Closed GEM

Bids are Invited For Bathroom or Toilet Mirror (V3),Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and U

Bid Publish Date

18-Aug-2026, 11:48 am

Bid End Date

28-Aug-2026, 12:00 pm

EMD

₹17,000

WhatsApp Generate Docs

Progress

Issue18-Aug-2026, 11:48 am

AwardPending

Public procurement opportunity for Indian Army Bathroom or Toilet Mirror (V3) (Q4), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Flexible Drain Hoses for Wash Basins/ Sinks (Q3), Bathroom Water Shower (V2) (Q3), Towel Rail (Q3), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), Floor Drain Traps (V2) (Q3), Soap Dish - Case (Q4), Stainless Steel Shelf Rack (Q3), Ply wood 8FEETx4FEETx12mm thick, Partical board 8FEETx 4FEETx19 mm thick, Plain Glass panes 3 mm thick, Hydraulic door closer Heavy duty RM1000, Alum Tower bolt 150 mm long bolt dia 12mm barrel dia 13mm, Aluminium sliding door bolt 250mm long16mm dia, Aluminium sliding door bolt 300mm long 16mm dia, Screw Steel 50 mm, Screw Steel 25 mm, Screw Steel 75 mm, Alum Butt hinges 125 mm long 4mm thick, GI Nails 40 mm, Alum Butt hinges 100 mm long 4mm thick, Fevicol 1 kg, GI Nails 25mm, Alumn bow handle 125mm Rod dia 12 mm, Alum Tower bolt 100 mm long bolt dia 12mm barrel dia 13mm, Wooden beading of Size 20x6x8feet, Wooden beading for fixing Glass 10X10X6mm, Round plug wooden 25mm, Aluminium door stopper 100mm long with leg, Alum Bow handle 150 mm Rod dia 12 mm, Bracket for curtain rod SS, Haps and Staple 100mm long Aluminium, Hasp and stapple 75mm long SS, GI Nails 50 mm, ss wire mesh 0 point 36 mm dia of wire and width of aperature 1point 40 mm 15 Mtr roll, Putty 1 kg pkt, Alumn sheet 0 point 5 mm thick 1 mtr wide 24G, Super flush strip 100 mm wide 10 mtr long, ss kitchen sink without board size 510x430x203 mm bowl size 430x380x203mm thickness 1mm, PVC float valve 20 mm with rod and ball, Hacksaw blade 25mm x 300mm, CP Stop Cock Male external thread 15 mm, CP grating 100 102mm, PVC Float Valve 15mm with rod and ball, Reducing Tee 25mmx20mm, PVC float valve 25 mm with rod and ball, GI Tee 25 mm, GI Elbow 15 mm, GI Socket 15mm, GI Nipple 15 MM X25 MM, GI Plug 15 mm, CP waste Coupling 32mm, GI Union 20mm, GI Nipple 15 x 100mm, GI Nipple 20 x 80mm, GI Nipple 20 x 150mm, GI Union 15mm, GI Reducing socket 15mm x 20mm, GI Nipple 20 x 50mm, GI Tee 15mm, GI Reducing socket 20 x 25 mm, GI Tee 20 mm, PVC handle for flushing cistern, Tank cover PVC for 1000 ltr capacity with fixing arrangement, Tank cover PVC for 500 ltr capacity with fixing arrangement, M Seal, GI Nipple 25 x 50mm, SS Robe Hook, Brass jumper washer for 15 mm bib tap, GI socket 20mm, GI socket 25mm, GI bend 20mm, GI Nipple 15 x 80mm, GI Hook for pipeline, GI Bend 25 mm, GI Check Nut 20mm, GI Elbow 20mm, White cement 1 Kg, Drill Bit for brick hole 4mm 5mm 6mm 8mm and10mm. Quantity: 3349 issued by. Submission Deadline: 28-08-2026 12: 00: 00. View full details and respond.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Tender Data

Bid Details

Quantity

3349

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Yes

Startup Exemption/Relaxation

Yes

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

OEM Avg. Turnover

Past Performance

50 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Bathroom or Toilet Mirror (V3) (Q4) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Bathroom Water Shower (V2) (Q3) , Towel Rail (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Floor Drain Traps (V2) (Q3) , Soap Dish - Case (Q4) , Stainless Steel Shelf Rack (Q3) , Ply wood 8FEETx4FEETx12mm thick , Partical board 8FEETx 4FEETx19 mm thick , Plain Glass panes 3 mm thick , Hydraulic door closer Heavy duty RM1000 , Alum Tower bolt 150 mm long bolt dia 12mm barrel dia 13mm , Aluminium sliding door bolt 250mm long16mm dia , Aluminium sliding door bolt 300mm long 16mm dia , Screw Steel 50 mm , Screw Steel 25 mm , Screw Steel 75 mm , Alum Butt hinges 125 mm long 4mm thick , GI Nails 40 mm , Alum Butt hinges 100 mm long 4mm thick , Fevicol 1 kg , GI Nails 25mm , Alumn bow handle 125mm Rod dia 12 mm , Alum Tower bolt 100 mm long bolt dia 12mm barrel dia 13mm , Wooden beading of Size 20x6x8feet , Wooden beading for fixing Glass 10X10X6mm , Round plug wooden 25mm , Aluminium door stopper 100mm long with leg , Alum Bow handle 150 mm Rod dia 12 mm , Bracket for curtain rod SS , Haps and Staple 100mm long Aluminium , Hasp and stapple 75mm long SS , GI Nails 50 mm , ss wire mesh 0 point 36 mm dia of wire and width of aperature 1point 40 mm 15 Mtr roll , Putty 1 kg pkt , Alumn sheet 0 point 5 mm thick 1 mtr wide 24G , Super flush strip 100 mm wide 10 mtr long , ss kitchen sink without board size 510x430x203 mm bowl size 430x380x203mm thickness 1mm , PVC float valve 20 mm with rod and ball , Hacksaw blade 25mm x 300mm , CP Stop Cock Male external thread 15 mm , CP grating 100 102mm , PVC Float Valve 15mm with rod and ball , Reducing Tee 25mmx20mm , PVC float valve 25 mm with rod and ball , GI Tee 25 mm , GI Elbow 15 mm , GI Socket 15mm , GI Nipple 15 MM X25 MM , GI Plug 15 mm , CP waste Coupling 32mm , GI Union 20mm , GI Nipple 15 x 100mm , GI Nipple 20 x 80mm , GI Nipple 20 x 150mm , GI Union 15mm , GI Reducing socket 15mm x 20mm , GI Nipple 20 x 50mm , GI Tee 15mm , GI Reducing socket 20 x 25 mm , GI Tee 20 mm , PVC handle for flushing cistern , Tank cover PVC for 1000 ltr capacity with fixing arrangement , Tank cover PVC for 500 ltr capacity with fixing arrangement , M Seal , GI Nipple 25 x 50mm , SS Robe Hook , Brass jumper washer for 15 mm bib tap , GI socket 20mm , GI socket 25mm , GI bend 20mm , GI Nipple 15 x 80mm , GI Hook for pipeline , GI Bend 25 mm , GI Check Nut 20mm , GI Elbow 20mm , White cement 1 Kg , Drill Bit for brick hole 4mm 5mm 6mm 8mm and10mm

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Purnia

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Purnia	Purnia	-	-	2	45	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 39

GeM-Bidding-9723631.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 78 Items Sign in to view GEM price trends Sign in for GEM prices

Ply wood 8FEETx4FEETx12mm thick

2 nos Delivery: 45 days

Partical board 8FEETx 4FEETx19 mm thick

2 nos Delivery: 45 days

Plain Glass panes 3 mm thick

10 sqm Delivery: 45 days

Hydraulic door closer Heavy duty RM1000

4 each Delivery: 45 days

Alum Tower bolt 150 mm long bolt dia 12mm barrel dia 13mm

10 each Delivery: 45 days

Aluminium sliding door bolt 250mm long16mm dia

10 each Delivery: 45 days

Aluminium sliding door bolt 300mm long 16mm dia

10 each Delivery: 45 days

Screw Steel 50 mm

500 gram Delivery: 45 days

Screw Steel 25 mm

500 gram Delivery: 45 days

#10

Screw Steel 75 mm

500 gram Delivery: 45 days

#11

Alum Butt hinges 125 mm long 4mm thick

20 each Delivery: 45 days

#12

GI Nails 40 mm

1 kg Delivery: 45 days

#13

Alum Butt hinges 100 mm long 4mm thick

20 nos Delivery: 45 days

#14

Fevicol 1 kg

1 kg Delivery: 45 days

#15

GI Nails 25mm

500 gram Delivery: 45 days

#16

Alumn bow handle 125mm Rod dia 12 mm

20 each Delivery: 45 days

#17

Alum Tower bolt 100 mm long bolt dia 12mm barrel dia 13mm

20 each Delivery: 45 days

#18

GI Nails 25mm

500 gram Delivery: 45 days

#19

Wooden beading of Size 20x6x8feet

10 rm Delivery: 45 days

#20

Wooden beading for fixing Glass 10X10X6mm

Wooden beading for fixing Glass 10x10x6mm

10 rm Delivery: 45 days

#21

Round plug wooden 25mm

3 each Delivery: 45 days

#22

Aluminium door stopper 100mm long with leg

10 each Delivery: 45 days

#23

Alum Bow handle 150 mm Rod dia 12 mm

10 each Delivery: 45 days

#24

Bracket for curtain rod SS

20 pair Delivery: 45 days

#25

Haps and Staple 100mm long Aluminium

Haps & Staple 100mm long Aluminium

10 each Delivery: 45 days

#26

Hasp and stapple 75mm long SS

10 each Delivery: 45 days

#27

GI Nails 50 mm

3 kg Delivery: 45 days

#28

ss wire mesh 0 point 36 mm dia of wire and width of aperature 1point 40 mm 15 Mtr roll

5 roll Delivery: 45 days

#29

Putty 1 kg pkt

9 kg Delivery: 45 days

#30

Alumn sheet 0 point 5 mm thick 1 mtr wide 24G

1 rm Delivery: 45 days

#31

Super flush strip 100 mm wide 10 mtr long

1 each Delivery: 45 days

#32

ss kitchen sink without board size 510x430x203 mm bowl size 430x380x203mm thickness 1mm

1 nos Delivery: 45 days

#33

PVC float valve 20 mm with rod and ball

PVC float valve 20 mm with rod & ball

12 each Delivery: 45 days

#34

Hacksaw blade 25mm x 300mm

1 each Delivery: 45 days

#35

CP Stop Cock Male external thread 15 mm

10 each Delivery: 45 days

#36

CP grating 100 102mm

10 each Delivery: 45 days

#37

PVC Float Valve 15mm with rod and ball

PVC Float Valve 15mm with rod & ball

10 each Delivery: 45 days

#38

Reducing Tee 25mmx20mm

10 each Delivery: 45 days

#39

PVC float valve 25 mm with rod and ball

PVC float valve 25 mm with rod & ball

5 each Delivery: 45 days

#40

GI Tee 25 mm

10 each Delivery: 45 days

#41

GI Elbow 15 mm

10 each Delivery: 45 days

#42

GI Socket 15mm

10 nos Delivery: 45 days

#43

GI Nipple 15 MM X25 MM

GI Nipple 15 MM x 25 MM

10 nos Delivery: 45 days

#44

GI Plug 15 mm

5 nos Delivery: 45 days

#45

CP waste Coupling 32mm

5 nos Delivery: 45 days

#46

GI Union 20mm

5 nos Delivery: 45 days

#47

GI Nipple 15 x 100mm

5 nos Delivery: 45 days

#48

GI Nipple 20 x 80mm

5 nos Delivery: 45 days

#49

GI Nipple 20 x 150mm

10 nos Delivery: 45 days

#50

GI Union 15mm

5 nos Delivery: 45 days

#51

GI Reducing socket 15mm x 20mm

10 nos Delivery: 45 days

#52

GI Nipple 20 x 50mm

10 nos Delivery: 45 days

#53

GI Tee 15mm

10 nos Delivery: 45 days

#54

GI Reducing socket 20 x 25 mm

10 nos Delivery: 45 days

#55

GI Tee 20 mm

5 nos Delivery: 45 days

#56

CP grating 100 102mm

5 nos Delivery: 45 days

#57

PVC handle for flushing cistern

5 nos Delivery: 45 days

#58

Tank cover PVC for 1000 ltr capacity with fixing arrangement

10 nos Delivery: 45 days

#59

Tank cover PVC for 500 ltr capacity with fixing arrangement

10 nos Delivery: 45 days

#60

M Seal

5 kg Delivery: 45 days

#61

GI Nipple 25 x 50mm

5 nos Delivery: 45 days

#62

SS Robe Hook

5 nos Delivery: 45 days

#63

Brass jumper washer for 15 mm bib tap

20 nos Delivery: 45 days

#64

GI Socket 15mm

10 nos Delivery: 45 days

#65

GI socket 20mm

10 nos Delivery: 45 days

#66

GI socket 25mm

10 nos Delivery: 45 days

#67

GI socket 20mm

5 nos Delivery: 45 days

#68

GI bend 20mm

5 nos Delivery: 45 days

#69

GI Nipple 15 x 80mm

5 nos Delivery: 45 days

#70

GI Nipple 20 x 50mm

5 nos Delivery: 45 days

#71

GI Hook for pipeline

10 nos Delivery: 45 days

#72

GI Bend 25 mm

10 nos Delivery: 45 days

#73

GI Check Nut 20mm

5 nos Delivery: 45 days

#74

GI Elbow 15 mm

5 nos Delivery: 45 days

#75

GI Elbow 20mm

5 nos Delivery: 45 days

#76

GI Reducing socket 20 x 25 mm

5 nos Delivery: 45 days

#77

White cement 1 Kg

12 nos Delivery: 45 days

#78

Drill Bit for brick hole 4mm 5mm 6mm 8mm and10mm

5 nos Delivery: 45 days

Item #	Title	Description	Quantity	Unit	Consignee	Delivery (Days)
1	Ply wood 8FEETx4FEETx12mm thick	Ply wood 8FEETx4FEETx12mm thick	2	nos	akhileshgepur@con	45
2	Partical board 8FEETx 4FEETx19 mm thick	Partical board 8FEETx 4FEETx19 mm thick	2	nos	akhileshgepur@con	45
3	Plain Glass panes 3 mm thick	Plain Glass panes 3 mm thick	10	sqm	akhileshgepur@con	45
4	Hydraulic door closer Heavy duty RM1000	Hydraulic door closer Heavy duty RM1000	4	each	akhileshgepur@con	45
5	Alum Tower bolt 150 mm long bolt dia 12mm barrel dia 13mm	Alum Tower bolt 150 mm long bolt dia 12mm barrel dia 13mm	10	each	akhileshgepur@con	45
6	Aluminium sliding door bolt 250mm long16mm dia	Aluminium sliding door bolt 250mm long16mm dia	10	each	akhileshgepur@con	45
7	Aluminium sliding door bolt 300mm long 16mm dia	Aluminium sliding door bolt 300mm long 16mm dia	10	each	akhileshgepur@con	45
8	Screw Steel 50 mm	Screw Steel 50 mm	500	gram	akhileshgepur@con	45
9	Screw Steel 25 mm	Screw Steel 25 mm	500	gram	akhileshgepur@con	45
10	Screw Steel 75 mm	Screw Steel 75 mm	500	gram	akhileshgepur@con	45
11	Alum Butt hinges 125 mm long 4mm thick	Alum Butt hinges 125 mm long 4mm thick	20	each	akhileshgepur@con	45
12	GI Nails 40 mm	GI Nails 40 mm	1	kg	akhileshgepur@con	45
13	Alum Butt hinges 100 mm long 4mm thick	Alum Butt hinges 100 mm long 4mm thick	20	nos	akhileshgepur@con	45
14	Fevicol 1 kg	Fevicol 1 kg	1	kg	akhileshgepur@con	45
15	GI Nails 25mm	GI Nails 25mm	500	gram	akhileshgepur@con	45
16	Alumn bow handle 125mm Rod dia 12 mm	Alumn bow handle 125mm Rod dia 12 mm	20	each	akhileshgepur@con	45
17	Alum Tower bolt 100 mm long bolt dia 12mm barrel dia 13mm	Alum Tower bolt 100 mm long bolt dia 12mm barrel dia 13mm	20	each	akhileshgepur@con	45
18	GI Nails 25mm	GI Nails 25mm	500	gram	akhileshgepur@con	45
19	Wooden beading of Size 20x6x8feet	Wooden beading of Size 20x6x8feet	10	rm	akhileshgepur@con	45
20	Wooden beading for fixing Glass 10X10X6mm	Wooden beading for fixing Glass 10x10x6mm	10	rm	akhileshgepur@con	45
21	Round plug wooden 25mm	Round plug wooden 25mm	3	each	akhileshgepur@con	45
22	Aluminium door stopper 100mm long with leg	Aluminium door stopper 100mm long with leg	10	each	akhileshgepur@con	45
23	Alum Bow handle 150 mm Rod dia 12 mm	Alum Bow handle 150 mm Rod dia 12 mm	10	each	akhileshgepur@con	45
24	Bracket for curtain rod SS	Bracket for curtain rod SS	20	pair	akhileshgepur@con	45
25	Haps and Staple 100mm long Aluminium	Haps & Staple 100mm long Aluminium	10	each	akhileshgepur@con	45
26	Hasp and stapple 75mm long SS	Hasp and stapple 75mm long SS	10	each	akhileshgepur@con	45
27	GI Nails 50 mm	GI Nails 50 mm	3	kg	akhileshgepur@con	45
28	ss wire mesh 0 point 36 mm dia of wire and width of aperature 1point 40 mm 15 Mtr roll	ss wire mesh 0 point 36 mm dia of wire and width of aperature 1point 40 mm 15 Mtr roll	5	roll	akhileshgepur@con	45
29	Putty 1 kg pkt	Putty 1 kg pkt	9	kg	akhileshgepur@con	45
30	Alumn sheet 0 point 5 mm thick 1 mtr wide 24G	Alumn sheet 0 point 5 mm thick 1 mtr wide 24G	1	rm	akhileshgepur@con	45
31	Super flush strip 100 mm wide 10 mtr long	Super flush strip 100 mm wide 10 mtr long	1	each	akhileshgepur@con	45
32	ss kitchen sink without board size 510x430x203 mm bowl size 430x380x203mm thickness 1mm	ss kitchen sink without board size 510x430x203 mm bowl size 430x380x203mm thickness 1mm	1	nos	akhileshgepur@con	45
33	PVC float valve 20 mm with rod and ball	PVC float valve 20 mm with rod & ball	12	each	akhileshgepur@con	45
34	Hacksaw blade 25mm x 300mm	Hacksaw blade 25mm x 300mm	1	each	akhileshgepur@con	45
35	CP Stop Cock Male external thread 15 mm	CP Stop Cock Male external thread 15 mm	10	each	akhileshgepur@con	45
36	CP grating 100 102mm	CP grating 100 102mm	10	each	akhileshgepur@con	45
37	PVC Float Valve 15mm with rod and ball	PVC Float Valve 15mm with rod & ball	10	each	akhileshgepur@con	45
38	Reducing Tee 25mmx20mm	Reducing Tee 25mmx20mm	10	each	akhileshgepur@con	45
39	PVC float valve 25 mm with rod and ball	PVC float valve 25 mm with rod & ball	5	each	akhileshgepur@con	45
40	GI Tee 25 mm	GI Tee 25 mm	10	each	akhileshgepur@con	45
41	GI Elbow 15 mm	GI Elbow 15 mm	10	each	akhileshgepur@con	45
42	GI Socket 15mm	GI Socket 15mm	10	nos	akhileshgepur@con	45
43	GI Nipple 15 MM X25 MM	GI Nipple 15 MM x 25 MM	10	nos	akhileshgepur@con	45
44	GI Plug 15 mm	GI Plug 15 mm	5	nos	akhileshgepur@con	45
45	CP waste Coupling 32mm	CP waste Coupling 32mm	5	nos	akhileshgepur@con	45
46	GI Union 20mm	GI Union 20mm	5	nos	akhileshgepur@con	45
47	GI Nipple 15 x 100mm	GI Nipple 15 x 100mm	5	nos	akhileshgepur@con	45
48	GI Nipple 20 x 80mm	GI Nipple 20 x 80mm	5	nos	akhileshgepur@con	45
49	GI Nipple 20 x 150mm	GI Nipple 20 x 150mm	10	nos	akhileshgepur@con	45
50	GI Union 15mm	GI Union 15mm	5	nos	akhileshgepur@con	45
51	GI Reducing socket 15mm x 20mm	GI Reducing socket 15mm x 20mm	10	nos	akhileshgepur@con	45
52	GI Nipple 20 x 50mm	GI Nipple 20 x 50mm	10	nos	akhileshgepur@con	45
53	GI Tee 15mm	GI Tee 15mm	10	nos	akhileshgepur@con	45
54	GI Reducing socket 20 x 25 mm	GI Reducing socket 20 x 25 mm	10	nos	akhileshgepur@con	45
55	GI Tee 20 mm	GI Tee 20 mm	5	nos	akhileshgepur@con	45
56	CP grating 100 102mm	CP grating 100 102mm	5	nos	akhileshgepur@con	45
57	PVC handle for flushing cistern	PVC handle for flushing cistern	5	nos	akhileshgepur@con	45
58	Tank cover PVC for 1000 ltr capacity with fixing arrangement	Tank cover PVC for 1000 ltr capacity with fixing arrangement	10	nos	akhileshgepur@con	45
59	Tank cover PVC for 500 ltr capacity with fixing arrangement	Tank cover PVC for 500 ltr capacity with fixing arrangement	10	nos	akhileshgepur@con	45
60	M Seal	M Seal	5	kg	akhileshgepur@con	45
61	GI Nipple 25 x 50mm	GI Nipple 25 x 50mm	5	nos	akhileshgepur@con	45
62	SS Robe Hook	SS Robe Hook	5	nos	akhileshgepur@con	45
63	Brass jumper washer for 15 mm bib tap	Brass jumper washer for 15 mm bib tap	20	nos	akhileshgepur@con	45
64	GI Socket 15mm	GI Socket 15mm	10	nos	akhileshgepur@con	45
65	GI socket 20mm	GI socket 20mm	10	nos	akhileshgepur@con	45
66	GI socket 25mm	GI socket 25mm	10	nos	akhileshgepur@con	45
67	GI socket 20mm	GI socket 20mm	5	nos	akhileshgepur@con	45
68	GI bend 20mm	GI bend 20mm	5	nos	akhileshgepur@con	45
69	GI Nipple 15 x 80mm	GI Nipple 15 x 80mm	5	nos	akhileshgepur@con	45
70	GI Nipple 20 x 50mm	GI Nipple 20 x 50mm	5	nos	akhileshgepur@con	45
71	GI Hook for pipeline	GI Hook for pipeline	10	nos	akhileshgepur@con	45
72	GI Bend 25 mm	GI Bend 25 mm	10	nos	akhileshgepur@con	45
73	GI Check Nut 20mm	GI Check Nut 20mm	5	nos	akhileshgepur@con	45
74	GI Elbow 15 mm	GI Elbow 15 mm	5	nos	akhileshgepur@con	45
75	GI Elbow 20mm	GI Elbow 20mm	5	nos	akhileshgepur@con	45
76	GI Reducing socket 20 x 25 mm	GI Reducing socket 20 x 25 mm	5	nos	akhileshgepur@con	45
77	White cement 1 Kg	White cement 1 Kg	12	nos	akhileshgepur@con	45
78	Drill Bit for brick hole 4mm 5mm 6mm 8mm and10mm	Drill Bit for brick hole 4mm 5mm 6mm 8mm and10mm	5	nos	akhileshgepur@con	45

Categories 74

FLUID MECHANICS EQUIPMENT SPECTROSCOPIC EQUIPMENT WIND MILL ENERGY PROJECT CEMENT SERVICES DOORS FITMENT PLATFORM SCALE SLUICE VALVE ANGLE ANIMAL WATERING MACHINES FALL PROTECTION LANYARD BATHROOM SET AMMONIA ALUM PURE BARITONE HORNS MISCELLANEOUS VALVE PLY WOOD ROTARY DRILL COPPER COIL STEEL DOOR ANGLE GLOBE VALVES SECURITY HARDWARE VALVES ALLOY ALUM NON FERRIC ALUM GATE VALVES SANITARY WARE AIR CYLINDERS GRATING TOWEL DESERT COOLER VALVE SANITARY FITTING WATER SUPPLY MATERIAL WIRE AGRICULTURE EQUIPMENT ARC VALVE HARDWARE AND FASTENERS GEYSER BLADE COMMUNICATION PROTOCOL FERROUS ALLOY SUPPLY SLIDER VALVES STRIP PLUMBER BLOCK MESH ELBOW COPPER ALLOY TRANSITION METALS BOILER MOUNTING VALVE MUSICAL INSTRUMENT PARTS AND ACCESSORIES WATER TRANSMISSION PLASTIC BEEKEEPING EQUIPMENT COPPER SHEET MILITARY VEHICLE VALVE PARTS AND ACCESSORIES FLOAT VALVES STOMACHERS SOCKET BRICK BOILER VALVE DRILL BIT HYDRAULIC PIPES UPVC PIPE BUFFER DOOR BRACKET TEE STRING INSTRUMENTS HYDRAULIC BRAKE WATER STORAGE AND SUPPLY BARREL

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 35 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>10 to ≤12.5
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Item #2 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Material for Overflow Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Item #3 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	Nylon 66 GF
Materials	Material of Bonnet of Tap/ Valve	Nylon 66 (conforming to 13464)
Materials	Material of Spindle of Tap/ Valve	ABS
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Item #4 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	One hole pillar mounted combination tap assembly
Type	Dimension	As per table 7 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #5 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Brass sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Brass rods
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #6 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Forged brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #7 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #8 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #9 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Stop valve with external thread
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #10 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Red Color or Letter H for Hot Water
Materials	Material of Body of Tap/ Valve	ABS
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	ABS
Materials	Material of Handle of Tap/ Valve	ABS
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Item #11 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Stainless Steel
Generic	Frame Color	Silver
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>40 to ≤45
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Item #12 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #13 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	High Tensile Brass (conforming to HT1 or HT2 of IS 320)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #14 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet renewable seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #15 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Dimensions	Nominal Bore of Hose (in mm)	50 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1.5 meter
Dimensions	Wall Thickness (in mm)	1.5 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	No
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	NA
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	NA
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	NA

Item #16 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Rainfall and Multiple flow
Type	Type of Multiple flow	Rainstream
Type	Shape of Shower	Round
Dimensions	Size of Shower	100 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	200
Warranty	Warranty (in Years)	1

Item #17 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Folding Rail
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #18 Details

View Catalog

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polystyrene
Material	Materials of Hinging Device	Bronze or Brass with Nickle Chromium Plating
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 1

Item #19 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	PVC Outer Cover
Dimensions	Nominal Bore Size (in mm)	8 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	600 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	PVC (Polyvinyl Chloride)
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Light Duty

Item #20 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #21 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	No
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	NA
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	NA
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	NA

Item #22 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	CPVC
Material & Construction	Cover Material	PVC Coated Stainless Steel Braid
Dimensions	Nominal Bore Size (in mm)	10 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	PVC (Polyvinyl Chloride)
End Connections & Fittings	Surface Finish	Chrome Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Light Duty

Item #23 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	50 mm for sink
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	3

Item #24 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	130x 120 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Item #25 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Stop Valve
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Red Color or Letter H for Hot Water
Materials	Material of Body of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Stop Valves (As per Table 5 of IS 9763)

Item #26 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Stop Valve
Generic	Nominal Size (in mm)	20 mm (3/4")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Stop Valves (As per Table 5 of IS 9763)

Item #27 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	No
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	No
Dimensions	Overall Size (Length x Breadth x Height) in mm	125 mm x 125 mm x 90 mm
Performance	Flow Rate Capacity	Medium Duty

Item #28 Details

View Catalog

Category	Specification	Requirement
Generic	Material	PVC
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	Yes
Design & Construction	Anti-Insect Feature	Yes
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	125 mm x 125 mm x 90 mm
Performance	Flow Rate Capacity	Medium Duty

Item #29 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	22 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #30 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #31 Details

View Catalog

Category	Specification	Requirement
Material	Material of the box	Tough and durable plastic
Lid Details	Type of Lid	TRANSPARENT
Lid Details	Lid type (according to fixation)	HINGED

Item #32 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Wood
Generic	Frame Color	Brown
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>10 to ≤12.5
Dimensions	Height/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Item #33 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Close Coupled Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Any other Corrosion-resistant Material
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Item #34 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Square
Dimensions	Size of Shower	75 mm
Dimensions	Overall length of Hand Shower (in mm)	200
Dimensions	Length of Hand Shower Tube (in mt)	1
Dimensions	Diameter of Hand Shower Tube (in mm)	8
Dimensions	Material of Hand Shower Tube	Stainless Steel
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	1

Item #35 Details

View Catalog

Category	Specification	Requirement
GENERIC	Configuration	With 3-Shelf (including top shelf)
GENERIC	Shape of support structure	Angle post
GENERIC	Ground clearance (mm)	25 mm
GENERIC	Mode of supply	Assembled Ready To Use
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 35 mm
WARRANTY	Warranty period	1 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	Yes

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

Categories 4 available

FLUID MECHANICS EQUIPMENT

SPECTROSCOPIC EQUIPMENT

WIND MILL ENERGY PROJECT

CEMENT

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Bids are Invited For Bathroom or Toilet Mirror (V3),Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and U

Authority & Contact

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 39

GeM-Bidding-9723631.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

BOQ Document

BOQ Document

GEM General Terms and Conditions Document

Bill of Quantities (BOQ) 78 Items Sign in to view GEM price trends Sign in for GEM prices

Categories 74

Required Documents

Technical Specifications 35 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details