DFCCIL Wiring, UPS, Lighting, Fire Alarm and HVAC Tender Gautam Buddha Nagar Uttar Pradesh 2026
Bid Publish Date
13-Jan-2026, 3:43 pm
Bid End Date
27-Jan-2026, 4:00 pm
Value
₹1,34,79,462
Location
Progress
Quantity
7551
Category
Wiring
Bid Type
Two Packet Bid
Categories
197
Tender Overview
Dedicated Freight Corridor Corporation Of India Limited invites bids for a comprehensive package covering wiring, UPS, lighting, fire alarm and HVAC systems in the Gautam Buddha Nagar, Uttar Pradesh region (postal code 201301). With an estimated contract value of ₹13,479,462.00, the procurement spans multiple electrical and life-safety disciplines and encompasses 56 BOQ items in total. A key commercial feature is the optional quantity clause allowing a 25% increase or decrease at contracted rates, plus a defined extension mechanism aligned to the original delivery period. This requirement emphasizes scalable deployment and phased delivery aligned to project progression.
Technical Specifications & Requirements
- Project scope includes wiring, UPS systems, lighting, fire alarm and HVAC capabilities under a single procurement umbrella.
- No public technical specifications are published in the tender data; bidders should prepare for multi-disciplinary integration across electrical, life-safety, and climate-control subsystems.
- The ATC terms indicate deliverables must align with the last-due-date delivery cycle and accommodate quantity variation calculations: increase/decrease up to 25%; additional time calculated as (Increased quantity ÷ Original quantity) × Original delivery period with a minimum of 30 days.
- Estimated value and category imply participation from contractors with cross-domain installation and commissioning experience.
- Emphasize readiness for coordinated on-site execution, integration testing, and handover with DFCCIL project controls.
Terms, Conditions & Eligibility
- EMD amount is not disclosed in the data; bidders should verify in the ATC/Terms.
- Eligibility requires compliance with the option clause: quantity variations up to 25% during contract and currency; delivery timelines extend from the original last delivery date.
- The order may extend to the original delivery period while exercising the option clause; bid submission should account for scalable deployment and schedule risk.
- No explicit start/end dates or payment terms published; bidders should align with DFCCIL ATC documents and tender terms for final scheduling and invoicing.
- 56 items in the BOQ indicate broad scope, requiring a diversified supplier base and robust project management.
Key Specifications
-
Product/service names: Wiring, UPS, Lighting, Fire Alarm, HVAC integration
-
Estimated value: ₹13,479,462.00
-
BOQ items: 56 total (nature of items not disclosed in detail)
-
Delivery mechanism: option clause permitting ±25% quantity variation
-
Delivery timeframe: calculated extension formula with minimum 30 days
-
Standards/certifications: not specified in tender data; refer to ATC for required conformance
Terms & Conditions
-
Option Clause: quantity can vary ±25% at contract at contracted rates
-
Delivery extension computed as (Increased quantity ÷ Original quantity) × Original delivery period with min 30 days
-
EMD details and start/end dates not disclosed; verify via ATC and tender documents
Important Clauses
Payment Terms
Not disclosed in data; verify in ATC/Terms and Conditions and final contract documents
Delivery Schedule
Delivery period begins from last date of original delivery order; extended period follows option clause calculations
Penalties/Liquidated Damages
Not specified in provided data; refer to ATC for LDs or performance bond requirements
Bidder Eligibility
-
Experience in multi-discipline electrical installations (wiring, UPS, lighting, fire alarm, HVAC)
-
Demonstrated capability to manage 56-item or equivalent scope
-
Compliance with DFCCIL ATC terms including option-clause delivery adaptations
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Wiring , UPS , LIGHT , FIRE ALARM , HVAC
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-8833700.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
56 Items Sign in to view GEM price trends Sign in for GEM prices
Wiring
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C
Wiring
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C
Wiring
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Wiring
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq.mm +1 X 4 sq.mm earth wire
Wiring
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Wiring
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
Wiring
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
Wiring
Supplying and fixing suitable size GI box of 1.2 mm thickness (min.) with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required.
Wiring
Supplying and fixing suitable size GI box of 1.2 mm thickness (min.) with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch connection etc.as required.
Wiring
SITC of 1200 mm sweep BEE 5star rated ceiling fan with Brush Less Direct Current BLDC Motor as per CPWD Specs complete
Wiring
Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar But without MCB / RCCB / Isolator 4 Way 4+12 Double Door
Wiring
Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar detachable gland plate interconnections powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 6 Way (4+18) Double Door
Wiring
Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar detachable gland plate interconnections powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 12 Way SPN Double Door
Wiring
Supplying and fixing 5 amps. to 32 amps rating 240/415 V 10 KA C series Miniature circuit breaker MCB suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. SP
Wiring
Supplying and fixing 5 amps. to 32 amps. rating 240/415 V 10 KA C series Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. DP
Wiring
Supplying and fixing 5 amps. to 32 amps. rating 240/415 V 10 KA C series Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. TPN
Wiring
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required. Above 185 sq. mm.
Wiring
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC / HUME / METAL pipe as required upto 35 sq. mm.
Wiring
Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 3.5X240 sq. mm.
Wiring
Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 3.5X120 sq. mm.
Wiring
Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 4CX25 sq. mm.
Wiring
Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray (Galvanization thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections joined with connectors suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts etc. as required. 450 mm width X 50 mm depth X 2.0 mm thickness
Wiring
SITC of recessed LED down lighter made of pressure die cast aluminium housing including flange with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than equal to 110 lumens/watt and a minimum system lumen output of 1200 lumens complete as per Tech. Specs.
Wiring
SITC of recess mounted LED luminaire (2X2) made of extrusion Aluminium having powder coating with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than or equal to 120 lumens/watt and a minimum system lumen output of 4200 lumens complete as per Tech. Specs.
Wiring
Supplying and fixing 30 A 415 V TPN Industrial type socket outlet with 4 pole and earth metal enclosed plug top along with 30 A C curve TPMCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections testing and commissioning etc. as required.
Wiring
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
Wiring
SITC of exhaust fans 450 mm sweep & in the existing opening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as required including fixing of louvers/shutters complete
Wiring
Supply Installation Testing and Commissioning of Air Circulator Type Electric Fan and Regulator (V2) Conforming To IS 2997 copper winding 750 mm Sweep
Wiring
SITC of surface mounted LED down lighter made of pressure diecast aluminum housing including flange with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than or equal to 110 lumens/watt and a minimum system lumen output of 1200 lumens complete as per Tech. Specs.
Wiring
Supply Installation Testing & Commissioning of Maintenance free Conductive Concrete Earthing electrode - having copper bonded MS rod of Dia 17.2 mm x 3000 mm length x 80 mm Dia. of Earth Enhancing Material including Boring & filling and Supply of 10 HDPE earth chamber with Heavy Duty cover (One chamber per electrode)
Wiring
Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 3.5C X 240 Al.
Wiring
Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 3.5CX120 Al.
Wiring
Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 4CX25 sq. mm. Cu.
Wiring
Main LT Panel Incomer 630A Outgoing 160A 4P MCCB 02 Nos. 100/63A 4P MCCB 02 Nos. 40A 4P MCB 15 Nos. including MFM and Indication Lamps
Wiring
ODU Panel Incomer 100A 4P MCCB Outgoing 25A 100 mA RCBO 08 Nos. including MFM and Indication Lamps
Wiring
UPS Panel Incomer 63A 4P MCCB Outgoing 25A DP MCB 05 including MFM and Indication Lamps
UPS
Supply Installation Testing and Commissioning of 40 kVA UPS including CAMC of 03 years after 01 year DLP
LIGHT
SITC of LED Highbay luminaire with a housing of High Pressure Die casted Aluminium and cover of high transmittence tempered glass/PC to ensure protection. The luminaire should have a color consistency SDCM less than 5 CRI greater than 80 and CCT of 5700/6500K. The luminaire shall be compliant with IP65 classification and impact protection of IK08 to ensure durablility. Luminaire shall be designed to emit at least 24000 nominal lumens at a system efficacy of atleast 110 lumen/watt.
FIRE ALARM
Supply Installation Testing and Commissioning of microprocessor based intelligent addressable fire alarm control panel and central processing unit capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop loop length upto 2 km network communication card minimum 640 character LCD display (6-7 inch) with touch screen minimum 4000 events history log in non-volatile memory (EPROM) power supply unit (230+/- 5% V 50 Hz) 48 hrs back-up with 24V sealed maintenance free batteries with automatic charger 2Loop complete as per Tech. Specs.
FIRE ALARM
Supply Installation Testing and Commissioning of intelligent addressable Multicriteria detector . Detector should have inbuilt isolators as per NFPA 72 style 7 wiring requirements and have an option of soft addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values. The detector shall have tri/dual color LED Green for Normal and Red for alarm. Shall have pre-programmed sensitivity parameter sets Sensitive Standard Robust. Shall be Polarity Insensitive. It Shall be EN54/ VDs/ UL certification.(Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector)
FIRE ALARM
Supply Installation Testing and Commissioning of Addressable Fire/Phone/Monitor Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements & with flexible network. Shall have multi-color light-emitting diode (LED) which indicates system status Green Amber and Red. It Shall be Polarity Insensitive. It Shall be EN54/ Vds Certification/UL.
FIRE ALARM
Supply Installation Testing and Commissioning of addressable Manual Pull Station. Shock and Vibration Resistant Pull Down Lever Remains Down Until Reset with inbuilt isolators as per NFPA 72 style 7 wiring requirements with flexible network structures & necessary fixing arrangements with key complete as required. Shall be EN 54 / Vds/UL Certification. It Shall be Polarity Insensitive.
FIRE ALARM
Supply Installation Testing and Commissioning of sounder as per NFPA 72 style 7 wiring requirements & with 20 different tone variants selection options & adjustable sound pressure by 5 levels the sound pressure 92 dB(A) should be programmed from the panel. Shall be EN54 / Vds/UL Certification.
FIRE ALARM
Supply Installation Testing and Commissioning of red strobe with field selectable 15/30/75/110 candelas. Shall be EN54 / Vds/UL Certification.
FIRE ALARM
Supply Installation Testing & Commissioning of certified 2 C x 1.5 sq.mm Fire Survival Armoured cable clamped directly on wall/Ceiling /structural member with the use of GI clamps/saddle etc. Cable shall be 600/1000V rated twisted with Class-2 annealed stranded copper conductor having special cross-linkable Low Smoke Zero Halogen Ceramified Silicon insulation as per BS EN 50363 galvanized steel wire armour and Low Smoke Zero Halogen inner & outer sheath. Should comply to EN 61034-2 & EN 60754- 1. Should meet fire performance circuit integrity test as per BS EN 50200 & BS 6387 CWZ (950 Deg. C for 180 mins). Outer sheath will be in Red colour.
HVAC
SITC of ODU as per CPWD DSR (E&M) 2025 specification 60 HP
HVAC
High wall type Indoor unit equipped with multispeed motor coil section with DX copper coil electronic expansion valve outer cabinet cord less remote control drain pan necessary accessories etc. complete as required as per CPWD DSR (E&M) 2025 specification.
HVAC
SITC of Refrigerant Pipes 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation
HVAC
SITC of Refrigerant Pipes 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation
HVAC
SITC of Refrigerant Pipes 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation
HVAC
SITC of Refrigerant Pipes 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation
HVAC
SITC of Refrigerant Pipes 19 mm dia (OD) (Hrad drawn) with tube thickness 1.2 mm with 13 mm thick insulation
HVAC
SITC of Refrigerant Pipes 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
HVAC
SITC of Refrigerant Pipes 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
HVAC
SITC of Refrigerant Pipes 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
HVAC
CAMC of 60 HP HVAC System for 3 Years after 1 year of DLP
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Wiring | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C | 225 | pieces | noida7 | 90 | |
| 2 | Wiring | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C | 105 | pieces | noida7 | 90 | |
| 3 | Wiring | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 650 | meter | noida7 | 90 | |
| 4 | Wiring | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq.mm +1 X 4 sq.mm earth wire | 680 | meter | noida7 | 90 | |
| 5 | Wiring | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire | 110 | meter | noida7 | 90 | |
| 6 | Wiring | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire | 125 | meter | noida7 | 90 | |
| 7 | Wiring | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire | 85 | meter | noida7 | 90 | |
| 8 | Wiring | Supplying and fixing suitable size GI box of 1.2 mm thickness (min.) with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required. | 136 | pieces | noida7 | 90 | |
| 9 | Wiring | Supplying and fixing suitable size GI box of 1.2 mm thickness (min.) with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch connection etc.as required. | 132 | pieces | noida7 | 90 | |
| 10 | Wiring | SITC of 1200 mm sweep BEE 5star rated ceiling fan with Brush Less Direct Current BLDC Motor as per CPWD Specs complete | 60 | pieces | noida7 | 90 | |
| 11 | Wiring | Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar But without MCB / RCCB / Isolator 4 Way 4+12 Double Door | 6 | pieces | noida7 | 90 | |
| 12 | Wiring | Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar detachable gland plate interconnections powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 6 Way (4+18) Double Door | 6 | pieces | noida7 | 90 | |
| 13 | Wiring | Supplying and fixing following way prewired triple pole and neutral sheet steel for 415 volts on surface/recess complete with loose wire box terminal connector for all incoming and outgoing circuits duly prewired with suitable size FRLS PVC insulated multi strand copper conductor upto terminal blocks tinned copper bus bar neutral link earth bar din bar detachable gland plate interconnections powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 12 Way SPN Double Door | 3 | pieces | noida7 | 90 | |
| 14 | Wiring | Supplying and fixing 5 amps. to 32 amps rating 240/415 V 10 KA C series Miniature circuit breaker MCB suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. SP | 216 | pieces | noida7 | 90 | |
| 15 | Wiring | Supplying and fixing 5 amps. to 32 amps. rating 240/415 V 10 KA C series Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. DP | 6 | pieces | noida7 | 90 | |
| 16 | Wiring | Supplying and fixing 5 amps. to 32 amps. rating 240/415 V 10 KA C series Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. TPN | 15 | pieces | noida7 | 90 | |
| 17 | Wiring | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required. Above 185 sq. mm. | 150 | meter | noida7 | 90 | |
| 18 | Wiring | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC / HUME / METAL pipe as required upto 35 sq. mm. | 50 | meter | noida7 | 90 | |
| 19 | Wiring | Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 3.5X240 sq. mm. | 4 | pieces | noida7 | 90 | |
| 20 | Wiring | Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 3.5X120 sq. mm. | 2 | pieces | noida7 | 90 | |
| 21 | Wiring | Supplying and making end termination of following sizes with brass double compression gland including providing and crimping solder less plugs/ferrules of sizes PVC insulated PVC sheathed aluminium conductor armoured cable 1.1 KV grade. 4CX25 sq. mm. | 100 | pieces | noida7 | 90 | |
| 22 | Wiring | Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray (Galvanization thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections joined with connectors suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts etc. as required. 450 mm width X 50 mm depth X 2.0 mm thickness | 300 | meter | noida7 | 90 | |
| 23 | Wiring | SITC of recessed LED down lighter made of pressure die cast aluminium housing including flange with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than equal to 110 lumens/watt and a minimum system lumen output of 1200 lumens complete as per Tech. Specs. | 210 | pieces | noida7 | 90 | |
| 24 | Wiring | SITC of recess mounted LED luminaire (2X2) made of extrusion Aluminium having powder coating with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than or equal to 120 lumens/watt and a minimum system lumen output of 4200 lumens complete as per Tech. Specs. | 120 | pieces | noida7 | 90 | |
| 25 | Wiring | Supplying and fixing 30 A 415 V TPN Industrial type socket outlet with 4 pole and earth metal enclosed plug top along with 30 A C curve TPMCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections testing and commissioning etc. as required. | 20 | pieces | noida7 | 90 | |
| 26 | Wiring | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. | 15 | pieces | noida7 | 90 | |
| 27 | Wiring | SITC of exhaust fans 450 mm sweep & in the existing opening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as required including fixing of louvers/shutters complete | 8 | pieces | noida7 | 90 | |
| 28 | Wiring | Supply Installation Testing and Commissioning of Air Circulator Type Electric Fan and Regulator (V2) Conforming To IS 2997 copper winding 750 mm Sweep | 30 | pieces | noida7 | 90 | |
| 29 | Wiring | SITC of surface mounted LED down lighter made of pressure diecast aluminum housing including flange with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) greater than or equal to 110 lumens/watt and a minimum system lumen output of 1200 lumens complete as per Tech. Specs. | 12 | pieces | noida7 | 90 | |
| 30 | Wiring | Supply Installation Testing & Commissioning of Maintenance free Conductive Concrete Earthing electrode - having copper bonded MS rod of Dia 17.2 mm x 3000 mm length x 80 mm Dia. of Earth Enhancing Material including Boring & filling and Supply of 10 HDPE earth chamber with Heavy Duty cover (One chamber per electrode) | 8 | pieces | noida7 | 90 | |
| 31 | Wiring | Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 3.5C X 240 Al. | 320 | meter | noida7 | 90 | |
| 32 | Wiring | Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 3.5CX120 Al. | 150 | meter | noida7 | 90 | |
| 33 | Wiring | Supply of 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per undernoted size as per specification 4CX25 sq. mm. Cu. | 100 | meter | noida7 | 90 | |
| 34 | Wiring | Main LT Panel Incomer 630A Outgoing 160A 4P MCCB 02 Nos. 100/63A 4P MCCB 02 Nos. 40A 4P MCB 15 Nos. including MFM and Indication Lamps | 1 | pieces | noida7 | 90 | |
| 35 | Wiring | ODU Panel Incomer 100A 4P MCCB Outgoing 25A 100 mA RCBO 08 Nos. including MFM and Indication Lamps | 1 | pieces | noida7 | 90 | |
| 36 | Wiring | UPS Panel Incomer 63A 4P MCCB Outgoing 25A DP MCB 05 including MFM and Indication Lamps | 1 | pieces | noida7 | 90 | |
| 37 | UPS | Supply Installation Testing and Commissioning of 40 kVA UPS including CAMC of 03 years after 01 year DLP | 1 | pieces | noida7 | 90 | |
| 38 | LIGHT | SITC of LED Highbay luminaire with a housing of High Pressure Die casted Aluminium and cover of high transmittence tempered glass/PC to ensure protection. The luminaire should have a color consistency SDCM less than 5 CRI greater than 80 and CCT of 5700/6500K. The luminaire shall be compliant with IP65 classification and impact protection of IK08 to ensure durablility. Luminaire shall be designed to emit at least 24000 nominal lumens at a system efficacy of atleast 110 lumen/watt. | 45 | pieces | noida7 | 90 | |
| 39 | FIRE ALARM | Supply Installation Testing and Commissioning of microprocessor based intelligent addressable fire alarm control panel and central processing unit capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop loop length upto 2 km network communication card minimum 640 character LCD display (6-7 inch) with touch screen minimum 4000 events history log in non-volatile memory (EPROM) power supply unit (230+/- 5% V 50 Hz) 48 hrs back-up with 24V sealed maintenance free batteries with automatic charger 2Loop complete as per Tech. Specs. | 1 | pieces | noida7 | 90 | |
| 40 | FIRE ALARM | Supply Installation Testing and Commissioning of intelligent addressable Multicriteria detector . Detector should have inbuilt isolators as per NFPA 72 style 7 wiring requirements and have an option of soft addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values. The detector shall have tri/dual color LED Green for Normal and Red for alarm. Shall have pre-programmed sensitivity parameter sets Sensitive Standard Robust. Shall be Polarity Insensitive. It Shall be EN54/ VDs/ UL certification.(Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) | 70 | pieces | noida7 | 90 | |
| 41 | FIRE ALARM | Supply Installation Testing and Commissioning of Addressable Fire/Phone/Monitor Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements & with flexible network. Shall have multi-color light-emitting diode (LED) which indicates system status Green Amber and Red. It Shall be Polarity Insensitive. It Shall be EN54/ Vds Certification/UL. | 1 | pieces | noida7 | 90 | |
| 42 | FIRE ALARM | Supply Installation Testing and Commissioning of addressable Manual Pull Station. Shock and Vibration Resistant Pull Down Lever Remains Down Until Reset with inbuilt isolators as per NFPA 72 style 7 wiring requirements with flexible network structures & necessary fixing arrangements with key complete as required. Shall be EN 54 / Vds/UL Certification. It Shall be Polarity Insensitive. | 12 | pieces | noida7 | 90 | |
| 43 | FIRE ALARM | Supply Installation Testing and Commissioning of sounder as per NFPA 72 style 7 wiring requirements & with 20 different tone variants selection options & adjustable sound pressure by 5 levels the sound pressure 92 dB(A) should be programmed from the panel. Shall be EN54 / Vds/UL Certification. | 12 | pieces | noida7 | 90 | |
| 44 | FIRE ALARM | Supply Installation Testing and Commissioning of red strobe with field selectable 15/30/75/110 candelas. Shall be EN54 / Vds/UL Certification. | 12 | pieces | noida7 | 90 | |
| 45 | FIRE ALARM | Supply Installation Testing & Commissioning of certified 2 C x 1.5 sq.mm Fire Survival Armoured cable clamped directly on wall/Ceiling /structural member with the use of GI clamps/saddle etc. Cable shall be 600/1000V rated twisted with Class-2 annealed stranded copper conductor having special cross-linkable Low Smoke Zero Halogen Ceramified Silicon insulation as per BS EN 50363 galvanized steel wire armour and Low Smoke Zero Halogen inner & outer sheath. Should comply to EN 61034-2 & EN 60754- 1. Should meet fire performance circuit integrity test as per BS EN 50200 & BS 6387 CWZ (950 Deg. C for 180 mins). Outer sheath will be in Red colour. | 410 | meter | noida7 | 90 | |
| 46 | HVAC | SITC of ODU as per CPWD DSR (E&M) 2025 specification 60 HP | 410 | pieces | noida7 | 90 | |
| 47 | HVAC | High wall type Indoor unit equipped with multispeed motor coil section with DX copper coil electronic expansion valve outer cabinet cord less remote control drain pan necessary accessories etc. complete as required as per CPWD DSR (E&M) 2025 specification. | 60 | pieces | noida7 | 90 | |
| 48 | HVAC | SITC of Refrigerant Pipes 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation | 410 | meter | noida7 | 90 | |
| 49 | HVAC | SITC of Refrigerant Pipes 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation | 236 | meter | noida7 | 90 | |
| 50 | HVAC | SITC of Refrigerant Pipes 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation | 540 | meter | noida7 | 90 | |
| 51 | HVAC | SITC of Refrigerant Pipes 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation | 274 | meter | noida7 | 90 | |
| 52 | HVAC | SITC of Refrigerant Pipes 19 mm dia (OD) (Hrad drawn) with tube thickness 1.2 mm with 13 mm thick insulation | 392 | meter | noida7 | 90 | |
| 53 | HVAC | SITC of Refrigerant Pipes 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation | 232 | meter | noida7 | 90 | |
| 54 | HVAC | SITC of Refrigerant Pipes 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation | 110 | meter | noida7 | 90 | |
| 55 | HVAC | SITC of Refrigerant Pipes 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation | 160 | meter | noida7 | 90 | |
| 56 | HVAC | CAMC of 60 HP HVAC System for 3 Years after 1 year of DLP | 1 | pieces | noida7 | 90 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
GST registration certificate
Permanent Account Number (PAN) card
Experience certificates for similar wiring/UPS/lighting/HVAC projects
Financial statements or turnover evidence (last 3 years)
EMD/Security deposit submission proof (as per ATC)
Technical bid documents and compliance statements
OEM authorization letters (where applicable)
Any required qualification/certification certificates (e.g., IS/IEC standards)
Frequently Asked Questions
Key insights about UTTAR PRADESH tender market
How to bid for the DFCCIL wiring UPS HVAC tender in UP 2026?
To bid, submit the technical and financial bids as per the ATC, ensure GST and PAN compliance, provide OEM authorizations if required, and include EMD documentation. Check the clause permitting ±25% quantity variation and prepare delivery plans accordingly.
What documents are required for DFCCIL Uttar Pradesh tender submission?
Required documents typically include GST certificate, PAN card, experience certificates for wiring/UPS/lighting/HVAC, financial statements, EMD documentation, technical compliance, and OEM authorizations. Confirm exact list from the ATC and bid submission portal prior to closing.
What are the delivery extension rules under the option clause?
Delivery extension is calculated as (Increased quantity ÷ Original quantity) × Original delivery period, with a minimum of 30 days. The purchaser may extend up to the original delivery period during exercise of option; align project schedules accordingly.
What is the estimated value for the DFCCIL UP tender 2026?
The tender’s estimated value is ₹13,479,462.00, signaling a moderately large multi-disciplinary electrical-systems package requiring cross-functional suppliers and robust project management capabilities.
Are there any mandatory standards for this DFCCIL bid in UP?
Standards are not listed in the provided data; bidders should rely on ATC documents for IS/IEC or other certifications and confirm during bid submission to ensure compliance with DFCCIL requirements.
When is the bid submission deadline for this Uttar Pradesh tender?
The exact submission deadline is not provided here; bidders must consult the ATC and DFCCIL tender portal for the final dates and the submission window, along with any pre-bid meeting notices.
What categories of work are included in this DFCCIL bid in UP 2026?
Categories include wiring, UPS systems, lighting, fire alarm, and HVAC integration. Bidders should prepare cross-domain capabilities, from electrical installation through climate control and life-safety system integration.
What are the key eligibility criteria for DFCCIL UP bid 2026?
Key criteria include demonstrated experience in similar multi-disciplinary electrical projects, financial stability, and compliance with the option clause delivery terms. Ensure project references and financial documents are ready for bid submission.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-8833700.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS