Invitation to Bid - 428720335675,428720335772,428720335481,425106345696,424106349767,449622201807,449622201904,44962220 in BANGALORE, KARNATAKA
Progress
RAQuantity
675
Category
428720335675
Bid Type
Two Packet Bid
Categories
56
Hindustan Aeronautics Limited (hal) announces a tender for 428720335675, 428720335772, 428720335481, 425106345696, 424106349767, 449622201807, 449622201904, 449622202001, 449622202195, 424106338130, 499705601774, 499705601871, 423306080273, 423306080467, 423306080661, 424106352871, 423142633624, 424106357624, 424106357721, 424106357818, 424106357915, 428355129317, 428355128832, 428355128929, 428355129026, 428355129123, 428355129220, 423399016846, 423399016943, 423399011414, 423399017428, 423399017525, 423399017622, 423399017719, 454901325442, 454901350856, 454901366570, 454901372293, 454901377240, 424101110121, 424101110218, 424101110315, 424102125420, 424101125641, 424101320514, 424101125544, 424101125738, 424101330408, 424101110412, 424104125468, 424104310248, 424104310345, 424101110509, 424101110606, 424104310442, 424101110703, 424101110897, 424103120446, 424103120543, 424103325407, 424103130437, 424101110994, 424103330548, 424147416272, 424105125436, 424101111091, 424105325450, 424105130480, 424101111188, 424105330494, 424101111285, 424103121513, 424106325423, 424101111382, 424101111479, 424101111576, 425740003785, 425740001169, 425740007959, 428165112428, 414900065511, 428535220675, 428535220778, 428535220875, 428355133003, 428355132906, 428535220972, 428535221069, 428535221263, 428134169038, 428535221360, 424106126209, 428535221457, 428535221554, 428127174273, 428535221651, 421521006345, 424106354811 in BANGALORE, KARNATAKA. Quantity: 675. Submission Deadline: 29-08-2025 09: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
428720335675 , 428720335772 , 428720335481 , 425106345696 , 424106349767 , 449622201807 , 449622201904 , 449622202001 , 449622202195 , 424106338130 , 499705601774 , 499705601871 , 423306080273 , 423306080467 , 423306080661 , 424106352871 , 423142633624 , 424106357624 , 424106357721 , 424106357818 , 424106357915 , 428355129317 , 428355128832 , 428355128929 , 428355129026 , 428355129123 , 428355129220 , 423399016846 , 423399016943 , 423399011414 , 423399017428 , 423399017525 , 423399017622 , 423399017719 , 454901325442 , 454901350856 , 454901366570 , 454901372293 , 454901377240 , 424101110121 , 424101110218 , 424101110315 , 424102125420 , 424101125641 , 424101320514 , 424101125544 , 424101125738 , 424101330408 , 424101110412 , 424104125468 , 424104310248 , 424104310345 , 424101110509 , 424101110606 , 424104310442 , 424101110703 , 424101110897 , 424103120446 , 424103120543 , 424103325407 , 424103130437 , 424101110994 , 424103330548 , 424147416272 , 424105125436 , 424101111091 , 424105325450 , 424105130480 , 424101111188 , 424105330494 , 424101111285 , 424103121513 , 424106325423 , 424101111382 , 424101111479 , 424101111576 , 425740003785 , 425740001169 , 425740007959 , 428165112428 , 414900065511 , 428535220675 , 428535220778 , 428535220875 , 428355133003 , 428355132906 , 428535220972 , 428535221069 , 428535221263 , 428134169038 , 428535221360 , 424106126209 , 428535221457 , 428535221554 , 428127174273 , 428535221651 , 421521006345 , 424106354811
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-8125794.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
98 Items Sign in to view GEM price trends Sign in for GEM prices
428720335675
ALLEN KEY SET TO METRIC BALL ENDED HEXAGON KEY WRENCH SET SIZE 1 POINT 5 TO 10MM CHROME VANADIUM GUN METAL BY CHROME PLATED FINISH
428720335772
ALLEN KEY SET TO INCHES BALL ENDED HEXAGON KEY WRENCH SET 1 BY 16 INCHES TO 3 BY 8 INCHES CHROME VANADIUM GUN METAL BY CHROME PLATED FINISH
428720335481
ALLEN KEY SET TO METRIC HEXAGONAL TYPE SIZE 1 POINT 5 2 POINT 0 2 POINT 5 3 POINT 0 4 POINT 0 5 POINT 0 6 POINT 0 8 POINT 0 10 POINT 0MM EXTRA LONG CHROME VANADIUM NICKEL PLATED AS PER DIN ISO2936
425106345696
ALLEN KEY SET TO INCHES SIZE 5 BY 64 INCHES 3 BY 32 INCHES 1 BY 8 INCHES 5 BY 32 INCHES 3 BY 16 INCHES 7 BY 32 INCHES 1 BY 4 INCHES 5 BY 16 INCHES 3 BY 8 INCHES LONG LENGTH CHROME VANADIUM NICKEL PLATED AS PER DIN ISO 2936
424106349767
ALLEN KEY SET TO METRIC SIZE 1 POINT 5 2 2 POINT 5 3 4 5 6 8 10MM STANDARD LENGTH CHROME VANADIUM NICKEL PLATED AS PER DIN ISO 2936
449622201807
FLAP WHEEL 3 BY 8 INCHES DIA X 3 BY 8 INCHES WIDTH TO 120 GRIT 1 BY 8 INCHES SHANK
449622201904
FLAP WHEEL 3 BY 8 INCHES DIA X 3 BY 8 INCHES WIDTH TO 180 GRIT 1 BY 8 INCHES SHANK
449622202001
FLAP WHEEL 3 BY 4 INCHES DIA X 3 BY 8 INCHES WIDTH TO 120 GRIT 1 BY 8 INCHES SHANK
449622202195
FLAP WHEEL 3 BY 4 INCHES DIA X 3 BY 8 INCHES WIDTH TO 180 GRIT 1 BY 8 INCHES SHANK
424106338130
COMBINATION SPANNER SET SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 AND 24MM RING HEAD ANGLED AT 15 DEGREE OPEN END HEAD ANGLES AT 15 DEGREE CHROME FINISH
499705601774
TOOL BOX
499705601871
TOOL BOX
423306080273
RATCHET TO SHORT HANDLE 1 BY 4 INCHES SQURE DRIVE LENGTH 85 TO 120MM NUMBER OF TEETH 60 WORKING ANGLE 6 DEGREE REVERSIBLE DIN 3122 BY ISO 3315
423306080467
PALM CONTROL RATCHET 1 BY 4 INCHES SQUARE DRIVE 60 BY 72 TOOTH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS REVERSING BY ROTATING CAP OR QUICK RELEASE SAFETY LOCK BI TO MATERIAL ELASTOMER GRIP AS PER DIN 3122 BY ISO 3315 OVERALL LENGTH 90 TO 125MM
423306080661
PALM CONTROL RATCHET 3 BY 8 INCHES SQUARE DRIVE PALM CONTROL RATCHET 60 BY 72 TOOTH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS REVERSING BY ROTATING CAP OR QUICK RELEASE SAFETY LOCK BI TO MATERIAL ELASTOMER GRIP AS PER DIN 3122 BY ISO 3315 OVERALL LENGTH 190 TO 225MM
424106352871
PALM CONTROL RATCHET 1 BY 2 INCHES SQUARE DRIVE 60 BY 72 TEETH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS PALM CONTROL SYSTEM RING REVERSING OVERALL LENGTH 250 TO 275MM
423142633624
BIT RATCHET 1 BY 4 INCHES SQUARE DRIVE LENGTH 117 TO 130MM REVERSIBLE WITH 2 TO COMPONENT
424106357624
COMBINATION SPANNER SET SIZE 5 5 POINT 5 6 7 8 9 10 12 14MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN 3113 BY ISO 3318
424106357721
COMBINATION SPANNER SET SIZE 1 BY 4 INCHES 9 BY 32 INCHES 5 BY 16 INCHES 11 BY 32 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES 9 BY 16 INCHES CHROME ALLOY STEEL CHROME PLATED AS PERDIN 3113 BY ISO 3318DIN 3113
424106357818
DOUBLE ENDED RING SPANNER SET SIZE 7 BY 32 INCHES 1 BY 4 INCHES 5 BY 16 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES WITH PLASTIC BOX OR TRAY TO ACCOMADATE CHROME ALLOY STEEL CHROME PLATED AS PER ISO 691 BY DIN 838
424106357915
DOUBLE ENDED RING SPANNERS SET SIZE 6 X 7 8 X 9 10 X 11 12 X 13 14 X 15 16 X 17 18 X 21 19 X 22MM WITH PLASTIC BOX OR TRAY TO ACCOMADATE CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691
428355129317
COMBINATION RATCHET WRENCH SET SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 AND 24MM RING HEAD ANGLED AT 15 DEGREE OPEN END HEAD ANGLED AT 15 DEGREE ALL SIZES IN A STANDARD OVERALL LENGTH CHROME FINISH WITH THERMOFORMED and FOAM TRAY AS PER DIN BY ISO 691
428355128832
COMBINATION REVERSIBLE RATCHET SIZE 6MM 15 DEGREE OFFSET OVERALL LENGTH 100 TO 120MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691
428355128929
COMBINATION REVERSIBLE RATCHET SIZE 7MM 15 DEGREE OFFSET OVERALL LENGTH 120 TO 140MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691
428355129026
COMBINATION REVERSIBLE RATCHET SIZE 8MM 15 DEGREE OFFSET OVERALL LENGTH 130 TO 150MM CHROME ALLOY STEEL CHROME PLATED
428355129123
COMBINATION REVERSIBLE RATCHET SIZE 9MM 15 DEGREE OFFSET OVERALL LENGTH 140 TO 160MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691
428355129220
COMBINATION REVERSIBLE RATCHET SIZE 10MM 15 DEGREE OFFSET OVERALL LENGTH 150 TO 170MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691
423399016846
SCREWDRIVERF OR SLOTTED SCREWS SIZE 4 0 POINT 8 X 4 POINT 0 X 125 TO 150MM X 210MM CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2
423399016943
SCREWDRIVERFOR SLOTTED SCREWS SIZE 6 1 POINT 0 X 5 POINT 5 X 150 TO 200MM X 270 TO 320MM CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2
423399011414
SCREWDRIVER SIZE 1 0 POINT 6 X 3 POINT 5 X 75 X 160 TO 190MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2
423399017428
SCREWDRIVER SIZE 3 1 POINT 0 X 5 POINT 5 X 125 X 220 TO 250MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2
423399017525
SCREWDRIVER SIZE 5 1 POINT 6 X 8 POINT 0 X 175 X 300 TO 325MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2
423399017622
BITS SCREW DRIVER SIZE 0 POINT 8 X 4 POINT 0MM OUSIDE HEXAGON 1 BY 4 INCHES FOR USE IN POWER BITS LENGTH 50 TO 75MM FOR SLOTTED SCREWS
423399017719
BITS SCREW DRIVER SIZE 1 POINT 2 X 6 POINT 5MM OUSIDE HEXAGON 1 BY 4 INCHES FOR USE IN POWER BITS LENGTH 50 TO 60MM FOR SLOTTED SCREWS
454901325442
C CLAMP JAW GAP 0 TO 1 INCHES JAW REACH 25 TO 30MM HOLDING CAPCITY 500LBS DROP FORGED TILT HEAD
454901350856
C CLAMP JAW GAP 0 TO 2 INCHES JAW REACH 50 TO 60MM HOLDING CAPCITY 3500LBS DROP FORGED TILT HEAD
454901366570
C CLAMP JAW GAP 0 TO 3 INCHES JAW REACH 60 TO 65MM HOLDING CAPCITY 3500LBS DROP FORGED TILT HEAD
454901372293
C CLAMP JAW GAP 0 TO 4 INCHES JAW REACH 70 TO 75MM HOLDING CAPCITY 6200LBS DROP FORGED TILT HEAD
454901377240
C CLAMP JAW GAP 0 TO 6 INCHES JAW REACH 90 TO 95MM HOLDING CAPCITY 6600LBS DROP FORGED TILT HEAD
424101110121
FLAT FILE WITH HANDLE BASTARD CUT LENGTH 4 INCHES
424101110218
FLAT FILE WITH HANDLE BASTARD CUT LENGTH 12 INCHES
424101110315
FLAT FILE WITH HANDLE SECOND CUT LENGTH 12 INCHES
424102125420
FLAT FILE BASTARD CUT LENGTH 10 INCHES
424101125641
FLAT FILE ROUGH CUT LENGTH 10 INCHES
424101320514
FLAT FILE SMOOTH CUT LENGTH 10 INCHES
424101125544
FLAT FILE BASTARD CUT LENGTH 12 INCHES
424101125738
FLAT FILE ROUGH CUT LENGTH 12 INCHES
424101330408
FLAT FILE SMOOTH CUT LENGTH 12 INCHES
424101110412
ROUND FILE WITH HANDLE BASTARD CUT LENGTH 10 INCHES
424104125468
ROUND FILE BASTARD CUT LENGTH 10 INCHES
424104310248
ROUND FILE ROUGH CUT LENGTH 10 INCHES
424104310345
ROUND FILE SMOOTH CUT LENGTH 10 INCHES
424101110509
ROUND FILE BASTARD CUT LENGTH 12 INCHES
424101110606
ROUND FILE ROUGH CUT LENGTH 12 INCHES
424104310442
ROUND FILE SMOOTH CUT LENGTH 12 INCHES
424101110703
HALF ROUND FILE WITH HANDLE BASTARD CUT LENGTH 6 INCHES
424101110897
HALF ROUND FILE WITH HANDLE BASTARD CUT LENGTH 12 INCHES
424103120446
HALF ROUND FILE BASTARD CUT LENGTH 10 INCHES
424103120543
HALF ROUND FILE ROUGH CUT LENGTH 10 INCHES
424103325407
HALF ROUND FILE SMOOTH CUT LENGTH 10 INCHES
424103130437
HALF ROUND FILE BASTARD CUT LENGTH 12 INCHES
424101110994
HALF ROUND FILE ROUGH CUT LENGTH 12 INCHES
424103330548
HALF ROUND FILE SMOOTH CUT LENGTH 12 INCHES
424147416272
NEEDLE FILE SET ROUND HALF ROUND FLAT ENTRY CROSSING FILE KNIFE SQUARE TRIANGULAR FILE STRIP BR TILE HOOK OVAL
424105125436
SQUARE FILE BASTARD CUT LENGTH 10 INCHES
424101111091
SQUARE FILE ROUGH CUT LENGTH 10 INCHES
424105325450
SQUARE FILE SMOOTH CUT LENGTH 10 INCHES
424105130480
SQUARE FILE BASTARD CUT LENGTH 12 INCHES
424101111188
SQUARE FILE ROUGH CUT LENGTH 12 INCHES
424105330494
SQUARE FILE SMOOTH CUT LENGTH 12 INCHES
424101111285
TRIANGLE FILE BASTARD CUT LENGTH 10 INCHES
424103121513
TRIANGLE FILE ROUGH CUT LENGTH 10 INCHES
424106325423
TRIANGLE FILE SMOOTH CUT LENGTH 10 INCHES
424101111382
TRIANGLE FILE BASTARD CUT LENGTH 12 INCHES
424101111479
TRIANGLE FILE ROUGH CUT LENGTH 12 INCHES
424101111576
TRIANGLE FILE SMOOTH CUT LENGTH 12 INCHES
425740003785
RATCHET TAP WRENCH MAXIMUM OPENING 5MM TWO WAY RATCHET RATCHET LOCKING SYSTEM POLISHED CHROME FINISH LENGTH 80 TO 100MM
425740001169
SHORT RATCHETING TAP WRENCHMAXIMUM OPENING 8MM TWO WAY RATCHET RATCHET LOCKING SYSTEM OVERALL LENGTH 100 TO 120MM POLISHED CHROME FINISH
425740007959
ADJUSTABLE TAP WRENCH MIN TO MAX 5 TO 16 MACHINED AND HARDENED CLAMP GREY HAMMERED FINISH LENGTH 360 TO 400MM
