Indian Army Procurement: ISO 9001 Compliant Goods Supply Tender Coimbatore Tamil Nadu 2026
Bid Publish Date
03-Oct-2026, 3:39 pm
Bid End Date
14-Oct-2026, 10:00 am
Location
Progress
Tender Overview
The Indian Army (Department of Military Affairs) invites bids from eligible suppliers for the supply of goods at the regional hub in Coimbatore, Tamil Nadu (641001). The tender involves a large item set (BOQ lists 114 items) with no itemized quantities provided in the summary. The contract permits a quantity variation of up to 25% during and after award, at contracted rates. A Demand Draft (DD) is acceptable as EMD payable to CWE, with scanned proof required at bid submission and hardcopy due within 5 days. An ISO 9001 certification requirement applies to the bidder or OEM. A positive net worth and three-year turnover documentation are mandatory. The procurement scope is limited to the supply of goods, with inspection managed by an internal committee and post-receipt checks at the consignee site. The option clause and delivery-time mechanics necessitate careful scheduling against the original delivery period.
Technical Specifications & Requirements
- Platform/Category: Supply of goods (no detailed item specs provided in the summary)
- Inspection: Post-receipt inspection by the Board at consignee site; pre-dispatch not indicated
- EMD/BD: EMD via Account Payee DD in favor of CWE; scanned copy uploaded; hardcopy within 5 days of bid end date
- Standards: ISO 9001 certification required for bidder or OEM; net-worth must be positive
- Turnover: Minimum average annual turnover for the last three financial years is required as per bid document; audited balance sheets or CA certificate to be uploaded
- Delivery: Delivery schedule follows original order end date; option to extend up to 25% quantity with proportional time adjustments; delivery period logic described in terms
- BOQ: 114 total items, with no specific quantity data in the summary; procurement scope is for goods only
Terms, Conditions & Eligibility
- Option Clause: 25% quantity increase/decrease at contracted rates; extended delivery period follows a formula, minimum 30 days
- EMD & PBG: EMD via DD; hardcopy delivery within 5 days; PBG not explicitly stated
- Certificates: ISO 9001 required; failure to upload certificates may lead to rejection
- Financial Criteria: Positive net worth; three-year turnover as per bid document; documentary evidence required (audited books or CA certificate)
- Delivery & Payment: Delivery terms tied to original order; payment terms not explicitly stated in summary
- Inspection: Board to conduct post-receipt inspection; pre-dispatch inspection not clearly mandated
- Documentation: GST, PAN, experience certificates, financial statements, technical compliance documents, OEM authorizations as applicable to bid response
Key Specifications
-
- Product/service: Supply of goods (no itemized technical specs provided in tender summary)
-
- Quantity: 114 items in BOQ, exact quantities not listed in available data
-
- EMD: Demand Draft acceptable, in favour of CWE, payable at Wellington; scanned proof required at bid submission
-
- Standards: ISO 9001 certification required for bidder or OEM
-
- Financial: Positive net worth; minimum average turnover for last 3 years as per bid document
-
- Delivery: 25% variation permitted; delivery period adjustments defined by option clause
Terms & Conditions
-
Option clause allows ±25% quantity changes at contracted rates with time adjustments
-
EMD payable via DD to CWE; scanned copy required; hardcopy due within 5 days
-
ISO 9001 certification mandatory; positive net worth and three-year turnover evidence required
Important Clauses
Payment Terms
No explicit payment terms stated in the summary; emphasis on EMD submission and delivery-related terms per contract
Delivery Schedule
Delivery period to commence from the last date of original delivery order; option extension based on quantity variance with minimum 30 days
Penalties/Liquidated Damages
No explicit LD details provided in the summary; contract may include penalties as per standard Army procurement terms
Bidder Eligibility
-
Positive net worth as per last audited financial statement
-
ISO 9001 certification for bidder or OEM
-
Minimum average turnover for last 3 years as per bid document
-
Submission of EMD via DD and required documentation
Tender Data
Bid Details
Quantity
9363
Category
Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1)
Bid Type
Two Packet Bid
Bid Validity
90 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
50% Lowest Priced Technically Qualified Bidders
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Past Performance
50 %
Warranty Period
3 days
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
3
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Nilgiris
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Nilgiris | Nilgiris | - | - | 16 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9948690.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
114 Items Sign in to view GEM price trends Sign in for GEM prices
STAINLESS STEEL KITCHEN SINK WITH DRAIN BOARD 37 INCH X 18 INCH X 8 MM THICK
STAINLESS STEEL KITCHEN SINK WITH DRAIN BOARD 37 INCH X 18 INCH X 8 MM THICK
ALUMINIUM ALDROP OR SLIDING BOLT 300MM
ALUMINIUM ALDROP OR SLIDING BOLT 300MM
MS TOWER BOLT 100 MM
MS TOWER BOLT 100 MM
MS TOWER BOLT 150 MM
MS TOWER BOLT 150 MM
ALUMINIUM CURTAIN ROD 15 MM
ALUMINIUM CURTAIN ROD 15 MM
ALUMINIUM CURTAIN ROD 20MM DIA OF 3.66 MTRS LONG
ALUMINIUM CURTAIN ROD 20MM DIA OF 3.66 MTRS LONG
ALUMINIUM CURTAIN BRACKET 20 MM
ALUMINIUM CURTAIN BRACKET 20 MM
ALUMINIUM FLOOR DOOR STOPPER 50MM SINGLE
ALUMINIUM FLOOR DOOR STOPPER 50MM SINGLE
CORNER GLASS SHELF
CORNER GLASS SHELF
GLASS SHELVES FOR BATH ROOM
GLASS SHELVES FOR BATH ROOM
CP WASTE COUPLING 40 MM DIA FOR KITCHEN SINK
CP WASTE COUPLING 40 MM DIA FOR KITCHEN SINK
CPVC COUPLING 15 MM
CPVC COUPLING 15 MM
CPVC COUPLING 25 MM
CPVC COUPLING 25 MM
EWC WITH P TRAP ISI MARKED
EWC WITH P TRAP ISI MARKED
EWC WITH S TRAP ISI MARKED
EWC WITH S TRAP ISI MARKED
IWC WITH S TRAP ISI MARKED
IWC WITH S TRAP ISI MARKED
WASH HAND BASIN CERAMIC TYPE SIZE LARGE 550X400MM
WASH HAND BASIN CERAMIC TYPE SIZE LARGE 550X400MM
WASH HAND BASIN OF SIZE 450 X 300MM CEREAMIC TYPE
WASH HAND BASIN OF SIZE 450 X 300MM CEREAMIC TYPE
GI BEND 20MM
GI BEND 20MM
GI BEND 25MM
GI BEND 25MM
GI BEND 50 MM
GI BEND 50 MM
GI ELBOW 20MM
GI ELBOW 20MM
GI ELBOW 25MM
GI ELBOW 25MM
GI ELBOW 40MM
GI ELBOW 40MM
GI ELBOW 50MM
GI ELBOW 50MM
GI ELBOW 80 MM
GI ELBOW 80 MM
GI ELBOW REDUCER 15 MM X 20 MM
GI ELBOW REDUCER 15 MM X 20 MM
GI ELBOW REDUCER 15MM X 25MM
GI ELBOW REDUCER 15MM X 25MM
GI ELBOW REDUCER 15MM X 40MM
GI ELBOW REDUCER 15MM X 40MM
GI ELBOW REDUCER 20 MM X 25MM
GI ELBOW REDUCER 20 MM X 25MM
GI ELBOW REDUCER 20MM X 40MM
GI ELBOW REDUCER 20MM X 40MM
GI HEXAGONAL NIPPLE 20MM
GI HEXAGONAL NIPPLE 20MM
GI HEXAGONAL NIPPLE 25MM
GI HEXAGONAL NIPPLE 25MM
GI HEXAGONAL NIPPLE 50MM
GI HEXAGONAL NIPPLE 50MM
GI NIPPLE 50MM
GI NIPPLE 50MM
GI PLUG 20MM
GI PLUG 20MM
GI PLUG 25MM
GI PLUG 25MM
GI PLUG 40 MM
GI PLUG 40 MM
GI PLUG 50 MM
GI PLUG 50 MM
GI SOCKET 20 MM
GI SOCKET 20 MM
GI SOCKET 25MM
GI SOCKET 25MM
GI SOCKET 40MM
GI SOCKET 40MM
GI SOCKET 50MM
GI SOCKET 50MM
GI SOCKET REDUCING 15MM X 20MM
GI SOCKET REDUCING 15MM X 20MM
GI SOCKET REDUCING 15MM X 25MM
GI SOCKET REDUCING 15MM X 25MM
GI SOCKET REDUCING 15MM X 40MM
GI SOCKET REDUCING 15MM X 40MM
GI SOCKET REDUCING 25MM X 20 MM
GI SOCKET REDUCING 25MM X 20 MM
GI SOCKET REDUCING 20MM X 40MM
GI SOCKET REDUCING 20MM X 40MM
GI TEE EQUAL 15MM
GI TEE EQUAL 15MM
GI TEE EQUAL 20MM
GI TEE EQUAL 20MM
GI TEE EQUAL 25MM
GI TEE EQUAL 25MM
GI TEE REDUCER 15MM X20MM
GI TEE REDUCER 15MM X20MM
GI TEE REDUCER 15MM X 25MM
GI TEE REDUCER 15MM X 25MM
GI TEE REDUCER 15MM X 40MM
GI TEE REDUCER 15MM X 40MM
GI TEE REDUCER 25MM X 20MM
GI TEE REDUCER 25MM X 20MM
GI TEE REDUCER 20MM X 40MM
GI TEE REDUCER 20MM X 40MM
GI TEE REDUCER 20MM X 50MM
GI TEE REDUCER 20MM X 50MM
GI TEE REDUCER 25MM X 50MM
GI TEE REDUCER 25MM X 50MM
GI UNION SOCKET 15 MM
GI UNION SOCKET 15 MM
GI UNION SOCKET 20 MM
GI UNION SOCKET 20 MM
GI UNION SOCKET 25 MM
GI UNION SOCKET 25 MM
GI UNION SOCKET 40 MM
GI UNION SOCKET 40 MM
GI UNION SOCKET 50 MM
GI UNION SOCKET 50 MM
GI PIPE MED GRADE ISI MARKED 50 MM BORE
GI PIPE MED GRADE ISI MARKED 50 MM BORE
GI PIPE MED GRADE ISI MARKED 80 MM BORE
GI PIPE MED GRADE ISI MARKED 80 MM BORE
AL ANODISED WIRE MESH STEEL WIRE GAUGE
AL ANODISED WIRE MESH STEEL WIRE GAUGE
CPVC ELBOW 15 MM
CPVC ELBOW 15 MM
CPVC ELBOW 25 MM
CPVC ELBOW 25 MM
CPVC MTA ADAPTOR 20 MM
CPVC MTA ADAPTOR 20 MM
CPVC MTA ADAPTOR 25 MM
CPVC MTA ADAPTOR 25 MM
CPVC FTA ADAPTOR 20 MM
CPVC FTA ADAPTOR 20 MM
CPVC FTA ADAPTOR 25 MM
CPVC FTA ADAPTOR 25 MM
CPVC TEE 20 MM
CPVC TEE 20 MM
CPVC TEE 25 MM
CPVC TEE 25 MM
ALUM SULPHATE
ALUM SULPHATE
BLEACHING POWDER
BLEACHING POWDER
PUTTY FOR WINDOW FRAME
PUTTY FOR WINDOW FRAME
LOOKING MIRROR 430 X 330 MM
LOOKING MIRROR 430 X 330 MM
PVC CONNECTION 15MM x 600 MM WITH BRASS UNION ON BOTH ENDS HOT WATER
PVC CONNECTION 15MM x 600 MM WITH BRASS UNION ON BOTH ENDS HOT WATER
PVC WASTE PIPE 32 MM DIA AND 750MM FOR WBH
PVC WASTE PIPE 32 MM DIA AND 750MM FOR WBH
PVC WATER STORAGE TANK TRIPLE LAYER OF 500 LTRS
PVC WATER STORAGE TANK TRIPLE LAYER OF 500 LTRS
PVC WATER STORAGE TANK TRIPLE LAYER OF 1000 LTRS
PVC WATER STORAGE TANK TRIPLE LAYER OF 1000 LTRS
ADHESIVE S H PASTE
ADHESIVE S H PASTE
FOAM CUSHION OF SIZE 22 INCH X21 INCH X100 MM THICK HAVING 40 D
FOAM CUSHION OF SIZE 22 INCH X21 INCH X100 MM THICK HAVING 40 D
KNOB FOR DRAWER WITH SCREW
KNOB FOR DRAWER WITH SCREW
LOOKING MIRROR 1220X380X5MM FOR TABLE DRESSING LADIES
LOOKING MIRROR 1220X380X5MM FOR TABLE DRESSING LADIES
MIRROR FOR TABLE DRESSING GENTS 1115 X 510 X 5.5MM
MIRROR FOR TABLE DRESSING GENTS 1115 X 510 X 5.5MM
PRELAMINATED PARTICLE BOARD 8 Feet X4 Feet X18MM
PRELAMINATED PARTICLE BOARD 8 Feet X4 Feet X18MM
PLYWOOD BWR 7 Feet X 3 Feet X 12MM
PLYWOOD BWR 7 Feet X 3 Feet X 12MM
PLYWOOD BWR 8 Feet X 4 Feet X 6MM
PLYWOOD BWR 8 Feet X 4 Feet X 6MM
EMARY PAPER 120 GRIT
EMARY PAPER 120 GRIT
STAR SCREW 25 MM
STAR SCREW 25 MM
STAR SCREW 80 MM
STAR SCREW 80 MM
SYNTHETIC ENAMEL PAINT NAVY BLUE COLOUR
SYNTHETIC ENAMEL PAINT NAVY BLUE COLOUR
SYNTHETIC ENAMEL PAINT WHITE COLOUR
SYNTHETIC ENAMEL PAINT WHITE COLOUR
SYNTHETIC ENAMEL PAINT BLACK COLOUR
SYNTHETIC ENAMEL PAINT BLACK COLOUR
FRENCH POLISH
FRENCH POLISH
BRASS PENDENT HOLDER
BRASS PENDENT HOLDER
ELECTRONIC STEP REGULATOR FOR CEILING FAN MODULAR
ELECTRONIC STEP REGULATOR FOR CEILING FAN MODULAR
LED LAMP 7 WATT
LED LAMP 7 WATT
LED BATTEN 1 X 6W
LED BATTEN 1 X 6W
DRIVER FOR STREET LIGHT 10 W
DRIVER FOR STREET LIGHT 10 W
DRIVER FOR STREET LIGHT 24 W
DRIVER FOR STREET LIGHT 24 W
PVC CASSING CAPING 20MM WIDTH X 2 MTR
PVC CASSING CAPING 20MM WIDTH X 2 MTR
PVC CASSING CAPING 25MM WIDTH X 2 MTR
PVC CASSING CAPING 25MM WIDTH X 2 MTR
PVC CONDUIT PIPE 20MM DIA X 3 MTR LONG
PVC CONDUIT PIPE 20MM DIA X 3 MTR LONG
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 1.5SQMM
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 1.5SQMM
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 4 SQMM
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 4 SQMM
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 6 SQMM
PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 6 SQMM
PVC INSULATED UNARMOURED COPPER CABLE 3 CORE X 1.5 SQMM
PVC INSULATED UNARMOURED COPPER CABLE 3 CORE X 1.5 SQMM
PLUG TOP 15 or 16 AMPS 3 PIN
PLUG TOP 15 or 16 AMPS 3 PIN
PLUG TOP 5 or 6 AMPS 3 PIN
PLUG TOP 5 or 6 AMPS 3 PIN
SWTICH SOCKET COMBINATION 15 or 16 AMPS 5 or 6 PIN
SWTICH SOCKET COMBINATION 15 or 16 AMPS 5 or 6 PIN
THERMOSTAT FOR GEYSER 10 to 90 DEGREE
THERMOSTAT FOR GEYSER 10 to 90 DEGREE
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | STAINLESS STEEL KITCHEN SINK WITH DRAIN BOARD 37 INCH X 18 INCH X 8 MM THICK | STAINLESS STEEL KITCHEN SINK WITH DRAIN BOARD 37 INCH X 18 INCH X 8 MM THICK | 4 | nos | agei-18 | 30 | |
| 2 | ALUMINIUM ALDROP OR SLIDING BOLT 300MM | ALUMINIUM ALDROP OR SLIDING BOLT 300MM | 24 | nos | agei-18 | 30 | |
| 3 | MS TOWER BOLT 100 MM | MS TOWER BOLT 100 MM | 4 | nos | agei-18 | 30 | |
| 4 | MS TOWER BOLT 150 MM | MS TOWER BOLT 150 MM | 23 | nos | agei-18 | 30 | |
| 5 | ALUMINIUM CURTAIN ROD 15 MM | ALUMINIUM CURTAIN ROD 15 MM | 15 | nos | agei-18 | 30 | |
| 6 | ALUMINIUM CURTAIN ROD 20MM DIA OF 3.66 MTRS LONG | ALUMINIUM CURTAIN ROD 20MM DIA OF 3.66 MTRS LONG | 100 | nos | agei-18 | 30 | |
| 7 | ALUMINIUM CURTAIN BRACKET 20 MM | ALUMINIUM CURTAIN BRACKET 20 MM | 400 | nos | agei-18 | 30 | |
| 8 | ALUMINIUM FLOOR DOOR STOPPER 50MM SINGLE | ALUMINIUM FLOOR DOOR STOPPER 50MM SINGLE | 30 | nos | agei-18 | 30 | |
| 9 | CORNER GLASS SHELF | CORNER GLASS SHELF | 49 | nos | agei-18 | 30 | |
| 10 | GLASS SHELVES FOR BATH ROOM | GLASS SHELVES FOR BATH ROOM | 1 | nos | agei-18 | 30 | |
| 11 | CP WASTE COUPLING 40 MM DIA FOR KITCHEN SINK | CP WASTE COUPLING 40 MM DIA FOR KITCHEN SINK | 4 | nos | agei-18 | 30 | |
| 12 | CPVC COUPLING 15 MM | CPVC COUPLING 15 MM | 34 | nos | agei-18 | 30 | |
| 13 | CPVC COUPLING 25 MM | CPVC COUPLING 25 MM | 35 | nos | agei-18 | 30 | |
| 14 | EWC WITH P TRAP ISI MARKED | EWC WITH P TRAP ISI MARKED | 10 | nos | agei-18 | 30 | |
| 15 | EWC WITH S TRAP ISI MARKED | EWC WITH S TRAP ISI MARKED | 25 | nos | agei-18 | 30 | |
| 16 | IWC WITH S TRAP ISI MARKED | IWC WITH S TRAP ISI MARKED | 8 | nos | agei-18 | 30 | |
| 17 | WASH HAND BASIN CERAMIC TYPE SIZE LARGE 550X400MM | WASH HAND BASIN CERAMIC TYPE SIZE LARGE 550X400MM | 15 | nos | agei-18 | 30 | |
| 18 | WASH HAND BASIN OF SIZE 450 X 300MM CEREAMIC TYPE | WASH HAND BASIN OF SIZE 450 X 300MM CEREAMIC TYPE | 7 | nos | agei-18 | 30 | |
| 19 | GI BEND 20MM | GI BEND 20MM | 10 | nos | agei-18 | 30 | |
| 20 | GI BEND 25MM | GI BEND 25MM | 5 | nos | agei-18 | 30 | |
| 21 | GI BEND 50 MM | GI BEND 50 MM | 5 | nos | agei-18 | 30 | |
| 22 | GI ELBOW 20MM | GI ELBOW 20MM | 5 | nos | agei-18 | 30 | |
| 23 | GI ELBOW 25MM | GI ELBOW 25MM | 5 | nos | agei-18 | 30 | |
| 24 | GI ELBOW 40MM | GI ELBOW 40MM | 10 | nos | agei-18 | 30 | |
| 25 | GI ELBOW 50MM | GI ELBOW 50MM | 10 | nos | agei-18 | 30 | |
| 26 | GI ELBOW 80 MM | GI ELBOW 80 MM | 10 | nos | agei-18 | 30 | |
| 27 | GI ELBOW REDUCER 15 MM X 20 MM | GI ELBOW REDUCER 15 MM X 20 MM | 5 | nos | agei-18 | 30 | |
| 28 | GI ELBOW REDUCER 15MM X 25MM | GI ELBOW REDUCER 15MM X 25MM | 5 | nos | agei-18 | 30 | |
| 29 | GI ELBOW REDUCER 15MM X 40MM | GI ELBOW REDUCER 15MM X 40MM | 5 | nos | agei-18 | 30 | |
| 30 | GI ELBOW REDUCER 20 MM X 25MM | GI ELBOW REDUCER 20 MM X 25MM | 5 | nos | agei-18 | 30 | |
| 31 | GI ELBOW REDUCER 20MM X 40MM | GI ELBOW REDUCER 20MM X 40MM | 5 | nos | agei-18 | 30 | |
| 32 | GI HEXAGONAL NIPPLE 20MM | GI HEXAGONAL NIPPLE 20MM | 5 | nos | agei-18 | 30 | |
| 33 | GI HEXAGONAL NIPPLE 25MM | GI HEXAGONAL NIPPLE 25MM | 5 | nos | agei-18 | 30 | |
| 34 | GI HEXAGONAL NIPPLE 50MM | GI HEXAGONAL NIPPLE 50MM | 5 | nos | agei-18 | 30 | |
| 35 | GI NIPPLE 50MM | GI NIPPLE 50MM | 5 | nos | agei-18 | 30 | |
| 36 | GI PLUG 20MM | GI PLUG 20MM | 5 | nos | agei-18 | 30 | |
| 37 | GI PLUG 25MM | GI PLUG 25MM | 5 | nos | agei-18 | 30 | |
| 38 | GI PLUG 40 MM | GI PLUG 40 MM | 5 | nos | agei-18 | 30 | |
| 39 | GI PLUG 50 MM | GI PLUG 50 MM | 5 | nos | agei-18 | 30 | |
| 40 | GI SOCKET 20 MM | GI SOCKET 20 MM | 5 | nos | agei-18 | 30 | |
| 41 | GI SOCKET 25MM | GI SOCKET 25MM | 10 | nos | agei-18 | 30 | |
| 42 | GI SOCKET 40MM | GI SOCKET 40MM | 10 | nos | agei-18 | 30 | |
| 43 | GI SOCKET 50MM | GI SOCKET 50MM | 10 | nos | agei-18 | 30 | |
| 44 | GI SOCKET REDUCING 15MM X 20MM | GI SOCKET REDUCING 15MM X 20MM | 5 | nos | agei-18 | 30 | |
| 45 | GI SOCKET REDUCING 15MM X 25MM | GI SOCKET REDUCING 15MM X 25MM | 5 | nos | agei-18 | 30 | |
| 46 | GI SOCKET REDUCING 15MM X 40MM | GI SOCKET REDUCING 15MM X 40MM | 5 | nos | agei-18 | 30 | |
| 47 | GI SOCKET REDUCING 25MM X 20 MM | GI SOCKET REDUCING 25MM X 20 MM | 5 | nos | agei-18 | 30 | |
| 48 | GI SOCKET REDUCING 20MM X 40MM | GI SOCKET REDUCING 20MM X 40MM | 5 | nos | agei-18 | 30 | |
| 49 | GI TEE EQUAL 15MM | GI TEE EQUAL 15MM | 10 | nos | agei-18 | 30 | |
| 50 | GI TEE EQUAL 20MM | GI TEE EQUAL 20MM | 10 | nos | agei-18 | 30 | |
| 51 | GI TEE EQUAL 25MM | GI TEE EQUAL 25MM | 10 | nos | agei-18 | 30 | |
| 52 | GI TEE REDUCER 15MM X20MM | GI TEE REDUCER 15MM X20MM | 10 | nos | agei-18 | 30 | |
| 53 | GI TEE REDUCER 15MM X 25MM | GI TEE REDUCER 15MM X 25MM | 10 | nos | agei-18 | 30 | |
| 54 | GI TEE REDUCER 15MM X 40MM | GI TEE REDUCER 15MM X 40MM | 10 | nos | agei-18 | 30 | |
| 55 | GI TEE REDUCER 25MM X 20MM | GI TEE REDUCER 25MM X 20MM | 10 | nos | agei-18 | 30 | |
| 56 | GI TEE REDUCER 20MM X 40MM | GI TEE REDUCER 20MM X 40MM | 5 | nos | agei-18 | 30 | |
| 57 | GI TEE REDUCER 20MM X 50MM | GI TEE REDUCER 20MM X 50MM | 5 | nos | agei-18 | 30 | |
| 58 | GI TEE REDUCER 25MM X 50MM | GI TEE REDUCER 25MM X 50MM | 5 | nos | agei-18 | 30 | |
| 59 | GI UNION SOCKET 15 MM | GI UNION SOCKET 15 MM | 5 | nos | agei-18 | 30 | |
| 60 | GI UNION SOCKET 20 MM | GI UNION SOCKET 20 MM | 5 | nos | agei-18 | 30 | |
| 61 | GI UNION SOCKET 25 MM | GI UNION SOCKET 25 MM | 10 | nos | agei-18 | 30 | |
| 62 | GI UNION SOCKET 40 MM | GI UNION SOCKET 40 MM | 10 | nos | agei-18 | 30 | |
| 63 | GI UNION SOCKET 50 MM | GI UNION SOCKET 50 MM | 10 | nos | agei-18 | 30 | |
| 64 | GI PIPE MED GRADE ISI MARKED 50 MM BORE | GI PIPE MED GRADE ISI MARKED 50 MM BORE | 5 | rm | agei-18 | 30 | |
| 65 | GI PIPE MED GRADE ISI MARKED 80 MM BORE | GI PIPE MED GRADE ISI MARKED 80 MM BORE | 5 | rm | agei-18 | 30 | |
| 66 | AL ANODISED WIRE MESH STEEL WIRE GAUGE | AL ANODISED WIRE MESH STEEL WIRE GAUGE | 4 | roll | agei-18 | 30 | |
| 67 | CPVC ELBOW 15 MM | CPVC ELBOW 15 MM | 30 | nos | agei-18 | 30 | |
| 68 | CPVC ELBOW 25 MM | CPVC ELBOW 25 MM | 32 | nos | agei-18 | 30 | |
| 69 | CPVC MTA ADAPTOR 20 MM | CPVC MTA ADAPTOR 20 MM | 37 | nos | agei-18 | 30 | |
| 70 | CPVC MTA ADAPTOR 25 MM | CPVC MTA ADAPTOR 25 MM | 39 | nos | agei-18 | 30 | |
| 71 | CPVC FTA ADAPTOR 20 MM | CPVC FTA ADAPTOR 20 MM | 41 | nos | agei-18 | 30 | |
| 72 | CPVC FTA ADAPTOR 25 MM | CPVC FTA ADAPTOR 25 MM | 42 | nos | agei-18 | 30 | |
| 73 | CPVC TEE 20 MM | CPVC TEE 20 MM | 44 | nos | agei-18 | 30 | |
| 74 | CPVC TEE 25 MM | CPVC TEE 25 MM | 46 | nos | agei-18 | 30 | |
| 75 | ALUM SULPHATE | ALUM SULPHATE | 149 | kgs | agei-18 | 30 | |
| 76 | BLEACHING POWDER | BLEACHING POWDER | 124 | kgs | agei-18 | 30 | |
| 77 | PUTTY FOR WINDOW FRAME | PUTTY FOR WINDOW FRAME | 50 | kg | agei-18 | 30 | |
| 78 | LOOKING MIRROR 430 X 330 MM | LOOKING MIRROR 430 X 330 MM | 3 | nos | agei-18 | 30 | |
| 79 | PVC CONNECTION 15MM x 600 MM WITH BRASS UNION ON BOTH ENDS HOT WATER | PVC CONNECTION 15MM x 600 MM WITH BRASS UNION ON BOTH ENDS HOT WATER | 6 | nos | agei-18 | 30 | |
| 80 | PVC WASTE PIPE 32 MM DIA AND 750MM FOR WBH | PVC WASTE PIPE 32 MM DIA AND 750MM FOR WBH | 150 | nos | agei-18 | 30 | |
| 81 | PVC WATER STORAGE TANK TRIPLE LAYER OF 500 LTRS | PVC WATER STORAGE TANK TRIPLE LAYER OF 500 LTRS | 5 | nos | agei-18 | 30 | |
| 82 | PVC WATER STORAGE TANK TRIPLE LAYER OF 1000 LTRS | PVC WATER STORAGE TANK TRIPLE LAYER OF 1000 LTRS | 5 | nos | agei-18 | 30 | |
| 83 | ADHESIVE S H PASTE | ADHESIVE S H PASTE | 34 | ltr | agei-18 | 30 | |
| 84 | FOAM CUSHION OF SIZE 22 INCH X21 INCH X100 MM THICK HAVING 40 D | FOAM CUSHION OF SIZE 22 INCH X21 INCH X100 MM THICK HAVING 40 D | 73 | nos | agei-18 | 30 | |
| 85 | KNOB FOR DRAWER WITH SCREW | KNOB FOR DRAWER WITH SCREW | 62 | nos | agei-18 | 30 | |
| 86 | LOOKING MIRROR 1220X380X5MM FOR TABLE DRESSING LADIES | LOOKING MIRROR 1220X380X5MM FOR TABLE DRESSING LADIES | 9 | nos | agei-18 | 30 | |
| 87 | MIRROR FOR TABLE DRESSING GENTS 1115 X 510 X 5.5MM | MIRROR FOR TABLE DRESSING GENTS 1115 X 510 X 5.5MM | 10 | nos | agei-18 | 30 | |
| 88 | PRELAMINATED PARTICLE BOARD 8 Feet X4 Feet X18MM | PRELAMINATED PARTICLE BOARD 8 Feet X4 Feet X18MM | 17 | nos | agei-18 | 30 | |
| 89 | PLYWOOD BWR 7 Feet X 3 Feet X 12MM | PLYWOOD BWR 7 Feet X 3 Feet X 12MM | 36 | nos | agei-18 | 30 | |
| 90 | PLYWOOD BWR 8 Feet X 4 Feet X 6MM | PLYWOOD BWR 8 Feet X 4 Feet X 6MM | 7 | nos | agei-18 | 30 | |
| 91 | EMARY PAPER 120 GRIT | EMARY PAPER 120 GRIT | 26 | nos | agei-18 | 30 | |
| 92 | STAR SCREW 25 MM | STAR SCREW 25 MM | 3 | kg | agei-18 | 30 | |
| 93 | STAR SCREW 80 MM | STAR SCREW 80 MM | 3 | kgs | agei-18 | 30 | |
| 94 | SYNTHETIC ENAMEL PAINT NAVY BLUE COLOUR | SYNTHETIC ENAMEL PAINT NAVY BLUE COLOUR | 8 | ltr | agei-18 | 30 | |
| 95 | SYNTHETIC ENAMEL PAINT WHITE COLOUR | SYNTHETIC ENAMEL PAINT WHITE COLOUR | 8 | ltr | agei-18 | 30 | |
| 96 | SYNTHETIC ENAMEL PAINT BLACK COLOUR | SYNTHETIC ENAMEL PAINT BLACK COLOUR | 4 | ltr | agei-18 | 30 | |
| 97 | FRENCH POLISH | FRENCH POLISH | 30 | ltr | agei-18 | 30 | |
| 98 | BRASS PENDENT HOLDER | BRASS PENDENT HOLDER | 4 | nos | agei-18 | 30 | |
| 99 | ELECTRONIC STEP REGULATOR FOR CEILING FAN MODULAR | ELECTRONIC STEP REGULATOR FOR CEILING FAN MODULAR | 33 | nos | agei-18 | 30 | |
| 100 | LED LAMP 7 WATT | LED LAMP 7 WATT | 15 | nos | agei-18 | 30 | |
| 101 | LED BATTEN 1 X 6W | LED BATTEN 1 X 6W | 15 | nos | agei-18 | 30 | |
| 102 | DRIVER FOR STREET LIGHT 10 W | DRIVER FOR STREET LIGHT 10 W | 10 | nos | agei-18 | 30 | |
| 103 | DRIVER FOR STREET LIGHT 24 W | DRIVER FOR STREET LIGHT 24 W | 30 | nos | agei-18 | 30 | |
| 104 | PVC CASSING CAPING 20MM WIDTH X 2 MTR | PVC CASSING CAPING 20MM WIDTH X 2 MTR | 10 | nos | agei-18 | 30 | |
| 105 | PVC CASSING CAPING 25MM WIDTH X 2 MTR | PVC CASSING CAPING 25MM WIDTH X 2 MTR | 10 | nos | agei-18 | 30 | |
| 106 | PVC CONDUIT PIPE 20MM DIA X 3 MTR LONG | PVC CONDUIT PIPE 20MM DIA X 3 MTR LONG | 40 | nos | agei-18 | 30 | |
| 107 | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 1.5SQMM | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 1.5SQMM | 46 | rm | agei-18 | 30 | |
| 108 | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 4 SQMM | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 4 SQMM | 47 | rm | agei-18 | 30 | |
| 109 | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 6 SQMM | PVC INSULATED UNARMOURED COPPER CABLE 2 CORE X 6 SQMM | 43 | rm | agei-18 | 30 | |
| 110 | PVC INSULATED UNARMOURED COPPER CABLE 3 CORE X 1.5 SQMM | PVC INSULATED UNARMOURED COPPER CABLE 3 CORE X 1.5 SQMM | 105 | rm | agei-18 | 30 | |
| 111 | PLUG TOP 15 or 16 AMPS 3 PIN | PLUG TOP 15 or 16 AMPS 3 PIN | 5 | nos | agei-18 | 30 | |
| 112 | PLUG TOP 5 or 6 AMPS 3 PIN | PLUG TOP 5 or 6 AMPS 3 PIN | 5 | nos | agei-18 | 30 | |
| 113 | SWTICH SOCKET COMBINATION 15 or 16 AMPS 5 or 6 PIN | SWTICH SOCKET COMBINATION 15 or 16 AMPS 5 or 6 PIN | 22 | nos | agei-18 | 30 | |
| 114 | THERMOSTAT FOR GEYSER 10 to 90 DEGREE | THERMOSTAT FOR GEYSER 10 to 90 DEGREE | 5 | nos | agei-18 | 30 |
Categories
93
Required Documents
GST registration certificate
Permanent Account Number (PAN) card
Experience certificates for similar supply
Audited financial statements for last 3 years or CA certificate on turnover
ISO 9001 certificate ( bidder or OEM )
Technical bid documents and product compliance certificates
OEM authorization letters (if bidding as OEM or on behalf of OEM)
EMD via Demand Draft in favour of CWE; scanned copy uploaded; hardcopy to be delivered within 5 days
Frequently Asked Questions
Key insights about TAMIL NADU tender market
How to bid in the Indian Army goods supply tender in Coimbatore Tamil Nadu 2026
Bidders must meet eligibility criteria: positive net worth, ISO 9001 certification, and three-year turnover evidence. Submit GST, PAN, experience certificates, audited statements, and OEM authorizations. EMD via Demand Draft payable to CWE with scanned copy uploaded; hardcopy due within 5 days.
What documents are required for Indian Army Coimbatore tender submission 2026
Required documents include GST certificate, PAN, three-year turnover evidence (audited or CA certificate), ISO 9001 certificate (bidder or OEM), experience certificates for similar work, OEM authorization if applicable, and EMD proof with DD payable to CWE; submit scanned copies and deliver hardcopy within 5 days.
What are the delivery and quantity variation terms in this Army tender
Quantity may vary up to 25% of bid quantity during and after award at contracted rates. Delivery period starts from the last date of original order; extended period calculations use (increased quantity/ original quantity) × original period, with a minimum of 30 days.
Which standard certifications are mandatory for bidders in this Coimbatore bid
Mandatory ISO 9001 certification for the bidder or the OEM of the offered products. Positive net worth and turnover documentation are required, with evidence provided as audited balance sheets or CA certificates for the last three years.
When is the EMD submission deadline and DD requirements for this tender
EMD must be submitted as an Account Payee Demand Draft in favor of CWE; scanned copy uploaded at bid submission, with the physical DD delivered within 5 days of bid end date. Ensure DD is payable at the relevant city noted by CWE.
What is the scope of supply for this Indian Army tender in Tamil Nadu
Scope is limited to supply of goods as per the BOQ; total items listed are 114, but item-wise quantities are not disclosed in the public summary. Ensure compliance with post-receipt inspection by the Board at the consignee site.
What are the inspection procedures for this tender in Coimbatore
Inspection is conducted post-receipt by the Board at the consignee site. Pre-dispatch inspection is not clearly indicated in the available terms. Bidder should anticipate post-delivery checks and provide ready documentation for inspection.
What certificates are required to avoid rejection in this Army procurement
Failing to upload required certificates can lead to rejection. Required items include ISO 9001, turnover proof, GST, PAN, and relevant OEM authorizations. Ensure all documents align with the bid document and any ATC or corrigendum.