Delivery: 150 days
#40
Top cross member for stage platform RHS 75x50x3mm, Length 2.82m
Top cross member for stage platform RHS 75x50x3mm , Length - 2.82m
160 nos
Delivery: 150 days
#41
Top Chequered plate 5mm thick for staging platform Size 2m x 2m
Top Chequered plate 5mm thick for staging platform Size - 2m x 2m
80 nos
Delivery: 150 days
#42
Aggregate 20mm.
Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out.
320 cum
Delivery: 150 days
#43
Aggregate 40mm.
Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out.
240 cum
Delivery: 150 days
#44
Manufacture Sand M Sand
Manufacture Sand(M-Sand)-- confirming to relevant IS 383-2016, crushed stone sand category. The material shall be free from clay, organic impurities and deleterious material. Grading shall conforming to Zone II for RCC work and Zone IIIperIV for masonry and plater works. Material passing through 75 micron sieve shall not exceed 15% only crushed M- sand from approved source shall be provided . Test certificate from NABL approved laboratory shall be submitted at the time of delivery.
320 cum
Delivery: 150 days
#45
PCC solid concrete blocks of size 400 mm x 200 mm x 200 mm
PCC solid concrete blocks of size 400 mm x 200 mm x 200 mm with a compressive strength of not less than 50 kgpercm2 (approximately 5 Npermm2 or 5 MPa). These solid blocks shall be manufactured using PCC mix 1-3-6 and shall fully conform to the latest applicable Indian Standard IS 2185 (Part 1)- 2005 (Reaffirmed 2020). The density of the block shall be 2400 kgperm3
16,480 nos
Delivery: 150 days
#46
White Cement IS 8042 2015 packet 01 Kg
White Cement IS 8042 - 2015 (packet 01 Kg)
400 kgs
Delivery: 150 days
#47
Non skid ceramic tiles as per IS 15622 2017
Non skid ceramic tiles as per IS 15622-2017 of size 300x300mm x 10mm mm thick 1st quality as per approved sample.
18,000 nos
Delivery: 150 days
#48
25mm thick factory made Chequered tiles of size 300mm x 300mm
25mm thick factory made Chequered tiles of size 300mm x 300mm made in grey cement with pigment conforming to IS 1237-2012 and IS-13801-2013 respectively.
3,200 nos
Delivery: 150 days
#49
Prefabricated foundation Reinforcement type F 2
Prefabricated foundation Reinforcement type F-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups as per drg including notes, cutting bending & binding with mild steel binding wire annealed not less then 0.90 mm dia complete all as per drg conforming to IS 1786 - 2008 (Reaffirmed 2023), IS 456- 2000 and IS 2502 - 2004 (Reaffirmed 2024
320 nos
Delivery: 150 days
#50
Quick setting compound Rapidite as per IS 2185 part I 2005.
Quick setting compound (Rapidite) as per IS 2185 (part-I) 2005.
2,560 ltr
Delivery: 150 days
#51
Liquid water proofing compound
Liquid water proofing compound IS-2645-2003 (Reaffirmed - 2005) (Using instruction-- Specification for integral waterproofing compounds at the time of making concrete as per the manufacturer instructions).
400 ltr
Delivery: 150 days
#52
10mm dia Reinforcement for water staging foundation
10mm dia Reinforcement for water staging foundation
2,000 kgs
Delivery: 150 days
#53
PVC ceiling rose 2 or 3 terminal as per IS 371 1999 Pilot 3 plate
PVC ceiling rose 2per3 terminal as per IS 371-1999(Pilot 3 plate)
1,280 nos
Delivery: 150 days
#54
LED Tube light fitting 1 x 12 W 2 feet long complete with all accessories
LED Tube light fitting 1 x 12 W 2 feet long complete with all accessories, including LED tube rod as per IS 10322 (Part 5perSec 1) -2026
560 nos
Delivery: 150 days
#55
Cable PVC insulated, unsheathed, single core, flexible copper conductor 1100V
Cable PVC insulated, unsheathed, single core, flexible copper conductor 1100V grade of size 1.5 Sqmm IS 694-2010,
4,000 rm
Delivery: 150 days
#56
XLPE insulated PVC seathed Heavy Duty armoured multi core cable 16 sqmm 2 core
XLPE insulated PVC seathed (Heavy Duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to & including 1100 volt confirming to relevant IS 1554 (Part - I) - 2020 per IS-7098 (Part - I) 2025 with latest amendments .
2,400 rm
Delivery: 150 days
#57
Modular Switch one way 6 AMPs one module
Modular Switch one way 6 AMPs one module confirming to IS 4160-2005
1,280 nos
Delivery: 150 days
#58
White cover plate with frame 2 module IS 3854 2023.
White cover plate with frame 2 module IS 3854 - 2023.
400 nos
Delivery: 150 days
#59
White cover plate with frame 3 module IS 3854 2023.
White cover plate with frame 3 module IS 3854 - 2023.
160 nos
Delivery: 150 days
#60
PVC flush box 2 Module IS 14772 2000.
PVC flush box 2 Module IS 14772 - 2000.
400 nos
Delivery: 150 days
#61
PVC flush box 3 Module IS 14772 2000.
PVC flush box 3 Module IS 14772 - 2000.
160 nos
Delivery: 150 days
#62
MCB Double Pole 230V AC, 50 Hz, 16 Amps, 10KA
MCB Double Pole 230V AC, 50 Hz, 16 Amps, 10KA confirming to IS - 8828-1996 IEC 60898 - 2002, suitable for lighting & other domestic loads.