428165112428
TAP WRENCH T HANDLE OPENING 0 TO 6MM MAX LENGTH APPROX POINT 200MM
414900065511
DIE WRENCH TO HOLD THE DIE SIZE 1 TO 1 BY 2 INCHES OVERALL LENGTH 320 TO 350MM GREY HAMMERED FINISH
428535220675
HEXAGONAL SOCKET SET 1 BY 4 INCHES SQ POINT DRIVE SIZES 1 BY 8 INCHES 5 BY 32 INCHES 3 BY 16 INCHES 7 BY 32 INCHES 1 BY 4 INCHES 9 BY 32 INCHES 5 BY 16 INCHES 11 BY 32 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES 9 BY 16 INCHES LENGTH 20 TO 25MM CHROME PLATED
428535220778
HEXAGONAL SOCKET SET 1 BY 4 INCHES SQ POINT DRIVE SIZES 3 3 POINT 2 3 POINT 5 4 4 POINT 5 5 5 POINT 5 6 7 8 9 10 11 12 13 14 LENGTH 20 TO 25MM CHROME PLATED
428535220875
RATCHETING BIT HOLDER SIZE 1 1 BY 4 INCHES LENGTH 250MM FOR BITS SCREWDRIVER INSERTS WITH EXTERNAL HEX 1 BY 4 INCHES
428355133003
TWEEZER STRAIGHT BLUNT FINELY MILLED INSIDE STAINLESS STEEL LENGTH 125 TO 160MM
428355132906
TWEEZER BENT BLUNT FINELY MILLED INSIDE STAINLESS STEEL LENGTH 140 TO 175MM
428535220972
SNAP OFF BLADE AND CUTTER WITH THREE 18MM SNAP TO OFF BLADES ONE BLADE FITTED AND TWO IN THE MAGAZINE SLIDER WITH BLADE TO LOCKING FUNCTION AUTOMATIC BLADE RELOADINGFOR USE CUTTING CARD RUBBER LEATHER WOODMADE UP OF CAST ZINC LENGTH 170 TO 190MM
428535221069
ADAPTOR MANUALLY OPERATED1 BY 4 INCHES SQ POINT DRIVE WITH BALL BEARING LENGTH 25MM CHROME ALLOY STEEL POINT
428535221263
QUICK CHANGE HOLDER1 BY 4 INCHES SQ POINT DRIVE FOR SCREWDRIVER BITS WITH QUICK TO ACTION CHUCK LENGTH 60 TO 65MM
428134169038
ADJUSTABLE WRENCHJ AW OPENING 0 TO 30 TO 33MM LENGTH 200 TO 250MM CHROME VANADIUM CHROME PLATED BI TO METALLIC GRIP
428535221360
SELF GRIP PLIER FORGED COUNTERED JAWS QUICK RELEASE LEVER WIRE CUTTER BRIGHT NICKEL PLATED LENGTH 250 TO 275MM CHROME VANADIUM
424106126209
COMBINATION PLIER OPENING 23MM MAXIMUM OVERALL LENGTH 180 TO 200MM LONG LEVER ARM OFFSET PIVOT VERY HARD CUTTING EDGES 61 BY 63HRC REMOVABLE RETURN SPRING BI TO MATERIAL ERGONOMIC GRIP CHROME FINISH
428535221457
SNIPE NOSE PLIER MULTI TO COMPONENT HANDLES WITH SOFTER LAYERS BENT 45 DEGREE HALF ROUND LONG TAPERING SERRATED JAWS WITH BURNER HOLE PRECISION EDGES FOR SOFT AND HARD WIRES LENGTH 150 TO 175MM CHROME PLATED
428535221554
PARALLEL PIN PUNCHES SET6 PIECES INCLUDES SIZES 2 BY 2 POINT 5 X 150MM 3 X 150MM 4 X 150MM 5 X 150MM 6 X 150MM AND 8 X 150MM IN TEXTILE BAG OR PLASTIC STAND OCTAGONAL CHROME VANADIUM LACQUERED SILVER
428127174273
FEELER GAUGE SIZE 0 POINT 05 TO 1 POINT 00MM LENGTH 100MM TAPERED BLADES NICKEL PLATED CASE POINT
428535221651
IMPACT DRIVER HEXAGON INSIDE 1 BY 4 INCHES LENGTH 130 TO 150 MM SUITABLE FOR SCREW M3 TO M6
421521006345
CENTRE PUNCH SIZE 10 MM OCTAGONAL OVERALL LENGTH 120MM CHROME VANADITM LACQUERED SILVER
424106354811
PNEUMATIC GREASE GUN CAPACITY 500CM3 400GM GREASE FLOW 1CM3 BY STRIKE AIR PRESSURE 2 TO 8BAR SUPPLY FITTING DIAMETER 8MM FILLING WITH CARTRIDGE OR BULK GREASE LENGTH 179MM HEIGHT 380MM ALUMINIUM BODY SUPPLIED WITH STRAIGHT ANGLED SPOUT AND TIP
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | 428720335675 | ALLEN KEY SET TO METRIC BALL ENDED HEXAGON KEY WRENCH SET SIZE 1 POINT 5 TO 10MM CHROME VANADIUM GUN METAL BY CHROME PLATED FINISH | 16 | pieces | paranjothi@1980 | 30 | |
| 2 | 428720335772 | ALLEN KEY SET TO INCHES BALL ENDED HEXAGON KEY WRENCH SET 1 BY 16 INCHES TO 3 BY 8 INCHES CHROME VANADIUM GUN METAL BY CHROME PLATED FINISH | 16 | pieces | paranjothi@1980 | 30 | |
| 3 | 428720335481 | ALLEN KEY SET TO METRIC HEXAGONAL TYPE SIZE 1 POINT 5 2 POINT 0 2 POINT 5 3 POINT 0 4 POINT 0 5 POINT 0 6 POINT 0 8 POINT 0 10 POINT 0MM EXTRA LONG CHROME VANADIUM NICKEL PLATED AS PER DIN ISO2936 | 4 | pieces | paranjothi@1980 | 30 | |
| 4 | 425106345696 | ALLEN KEY SET TO INCHES SIZE 5 BY 64 INCHES 3 BY 32 INCHES 1 BY 8 INCHES 5 BY 32 INCHES 3 BY 16 INCHES 7 BY 32 INCHES 1 BY 4 INCHES 5 BY 16 INCHES 3 BY 8 INCHES LONG LENGTH CHROME VANADIUM NICKEL PLATED AS PER DIN ISO 2936 | 4 | pieces | paranjothi@1980 | 30 | |
| 5 | 424106349767 | ALLEN KEY SET TO METRIC SIZE 1 POINT 5 2 2 POINT 5 3 4 5 6 8 10MM STANDARD LENGTH CHROME VANADIUM NICKEL PLATED AS PER DIN ISO 2936 | 2 | pieces | paranjothi@1980 | 30 | |
| 6 | 449622201807 | FLAP WHEEL 3 BY 8 INCHES DIA X 3 BY 8 INCHES WIDTH TO 120 GRIT 1 BY 8 INCHES SHANK | 20 | pieces | paranjothi@1980 | 30 | |
| 7 | 449622201904 | FLAP WHEEL 3 BY 8 INCHES DIA X 3 BY 8 INCHES WIDTH TO 180 GRIT 1 BY 8 INCHES SHANK | 20 | pieces | paranjothi@1980 | 30 | |
| 8 | 449622202001 | FLAP WHEEL 3 BY 4 INCHES DIA X 3 BY 8 INCHES WIDTH TO 120 GRIT 1 BY 8 INCHES SHANK | 20 | pieces | paranjothi@1980 | 30 | |
| 9 | 449622202195 | FLAP WHEEL 3 BY 4 INCHES DIA X 3 BY 8 INCHES WIDTH TO 180 GRIT 1 BY 8 INCHES SHANK | 20 | pieces | paranjothi@1980 | 30 | |
| 10 | 424106338130 | COMBINATION SPANNER SET SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 AND 24MM RING HEAD ANGLED AT 15 DEGREE OPEN END HEAD ANGLES AT 15 DEGREE CHROME FINISH | 11 | pieces | paranjothi@1980 | 30 | |
| 11 | 499705601774 | TOOL BOX | 6 | pieces | paranjothi@1980 | 30 | |
| 12 | 499705601871 | TOOL BOX | 4 | pieces | paranjothi@1980 | 30 | |
| 13 | 423306080273 | RATCHET TO SHORT HANDLE 1 BY 4 INCHES SQURE DRIVE LENGTH 85 TO 120MM NUMBER OF TEETH 60 WORKING ANGLE 6 DEGREE REVERSIBLE DIN 3122 BY ISO 3315 | 10 | pieces | paranjothi@1980 | 30 | |
| 14 | 423306080467 | PALM CONTROL RATCHET 1 BY 4 INCHES SQUARE DRIVE 60 BY 72 TOOTH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS REVERSING BY ROTATING CAP OR QUICK RELEASE SAFETY LOCK BI TO MATERIAL ELASTOMER GRIP AS PER DIN 3122 BY ISO 3315 OVERALL LENGTH 90 TO 125MM | 42 | pieces | paranjothi@1980 | 30 | |
| 15 | 423306080661 | PALM CONTROL RATCHET 3 BY 8 INCHES SQUARE DRIVE PALM CONTROL RATCHET 60 BY 72 TOOTH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS REVERSING BY ROTATING CAP OR QUICK RELEASE SAFETY LOCK BI TO MATERIAL ELASTOMER GRIP AS PER DIN 3122 BY ISO 3315 OVERALL LENGTH 190 TO 225MM | 14 | pieces | paranjothi@1980 | 30 | |
| 16 | 424106352871 | PALM CONTROL RATCHET 1 BY 2 INCHES SQUARE DRIVE 60 BY 72 TEETH MECHANISM FOR 5 BY 6 DEGREE INCREMENTS PALM CONTROL SYSTEM RING REVERSING OVERALL LENGTH 250 TO 275MM | 4 | pieces | paranjothi@1980 | 30 | |
| 17 | 423142633624 | BIT RATCHET 1 BY 4 INCHES SQUARE DRIVE LENGTH 117 TO 130MM REVERSIBLE WITH 2 TO COMPONENT | 8 | pieces | paranjothi@1980 | 30 | |
| 18 | 424106357624 | COMBINATION SPANNER SET SIZE 5 5 POINT 5 6 7 8 9 10 12 14MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN 3113 BY ISO 3318 | 3 | pieces | paranjothi@1980 | 30 | |
| 19 | 424106357721 | COMBINATION SPANNER SET SIZE 1 BY 4 INCHES 9 BY 32 INCHES 5 BY 16 INCHES 11 BY 32 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES 9 BY 16 INCHES CHROME ALLOY STEEL CHROME PLATED AS PERDIN 3113 BY ISO 3318DIN 3113 | 4 | pieces | paranjothi@1980 | 30 | |
| 20 | 424106357818 | DOUBLE ENDED RING SPANNER SET SIZE 7 BY 32 INCHES 1 BY 4 INCHES 5 BY 16 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES WITH PLASTIC BOX OR TRAY TO ACCOMADATE CHROME ALLOY STEEL CHROME PLATED AS PER ISO 691 BY DIN 838 | 4 | pieces | paranjothi@1980 | 30 | |
| 21 | 424106357915 | DOUBLE ENDED RING SPANNERS SET SIZE 6 X 7 8 X 9 10 X 11 12 X 13 14 X 15 16 X 17 18 X 21 19 X 22MM WITH PLASTIC BOX OR TRAY TO ACCOMADATE CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691 | 3 | pieces | paranjothi@1980 | 30 | |
| 22 | 428355129317 | COMBINATION RATCHET WRENCH SET SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 AND 24MM RING HEAD ANGLED AT 15 DEGREE OPEN END HEAD ANGLED AT 15 DEGREE ALL SIZES IN A STANDARD OVERALL LENGTH CHROME FINISH WITH THERMOFORMED and FOAM TRAY AS PER DIN BY ISO 691 | 6 | pieces | paranjothi@1980 | 30 | |
| 23 | 428355128832 | COMBINATION REVERSIBLE RATCHET SIZE 6MM 15 DEGREE OFFSET OVERALL LENGTH 100 TO 120MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691 | 10 | pieces | paranjothi@1980 | 30 | |
| 24 | 428355128929 | COMBINATION REVERSIBLE RATCHET SIZE 7MM 15 DEGREE OFFSET OVERALL LENGTH 120 TO 140MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691 | 10 | pieces | paranjothi@1980 | 30 | |
| 25 | 428355129026 | COMBINATION REVERSIBLE RATCHET SIZE 8MM 15 DEGREE OFFSET OVERALL LENGTH 130 TO 150MM CHROME ALLOY STEEL CHROME PLATED | 10 | pieces | paranjothi@1980 | 30 | |
| 26 | 428355129123 | COMBINATION REVERSIBLE RATCHET SIZE 9MM 15 DEGREE OFFSET OVERALL LENGTH 140 TO 160MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691 | 10 | pieces | paranjothi@1980 | 30 | |
| 27 | 428355129220 | COMBINATION REVERSIBLE RATCHET SIZE 10MM 15 DEGREE OFFSET OVERALL LENGTH 150 TO 170MM CHROME ALLOY STEEL CHROME PLATED AS PER DIN BY ISO 691 | 10 | pieces | paranjothi@1980 | 30 | |
| 28 | 423399016846 | SCREWDRIVERF OR SLOTTED SCREWS SIZE 4 0 POINT 8 X 4 POINT 0 X 125 TO 150MM X 210MM CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2 | 5 | pieces | paranjothi@1980 | 30 | |
| 29 | 423399016943 | SCREWDRIVERFOR SLOTTED SCREWS SIZE 6 1 POINT 0 X 5 POINT 5 X 150 TO 200MM X 270 TO 320MM CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2 | 5 | pieces | paranjothi@1980 | 30 | |
| 30 | 423399011414 | SCREWDRIVER SIZE 1 0 POINT 6 X 3 POINT 5 X 75 X 160 TO 190MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2 | 2 | pieces | paranjothi@1980 | 30 | |
| 31 | 423399017428 | SCREWDRIVER SIZE 3 1 POINT 0 X 5 POINT 5 X 125 X 220 TO 250MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2 | 3 | pieces | paranjothi@1980 | 30 | |
| 32 | 423399017525 | SCREWDRIVER SIZE 5 1 POINT 6 X 8 POINT 0 X 175 X 300 TO 325MM LENGTH CHROME ALLOY STEEL CHROME PLATED BLACK TIPS AS PER DIN ISO 2380 TO 1 DIN ISO 2380 TO 2 | 3 | pieces | paranjothi@1980 | 30 | |
| 33 | 423399017622 | BITS SCREW DRIVER SIZE 0 POINT 8 X 4 POINT 0MM OUSIDE HEXAGON 1 BY 4 INCHES FOR USE IN POWER BITS LENGTH 50 TO 75MM FOR SLOTTED SCREWS | 4 | pieces | paranjothi@1980 | 30 | |
| 34 | 423399017719 | BITS SCREW DRIVER SIZE 1 POINT 2 X 6 POINT 5MM OUSIDE HEXAGON 1 BY 4 INCHES FOR USE IN POWER BITS LENGTH 50 TO 60MM FOR SLOTTED SCREWS | 4 | pieces | paranjothi@1980 | 30 | |
| 35 | 454901325442 | C CLAMP JAW GAP 0 TO 1 INCHES JAW REACH 25 TO 30MM HOLDING CAPCITY 500LBS DROP FORGED TILT HEAD | 50 | pieces | paranjothi@1980 | 30 | |
| 36 | 454901350856 | C CLAMP JAW GAP 0 TO 2 INCHES JAW REACH 50 TO 60MM HOLDING CAPCITY 3500LBS DROP FORGED TILT HEAD | 50 | pieces | paranjothi@1980 | 30 | |
| 37 | 454901366570 | C CLAMP JAW GAP 0 TO 3 INCHES JAW REACH 60 TO 65MM HOLDING CAPCITY 3500LBS DROP FORGED TILT HEAD | 30 | pieces | paranjothi@1980 | 30 | |
| 38 | 454901372293 | C CLAMP JAW GAP 0 TO 4 INCHES JAW REACH 70 TO 75MM HOLDING CAPCITY 6200LBS DROP FORGED TILT HEAD | 20 | pieces | paranjothi@1980 | 30 | |
| 39 | 454901377240 | C CLAMP JAW GAP 0 TO 6 INCHES JAW REACH 90 TO 95MM HOLDING CAPCITY 6600LBS DROP FORGED TILT HEAD | 10 | pieces | paranjothi@1980 | 30 | |
| 40 | 424101110121 | FLAT FILE WITH HANDLE BASTARD CUT LENGTH 4 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 41 | 424101110218 | FLAT FILE WITH HANDLE BASTARD CUT LENGTH 12 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 42 | 424101110315 | FLAT FILE WITH HANDLE SECOND CUT LENGTH 12 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 43 | 424102125420 | FLAT FILE BASTARD CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 44 | 424101125641 | FLAT FILE ROUGH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 45 | 424101320514 | FLAT FILE SMOOTH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 46 | 424101125544 | FLAT FILE BASTARD CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 47 | 424101125738 | FLAT FILE ROUGH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 48 | 424101330408 | FLAT FILE SMOOTH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 49 | 424101110412 | ROUND FILE WITH HANDLE BASTARD CUT LENGTH 10 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 50 | 424104125468 | ROUND FILE BASTARD CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 51 | 424104310248 | ROUND FILE ROUGH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 52 | 424104310345 | ROUND FILE SMOOTH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 53 | 424101110509 | ROUND FILE BASTARD CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 54 | 424101110606 | ROUND FILE ROUGH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 55 | 424104310442 | ROUND FILE SMOOTH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 56 | 424101110703 | HALF ROUND FILE WITH HANDLE BASTARD CUT LENGTH 6 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 57 | 424101110897 | HALF ROUND FILE WITH HANDLE BASTARD CUT LENGTH 12 INCHES | 5 | pieces | paranjothi@1980 | 30 | |
| 58 | 424103120446 | HALF ROUND FILE BASTARD CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 59 | 424103120543 | HALF ROUND FILE ROUGH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 60 | 424103325407 | HALF ROUND FILE SMOOTH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 61 | 424103130437 | HALF ROUND FILE BASTARD CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 62 | 424101110994 | HALF ROUND FILE ROUGH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 63 | 424103330548 | HALF ROUND FILE SMOOTH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 64 | 424147416272 | NEEDLE FILE SET ROUND HALF ROUND FLAT ENTRY CROSSING FILE KNIFE SQUARE TRIANGULAR FILE STRIP BR TILE HOOK OVAL | 6 | pieces | paranjothi@1980 | 30 | |
| 65 | 424105125436 | SQUARE FILE BASTARD CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 66 | 424101111091 | SQUARE FILE ROUGH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 67 | 424105325450 | SQUARE FILE SMOOTH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 68 | 424105130480 | SQUARE FILE BASTARD CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 69 | 424101111188 | SQUARE FILE ROUGH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 70 | 424105330494 | SQUARE FILE SMOOTH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 71 | 424101111285 | TRIANGLE FILE BASTARD CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 72 | 424103121513 | TRIANGLE FILE ROUGH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 73 | 424106325423 | TRIANGLE FILE SMOOTH CUT LENGTH 10 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 74 | 424101111382 | TRIANGLE FILE BASTARD CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 75 | 424101111479 | TRIANGLE FILE ROUGH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 76 | 424101111576 | TRIANGLE FILE SMOOTH CUT LENGTH 12 INCHES | 2 | pieces | paranjothi@1980 | 30 | |
| 77 | 425740003785 | RATCHET TAP WRENCH MAXIMUM OPENING 5MM TWO WAY RATCHET RATCHET LOCKING SYSTEM POLISHED CHROME FINISH LENGTH 80 TO 100MM | 4 | pieces | paranjothi@1980 | 30 | |
| 78 | 425740001169 | SHORT RATCHETING TAP WRENCHMAXIMUM OPENING 8MM TWO WAY RATCHET RATCHET LOCKING SYSTEM OVERALL LENGTH 100 TO 120MM POLISHED CHROME FINISH | 12 | pieces | paranjothi@1980 | 30 | |
| 79 | 425740007959 | ADJUSTABLE TAP WRENCH MIN TO MAX 5 TO 16 MACHINED AND HARDENED CLAMP GREY HAMMERED FINISH LENGTH 360 TO 400MM | 2 | pieces | paranjothi@1980 | 30 | |
| 80 | 428165112428 | TAP WRENCH T HANDLE OPENING 0 TO 6MM MAX LENGTH APPROX POINT 200MM | 5 | pieces | paranjothi@1980 | 30 | |
| 81 | 414900065511 | DIE WRENCH TO HOLD THE DIE SIZE 1 TO 1 BY 2 INCHES OVERALL LENGTH 320 TO 350MM GREY HAMMERED FINISH | 2 | pieces | paranjothi@1980 | 30 | |
| 82 | 428535220675 | HEXAGONAL SOCKET SET 1 BY 4 INCHES SQ POINT DRIVE SIZES 1 BY 8 INCHES 5 BY 32 INCHES 3 BY 16 INCHES 7 BY 32 INCHES 1 BY 4 INCHES 9 BY 32 INCHES 5 BY 16 INCHES 11 BY 32 INCHES 3 BY 8 INCHES 7 BY 16 INCHES 1 BY 2 INCHES 9 BY 16 INCHES LENGTH 20 TO 25MM CHROME PLATED | 4 | pieces | paranjothi@1980 | 30 | |
| 83 | 428535220778 | HEXAGONAL SOCKET SET 1 BY 4 INCHES SQ POINT DRIVE SIZES 3 3 POINT 2 3 POINT 5 4 4 POINT 5 5 5 POINT 5 6 7 8 9 10 11 12 13 14 LENGTH 20 TO 25MM CHROME PLATED | 2 | pieces | paranjothi@1980 | 30 | |
| 84 | 428535220875 | RATCHETING BIT HOLDER SIZE 1 1 BY 4 INCHES LENGTH 250MM FOR BITS SCREWDRIVER INSERTS WITH EXTERNAL HEX 1 BY 4 INCHES | 3 | pieces | paranjothi@1980 | 30 | |
| 85 | 428355133003 | TWEEZER STRAIGHT BLUNT FINELY MILLED INSIDE STAINLESS STEEL LENGTH 125 TO 160MM | 3 | pieces | paranjothi@1980 | 30 | |
| 86 | 428355132906 | TWEEZER BENT BLUNT FINELY MILLED INSIDE STAINLESS STEEL LENGTH 140 TO 175MM | 3 | pieces | paranjothi@1980 | 30 | |
| 87 | 428535220972 | SNAP OFF BLADE AND CUTTER WITH THREE 18MM SNAP TO OFF BLADES ONE BLADE FITTED AND TWO IN THE MAGAZINE SLIDER WITH BLADE TO LOCKING FUNCTION AUTOMATIC BLADE RELOADINGFOR USE CUTTING CARD RUBBER LEATHER WOODMADE UP OF CAST ZINC LENGTH 170 TO 190MM | 10 | pieces | paranjothi@1980 | 30 | |
| 88 | 428535221069 | ADAPTOR MANUALLY OPERATED1 BY 4 INCHES SQ POINT DRIVE WITH BALL BEARING LENGTH 25MM CHROME ALLOY STEEL POINT | 5 | pieces | paranjothi@1980 | 30 | |
| 89 | 428535221263 | QUICK CHANGE HOLDER1 BY 4 INCHES SQ POINT DRIVE FOR SCREWDRIVER BITS WITH QUICK TO ACTION CHUCK LENGTH 60 TO 65MM | 5 | pieces | paranjothi@1980 | 30 | |
| 90 | 428134169038 | ADJUSTABLE WRENCHJ AW OPENING 0 TO 30 TO 33MM LENGTH 200 TO 250MM CHROME VANADIUM CHROME PLATED BI TO METALLIC GRIP | 14 | pieces | paranjothi@1980 | 30 | |
| 91 | 428535221360 | SELF GRIP PLIER FORGED COUNTERED JAWS QUICK RELEASE LEVER WIRE CUTTER BRIGHT NICKEL PLATED LENGTH 250 TO 275MM CHROME VANADIUM | 2 | pieces | paranjothi@1980 | 30 | |
| 92 | 424106126209 | COMBINATION PLIER OPENING 23MM MAXIMUM OVERALL LENGTH 180 TO 200MM LONG LEVER ARM OFFSET PIVOT VERY HARD CUTTING EDGES 61 BY 63HRC REMOVABLE RETURN SPRING BI TO MATERIAL ERGONOMIC GRIP CHROME FINISH | 5 | pieces | paranjothi@1980 | 30 | |
| 93 | 428535221457 | SNIPE NOSE PLIER MULTI TO COMPONENT HANDLES WITH SOFTER LAYERS BENT 45 DEGREE HALF ROUND LONG TAPERING SERRATED JAWS WITH BURNER HOLE PRECISION EDGES FOR SOFT AND HARD WIRES LENGTH 150 TO 175MM CHROME PLATED | 2 | pieces | paranjothi@1980 | 30 | |
| 94 | 428535221554 | PARALLEL PIN PUNCHES SET6 PIECES INCLUDES SIZES 2 BY 2 POINT 5 X 150MM 3 X 150MM 4 X 150MM 5 X 150MM 6 X 150MM AND 8 X 150MM IN TEXTILE BAG OR PLASTIC STAND OCTAGONAL CHROME VANADIUM LACQUERED SILVER | 5 | pieces | paranjothi@1980 | 30 | |
| 95 | 428127174273 | FEELER GAUGE SIZE 0 POINT 05 TO 1 POINT 00MM LENGTH 100MM TAPERED BLADES NICKEL PLATED CASE POINT | 3 | pieces | paranjothi@1980 | 30 | |
| 96 | 428535221651 | IMPACT DRIVER HEXAGON INSIDE 1 BY 4 INCHES LENGTH 130 TO 150 MM SUITABLE FOR SCREW M3 TO M6 | 5 | pieces | paranjothi@1980 | 30 | |
| 97 | 421521006345 | CENTRE PUNCH SIZE 10 MM OCTAGONAL OVERALL LENGTH 120MM CHROME VANADITM LACQUERED SILVER | 5 | pieces | paranjothi@1980 | 30 | |
| 98 | 424106354811 | PNEUMATIC GREASE GUN CAPACITY 500CM3 400GM GREASE FLOW 1CM3 BY STRIKE AIR PRESSURE 2 TO 8BAR SUPPLY FITTING DIAMETER 8MM FILLING WITH CARTRIDGE OR BULK GREASE LENGTH 179MM HEIGHT 380MM ALUMINIUM BODY SUPPLIED WITH STRAIGHT ANGLED SPOUT AND TIP | 1 | pieces | paranjothi@1980 | 30 |
Required Documents
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Corrigendum Updates
3 Updates Update
Extended Deadline
29-Aug-2025, 9:00 am
Opening Date
29-Aug-2025, 9:30 am
Update
Update
Extended Deadline
21-Aug-2025, 12:00 pm
Opening Date
21-Aug-2025, 12:30 pm
Reverse Auction Schedule
Start
11-Dec-2025, 1:00 pm
End
13-Dec-2025, 10:00 am
Duration: 45 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | ********** Under PMA | - | 19-08-2025 17:55:15 | |
| 2 | ********** Under PMA | - | 21-08-2025 11:40:50 | |
| 3 | ********** Under PMA | - | 12-08-2025 19:01:36 |
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-8125794.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS