Closed GEM

Contract Bidding Open For Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in VISAKHAPATNAM, ANDHRA PRADESH

Bid Publish Date

21-Aug-2026, 6:01 pm

Bid End Date

31-Aug-2026, 7:00 pm

EMD

₹1,02,000

Location

VISAKHAPATNAM , ANDHRA PRADESH

WhatsApp Generate Docs

Progress

Issue21-Aug-2026, 6:01 pm

Reverse Auction03-Sep-2026, 2:00 pm

AwardPending

Indian Army invites bids for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Bathroom Water Shower (V2) (Q3), Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), Stainless Steel Shelf Rack (Q3), Towel Ring (Q3), Towel Rail (Q3), Soap Dish - Case (Q4), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), Flexible Drain Hoses for Wash Basins/ Sinks (Q3), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Floor Drain Traps (V2) (Q3), Insulation foam tube type for AC copper pipe 5 by 8 inch, Insulation foam tube type for AC copper pipe 3 by 8 inch, Insulation foam tube type for AC copper pipe 1 by 2 inch, Insulation foam tube type for AC copper pipe 1 by 4 inch, Copper Cable two core 2 point 5 sqmm, Piano type Switch Socket combination 15 by 16 Amps with box, Copper Cable 2 core 1 point 5 sq mm, Coper Cable 3 core 1 point 5 sq mm, Capacitor 2 point 5 MFD, Copper Cable 3 core 2 point 5 sqmm, Capacitor 55 MFD pin type for Air conditioner, Piano type Switch socket combination 5 by 6 Amps with box, Capacitor 45 MFD pin type for Air conditioner, Switch socket combination 15 by 16 Amps multi pin type, LED Motion sensor tube light 10 OR 12 W, PVC conduit 25 mm heavy duty 3mtr each conduit, Switch socket combination 5 by 6 Amps multi Piano type, Plug and Socket Board with MCB 20A and plug top metal body, LED Tube light fittings 36 W, PVC conduit 20 mm heavy duty 3 mtr each conduit, Battery AAA size For AC remotes, White flexible pipe 20 mm, Heating element 2000 watt, Drain pipe 20 mm for AC 3 mtr roll, Capacitor 4 MFD, Modular switch 5 by 6 Amps one way one module, MCB DB TPN 8 Ways, Fan canopy suitable for ceiling fans, Capacitor 6 MFD pin typr, Modular switch 10 Amps one way, Self Adhesive Tape For Air Conditioner 20 Meters Length 48 mm width, Casing and caping PVC 20 mm medium grade, Capacitor 4 MFD pin type, Thermostat for Geyser, Modular switch 15 by 16 Amps one module, Casing and caping PVC 25 mm medium grade, Brass flare nut 1 by 4 inch for Air Conditioner, Brass flare nut 5 by 8 inch for Air Conditioner, Modular socket 5 by 6 Amps 2 module in VISAKHAPATNAM, ANDHRA PRADESH. Quantity: 5302. Submission Deadline: 31-08-2026 19: 00: 00. Submit your proposal before the deadline.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Reverse Auction Schedule

Completed

Start

03-Sep-2026, 2:00 pm

End

04-Sep-2026, 2:00 pm

Duration: 24 hours

Reverse Auction Document

✅ RA concluded. Check financial results for final rankings.

Tender Data

Bid Details

Quantity

5302

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

Past Performance

80 %

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Bathroom Water Shower (V2) (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Stainless Steel Shelf Rack (Q3) , Towel Ring (Q3) , Towel Rail (Q3) , Soap Dish - Case (Q4) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Floor Drain Traps (V2) (Q3) , Insulation foam tube type for AC copper pipe 5 by 8 inch , Insulation foam tube type for AC copper pipe 3 by 8 inch , Insulation foam tube type for AC copper pipe 1 by 2 inch , Insulation foam tube type for AC copper pipe 1 by 4 inch , Copper Cable two core 2 point 5 sqmm , Piano type Switch Socket combination 15 by 16 Amps with box , Copper Cable 2 core 1 point 5 sq mm , Coper Cable 3 core 1 point 5 sq mm , Capacitor 2 point 5 MFD , Copper Cable 3 core 2 point 5 sqmm , Capacitor 55 MFD pin type for Air conditioner , Piano type Switch socket combination 5 by 6 Amps with box , Capacitor 45 MFD pin type for Air conditioner , Switch socket combination 15 by 16 Amps multi pin type , LED Motion sensor tube light 10 OR 12 W , PVC conduit 25 mm heavy duty 3mtr each conduit , Switch socket combination 5 by 6 Amps multi Piano type , Plug and Socket Board with MCB 20A and plug top metal body , LED Tube light fittings 36 W , PVC conduit 20 mm heavy duty 3 mtr each conduit , Battery AAA size For AC remotes , White flexible pipe 20 mm , Heating element 2000 watt , Drain pipe 20 mm for AC 3 mtr roll , Capacitor 4 MFD , Modular switch 5 by 6 Amps one way one module , MCB DB TPN 8 Ways , Fan canopy suitable for ceiling fans , Capacitor 6 MFD pin typr , Modular switch 10 Amps one way , Self Adhesive Tape For Air Conditioner 20 Meters Length 48 mm width , Casing and caping PVC 20 mm medium grade , Capacitor 4 MFD pin type , Thermostat for Geyser , Modular switch 15 by 16 Amps one module , Casing and caping PVC 25 mm medium grade , Brass flare nut 1 by 4 inch for Air Conditioner , Brass flare nut 5 by 8 inch for Air Conditioner , Modular socket 5 by 6 Amps 2 module

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Visakhapatnam

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Visakhapatnam	Visakhapatnam	-	-	66	30	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 42

GeM-Bidding-9748346.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 39 Items Sign in to view GEM price trends Sign in for GEM prices

Insulation foam tube type for AC copper pipe 5 by 8 inch

17 mtr Delivery: 30 days

Insulation foam tube type for AC copper pipe 3 by 8 inch

17 mtr Delivery: 30 days

Insulation foam tube type for AC copper pipe 1 by 2 inch

17 mtr Delivery: 30 days

Insulation foam tube type for AC copper pipe 1 by 4 inch

17 mtr Delivery: 30 days

Copper Cable two core 2 point 5 sqmm

9 coil Delivery: 30 days

Piano type Switch Socket combination 15 by 16 Amps with box

155 nos Delivery: 30 days

Copper Cable 2 core 1 point 5 sq mm

7 coil Delivery: 30 days

Coper Cable 3 core 1 point 5 sq mm

6 coil Delivery: 30 days

Capacitor 2 point 5 MFD

256 nos Delivery: 30 days

#10

Copper Cable 3 core 2 point 5 sqmm

6 coil Delivery: 30 days

#11

Capacitor 55 MFD pin type for Air conditioner

33 nos Delivery: 30 days

#12

Piano type Switch socket combination 5 by 6 Amps with box

165 nos Delivery: 30 days

#13

Capacitor 45 MFD pin type for Air conditioner

66 nos Delivery: 30 days

#14

Switch socket combination 15 by 16 Amps multi pin type

132 nos Delivery: 30 days

#15

LED Motion sensor tube light 10 OR 12 W

11 nos Delivery: 30 days

#16

PVC conduit 25 mm heavy duty 3mtr each conduit

154 nos Delivery: 30 days

#17

Switch socket combination 5 by 6 Amps multi Piano type

214 nos Delivery: 30 days

#18

Plug and Socket Board with MCB 20A and plug top metal body

20 nos Delivery: 30 days

#19

LED Tube light fittings 36 W

35 nos Delivery: 30 days

#20

PVC conduit 20 mm heavy duty 3 mtr each conduit

152 nos Delivery: 30 days

#21

Battery AAA size For AC remotes

198 nos Delivery: 30 days

#22

White flexible pipe 20 mm

396 rm Delivery: 30 days

#23

Heating element 2000 watt

8 nos Delivery: 30 days

#24

Drain pipe 20 mm for AC 3 mtr roll

66 nos Delivery: 30 days

#25

Capacitor 4 MFD

66 nos Delivery: 30 days

#26

Modular switch 5 by 6 Amps one way one module

50 nos Delivery: 30 days

#27

MCB DB TPN 8 Ways

2 nos Delivery: 30 days

#28

Fan canopy suitable for ceiling fans

33 pairs Delivery: 30 days

#29

Capacitor 6 MFD pin typr

66 nos Delivery: 30 days

#30

Modular switch 10 Amps one way

28 nos Delivery: 30 days

#31

Self Adhesive Tape For Air Conditioner 20 Meters Length 48 mm width

66 nos Delivery: 30 days

#32

Casing and caping PVC 20 mm medium grade

94 rm Delivery: 30 days

#33

Capacitor 4 MFD pin type

66 nos Delivery: 30 days

#34

Thermostat for Geyser

5 nos Delivery: 30 days

#35

Modular switch 15 by 16 Amps one module

27 nos Delivery: 30 days

#36

Casing and caping PVC 25 mm medium grade

51 rm Delivery: 30 days

#37

Brass flare nut 1 by 4 inch for Air Conditioner

79 nos Delivery: 30 days

#38

Brass flare nut 5 by 8 inch for Air Conditioner

26 nos Delivery: 30 days

#39

Modular socket 5 by 6 Amps 2 module

24 nos Delivery: 30 days

Item #	Title	Description	Quantity	Unit	Consignee	Delivery (Days)
1	Insulation foam tube type for AC copper pipe 5 by 8 inch	Insulation foam tube type for AC copper pipe 5 by 8 inch	17	mtr	nd@consignee	30
2	Insulation foam tube type for AC copper pipe 3 by 8 inch	Insulation foam tube type for AC copper pipe 3 by 8 inch	17	mtr	nd@consignee	30
3	Insulation foam tube type for AC copper pipe 1 by 2 inch	Insulation foam tube type for AC copper pipe 1 by 2 inch	17	mtr	nd@consignee	30
4	Insulation foam tube type for AC copper pipe 1 by 4 inch	Insulation foam tube type for AC copper pipe 1 by 4 inch	17	mtr	nd@consignee	30
5	Copper Cable two core 2 point 5 sqmm	Copper Cable two core 2 point 5 sqmm	9	coil	nd@consignee	30
6	Piano type Switch Socket combination 15 by 16 Amps with box	Piano type Switch Socket combination 15 by 16 Amps with box	155	nos	nd@consignee	30
7	Copper Cable 2 core 1 point 5 sq mm	Copper Cable 2 core 1 point 5 sq mm	7	coil	nd@consignee	30
8	Coper Cable 3 core 1 point 5 sq mm	Coper Cable 3 core 1 point 5 sq mm	6	coil	nd@consignee	30
9	Capacitor 2 point 5 MFD	Capacitor 2 point 5 MFD	256	nos	nd@consignee	30
10	Copper Cable 3 core 2 point 5 sqmm	Copper Cable 3 core 2 point 5 sqmm	6	coil	nd@consignee	30
11	Capacitor 55 MFD pin type for Air conditioner	Capacitor 55 MFD pin type for Air conditioner	33	nos	nd@consignee	30
12	Piano type Switch socket combination 5 by 6 Amps with box	Piano type Switch socket combination 5 by 6 Amps with box	165	nos	nd@consignee	30
13	Capacitor 45 MFD pin type for Air conditioner	Capacitor 45 MFD pin type for Air conditioner	66	nos	nd@consignee	30
14	Switch socket combination 15 by 16 Amps multi pin type	Switch socket combination 15 by 16 Amps multi pin type	132	nos	nd@consignee	30
15	LED Motion sensor tube light 10 OR 12 W	LED Motion sensor tube light 10 OR 12 W	11	nos	nd@consignee	30
16	PVC conduit 25 mm heavy duty 3mtr each conduit	PVC conduit 25 mm heavy duty 3mtr each conduit	154	nos	nd@consignee	30
17	Switch socket combination 5 by 6 Amps multi Piano type	Switch socket combination 5 by 6 Amps multi Piano type	214	nos	nd@consignee	30
18	Plug and Socket Board with MCB 20A and plug top metal body	Plug and Socket Board with MCB 20A and plug top metal body	20	nos	nd@consignee	30
19	LED Tube light fittings 36 W	LED Tube light fittings 36 W	35	nos	nd@consignee	30
20	PVC conduit 20 mm heavy duty 3 mtr each conduit	PVC conduit 20 mm heavy duty 3 mtr each conduit	152	nos	nd@consignee	30
21	Battery AAA size For AC remotes	Battery AAA size For AC remotes	198	nos	nd@consignee	30
22	White flexible pipe 20 mm	White flexible pipe 20 mm	396	rm	nd@consignee	30
23	Heating element 2000 watt	Heating element 2000 watt	8	nos	nd@consignee	30
24	Drain pipe 20 mm for AC 3 mtr roll	Drain pipe 20 mm for AC 3 mtr roll	66	nos	nd@consignee	30
25	Capacitor 4 MFD	Capacitor 4 MFD	66	nos	nd@consignee	30
26	Modular switch 5 by 6 Amps one way one module	Modular switch 5 by 6 Amps one way one module	50	nos	nd@consignee	30
27	MCB DB TPN 8 Ways	MCB DB TPN 8 Ways	2	nos	nd@consignee	30
28	Fan canopy suitable for ceiling fans	Fan canopy suitable for ceiling fans	33	pairs	nd@consignee	30
29	Capacitor 6 MFD pin typr	Capacitor 6 MFD pin typr	66	nos	nd@consignee	30
30	Modular switch 10 Amps one way	Modular switch 10 Amps one way	28	nos	nd@consignee	30
31	Self Adhesive Tape For Air Conditioner 20 Meters Length 48 mm width	Self Adhesive Tape For Air Conditioner 20 Meters Length 48 mm width	66	nos	nd@consignee	30
32	Casing and caping PVC 20 mm medium grade	Casing and caping PVC 20 mm medium grade	94	rm	nd@consignee	30
33	Capacitor 4 MFD pin type	Capacitor 4 MFD pin type	66	nos	nd@consignee	30
34	Thermostat for Geyser	Thermostat for Geyser	5	nos	nd@consignee	30
35	Modular switch 15 by 16 Amps one module	Modular switch 15 by 16 Amps one module	27	nos	nd@consignee	30
36	Casing and caping PVC 25 mm medium grade	Casing and caping PVC 25 mm medium grade	51	rm	nd@consignee	30
37	Brass flare nut 1 by 4 inch for Air Conditioner	Brass flare nut 1 by 4 inch for Air Conditioner	79	nos	nd@consignee	30
38	Brass flare nut 5 by 8 inch for Air Conditioner	Brass flare nut 5 by 8 inch for Air Conditioner	26	nos	nd@consignee	30
39	Modular socket 5 by 6 Amps 2 module	Modular socket 5 by 6 Amps 2 module	24	nos	nd@consignee	30

Categories 81

COPPER WIRE FLUID MECHANICS EQUIPMENT TUBE LIGHT ADHESIVE TAPE AIR CONDITIONER SERVICES FITMENT SLUICE VALVE ANGLE GLUCOMETER FALL PROTECTION LANYARD BATHROOM SET BARITONE HORNS MISCELLANEOUS VALVE COPPER COIL ANGLE GLOBE VALVES RING COPPER CABLE VALVES ALLOY POWER CABLE ELECTRICAL CONDENSER GATE VALVES SANITARY WARE CABBING EQUIPMENTS TUBE TOWEL AIR COOLED ENGINE ELECTRICAL PRODUCTS SENSOR BOX VALVE WIRING ASSEMBLY SANITARY FITTING TAPE SUPPLY WATER SUPPLY MATERIAL NON FERROUS PIPE AMPS ARC VALVE GEYSER COMMUNICATION PROTOCOL FERROUS ALLOY SUPPLY ADHESIVE SLIDER VALVES DISCRETE COMPONENTS MODULAR SWITCH ELECTRICAL WIRE PLUMBER BLOCK XLPE CABLE CABLE DUCT HEATING EQUIPMENT SPARES DRESSING MATERIAL BARE CABLE COPPER ALLOY TRANSITION METALS BOILER MOUNTING VALVE CABLE MUSICAL INSTRUMENT PARTS AND ACCESSORIES WATER TRANSMISSION ELECTRICAL?CONDUIT PLASTIC COPPER SHEET BATTERY VALVE PARTS AND ACCESSORIES WATER COOLED ENGINE CANOPY FLEXIBLE PIPE CAPACITOR SOCKET BOILER VALVE BUS TERMINAL PEB PIPES TEA KETTLE UPVC PIPE FAN HIGH TENSION PANEL LED LUMINARIES HYDRAULIC BRAKE COPPER PIPE SWITCH GEAR

Technical Specifications 38 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #2 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Brass rods
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #3 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #4 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #5 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Forged brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	24

Item #6 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Brass rods
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #7 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Stop valve with external thread
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #8 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Stop valve with external thread
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #9 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Concealed stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #10 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #11 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #12 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Single lever wall mounted sink mixture with swivel spout
Type	Dimension	As per table 13 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #13 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	ABS
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	450 x 80mm
Dimensions	Overall length of Hand Shower (in mm)	200
Dimensions	Length of Hand Shower Tube (in mt)	1.5
Dimensions	Diameter of Hand Shower Tube (in mm)	8
Dimensions	Material of Hand Shower Tube	PVC
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	1

Item #14 Details

View Catalog

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl without drainer
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	No

Item #15 Details

View Catalog

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	Yes

Item #16 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Material for Overflow Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Item #17 Details

View Catalog

Category	Specification	Requirement
GENERIC	Configuration	With 3-Shelf (including top shelf)
GENERIC	Shape of support structure	Angle post
GENERIC	Ground clearance (mm)	35 mm
GENERIC	Mode of supply	Assembled Ready To Use
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 202 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 202 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 30 mm
WARRANTY	Warranty period	2 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	Yes

Item #18 Details

View Catalog

Category	Specification	Requirement
GENERIC	Configuration	With 4-Shelf (including top shelf)
GENERIC	Shape of support structure	Round hollow type
GENERIC	Ground clearance (mm)	25 mm
GENERIC	Mode of supply	Knocked Down To Be Assembled At Consignee Site By Consignee Himself
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 30 mm
WARRANTY	Warranty period	1 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	Yes

Item #19 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	130x 120 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Item #20 Details

View Catalog

Category	Specification	Requirement
Generic	Ring Shape	Circular
Material & Dimensions	Ring Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	160 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	6 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	50 mm
Material & Dimensions	Mounting Plate Size (in mm)	40 mm
Design & Configuration	Ring Movement Type	Fixed Ring
Load & Performance	Recommended Load Capacity (in kg)	Up to 2 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #21 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Flat
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #22 Details

View Catalog

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	NOT APPLICABLE
Lid Details	Lid type (according to fixation)	WITHOUT LID

Item #23 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	50 mm for sink
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	3

Item #24 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	5

Item #25 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Dimensions	Nominal Bore of Hose (in mm)	50 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1.5 meter
Dimensions	Wall Thickness (in mm)	1.5 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	No
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	NA
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	NA
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	NA

Item #26 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1.5 meter
Dimensions	Wall Thickness (in mm)	1.5 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	No
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	NA
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	NA
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	NA

Item #27 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Item #28 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Pillar Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Bonnet of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Spindle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Handle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Pillar Taps (As per Table 4 of IS 9763)

Item #29 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PVC (conforming to 9766)
Materials	Material of Bonnet of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Spindle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Handle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Seal of Tap/ Valve	Nitrile PVC
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Item #30 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Stop Valve
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Bonnet of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Spindle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Handle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Stop Valves (As per Table 5 of IS 9763)

Item #31 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #32 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet renewable seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #33 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #34 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Stainless Steel (Corrugated)
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Brass
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	No
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #35 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Stainless Steel (Corrugated)
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm, 600 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Brass, Stainless Steel
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	No
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #36 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel, PVC
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	Yes, No
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	Yes, No
Dimensions	Overall Size (Length x Breadth x Height) in mm	100 mm x 100 mm x 100 mm, 150 mm x 150 mm x 100 mm
Performance	Flow Rate Capacity	Medium Duty, Heavy Duty

Item #37 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	Yes
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	150 mm x 150 mm x 100 mm
Performance	Flow Rate Capacity	Heavy Duty

Item #38 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel
Design & Construction	Trap Seal Depth (in mm)	50 mm
Design & Construction	Removable Grating	Yes
Design & Construction	Anti-Insect Feature	Yes
Design & Construction	Anti-Odor Feature	Yes
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	125 mm x 125 mm x 90 mm
Performance	Flow Rate Capacity	Heavy Duty

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

ANDHRA PRADESH State tenders

VISAKHAPATNAM , ANDHRA PRADESH City tenders

Categories 4 available

COPPER WIRE

FLUID MECHANICS EQUIPMENT

TUBE LIGHT

ADHESIVE TAPE

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Contract Bidding Open For Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in VISAKHAPATNAM, ANDHRA PRADESH

Authority & Contact

Reverse Auction Schedule

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 42

GeM-Bidding-9748346.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

BOQ Document

BOQ Document

GEM General Terms and Conditions Document

Bill of Quantities (BOQ) 39 Items Sign in to view GEM price trends Sign in for GEM prices

Categories 81

Technical Specifications 38 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details