80 nos
Delivery: 150 days
#63
MCB distribution board in sheet metal enclosure two ways with blanks
MCB distribution board in sheet metal enclosure two ways with blanks conforming to IS 8828 -1978,
80 nos
Delivery: 150 days
#64
MS Screw 20 mm full threaded Per Pkt 100 Nos
MS Screw 20 mm full threaded (Per Pkt-100 Nos) conforming to IS 723-1972
320 pkt
Delivery: 150 days
#65
Tape Insulation 2 cm width 10 mtr long ISI marked
Tape Insulation 2 cm width 10 mtr long ISI marked
320 nos
Delivery: 150 days
#66
PVC casing caping 25 mm x 16mm IS 14927 Part 2.
PVC casing caping 25 mm x 16mm IS 14927 (Part-2).
4,000 rm
Delivery: 150 days
#67
PVC casing caping 25 mm x 16mm IS 14927 Part 2.
PVC casing caping square box 4 x 4 inch as per IS 14927 (Part-2).
1,200 nos
Delivery: 150 days
#68
Plastic Body Exhaust fan, 250mm sweep size with all fittings
Plastic Body Exhaust fan, 250mm sweep size with all fittings as per IS 2312 -1967 (Reaffirmed 2020)
480 nos
Delivery: 150 days
#69
3 Layer PPR Polypropylene random copolymer Pipes SDR 7.4 UV stablised, 20 mm dia
3 Layer PP-R Polypropylene random copolymer) Pipes SDR 7.4 UV stablised and 20 mm dia, thickness of wall 2.20 confirming to relevant IS 15801-2008
4,000 rm
Delivery: 150 days
#70
20mm elbow suitable for 20 mm dia PPR pipe
20mm elbow suitable for 20 mm dia PP-R pipe confirming to relevant IS 15801-2008 (Reaffirmed 2022)
2,400 nos
Delivery: 150 days
#71
20mm socket suitable for 20mm dia PPR pipes
20mm socket suitable for 20mm dia PP-R pipes confirming to relevant IS 15801-2008 (Reaffirmed 2022)
1,600 nos
Delivery: 150 days
#72
20mm equal Tee suitable for 20mm dia PPR pipe
20mm equal Tee suitable for 20mm dia PP-R pipe confirming to relevant IS 15801-2008 (Reaffirmed 2022)
1,600 nos
Delivery: 150 days
#73
20mm Union suitable for 20mm PPR pipes
20mm Union suitable for 20mm PP-R pipes confirming to relevant IS 15801-2008 (Reaffirmed 2022)
1,200 nos
Delivery: 150 days
#74
PPR Femel threaded reducer Socket 15 or 20mm
PPR Femel threaded reducer Socket 15per20mm IS 15801-2008 (Reaffirmed 2022)
640 nos
Delivery: 150 days
#75
PPR Femel threaded reducer Elbow 15 or 20 mm
PPR Femel threaded reducer Elbow 15per20 mm IS 15801-2008 (Reaffirmed 2022)
720 nos
Delivery: 150 days
#76
PPR End Plug 20mm confirming to relevant IS
PP-R End Plug 20mm confirming to relevant IS IS 15801-2008 (Reaffirmed 2022).
160 nos
Delivery: 150 days
#77
PPR Pipe clamps suitable for 20mm piping
PP-R Pipe clamps suitable for 20mm piping IS 15801-2008 (Reaffirmed 2022)
3,200 nos
Delivery: 150 days
#78
CP Angle cock 2 way 20mm
CP Angle cock 2 way 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022)
640 nos
Delivery: 150 days
#79
CP Angle cock 20mm
CP Angle cock 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022)
320 nos
Delivery: 150 days
#80
CP Stop cock 20mm
CP Stop cock 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022)
160 nos
Delivery: 150 days
#81
Bib Tap short body CP 20mm bore suitable for PPR water supply line
Bib Tap short body CP 20mm bore suitable for PPR water supply line . ISI marked, conforming to IS 781 -1984.
320 nos
Delivery: 150 days
#82
PPR Tank Connector 20mm with check nut and washer
PP-R Tank Connector 20mm with check nut and washer IS 15801-2008
160 nos
Delivery: 150 days
#83
Supply of 2000 litre capacity PVC rotational moulded polyethylene water storage tank
Supply of 2000 litre capacity PVC rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittingsper fixtures for connecting inlet, outlet, washout and overflow pipes, hoisted incl ball brass valve, high pressure with polythene float and flynut complete
80 nos
Delivery: 150 days
#84
Snow white colour EWC with S or P trap concealed of size 650x405x770mm with sheet cover.
Snow white colour EWC with S or P trap concealed of size 650x405x770mm wih sheet cover.
80 set
Delivery: 150 days
#85
Vitreous China squatting pan
Vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern but incluing flush pipe (L Pipe) and with with P or S trap front or back inlet complete all as specified and as directed .
240 set
Delivery: 150 days
#86
PVC valve less syphonic action type low level flushing cistern 10 ltrs capacity
PVC valve less syphonic action type low level flushing cistern 10 ltrs capacity Col - white with flushing pipe to match European type WC incl 15mm PVC connecting pipe with fixing Brackets complete accessories. Conforming to IS 774-1984.
320 set
Delivery: 150 days
#87
Ceramic Wash Basin snow white, oval bowl type with full pedestal height 795mm
Ceramic Wash Basin snow white, oval bowl type with full pedestal height 795mm, size 550 x 400 x 155mm depth with stainless steel heavy quality Bottle Trap set with height adjustable waste outlet pipe for wash basin as per IS 2556 - 2021 (Part 4)-2021,
80 set
Delivery: 150 days
#88
600mm x 450mm looking mirror cabinet with PVC moulded frame.
600mm x 450mm looking mirror cabinet with PVC moulded frame. As per HS Code 700999200
160 set
Delivery: 150 days
#89
CP Over head shower without arm
CP Over head shower without arm confirming to relevant IS 1172-1993 (Reaffirmed in 2022).
160 nos
Delivery: 150 days
#90
CP Soap dish for one soap
CP Soap dish for one soap confirming to relevant IS 2556-2004.
160 nos
Delivery: 150 days
#91
CP Toilet paper holder
CP Toilet paper holder (HSNperHS CODE 74182010)
80 nos
Delivery: 150 days
#92
CP Health faucet ABS Body
CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position HSN 39229000,
80 set
Delivery: 150 days
#93
Wash Basin Mixer Tap Hot and Cold
Wash Basin Mixer Tap (Hot and Cold)- Long body decorative type pillar tap of 20 mm nominal diameter, chromium plated, heavy duty, ISI marked, suitable for 20 mm PPR water supply line, conforming to IS 1795 (latest), including necessary connecting accessories.
80 set
Delivery: 150 days
#94
Brass chromium plated Bib Cock long body 15mm
Brass chromium plated Bib Cock long body 15mm
160 nos
Delivery: 150 days
#95
Teflon Tape
Teflon Tape IS 14643-1999
480 nos
Delivery: 150 days
#96
110 x 110mm CP Nahani trap with jali
110 x 110mm CP Nahani trap with jali IS 14735 -1999 (Reaffirmed 2021)
480 nos
Delivery: 150 days
#97
PVC SWR floor traps 75mm bore and jointing to waste pipe in solvent cement with CP grating.
PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith CP grating .
480 nos
Delivery: 150 days
#98
75mm bore PVC SWR soil, waste and vent pipe, in any length, with rubber joints
75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall as per IS 13592-2013
1,200 rm
Delivery: 150 days
#99
110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to wall and floor
110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to wallsperfloor complete all as specified and directed as per IS 13592-2013
1,200 rm
Delivery: 150 days
#100
75mm or 110mm PVC SWR reducer complete
75mm per110mm PVC (SWR) reducer complete all as specified as per IS 14735 -1999
400 nos
Delivery: 150 days
#101
110mm PVC SWR junction single, Single T equal or unequal complete
110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified as per IS 14735 -1999
640 nos
Delivery: 150 days
#102
PVC SWR bend any radius 110mm bore as per IS 10124 Part 9 or 10 of 2009
PVC (SWR) bend any radius 110mm bore complete all as specified and directed as per IS 10124 (Part 9 or 10) -2009
640 nos
Delivery: 150 days
#103
75mm PVC SWR vent cowl complete
75mm PVC (SWR) vent cowl complete all as specified as per IS 13592-2013
320 nos
Delivery: 150 days
#104
PPR gate valves, with iron wheel head, screwed both end
PPR gate valves, with iron wheel head, screwed both end for PPR pipe and fixed to 20 mm bore PPR Pipe complette all as specified and as directed.
160 nos
Delivery: 150 days
#105
Anaerobic Advance Septic Tank.
Anaerobic Advance Septic Tank. Supply of PWTs Service Polyethylene Tank (Advance Version Septic Tank) with capacity of 1500 ltr diameter of 1300mm and height of 1400mm. Drawing and Features as per Appx B confirming on IS 2470 (Part-1 and 2)- 1985 (Reaffirmed 2017) .
80 nos
Delivery: 150 days
#106
Store for Anaerobic Advance Septic Tank as per list attached as Annexure 1
Store for Anaerobic Advance Septic Tank as per list attached as Annexure 1
80 set
Delivery: 150 days
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Main Column of RHS 122x1x3.6 mm 9.67 Kgs per RM 3m length | Main Column of RHS 122x61x3.6 mm (9.67 KgsperRM), 3.0m length each conforming to IS 4923.2017 | 320 | nos | epo@17er | 150 | |
| 2 | Truss | Truss The principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 Kg per Rm) with 1 by 2 slopes. All other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 Kg per Rm). conforming to IS 4923.2017 | 160 | nos | epo@17er | 150 | |
| 3 | Side Runner made of SHS 45x45x2.6mm thick | Side Runner made of SHS 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing U chanel for PIR panels | 320 | nos | epo@17er | 150 | |
| 4 | Purlin will be fabricated out of rectangular steel hollow sections | Purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 KgperRm) with cleats welded at both the ends conforming to IS 4923.2017 | 480 | nos | epo@17er | 150 | |
| 5 | Extention Purlin shall be of 450mm long fabricated out of rectangular steel hollow sections | Extention Purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 KgperRm) with cleats welded at both the ends conforming to IS 4923.2017 | 960 | nos | epo@17er | 150 | |
| 6 | Sun Shade frame with Sheet. | Sun Shade frame with Sheet- Sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to IS 14246-2024 (or IS 277-2018 Reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of ISA 40 x 40 x 5 mm (3.0 KgperRm) conforming to IS 808-2021. | 80 | nos | epo@17er | 150 | |
| 7 | Roofing Sheets | Roofing Sheets - 0.50 mm thick PPGI camouflage pattern (IS 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 GSM (IS 277-2018). Self-drilling hex washer head fasteners (hot-dip zinc). | 800 | nos | epo@17er | 150 | |
| 8 | False Ceiling Supporting Angle MS 65x65x5 mm | False Ceiling Supporting Angle - MS 65x65x5 mm for placing of PUF 40mm thick Length - 4180mm | 80 | nos | epo@17er | 150 | |
| 9 | False Ceiling Supporting L section of 50 x 50 x 5mm thick | False Ceiling Supporting L-section of 50 x 50 x 5mm thick (3.80 KgperRm) fixed appropriately to the truss for placing of PUF 40mm thick Length - 3000mm | 480 | nos | epo@17er | 150 | |
| 10 | Wall Puff Panel of size 1000 Width x 3000 Height, 40 mm 0.50 mm | Wall Puff Panel of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, camouflage ext per Off white, tongue & groove interlocking, conforming to IS 16203- 2016 | 1,520 | nos | epo@17er | 150 | |
| 11 | Partition Wall Puff Panel of size 1000 Width x 3000 Height, 40 mm | Partition Wall Puff Panel of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, bothside off white colour (IntperExt), tongue & groove interlocking, conforming to IS 16203- 2016 | 880 | nos | epo@17er | 150 | |
| 12 | Puff Panel for ceiling portion of size 1000 Width x 3000 Height, 40 mm | Puff Panel for ceiling portion of size (1000 (W) x 3000 (Ht), 40 mm 0.50 mm colour-coated GI both sides, bothside off white colour (IntperExt), tongue & groove interlocking, conforming to IS 16203- 2016 | 560 | nos | epo@17er | 150 | |
| 13 | Main External Door Size 1000x2100 mm | Main External Door - Size 1000x2100 mm (01 No) 2 mm thick aluminium frame (IS 1948-2024). Shutter- 40 mm PUF (0.50 mm PPGI both sides, . Fittings- 4 Nos magnetic hinges (100 mm HD), 2 AL sliding bolts (300 mm), AL tower bolt (200 mm), 2 D-handles, 1 helical door spring, door closer (IS 208-1996), padlock + 2 spare keys. Canopy 1300x450 mm with ISA 35x35x3 mm frame. | 80 | nos | epo@17er | 150 | |
| 14 | Internal Doors Size 750x2100 mm | Internal Doors - Size 750x2100 mm (06 Nos) 2 mm thick aluminium frame (IS 1948-2024). Shutter- 40 mm PUF (0.50 mm PPGI both sides. Fittings per door- 4 magnetic hinges (100 mm HD), 1 AL sliding bolt (300 mm), AL tower bolt (200 mm), 2 D-type handles (150 mm). | 480 | nos | epo@17er | 150 | |
| 15 | Fixed uPVC Window 1000x450 mm | Fixed uPVC Window - 1000x450 mm (01 No) Installed at ht 2.1 m from FFL. uPVC frame & shutter thick (IS 17953-2023). Double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (IS 2553 Pt 1-2018). Fixed GI wire mesh 18-20 G, (IS 4948-2002). Anodised aluminium grill on outer side (IS 733-1983). Rubberperneoprene packing for weather tightness. | 80 | nos | epo@17er | 150 | |
| 16 | Ventilators with Exhaust Fan 250 mm sweep | Ventilators with Exhaust Fan - 250 mm sweep (06 Nos) 4 Nos in toilet cubicles + 2 Nos in bathroom cubicles. UPVC frame 2 mm thick (IS 17953-2023). Shutter- 4 mm frostedperpinhead DG UPVC fibre glass, drop-flap type, opens internally. Fittings- hinges, eye hooks, tower bolt 100 mm (IS 15833-2009). Fly-proofing- SS wire mesh aperture on UPVC outer frame. Exhaust fan 200 mm with louver pre-cut at factory. | 480 | nos | epo@17er | 150 | |
| 17 | Inner corner Flashing 50x50x3000mm, 0.5mm thick | Inner corner Flashing 50x50x3000mm, 0.5mm thick | 1,600 | nos | epo@17er | 150 | |
| 18 | Bird Cover Flashing 50x250x3000mm, 0.5mm thick | Bird Cover Flashing 50x250x3000mm, 0.5mm thick | 320 | nos | epo@17er | 150 | |
| 19 | Outer Corner 3100mm x 200mm x 200mm | Outer Corner 3100mm x 200mm x 200mm | 320 | nos | epo@17er | 150 | |
| 20 | Ridge Cover 2400mm x 300x300mm | Ridge Cover 2400mm x 300x300mm | 160 | nos | epo@17er | 150 | |
| 21 | Top and Bottom U Flashing 40x40x65x1.5mm thick, 3000mm long | Top & Bottom U Flashing 40x40x65x1.5mm thick, 3000mm long conforming to IS 4923- 2017 | 1,680 | nos | epo@17er | 150 | |
| 22 | MS Foundation Nut and Bolt 16x450mm incl water tank staging. | MS Foundation Nut & Bolt 16x450mm incl water tank staging. | 2,560 | nos | epo@17er | 150 | |
| 23 | MS Nut and Bolt with washer 12x50mm for coln and truss connection | MS Nut & Bolt with washer 12x50mm for coln and truss connection | 2,880 | nos | epo@17er | 150 | |
| 24 | MS Nut and Bolt with washer 12x100mm for connecting truss and purline | MS Nut & Bolt with washer 12x100mm for connecting truss and purline | 2,240 | nos | epo@17er | 150 | |
| 25 | MS Self Taping with washer Screw 10x75mm | MS Self Taping with washer Screw 10x75mm | 16,000 | nos | epo@17er | 150 | |
| 26 | MS Self Taping with washer Screw 10x 25mm | MS Self Taping with washer Screw 10x 25mm | 12,000 | nos | epo@17er | 150 | |
| 27 | MS Self Taping with washer Screw 10x 100mm | MS Self Taping with washer Screw 10x 100mm | 8,000 | nos | epo@17er | 150 | |
| 28 | Aluminium Pop Rivet 25mm 1000 Nos per packet | Aluminium Pop Rivet 25mm (1000 Nos per packet) | 80 | pkt | epo@17er | 150 | |
| 29 | Peg Sets SS Frame 450x60x12 mm with 6 Nos SS clothing pegs 75 mm each | Peg Sets - SS Frame 450x60x12 mm with 6 Nos SS clothing pegs (75 mm) each (IS 1363per1364per1367). 1 No per cubicle (6 cubicles total). | 480 | nos | epo@17er | 150 | |
| 30 | Silicon Sealant | Silicon Sealant - 280 ml Dr Fixit 501 (IS 12118 Pt1-1987) Premium acetoxy cure, with applicator gun. For sealing roofperwall panel gaps. | 480 | nos | epo@17er | 150 | |
| 31 | Bush Green colour paint | Bush Green colour paint | 320 | ltrs | epo@17er | 150 | |
| 32 | White colour paint | White colour paint | 160 | ltrs | epo@17er | 150 | |
| 33 | Brown colour paint | Brown colour paint | 160 | ltrs | epo@17er | 150 | |
| 34 | Primer red oxide | Primer red oxide | 640 | ltrs | epo@17er | 150 | |
| 35 | Turpentine oil | Turpentine oil | 320 | ltrs | epo@17er | 150 | |
| 36 | Column RHS 100x100x5mm thick | Column RHS 100x100x5mm thick conforming to IS 4923.2017 Length - 2.6m | 320 | nos | epo@17er | 150 | |
| 37 | Side Bracing ISA 50x50x5mm thick | Side Bracing ISA 50x50x5mm thick conforming to IS 4923.2017 Length - 2.9m | 640 | nos | epo@17er | 150 | |
| 38 | Base Plate Size 250 x 250x12mm | Base Plate Size - 250 x 250x12mm | 320 | nos | epo@17er | 150 | |
| 39 | Top Frame work of staging RHS 100x100x4mm, Length 2m | Top Frame work of staging RHS 100x100x4mm , Length - 2m | 320 | nos | epo@17er | 150 | |
| 40 | Top cross member for stage platform RHS 75x50x3mm, Length 2.82m | Top cross member for stage platform RHS 75x50x3mm , Length - 2.82m | 160 | nos | epo@17er | 150 | |
| 41 | Top Chequered plate 5mm thick for staging platform Size 2m x 2m | Top Chequered plate 5mm thick for staging platform Size - 2m x 2m | 80 | nos | epo@17er | 150 | |
| 42 | Aggregate 20mm. | Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out. | 320 | cum | epo@17er | 150 | |
| 43 | Aggregate 40mm. | Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out. | 240 | cum | epo@17er | 150 | |
| 44 | Manufacture Sand M Sand | Manufacture Sand(M-Sand)-- confirming to relevant IS 383-2016, crushed stone sand category. The material shall be free from clay, organic impurities and deleterious material. Grading shall conforming to Zone II for RCC work and Zone IIIperIV for masonry and plater works. Material passing through 75 micron sieve shall not exceed 15% only crushed M- sand from approved source shall be provided . Test certificate from NABL approved laboratory shall be submitted at the time of delivery. | 320 | cum | epo@17er | 150 | |
| 45 | PCC solid concrete blocks of size 400 mm x 200 mm x 200 mm | PCC solid concrete blocks of size 400 mm x 200 mm x 200 mm with a compressive strength of not less than 50 kgpercm2 (approximately 5 Npermm2 or 5 MPa). These solid blocks shall be manufactured using PCC mix 1-3-6 and shall fully conform to the latest applicable Indian Standard IS 2185 (Part 1)- 2005 (Reaffirmed 2020). The density of the block shall be 2400 kgperm3 | 16,480 | nos | epo@17er | 150 | |
| 46 | White Cement IS 8042 2015 packet 01 Kg | White Cement IS 8042 - 2015 (packet 01 Kg) | 400 | kgs | epo@17er | 150 | |
| 47 | Non skid ceramic tiles as per IS 15622 2017 | Non skid ceramic tiles as per IS 15622-2017 of size 300x300mm x 10mm mm thick 1st quality as per approved sample. | 18,000 | nos | epo@17er | 150 | |
| 48 | 25mm thick factory made Chequered tiles of size 300mm x 300mm | 25mm thick factory made Chequered tiles of size 300mm x 300mm made in grey cement with pigment conforming to IS 1237-2012 and IS-13801-2013 respectively. | 3,200 | nos | epo@17er | 150 | |
| 49 | Prefabricated foundation Reinforcement type F 2 | Prefabricated foundation Reinforcement type F-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups as per drg including notes, cutting bending & binding with mild steel binding wire annealed not less then 0.90 mm dia complete all as per drg conforming to IS 1786 - 2008 (Reaffirmed 2023), IS 456- 2000 and IS 2502 - 2004 (Reaffirmed 2024 | 320 | nos | epo@17er | 150 | |
| 50 | Quick setting compound Rapidite as per IS 2185 part I 2005. | Quick setting compound (Rapidite) as per IS 2185 (part-I) 2005. | 2,560 | ltr | epo@17er | 150 | |
| 51 | Liquid water proofing compound | Liquid water proofing compound IS-2645-2003 (Reaffirmed - 2005) (Using instruction-- Specification for integral waterproofing compounds at the time of making concrete as per the manufacturer instructions). | 400 | ltr | epo@17er | 150 | |
| 52 | 10mm dia Reinforcement for water staging foundation | 10mm dia Reinforcement for water staging foundation | 2,000 | kgs | epo@17er | 150 | |
| 53 | PVC ceiling rose 2 or 3 terminal as per IS 371 1999 Pilot 3 plate | PVC ceiling rose 2per3 terminal as per IS 371-1999(Pilot 3 plate) | 1,280 | nos | epo@17er | 150 | |
| 54 | LED Tube light fitting 1 x 12 W 2 feet long complete with all accessories | LED Tube light fitting 1 x 12 W 2 feet long complete with all accessories, including LED tube rod as per IS 10322 (Part 5perSec 1) -2026 | 560 | nos | epo@17er | 150 | |
| 55 | Cable PVC insulated, unsheathed, single core, flexible copper conductor 1100V | Cable PVC insulated, unsheathed, single core, flexible copper conductor 1100V grade of size 1.5 Sqmm IS 694-2010, | 4,000 | rm | epo@17er | 150 | |
| 56 | XLPE insulated PVC seathed Heavy Duty armoured multi core cable 16 sqmm 2 core | XLPE insulated PVC seathed (Heavy Duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to & including 1100 volt confirming to relevant IS 1554 (Part - I) - 2020 per IS-7098 (Part - I) 2025 with latest amendments . | 2,400 | rm | epo@17er | 150 | |
| 57 | Modular Switch one way 6 AMPs one module | Modular Switch one way 6 AMPs one module confirming to IS 4160-2005 | 1,280 | nos | epo@17er | 150 | |
| 58 | White cover plate with frame 2 module IS 3854 2023. | White cover plate with frame 2 module IS 3854 - 2023. | 400 | nos | epo@17er | 150 | |
| 59 | White cover plate with frame 3 module IS 3854 2023. | White cover plate with frame 3 module IS 3854 - 2023. | 160 | nos | epo@17er | 150 | |
| 60 | PVC flush box 2 Module IS 14772 2000. | PVC flush box 2 Module IS 14772 - 2000. | 400 | nos | epo@17er | 150 | |
| 61 | PVC flush box 3 Module IS 14772 2000. | PVC flush box 3 Module IS 14772 - 2000. | 160 | nos | epo@17er | 150 | |
| 62 | MCB Double Pole 230V AC, 50 Hz, 16 Amps, 10KA | MCB Double Pole 230V AC, 50 Hz, 16 Amps, 10KA confirming to IS - 8828-1996 IEC 60898 - 2002, suitable for lighting & other domestic loads. | 80 | nos | epo@17er | 150 | |
| 63 | MCB distribution board in sheet metal enclosure two ways with blanks | MCB distribution board in sheet metal enclosure two ways with blanks conforming to IS 8828 -1978, | 80 | nos | epo@17er | 150 | |
| 64 | MS Screw 20 mm full threaded Per Pkt 100 Nos | MS Screw 20 mm full threaded (Per Pkt-100 Nos) conforming to IS 723-1972 | 320 | pkt | epo@17er | 150 | |
| 65 | Tape Insulation 2 cm width 10 mtr long ISI marked | Tape Insulation 2 cm width 10 mtr long ISI marked | 320 | nos | epo@17er | 150 | |
| 66 | PVC casing caping 25 mm x 16mm IS 14927 Part 2. | PVC casing caping 25 mm x 16mm IS 14927 (Part-2). | 4,000 | rm | epo@17er | 150 | |
| 67 | PVC casing caping 25 mm x 16mm IS 14927 Part 2. | PVC casing caping square box 4 x 4 inch as per IS 14927 (Part-2). | 1,200 | nos | epo@17er | 150 | |
| 68 | Plastic Body Exhaust fan, 250mm sweep size with all fittings | Plastic Body Exhaust fan, 250mm sweep size with all fittings as per IS 2312 -1967 (Reaffirmed 2020) | 480 | nos | epo@17er | 150 | |
| 69 | 3 Layer PPR Polypropylene random copolymer Pipes SDR 7.4 UV stablised, 20 mm dia | 3 Layer PP-R Polypropylene random copolymer) Pipes SDR 7.4 UV stablised and 20 mm dia, thickness of wall 2.20 confirming to relevant IS 15801-2008 | 4,000 | rm | epo@17er | 150 | |
| 70 | 20mm elbow suitable for 20 mm dia PPR pipe | 20mm elbow suitable for 20 mm dia PP-R pipe confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 2,400 | nos | epo@17er | 150 | |
| 71 | 20mm socket suitable for 20mm dia PPR pipes | 20mm socket suitable for 20mm dia PP-R pipes confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 1,600 | nos | epo@17er | 150 | |
| 72 | 20mm equal Tee suitable for 20mm dia PPR pipe | 20mm equal Tee suitable for 20mm dia PP-R pipe confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 1,600 | nos | epo@17er | 150 | |
| 73 | 20mm Union suitable for 20mm PPR pipes | 20mm Union suitable for 20mm PP-R pipes confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 1,200 | nos | epo@17er | 150 | |
| 74 | PPR Femel threaded reducer Socket 15 or 20mm | PPR Femel threaded reducer Socket 15per20mm IS 15801-2008 (Reaffirmed 2022) | 640 | nos | epo@17er | 150 | |
| 75 | PPR Femel threaded reducer Elbow 15 or 20 mm | PPR Femel threaded reducer Elbow 15per20 mm IS 15801-2008 (Reaffirmed 2022) | 720 | nos | epo@17er | 150 | |
| 76 | PPR End Plug 20mm confirming to relevant IS | PP-R End Plug 20mm confirming to relevant IS IS 15801-2008 (Reaffirmed 2022). | 160 | nos | epo@17er | 150 | |
| 77 | PPR Pipe clamps suitable for 20mm piping | PP-R Pipe clamps suitable for 20mm piping IS 15801-2008 (Reaffirmed 2022) | 3,200 | nos | epo@17er | 150 | |
| 78 | CP Angle cock 2 way 20mm | CP Angle cock 2 way 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 640 | nos | epo@17er | 150 | |
| 79 | CP Angle cock 20mm | CP Angle cock 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 320 | nos | epo@17er | 150 | |
| 80 | CP Stop cock 20mm | CP Stop cock 20mm confirming to relevant IS 15801-2008 (Reaffirmed 2022) | 160 | nos | epo@17er | 150 | |
| 81 | Bib Tap short body CP 20mm bore suitable for PPR water supply line | Bib Tap short body CP 20mm bore suitable for PPR water supply line . ISI marked, conforming to IS 781 -1984. | 320 | nos | epo@17er | 150 | |
| 82 | PPR Tank Connector 20mm with check nut and washer | PP-R Tank Connector 20mm with check nut and washer IS 15801-2008 | 160 | nos | epo@17er | 150 | |
| 83 | Supply of 2000 litre capacity PVC rotational moulded polyethylene water storage tank | Supply of 2000 litre capacity PVC rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittingsper fixtures for connecting inlet, outlet, washout and overflow pipes, hoisted incl ball brass valve, high pressure with polythene float and flynut complete | 80 | nos | epo@17er | 150 | |
| 84 | Snow white colour EWC with S or P trap concealed of size 650x405x770mm with sheet cover. | Snow white colour EWC with S or P trap concealed of size 650x405x770mm wih sheet cover. | 80 | set | epo@17er | 150 | |
| 85 | Vitreous China squatting pan | Vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern but incluing flush pipe (L Pipe) and with with P or S trap front or back inlet complete all as specified and as directed . | 240 | set | epo@17er | 150 | |
| 86 | PVC valve less syphonic action type low level flushing cistern 10 ltrs capacity | PVC valve less syphonic action type low level flushing cistern 10 ltrs capacity Col - white with flushing pipe to match European type WC incl 15mm PVC connecting pipe with fixing Brackets complete accessories. Conforming to IS 774-1984. | 320 | set | epo@17er | 150 | |
| 87 | Ceramic Wash Basin snow white, oval bowl type with full pedestal height 795mm | Ceramic Wash Basin snow white, oval bowl type with full pedestal height 795mm, size 550 x 400 x 155mm depth with stainless steel heavy quality Bottle Trap set with height adjustable waste outlet pipe for wash basin as per IS 2556 - 2021 (Part 4)-2021, | 80 | set | epo@17er | 150 | |
| 88 | 600mm x 450mm looking mirror cabinet with PVC moulded frame. | 600mm x 450mm looking mirror cabinet with PVC moulded frame. As per HS Code 700999200 | 160 | set | epo@17er | 150 | |
| 89 | CP Over head shower without arm | CP Over head shower without arm confirming to relevant IS 1172-1993 (Reaffirmed in 2022). | 160 | nos | epo@17er | 150 | |
| 90 | CP Soap dish for one soap | CP Soap dish for one soap confirming to relevant IS 2556-2004. | 160 | nos | epo@17er | 150 | |
| 91 | CP Toilet paper holder | CP Toilet paper holder (HSNperHS CODE 74182010) | 80 | nos | epo@17er | 150 | |
| 92 | CP Health faucet ABS Body | CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position HSN 39229000, | 80 | set | epo@17er | 150 | |
| 93 | Wash Basin Mixer Tap Hot and Cold | Wash Basin Mixer Tap (Hot and Cold)- Long body decorative type pillar tap of 20 mm nominal diameter, chromium plated, heavy duty, ISI marked, suitable for 20 mm PPR water supply line, conforming to IS 1795 (latest), including necessary connecting accessories. | 80 | set | epo@17er | 150 | |
| 94 | Brass chromium plated Bib Cock long body 15mm | Brass chromium plated Bib Cock long body 15mm | 160 | nos | epo@17er | 150 | |
| 95 | Teflon Tape | Teflon Tape IS 14643-1999 | 480 | nos | epo@17er | 150 | |
| 96 | 110 x 110mm CP Nahani trap with jali | 110 x 110mm CP Nahani trap with jali IS 14735 -1999 (Reaffirmed 2021) | 480 | nos | epo@17er | 150 | |
| 97 | PVC SWR floor traps 75mm bore and jointing to waste pipe in solvent cement with CP grating. | PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith CP grating . | 480 | nos | epo@17er | 150 | |
| 98 | 75mm bore PVC SWR soil, waste and vent pipe, in any length, with rubber joints | 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall as per IS 13592-2013 | 1,200 | rm | epo@17er | 150 | |
| 99 | 110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to wall and floor | 110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to wallsperfloor complete all as specified and directed as per IS 13592-2013 | 1,200 | rm | epo@17er | 150 | |
| 100 | 75mm or 110mm PVC SWR reducer complete | 75mm per110mm PVC (SWR) reducer complete all as specified as per IS 14735 -1999 | 400 | nos | epo@17er | 150 | |
| 101 | 110mm PVC SWR junction single, Single T equal or unequal complete | 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified as per IS 14735 -1999 | 640 | nos | epo@17er | 150 | |
| 102 | PVC SWR bend any radius 110mm bore as per IS 10124 Part 9 or 10 of 2009 | PVC (SWR) bend any radius 110mm bore complete all as specified and directed as per IS 10124 (Part 9 or 10) -2009 | 640 | nos | epo@17er | 150 | |
| 103 | 75mm PVC SWR vent cowl complete | 75mm PVC (SWR) vent cowl complete all as specified as per IS 13592-2013 | 320 | nos | epo@17er | 150 | |
| 104 | PPR gate valves, with iron wheel head, screwed both end | PPR gate valves, with iron wheel head, screwed both end for PPR pipe and fixed to 20 mm bore PPR Pipe complette all as specified and as directed. | 160 | nos | epo@17er | 150 | |
| 105 | Anaerobic Advance Septic Tank. | Anaerobic Advance Septic Tank. Supply of PWTs Service Polyethylene Tank (Advance Version Septic Tank) with capacity of 1500 ltr diameter of 1300mm and height of 1400mm. Drawing and Features as per Appx B confirming on IS 2470 (Part-1 and 2)- 1985 (Reaffirmed 2017) . | 80 | nos | epo@17er | 150 | |
| 106 | Store for Anaerobic Advance Septic Tank as per list attached as Annexure 1 | Store for Anaerobic Advance Septic Tank as per list attached as Annexure 1 | 80 | set | epo@17er | 150 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
Copy of PAN Card
2
Copy of GSTIN
3
Copy of Cancelled Cheque
4
Copy of EFT Mandate certified by Bank
5
Data Sheet of offered product(s)
6
Non-Disclosure Declaration on bidder letter head
7
Evidence of 3 years’ regular supply of same/similar category products to Central/State Govt/PSU
8
GST compliance documents and related tax receipts
9
OEM authorization or reseller agreements if applicable
Corrigendum Updates
1 Update
#1
06-Jun-2026 Update
Frequently Asked Questions
Key insights about JAMMU AND KASHMIR tender market
How to bid in Indian Army goods supply tender in Budgam 2026
Bidders must meet eligibility: no liquidation, provide 3 years govt/PSU supply experience, and submit PAN, GSTIN, cancelled cheque, EFT mandate, and a detailed Data Sheet. Include NDA and data-sheet alignment evidence; ensure EMD of ₹486,700 accompanies the bid. Follow GEM portal submission steps.
What documents are required for this Army procurement tender in Budgam
Submit PAN Card, GSTIN, Cancelled Cheque, EFT Mandate, NDA, Data Sheet matching offered goods, and evidence of 3 years govt/PSU supply experience. Include copies of relevant contracts and performance records to demonstrate prior similar work.
What are the technical specifications for data sheet alignment in this bid
The Data Sheet must fully align with offered products; any mismatch can cause rejection. Ensure product names, model numbers, capacities, and compliance details are consistent with the tender’s scope and the items listed in the 106- item BOQ.
What is the EMD amount and its payment terms for this procurement
The EMD amount is ₹486,700. Submit via acceptable security deposit methods on GEM. The tender allows this EMD to support bid validity; ensure payment proof accompanies the bid package and is refundable as per government norms.
What delivery considerations exist for hazardous materials in this Army tender
Hazardous items require MSDS, clear batch numbers, manufacturing dates, gross/net weights, shelf life, and hazard labels on packaging. Transportation and storage must comply with applicable safety regulations; bidders should provide handling procedures in the bid.
What is the quantity variation clause in this Army supply tender
The purchaser reserves the right to increase or decrease the bid quantity by up to 50% at contract placement. Bid pricing should accommodate potential fluctuations; plan inventory and logistics accordingly.
What standards or certifications are mandatory for this procurement
No specific standard is listed in the data; bidders must ensure GST compliance, data-sheet accuracy, NDA compliance, and stable OEM relationships. Demonstrate prior govt/PSU experience and supply of non-obsolete items with at least 5 years remaining life.
Similar Tenders
5 found
Urgent
Indian Army Goods Supply Tender Budgam Jammu & Kashmir 2026 - EMD ₹3.5 Lakh, 3+ Years Experience Required
Indian Army
📍 BUDGAM, JAMMU & KASHMIR
EMD: ₹3.5 L
⏰ Deadline: 5 days left
🛒 Type: Goods
View
GEM
Urgent
PLYWOOD BWR 12-13MM x 7PLY x 1.2 x 1.2M
Munitions India Limited
📍 JABALPUR, MADHYA PRADESH
EMD: ₹2.6 L
⏰ Deadline: 5 days left
🛒 Type: Goods
View
GEM
Commercial oblique MR Plywood IS 303 grade 8ft X 4ft X 4 mm,Commercial oblique MR Plywood IS 303 gr
Border Road Organisation
📍 PUNE, MAHARASHTRA
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Urgent
1_Crane wire rope 1by 2 inch _140000156,2_ROPE 5 by 8inch DYFORM STl_ 140003886,3_ROPE 9 by 16 inch
Oil And Natural Gas Corporation Limited
EMD: ₹43,000
⏰ Deadline: 1 day left
🛒 Type: Goods
View
GEM
Urgent
Rashtriya Ispat Nigam Limited rope ASB 30MMX16.3M tender Visakhapatnam Andhra Pradesh 2026
Rashtriya Ispat Nigam Limited
📍 VISAKHAPATNAM, ANDHRA PRADESH
⏰ Deadline: 3 days left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 5
GeM-Bidding-9429784.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS