TenderDekho Logo
Closed GEM

Armed Forces Tribunal procurement tender Kinnaur Himachal Pradesh 2026 – Installation & Data Sheet Compliance

Bid Publish Date

10-Aug-2026, 9:01 pm

Bid End Date

21-Aug-2026, 7:00 pm

Location

KINNAUR , HIMACHAL PRADESH
Generate Docs

Progress

Issue10-Aug-2026, 9:01 pm
Technical21-08-2026 17:24:47
Financial
AwardCompleted

Tender Overview

The opportunity comes from the Armed Forces Tribunal, under the Department Of Defence, for procurement in KINNAUR, HIMACHAL PRADESH (172103). The exact product category is not disclosed; however, the bid requires OEM installation/commissioning capabilities, dataSheet verification, and vendor code creation, with multiple delivery locations listed by the buyer. The contract contemplates a significant quantity potential (BOQ lists 129 items) and a flexible quantity clause up to 50% increase/decrease, under a single contract framework. The emphasis is on ensuring product data sheet alignment with offered specifications and authorized OEM participation. The bidders must ensure non-obsolescence (minimum 6 years residual market life) and compliance with statutory GST practices. The procurement’s unique element is the need for OEM-certified installation resources and robust data sheet matching for technical verification, with delivery obligations tied to multiple discreet locations as per buyer discretion.

Technical Specifications & Requirements

  • Data Sheet submission is mandatory and must align with the product specifications offered.
  • OEM authorization or authorized reseller/ distributor credentials are required.
  • Installation, commissioning, testing, and training (if applicable) must be performed by OEM or OEM-certified personnel.
  • Data integrity check is mandatory; mismatches can lead to bid rejection.
  • The buyer reserves the right to increase/decrease quantity up to 50% and modify delivery timelines accordingly.
  • GST considerations will be based on actual rates or quoted GST, whichever is lower.

Terms, Conditions & Eligibility

  • EMD details are not specified in the snippet; bidders must verify at submission.
  • Required documents include PAN, GSTIN, cancelled cheque, EFT mandate, and vendor code creation documents.
  • Data Sheet alignment, OEM authorization, and installation capabilities are mandatory.
  • Supplier should avoid obsolescence and demonstrate 6+ years market life for offered items.
  • Delivery/installation locations are defined by buyer discretion across multiple sites.
  • Termination rights, extension rights, and payment terms are subject to standard GEM conditions.

Key Specifications

    • Data Sheet alignment with offered product specifications
    • OEM authorization or OEM-certified reseller documentation
    • Installation, commissioning, testing, and training by OEM/OEM-certified personnel
    • Notional quantity flexibility up to 50% (increase/decrease) of bid quantity
    • GST compliance: actual or quoted GST rate, whichever is lower
    • Delivery locations defined by buyer discretion across multiple sites

Terms & Conditions

  • Key Term 1: Option Clause allows +/- 50% quantity change at contract placement and during currency

  • Key Term 2: Data Sheet verification; mismatches may lead to rejection

  • Key Term 3: OEM authorization required for installation/comissioning

Important Clauses

Payment Terms

GST handling per actuals or lower quoted rate; no explicit EMI amount provided in data

Delivery Schedule

Delivery period subject to extension based on quantity variation; last date of original delivery order used for extended delivery

Penalties/Liquidated Damages

Not specified in available data; standard tender penalties may apply per buyer terms

Bidder Eligibility

  • No liquidation, court receivership, or bankruptcy proceedings

  • Non-obsolescence with minimum 6 years residual market life

  • OEM authorization or OEM-certified installation capability

Authority & Contact

Organization

Armed Forces Tribunal

Department

Department of Defence

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Technical Results

S.No Seller Item Date Status
1
A. Y. INDUSTRIES   Under PMA
-21-08-2026 17:24:47
2
FAIR DEAL TRADERS   Under PMA
-20-08-2026 23:30:37
3
GS Innovations   Under PMA
-21-08-2026 13:47:10
4
HARYANA SUPPLY AGENCIES   Under PMA
-21-08-2026 15:53:44
5
PLASTECO POLYTECH PRIVATE LIMITED   Under PMA
-21-08-2026 11:45:27
6
Triveni Sales Corporation   Under PMA
-21-08-2026 15:13:35
7
UNIFAB DEFENCE PRIVATE LIMITED   Under PMA
-21-08-2026 15:16:05
8
UNIVERSAL FABRICATORS   Under PMA
-21-08-2026 11:09:07

Financial Results

Rank Seller Price Item
L1
A. Y. INDUSTRIES( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L2
FAIR DEAL TRADERS( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L3
PLASTECO POLYTECH PRIVATE LIMITED( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L4
UNIVERSAL FABRICATORS( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L5
HARYANA SUPPLY AGENCIES( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L6
UNIFAB DEFENCE PRIVATE LIMITED( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,

Tender Data

Bid Details

Quantity

174577

Category

Crushed stone aggregate 20mm

Bid Type

Two Packet Bid

Bid Validity

180 (Days)

Bid Type

Service

Evaluation

Total value wise evaluation

Inspection Required

No

Tech Clarification Time

2 Days

Preference & Exemptions

EMD Required

No

MSE Exemption/Relaxation

No

Startup Exemption/Relaxation

No

Bid Splitting Applied

No

Requirements

Past Performance

50 %

Warranty Period

10 days

Arbitration Clause

No

Mediation Clause

No

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

No

Bid To RA Enabled

No

Advisory Bank

State Bank of India

ePBG Percentage

5%

ePBG Duration (Months)

12

Pre-Bid & Qualification

Pre-Bid Date

15-08-2026 11:00:00

Pre-Bid Venue

ENGINEER PLANNING OFFICER 426(I) FD COY MOB:- 9971419277 KARCHAM

Delivery Details

Max Delivery Days

120

Delivery Locations

1

Delivery Cities

Kinnaur

Delivery Locations

ConsigneeAddressCityStatePincodeQuantityDelivery DaysAdditional Requirement
-KinnaurKinnaur--10647120-

Authority Records

MINISTRY OF DEFENCEDEFENCE DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 4

GeM-Bidding-9736484.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 129 Items Sign in for GEM prices

#1

Cement bags 50 Kgs

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

10,647 nos Delivery: 120 days
#2

Sand Coarse

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

624 cum Delivery: 120 days
#3

Crushed stone aggregate 20mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,222 cum Delivery: 120 days
#4

TMT Steel bar 8 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

6,708 kg Delivery: 120 days
#5

TMT Steel bar 10 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

16,601 kg Delivery: 120 days
#6

TMT Steel bar 12 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

62,777 kg Delivery: 120 days
#7

TMT Steel bar 16 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,756 kg Delivery: 120 days
#8

APP based polymeric membrane

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,560 sqm Delivery: 120 days
#9

Scantling 3 INCH x 3 INCH seasoned first class hard wood 2 POINT 30 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

650 nos Delivery: 120 days
#10

75mm dia PVC pipe

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

767 rm Delivery: 120 days
#11

Shuttering Plywood 12mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,860 sqm Delivery: 120 days
#12

Binding Wire 20 gauge 0 POINT 9mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

260 kg Delivery: 120 days
#13

Nails 2 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 kg Delivery: 120 days
#14

Nails 3 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 kg Delivery: 120 days
#15

Nails 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 kg Delivery: 120 days
#16

Water Proofing Compound

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

14,625 kg Delivery: 120 days
#17

Quick Setting Compound

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

910 nos Delivery: 120 days
#18

Bitumen

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,170 kg Delivery: 120 days
#19

10mm thick MS Plate

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

27,768 kg Delivery: 120 days
#20

Shredded Rubber 150 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

312 sqm Delivery: 120 days
#21

25mm thick Ballestic Panel

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

312 sqm Delivery: 120 days
#22

Lime

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 kg Delivery: 120 days
#23

Primer for Synthetic Paint

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

390 ltr Delivery: 120 days
#24

Synthetic Enamel Paint Light brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

156 ltr Delivery: 120 days
#25

Synthetic Enamel Paint Medium brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

286 ltr Delivery: 120 days
#26

Synthetic Enamel Paint Dark brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

182 ltr Delivery: 120 days
#27

Anti rust Paint

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

468 ltr Delivery: 120 days
#28

Paint Brush

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

91 nos Delivery: 120 days
#29

Welding Rod 3 POINT 6mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

3,250 pkt Delivery: 120 days
#30

MS Door of size 1200 x 2100mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#31

PVC Door

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#32

Geotextile

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,730 sqm Delivery: 120 days
#33

Lightening Conductor

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 set Delivery: 120 days
#34

Rifle Racks

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#35

Fire Extinguisher

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#36

Oxygen Cylinder kit with trolley

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#37

Tarpaulin

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

52 nos Delivery: 120 days
#38

Sleeping Bed

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 nos Delivery: 120 days
#39

Mattress

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#40

Aluminium Cable for welding machine 2 Core 10 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,300 mtr Delivery: 120 days
#41

Portable 2 POINT 5 KVA Solar System

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#42

LED tube light fiting

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#43

Swich Socket 5 Amp

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

52 nos Delivery: 120 days
#44

Switch socket combination 5 BY15 Amp

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#45

PVC Switch Board 8 INCH x 10 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#46

PVC Switch Board 6 INCH x 4 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#47

PVC Casing and Capping of size 25 mm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

390 rm Delivery: 120 days
#48

PVC Casing Capping Tee bend

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#49

PVC Casing capping L bend

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#50

PVC Square box 4 INCH x 4 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#51

Elect wire single core Copper Conductor 1 POINT 5 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,600 rm Delivery: 120 days
#52

Elect wire single core Copper Conductor 2 POINT 5 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,950 rm Delivery: 120 days
#53

Elect wire two core 6 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,300 rm Delivery: 120 days
#54

MCB Box 6 way SPN

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#55

MCB 10 TO 32 Amp SP

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#56

Change over switch 63 Amp 3 phase four pole

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#57

Tape Insulation HALF INCH x 15 Mtr

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#58

Ceiling Rose

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

52 nos Delivery: 120 days
#59

Inline OR Mix Flow Exhaust fan with all fittings AND ducting items

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#60

Stainless Steel IWC wash down water closet pan

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#61

Stainless Steel wash hand basin

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#62

Angle valve 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#63

Bib cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#64

Pillar cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#65

Stop cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#66

Stainless steel grating with hole 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#67

Stainless steel grating without hole 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#68

Floor Trap 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#69

PVC Pipe 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

195 rm Delivery: 120 days
#70

PVC Pipe 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 rm Delivery: 120 days
#71

PVC P Trap 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#72

PVC Connection 600mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#73

PVC short connection pipe 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#74

PVC bend with oval access door 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#75

PVC plain bend 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#76

PVC T 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#77

PVC Socket 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

52 nos Delivery: 120 days
#78

PVC Socket 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#79

PVC Bend 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#80

PPR Pipe 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

520 rm Delivery: 120 days
#81

PPR Pipe 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

520 nos Delivery: 120 days
#82

PUF Insulated FRP water tank capacity 1000 Ltrs

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#83

PPR Gate valve of 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#84

PPR Elbow 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 nos Delivery: 120 days
#85

PPR Tank connector inner dia 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#86

PPR Reducer 32 x 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 nos Delivery: 120 days
#87

PPR Tee reducer 32 x 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 nos Delivery: 120 days
#88

PPR Elbow 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#89

PPR Socket 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#90

PPR Union 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 nos Delivery: 120 days
#91

PPR Tee 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 nos Delivery: 120 days
#92

PPR Tee 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#93

PPR Socket 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#94

PPR Union inner dia 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 nos Delivery: 120 days
#95

PPR Wall Clamp dia 25mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

260 nos Delivery: 120 days
#96

PPR Wall Clamp dia 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

390 nos Delivery: 120 days
#97

PPR Brass Elbow 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#98

PPR Brass Socket 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#99

PPR Brass FTA 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#100

PPR Brass MTA 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#101

SS Nipple 15mm x 25 mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#102

PPR Tee Brass 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#103

Readymade Septic Tank for Toilet 2000 Ltr

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#104

Taflon Tape

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#105

Cut off machine 14 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#106

ESAB Arc 200I

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#107

Durmut 5 Kg

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#108

Hand Gloves Rubber Best quality

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

104 nos Delivery: 120 days
#109

Pan Motor 18 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

65 nos Delivery: 120 days
#110

Phawrah with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 nos Delivery: 120 days
#111

Measuring Tape 03 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#112

Wiremess for Seiving Sand 01 Mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 roll Delivery: 120 days
#113

Axes Picks 03 Kg head with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

52 nos Delivery: 120 days
#114

Crow Bar Hexagonal 1200mm Long x 40mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#115

Gumboot Various size

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

78 pairs Delivery: 120 days
#116

Spirit Level 10 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#117

Nylon Mason Thread 100 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 roll Delivery: 120 days
#118

Plumbob Steel with Lasing

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#119

Water Level Pipe

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 mtr Delivery: 120 days
#120

Hammer 10 Kg with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#121

TMT Bar Bending frame

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#122

TMT Rod Bending Handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

13 nos Delivery: 120 days
#123

Wooden Gurmala of size 8 INCH x 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#124

Aluminium Study of size 3 INCH x 2 INCH and 6 FEET

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#125

Steel Gurmala of size 8 INCH x 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

26 nos Delivery: 120 days
#126

Steel Bucket 15 Ltr Capacity

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

39 nos Delivery: 120 days
#127

Iron Cutter Blade 14 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days
#128

Iron Cutter Blade 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

169 nos Delivery: 120 days
#129

Hexa Blade double side

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

130 nos Delivery: 120 days

Categories 145

AGITATORS SPECTROSCOPIC EQUIPMENT BITUMINOUS MATERIAL DISTRIBUTOR PVC PIPE PRINTING SERVICES PLATFORM SCALE SLUICE VALVE ANGLE PASTRIES STEAM IRON FERROUS ELECTRODE MISCELLANEOUS VALVE PAINTING ANGLE GLOBE VALVES COPPER CABLE STRUCTURE FABRICATION WELDING MACHINE PARTS POWER CABLE PTFE WIRE AIR CYLINDERS TUBE AND FITTING GRATING AIR COOLED ENGINE DESERT COOLER ELECTRICAL PRODUCTS WIRING ASSEMBLY WELDING FLUX WELDING ELECTRODE COMPRESSOR KITS OFFSET PRINTING STEEL FURNITURE ARC VALVE COMPRESSED BOARD HARDWARE AND FASTENERS AXES GEYSER LOADER TONGUE WIRE BLADE FAULT ANALYSIS FERROUS ALLOY SUPPLY WOODEN BOARD DISTEMPER WOODEN PRODUCT DISCRETE COMPONENTS XLPE CABLE PETROLEUM PRODUCT DESIGN DEVELOPMENT ELBOW AMPOULE FILLING EQUIPMENT HYDRAULIC SHOVEL WOOD SUPPLY GI WIRE ELECTRICAL BOXES FIRE EXTINGUISHERS MILITARY VEHICLE BED PREPARATION OF DOCUMENT WELDING MACHINE PANEL CONDUCTOR SOCKET PAINT SUPPLY WATER TANK ELECTRIC ROPE SHOVEL MS WIRE AIR EXHAUSTER PAPER AND PRINTING SERVICES HIGH TENSION PANEL LED LUMINARIES COILED CABLE WOODEN PLANK HANDY FOGGER SWITCH GEAR FLUID MECHANICS EQUIPMENT TUBE LIGHT WELDING WIRE CEMENT FITMENT LFH CABLE SEPTIC TANK BUCKET WOODEN FURNITURE FALL PROTECTION LANYARD BARE METAL AIR BLOWER SKILLED PERSONNEL WELDING TOOL PLY WOOD FORESTRY PRODUCTS AWM WIRE BLOCKPRINTING PRINTMAKING PAPER GL WIRE CHANGE OVER SWITCH VALVES CUT OFF MACHINE RCC WORK WELDING ROD POWER WIRE GATE VALVES TUBE BOX VALVE MATTRESS WATER SUPPLY MATERIAL WELDING GENERATOR ENAMELING PAINTS AND ACCESSORIES TARPAULIN WIRE FILTER RETAINERS TROLLEY ERECTION OF STRUCTURAL CUTTER PLYWOOD TURBINE PUMPS ARC WELDING SLIDER VALVES PAINTS AND PRIMERS RESUSCITATION KIT WELDING TIP DUCTING ANGLE COCK TRANSITION METALS BOILER MOUNTING VALVE CABLE STAINLESS STEEL PRODUCT FABRICATOR WATER TRANSMISSION MACHINE GAUGE AUTOMOTIVE CABLE MEDICAL GAS BOILER VALVE FIRST AID BOX PEB UPVC PIPE PAINTS FAN METAL PRODUCTS BAR TEE LIME TMT MANUFACTURING SERVICES PAINTING MATERIAL

Required Documents

1

PAN Card copy

2

GSTIN copy

3

Cancelled cheque copy

4

EFT Mandate certified by bank

5

Data Sheet of offered products

6

OEM Authorization / Manufacturer Authorization certificate

7

Vendor Code Creation documents

8

Any installation/commissioning credentials

9

Proof of non-obsolescence (OEM life, residual life) where applicable

Frequently Asked Questions

Key insights about HIMACHAL PRADESH tender market

How to bid in the Armed Forces Tribunal tender in Kinnaur Himachal Pradesh 2026?

Bidders should prepare PAN, GSTIN, cancelled cheque, EFT mandate, and OEM authorization. Submit Data Sheets with product details, ensure OEM-certified installation capability, and be ready for up to 50% quantity variation. Verify GST treatment and non-obsolescence requirements before bid submission.

What documents are required for vendor code creation in this tender?

Submit PAN, GSTIN, cancelled cheque, EFT mandate, and Data Sheet alignment. Include OEM authorization and proof of installation capability. Ensure merchant bank details are current and reflect manufacturer relationships to streamline vendor code creation.

What is the data sheet verification requirement for the offered products?

Provide a Data Sheet that precisely matches the offered product specifications. Any mismatch can lead to bid rejection, so cross-check model numbers, ratings, dimensions, and performance metrics against OEM documentation before submission.

What is the quantity variation clause in this procurement in Himachal?

The Purchaser may increase or decrease quantity up to 50% at contract placement and during currency. Additional delivery time is calculated as (increased quantity/original quantity) × original delivery period, with a minimum of 30 days unless the original period is longer.

What installation requirements must bidders meet for this Defence tender?

Installation, commissioning, testing, and training must be conducted by OEM or OEM-certified resources. Ensure you have authorized OEM support, service contacts, and documented installation capabilities across the specified buyer discretion locations.

How does GST apply to bids for this Armed Forces Tribunal procurement?

GST will be reimbursed at actual rates or the lower of the quoted GST percentage. The buyer will not bear responsibility for rate discrepancies; bidders should quote GST carefully and verify applicability.

What happens if a bid lacks data sheet alignment or OEM authorization?

Bids lacking Data Sheet alignment or OEM authorization risk rejection. Ensure data sheets reflect offered items, verify OEM certificates, and attach manufacturer authorization documents to avoid disqualification.

What are the eligibility criteria regarding financial standing for this bid?

Bidders must avoid liquidation or bankruptcy proceedings and provide a credible financial standing. While not all specifics are disclosed, include financial statements and supporting documents to demonstrate stability alongside GST/PAN credentials.

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

 View All