Closed GEM

Open Tender for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in RAJAURI, JAMMU & KASHMIR

Bid Publish Date

18-Aug-2026, 3:52 pm

Bid End Date

29-Aug-2026, 4:00 pm

EMD

₹53,000

Location

RAJOURI , JAMMU AND KASHMIR

WhatsApp Generate Docs

Progress

Issue18-Aug-2026, 3:52 pm

AwardPending

Indian Army invites bids for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Towel Rail (Q3), Bathroom or Toilet Mirror (V3) (Q4), Towel Ring (Q3), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), Floor Drain Traps (V2) (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Health Faucet (Q3), Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2), Stainless Steel Shelf Rack (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3), Bathroom Water Shower (V2) (Q3), Soap Dish - Case (Q4), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), Flexible Drain Hoses for Wash Basins/ Sinks (Q3), Weld Mesh Febric as per IS 4948 (Q3), Metal Alloy Casting Water Tap with Aerator (V2) (Q3) in RAJAURI, JAMMU & KASHMIR. Quantity: 1485. Submission Deadline: 29-08-2026 16: 00: 00. Submit your proposal before the deadline.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Tender Data

Bid Details

Quantity

1485

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

OEM Avg. Turnover

Past Performance

50 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Towel Rail (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Towel Ring (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Floor Drain Traps (V2) (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Health Faucet (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) , Stainless Steel Shelf Rack (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , Bathroom Water Shower (V2) (Q3) , Soap Dish - Case (Q4) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Weld Mesh Febric as per IS 4948 (Q3) , Metal Alloy Casting Water Tap with Aerator (V2) (Q3)

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Rajauri

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Rajauri	Rajauri	-	-	16	15	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 65

GeM-Bidding-9762289.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

CATALOG-Specification-39

CATALOG Specification

CATALOG-Specification-40

CATALOG Specification

CATALOG-Specification-41

CATALOG Specification

CATALOG-Specification-42

CATALOG Specification

CATALOG-Specification-43

CATALOG Specification

CATALOG-Specification-44

CATALOG Specification

CATALOG-Specification-45

CATALOG Specification

CATALOG-Specification-46

CATALOG Specification

CATALOG-Specification-47

CATALOG Specification

CATALOG-Specification-48

CATALOG Specification

CATALOG-Specification-49

CATALOG Specification

CATALOG-Specification-50

CATALOG Specification

CATALOG-Specification-51

CATALOG Specification

CATALOG-Specification-52

CATALOG Specification

CATALOG-Specification-53

CATALOG Specification

CATALOG-Specification-54

CATALOG Specification

CATALOG-Specification-55

CATALOG Specification

CATALOG-Specification-56

CATALOG Specification

CATALOG-Specification-57

CATALOG Specification

CATALOG-Specification-58

CATALOG Specification

CATALOG-Specification-59

CATALOG Specification

CATALOG-Specification-60

CATALOG Specification

CATALOG-Specification-61

CATALOG Specification

CATALOG-Specification-62

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Forged brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	ABS
Materials	Material of Bonnet of Tap/ Valve	ABS
Materials	Material of Spindle of Tap/ Valve	ABS-PC Alloy
Materials	Material of Handle of Tap/ Valve	ABS
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	300 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Flat
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Clamp Support
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Category	Specification	Requirement
Generic	Ring Shape	Circular
Material & Dimensions	Ring Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	200 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	6 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	50 mm
Material & Dimensions	Mounting Plate Size (in mm)	40 mm
Design & Configuration	Ring Movement Type	Fixed Ring
Load & Performance	Recommended Load Capacity (in kg)	Up to 2 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Close Coupled Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Any other Corrosion-resistant Material
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Square
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	Without
Generic	Frame Material	NA (Frameless)
Generic	Frame Color	NA
Generic	Mirror Mounting / Fixing System	Clamp Support
Dimensions	Width/Diameter of Mirror (inch)	>45 to ≤50
Dimensions	Height/Diameter of Mirror (inch)	>45 to ≤50
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Category	Specification	Requirement
Generic	Material	PVC
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	No
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	No
Dimensions	Overall Size (Length x Breadth x Height) in mm	100 mm x 100 mm x 100 mm
Performance	Flow Rate Capacity	Medium Duty

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	High Tensile Brass (conforming to HT1 or HT2 of IS 320)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Category	Specification	Requirement
Generic	Pressure rating (Bar)	1
Generic	Flow Rate , Minimum (lpm)	8, 9, 10, 11 Or higher
Material & Construction	Material of construction	Stainless Steel
Material & Construction	Hose Material	PVC
Material & Construction	Hose length ( in meters)	1.5
Material & Construction	Handle Type	Lever
Material & Construction	Anti bacterial coating	Yes

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl without drainer
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	No

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	Yes

Category	Specification	Requirement
GENERIC	Configuration	With 3-Shelf (including top shelf)
GENERIC	Shape of support structure	Rectangular hollow type
GENERIC	Ground clearance (mm)	100 mm
GENERIC	Mode of supply	Assembled Ready To Use
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	1.2 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	1.2 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1675 mm
DIMENSION	Height of support structure ± 10 mm	1395 mm
DIMENSION	Size of support structure	40 mm x 40 mm
WARRANTY	Warranty period	3 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	Yes

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Rectangular Loft Tank with Lid
Generic Requirement	Layer of Tank	Single Layered, Double Layered
Dimensions	Minimum Net Capacity (In Liter)	500 Liter

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Stainless Steel
End Connections & Fittings	Surface Finish	Nickel Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Single Layered, Double Layered
Dimensions	Minimum Net Capacity (In Liter)	2000 Liter

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	120 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	OPAQUE
Lid Details	Lid type (according to fixation)	DETACHABLE

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polypropylene
Material	Materials of Hinging Device	Suitable Plastic(with reinforcement)
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 2

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Folding Rail
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Material & Dimensions	Rail Material	PVC Plastic
Material & Dimensions	Mounting Bracket Material	PVC Plastic
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Plastic

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	4

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
DIMENSION	Nominal Size	50 mm for sink
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	2

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Fabric Reinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Heavy Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Threaded Adapter
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Silicone

Browse Tenders

Categories

States

Cities

Authorities

Open Tender for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in RAJAURI, JAMMU & KASHMIR

Authority & Contact

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 65

GeM-Bidding-9762289.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

CATALOG-Specification-39

CATALOG-Specification-40

CATALOG-Specification-41

CATALOG-Specification-42

CATALOG-Specification-43

CATALOG-Specification-44

CATALOG-Specification-45

CATALOG-Specification-46

CATALOG-Specification-47

CATALOG-Specification-48

CATALOG-Specification-49

CATALOG-Specification-50

CATALOG-Specification-51

CATALOG-Specification-52

CATALOG-Specification-53

CATALOG-Specification-54

CATALOG-Specification-55

CATALOG-Specification-56

CATALOG-Specification-57

CATALOG-Specification-58

CATALOG-Specification-59

CATALOG-Specification-60

CATALOG-Specification-61

Category	Specification	Requirement
CONSTRUCTIONAL	Material	Stainless steel wire grade X 04 Cr 17 Ni 12 Mo 2 of IS 6528
CONSTRUCTIONAL	Square Mesh Size (centre to centre distance bothways) ± 5 % (mm)	NA for Oblong Mesh
CONSTRUCTIONAL	Nominal Diameter of Square Mesh Wire	2 mm
CONSTRUCTIONAL	Oblong Mesh Size Pitch of Wire Longitudinal (± 5 %)	NA for Square Mesh
CONSTRUCTIONAL	Oblong Mesh Size Pitch of Wire Transverse (± 5 %)	NA for Square Mesh
CONSTRUCTIONAL	Nominal Diameter of Oblong Mesh Wire Longitudinal	NA for Square Mesh
CONSTRUCTIONAL	Nominal Diameter of Oblong Mesh Wire Transverse	NA for Square Mesh
CONSTRUCTIONAL	Width of Fabric	1.2 m
CONSTRUCTIONAL	Length of Fabric	3.0 m
CERTIFICATION	ISI Marked	No

Category	Specification	Requirement
ITEM	Tap Mounting Type	Disc tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	15

Category	Specification	Requirement
ITEM	Tap Mounting Type	Ball tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Plastic
Dimension	Nominal Thread Size of Tap (mm)	20