Contract Bidding Open For Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778,Waste Fittings for Washbas in CHENNAI, TAMIL NADU
Bid Publish Date
16-Oct-2026, 4:12 pm
Bid End Date
26-Oct-2026, 5:00 pm
EMD
₹1,16,000
Location
Progress
A tender has been published for Indian Army Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Floor Drain Traps (V2) (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Bathroom Water Shower (V2) (Q3), Wire Mesh, Decorative Curtain Rod, Soap Dish, Handle Door SS, Bow handle, Stopper For Door, SS Hasp and Staple, Aldrop Bolt, PLB 18mm thick, Ply OST, Bleaching Powder, Organic hydrotreated light petroleum distillates, Epoxy green putty, Lock MS for Almirah, Pad Lock MS, Gas Lift for Chair, Twin Casters, TW Beading, HPL Sheet, PU Foam, Sand Paper, PVC Beading, Glass Pane, SS Knob, Stainless steel Magnetic door catcher, Wooden Fluted Dowel Pins, MS helical spring door closer, Ply 06mm thick, MS Nails, MS Panel Pins, CP Handle for Almirah, SWR Pipe, CPVC pipe, CPVC Fitting, UPVC Fitting in CHENNAI, TAMIL NADU. Quantity: 9599 by. Submission Deadline: 26-10-2026 17: 00: 00. Check eligibility and apply.
Tender Data
Bid Details
Quantity
9599
Category
HPL Sheet
Bid Type
Two Packet Bid
Bid Validity
30 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Past Performance
80 %
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3) , Floor Drain Traps (V2) (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Bathroom Water Shower (V2) (Q3) , Wire Mesh , Decorative Curtain Rod , Soap Dish , Handle Door SS , Bow handle , Stopper For Door , SS Hasp and Staple , Aldrop Bolt , PLB 18mm thick , Ply OST , Bleaching Powder , Organic hydrotreated light petroleum distillates , Epoxy green putty , Lock MS for Almirah , Pad Lock MS , Gas Lift for Chair , Twin Casters , TW Beading , HPL Sheet , PU Foam , Sand Paper , PVC Beading , Glass Pane , SS Knob , Stainless steel Magnetic door catcher , Wooden Fluted Dowel Pins , MS helical spring door closer , Ply 06mm thick , MS Nails , MS Panel Pins , CP Handle for Almirah , SWR Pipe , CPVC pipe , CPVC Fitting , UPVC Fitting
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
6
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Tirunelveli
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Tirunelveli | Tirunelveli | - | - | 7 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9987785.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
79 Items Sign in to view GEM price trends Sign in for GEM prices
Wire Mesh
Galvanised Iron Wire mesh 0.56mmx1.18mm, wide 1.20 mtr roll
Decorative Curtain Rod
Decorative Curtain Rods 20mm Stainless Steel in 12 feet length
Decorative Curtain Rod
Decorative Curtain Rods 25mm Stainless Steel in 4 feet length
Decorative Curtain Rod
SS Curtain rod brackets 25mm
Decorative Curtain Rod
Decorative Poweder Coated Aluminium Bracket for Curtain Rod of size 20mm diameter
Soap Dish
Stainless Steel Soap Dish Holder open type
Soap Dish
Stainless Steel Soap Dish Holder open type
Soap Dish
Stainless Steel Soap Dish Holder open type
Handle Door SS
Stainless Steel handle 75mm as per IS-208 Grade 304
Handle Door SS
Stainless Steel handle 100mm as per IS-208 Grade 304
Handle Door SS
Stainless Steel handle 125mm as per IS-208 Grade 304
Bow handle
Bow handle aluminium 100mm
Bow handle
Bow handle aluminium 150mm
Bow handle
Bow handle Stainless Steel 100mm
Bow handle
Bow handle Stainless Steel 150mm
Stopper For Door
Door Stopper 125/150 mm Stainless Steel
Stopper For Door
Door Stopper 125/150 mm Stainless Steel
SS Hasp and Staple
Stainless Steel Hasp & Staple 100mm size
Aldrop Bolt
Sliding door bolt Stainless Steel 300mm as per IS-204, Barrel13mm & Bolt 12mm
PLB 18mm thick
Prealminated particle board 2400x1800x18mm one side teak face and other side white as per IS-12823, Exterior Grade, Grade-I Type-II
Ply OST
Ply wood one side teak face 2440 x 1220 x 09mm Conforming of ISI-1328,
Bleaching Powder
Bleaching Powde conforming to IS 1065 (Part 2) of Type 1r Each bag 25 Kgs
Organic hydrotreated light petroleum distillates
Organic hydrotreated light petroleum distillates, mineral oil, and glycol ether co-solvents 900ml having flash point of 76 degree centigrade, specific gravity 0.85.
Epoxy green putty
Epoxy Green Coloured puytty for metals
Lock MS for Almirah
Lock MS 40mm 6 lever brass with duplicate Keys for Almirah/Table drawer
Pad Lock MS
MS Round Pad Lock with 03 Keys, Size 70mm, 7 Lever
Pad Lock MS
MS Round Pad Lock with 03 Keys, Size 70mm, 7 Lever
Gas Lift for Chair
Hydraulic Gas Lift Cylinder Made with Alloy Steel for Chair Revolving.
Twin Casters
Twin Caster Wheel 50mm heavy duty, injection moulded in black Nylon for executive revolving /Computer chair
TW Beading
Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 15X15mm, 3m long with rounded corners
TW Beading
Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 18X4mm, 3m long with rounded corners
TW Beading
Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 18X6mm, 3m long with rounded corners
TW Beading
Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 25X25mm, 3m long with rounded corners
HPL Sheet
Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets (HPL) matt finish in one side teak veneer shade, 1mm thick size 8 feetx4feet X 1mm thick, conforming to IS 2046
HPL Sheet
Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets (HPL) Glossy/matt finish in white colour, 1mm thick size 8feetx4feet X 1mm thick, conforming to IS 2046
PU Foam
Polyurethene Foam Back or Seat Cusion 100mm thick 40 density Covered with best quality acrylic cloth Stitched with nylon zip on one side as per Military Engineer Services Organisation Furniture Engineering Drawing FD/MAP-II/02 as attached with the bid
Sand Paper
Emery Paper 60 No
PVC Beading
PVC Beading size 18mm X 4mm thick X 12feet long
Glass Pane
Glass pane ordinary transparent sheet size 1800X1200X4mm thick
SS Knob
SS Knob of 25mm dia with screw & nut for cup-board/ Wooden Drawers of Furniure
Stainless steel Magnetic door catcher
Stainless steel Magnetic door catcher of standard sizes and good quality
Wooden Fluted Dowel Pins
Wooden Fluted Dowel Pins Size 2 inch height X6mm dia made of second class hard wood Packet of 100
Wooden Fluted Dowel Pins
Wooden Fluted Dowel Pins Size 3 inch height X6mm dia made of second class hard wood Packet of 100
MS helical spring door closer
MS helical spring door closer at fruit pattern of size 200mm including roller & MS roller plate
Ply 06mm thick
Plywood commercial 7feet x 3feet x 06mm thick as per IS-303, BWR Grade Type-AA
MS Nails
MS Nails 20mm X 15G
MS Nails
MS Nails of size 1 inch X 14G
MS Nails
MS Nails 30mm X 14G
MS Nails
MS MS Nails 40mm X 12G
MS Nails
MS Nails of Size 1-1/2inch X 14G
MS Nails
MS Nails 50mm X 11G
MS Nails
MS Nails of size 2 Inches X 11G
MS Nails
MS Nails of size 2-1/2 Inches X 10G
MS Nails
MS Nail of size 3 Inches X 9G
MS Panel Pins
MS Panel pin Size half inch X 16G
MS Panel Pins
MS Panel pin Size 1 inch X 14G
MS Panel Pins
MS Panel pin Size 1.5 inch X 15G
CP Handle for Almirah
CP Handle for Almirah of size 100mm
SWR Pipe
SWR Pipe 75mm as per IS-13592, ISI Marked in 6m lengths
CPVC pipe
CPVC pipe SDR 11 dia 20mm as per IS-15778, ISI marked in 05m long
CPVC pipe
CPVC pipe SDR 11 dia 25mm as per IS-15778, ISI marked in 05m long
CPVC Fitting
CPVC Coupling 20mm as per IS-15780
CPVC Fitting
CPVC Coupling 25mm as per IS-15780
CPVC Fitting
CPVC Elbow 45 Degrees 20mm as per IS-15780
CPVC Fitting
CPVC Elbow 45 Degrees 25mm as per IS-15780
CPVC Fitting
CPVC Elbow 90 Degrees 20mm as per IS-15780
CPVC Fitting
CPVC Elbow 90 Degrees 25mm as per IS-15780
CPVC Fitting
CPVC End Cap 20mm as per IS-15780
CPVC Fitting
CPVC End Cap 25mm as per IS-15780
CPVC Fitting
CPVC Socket Reducer 20 mm X 15mm as per IS-15780
CPVC Fitting
CPVC Socket Reducer 25 mm X 20mm as per IS-15780
CPVC Fitting
CPVC Tee 20mm as per IS-15780
CPVC Fitting
CPVC Tee 25mm as per IS-15780
CPVC Fitting
CPVC Union 20mm as per IS-15780
CPVC Fitting
CPVC Union 25mm as per IS-15780
UPVC Fitting
UPVC gate valve 20mm, PN16, Grey Coloured conforming to ASTM Standards
UPVC Fitting
UPVC gate valve 25mm, PN16, Grey Coloured conforming to ASTM Standards
UPVC Fitting
UPVC gate valve 32mm, PN16, Grey Coloured conforming to ASTM Standards
UPVC Fitting
UPVC gate valve 50mm, PN16, Grey Coloured conforming to ASTM Standards
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Wire Mesh | Galvanised Iron Wire mesh 0.56mmx1.18mm, wide 1.20 mtr roll | 20 | rm | [email protected] | 30 | |
| 2 | Decorative Curtain Rod | Decorative Curtain Rods 20mm Stainless Steel in 12 feet length | 160 | mtr | [email protected] | 30 | |
| 3 | Decorative Curtain Rod | Decorative Curtain Rods 25mm Stainless Steel in 4 feet length | 17 | mtr | [email protected] | 30 | |
| 4 | Decorative Curtain Rod | SS Curtain rod brackets 25mm | 33 | pairs | [email protected] | 30 | |
| 5 | Decorative Curtain Rod | Decorative Poweder Coated Aluminium Bracket for Curtain Rod of size 20mm diameter | 400 | set | [email protected] | 30 | |
| 6 | Soap Dish | Stainless Steel Soap Dish Holder open type | 120 | each | [email protected] | 30 | |
| 7 | Soap Dish | Stainless Steel Soap Dish Holder open type | 21 | each | [email protected] | 30 | |
| 8 | Soap Dish | Stainless Steel Soap Dish Holder open type | 33 | each | [email protected] | 30 | |
| 9 | Handle Door SS | Stainless Steel handle 75mm as per IS-208 Grade 304 | 80 | box | [email protected] | 30 | |
| 10 | Handle Door SS | Stainless Steel handle 100mm as per IS-208 Grade 304 | 480 | each | [email protected] | 30 | |
| 11 | Handle Door SS | Stainless Steel handle 125mm as per IS-208 Grade 304 | 30 | each | [email protected] | 30 | |
| 12 | Bow handle | Bow handle aluminium 100mm | 80 | each | [email protected] | 30 | |
| 13 | Bow handle | Bow handle aluminium 150mm | 80 | each | [email protected] | 30 | |
| 14 | Bow handle | Bow handle Stainless Steel 100mm | 80 | each | [email protected] | 30 | |
| 15 | Bow handle | Bow handle Stainless Steel 150mm | 80 | each | [email protected] | 30 | |
| 16 | Stopper For Door | Door Stopper 125/150 mm Stainless Steel | 80 | each | [email protected] | 30 | |
| 17 | Stopper For Door | Door Stopper 125/150 mm Stainless Steel | 50 | each | [email protected] | 30 | |
| 18 | SS Hasp and Staple | Stainless Steel Hasp & Staple 100mm size | 48 | box | [email protected] | 30 | |
| 19 | Aldrop Bolt | Sliding door bolt Stainless Steel 300mm as per IS-204, Barrel13mm & Bolt 12mm | 20 | each | [email protected] | 30 | |
| 20 | PLB 18mm thick | Prealminated particle board 2400x1800x18mm one side teak face and other side white as per IS-12823, Exterior Grade, Grade-I Type-II | 13 | each | [email protected] | 30 | |
| 21 | Ply OST | Ply wood one side teak face 2440 x 1220 x 09mm Conforming of ISI-1328, | 120 | each | [email protected] | 30 | |
| 22 | Bleaching Powder | Bleaching Powde conforming to IS 1065 (Part 2) of Type 1r Each bag 25 Kgs | 67 | kgs | [email protected] | 30 | |
| 23 | Organic hydrotreated light petroleum distillates | Organic hydrotreated light petroleum distillates, mineral oil, and glycol ether co-solvents 900ml having flash point of 76 degree centigrade, specific gravity 0.85. | 13 | bottle | [email protected] | 30 | |
| 24 | Epoxy green putty | Epoxy Green Coloured puytty for metals | 40 | kgs | [email protected] | 30 | |
| 25 | Lock MS for Almirah | Lock MS 40mm 6 lever brass with duplicate Keys for Almirah/Table drawer | 240 | each | [email protected] | 30 | |
| 26 | Pad Lock MS | MS Round Pad Lock with 03 Keys, Size 70mm, 7 Lever | 160 | each | [email protected] | 30 | |
| 27 | Pad Lock MS | MS Round Pad Lock with 03 Keys, Size 70mm, 7 Lever | 50 | each | [email protected] | 30 | |
| 28 | Gas Lift for Chair | Hydraulic Gas Lift Cylinder Made with Alloy Steel for Chair Revolving. | 120 | each | [email protected] | 30 | |
| 29 | Twin Casters | Twin Caster Wheel 50mm heavy duty, injection moulded in black Nylon for executive revolving /Computer chair | 480 | each | [email protected] | 30 | |
| 30 | TW Beading | Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 15X15mm, 3m long with rounded corners | 240 | rm | [email protected] | 30 | |
| 31 | TW Beading | Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 18X4mm, 3m long with rounded corners | 240 | each | [email protected] | 30 | |
| 32 | TW Beading | Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 18X6mm, 3m long with rounded corners | 1,600 | rm | [email protected] | 30 | |
| 33 | TW Beading | Beading First class hard wood of specie Tectona Grandis conforming to IS-1331 free from knots and cracks, size 25X25mm, 3m long with rounded corners | 480 | rm | [email protected] | 30 | |
| 34 | HPL Sheet | Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets (HPL) matt finish in one side teak veneer shade, 1mm thick size 8 feetx4feet X 1mm thick, conforming to IS 2046 | 80 | each | [email protected] | 30 | |
| 35 | HPL Sheet | Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets (HPL) Glossy/matt finish in white colour, 1mm thick size 8feetx4feet X 1mm thick, conforming to IS 2046 | 160 | each | [email protected] | 30 | |
| 36 | PU Foam | Polyurethene Foam Back or Seat Cusion 100mm thick 40 density Covered with best quality acrylic cloth Stitched with nylon zip on one side as per Military Engineer Services Organisation Furniture Engineering Drawing FD/MAP-II/02 as attached with the bid | 400 | each | [email protected] | 30 | |
| 37 | Sand Paper | Emery Paper 60 No | 160 | each | [email protected] | 30 | |
| 38 | PVC Beading | PVC Beading size 18mm X 4mm thick X 12feet long | 120 | each | [email protected] | 30 | |
| 39 | Glass Pane | Glass pane ordinary transparent sheet size 1800X1200X4mm thick | 160 | sqm | [email protected] | 30 | |
| 40 | SS Knob | SS Knob of 25mm dia with screw & nut for cup-board/ Wooden Drawers of Furniure | 800 | each | [email protected] | 30 | |
| 41 | Stainless steel Magnetic door catcher | Stainless steel Magnetic door catcher of standard sizes and good quality | 160 | each | [email protected] | 30 | |
| 42 | Wooden Fluted Dowel Pins | Wooden Fluted Dowel Pins Size 2 inch height X6mm dia made of second class hard wood Packet of 100 | 200 | pkt | [email protected] | 30 | |
| 43 | Wooden Fluted Dowel Pins | Wooden Fluted Dowel Pins Size 3 inch height X6mm dia made of second class hard wood Packet of 100 | 200 | pkt | [email protected] | 30 | |
| 44 | MS helical spring door closer | MS helical spring door closer at fruit pattern of size 200mm including roller & MS roller plate | 48 | each | [email protected] | 30 | |
| 45 | Ply 06mm thick | Plywood commercial 7feet x 3feet x 06mm thick as per IS-303, BWR Grade Type-AA | 12 | each | [email protected] | 30 | |
| 46 | MS Nails | MS Nails 20mm X 15G | 8 | kgs | [email protected] | 30 | |
| 47 | MS Nails | MS Nails of size 1 inch X 14G | 8 | kgs | [email protected] | 30 | |
| 48 | MS Nails | MS Nails 30mm X 14G | 8 | kgs | [email protected] | 30 | |
| 49 | MS Nails | MS MS Nails 40mm X 12G | 8 | kgs | [email protected] | 30 | |
| 50 | MS Nails | MS Nails of Size 1-1/2inch X 14G | 8 | kgs | [email protected] | 30 | |
| 51 | MS Nails | MS Nails 50mm X 11G | 8 | kgs | [email protected] | 30 | |
| 52 | MS Nails | MS Nails of size 2 Inches X 11G | 8 | kgs | [email protected] | 30 | |
| 53 | MS Nails | MS Nails of size 2-1/2 Inches X 10G | 8 | kgs | [email protected] | 30 | |
| 54 | MS Nails | MS Nail of size 3 Inches X 9G | 8 | kgs | [email protected] | 30 | |
| 55 | MS Panel Pins | MS Panel pin Size half inch X 16G | 10 | kgs | [email protected] | 30 | |
| 56 | MS Panel Pins | MS Panel pin Size 1 inch X 14G | 10 | kgs | [email protected] | 30 | |
| 57 | MS Panel Pins | MS Panel pin Size 1.5 inch X 15G | 10 | kgs | [email protected] | 30 | |
| 58 | CP Handle for Almirah | CP Handle for Almirah of size 100mm | 128 | each | [email protected] | 30 | |
| 59 | SWR Pipe | SWR Pipe 75mm as per IS-13592, ISI Marked in 6m lengths | 67 | rm | [email protected] | 30 | |
| 60 | CPVC pipe | CPVC pipe SDR 11 dia 20mm as per IS-15778, ISI marked in 05m long | 73 | rm | [email protected] | 30 | |
| 61 | CPVC pipe | CPVC pipe SDR 11 dia 25mm as per IS-15778, ISI marked in 05m long | 42 | rm | [email protected] | 30 | |
| 62 | CPVC Fitting | CPVC Coupling 20mm as per IS-15780 | 13 | each | [email protected] | 30 | |
| 63 | CPVC Fitting | CPVC Coupling 25mm as per IS-15780 | 13 | each | [email protected] | 30 | |
| 64 | CPVC Fitting | CPVC Elbow 45 Degrees 20mm as per IS-15780 | 13 | each | [email protected] | 30 | |
| 65 | CPVC Fitting | CPVC Elbow 45 Degrees 25mm as per IS-15780 | 10 | each | [email protected] | 30 | |
| 66 | CPVC Fitting | CPVC Elbow 90 Degrees 20mm as per IS-15780 | 20 | each | [email protected] | 30 | |
| 67 | CPVC Fitting | CPVC Elbow 90 Degrees 25mm as per IS-15780 | 17 | each | [email protected] | 30 | |
| 68 | CPVC Fitting | CPVC End Cap 20mm as per IS-15780 | 10 | each | [email protected] | 30 | |
| 69 | CPVC Fitting | CPVC End Cap 25mm as per IS-15780 | 10 | each | [email protected] | 30 | |
| 70 | CPVC Fitting | CPVC Socket Reducer 20 mm X 15mm as per IS-15780 | 17 | each | [email protected] | 30 | |
| 71 | CPVC Fitting | CPVC Socket Reducer 25 mm X 20mm as per IS-15780 | 17 | each | [email protected] | 30 | |
| 72 | CPVC Fitting | CPVC Tee 20mm as per IS-15780 | 20 | each | [email protected] | 30 | |
| 73 | CPVC Fitting | CPVC Tee 25mm as per IS-15780 | 10 | each | [email protected] | 30 | |
| 74 | CPVC Fitting | CPVC Union 20mm as per IS-15780 | 13 | each | [email protected] | 30 | |
| 75 | CPVC Fitting | CPVC Union 25mm as per IS-15780 | 13 | each | [email protected] | 30 | |
| 76 | UPVC Fitting | UPVC gate valve 20mm, PN16, Grey Coloured conforming to ASTM Standards | 48 | each | [email protected] | 30 | |
| 77 | UPVC Fitting | UPVC gate valve 25mm, PN16, Grey Coloured conforming to ASTM Standards | 48 | each | [email protected] | 30 | |
| 78 | UPVC Fitting | UPVC gate valve 32mm, PN16, Grey Coloured conforming to ASTM Standards | 48 | each | [email protected] | 30 | |
| 79 | UPVC Fitting | UPVC gate valve 50mm, PN16, Grey Coloured conforming to ASTM Standards | 48 | each | [email protected] | 30 |
Categories
102
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer