Procurement Opportunity: Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation in KOLKATA, WEST BENGAL
Bid Publish Date
18-May-2025, 6:15 pm
Bid End Date
13-Jun-2025, 9:00 am
EMD
₹80,000
Location
Progress
RAQuantity
13539
Category
Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges
Bid Type
Two Packet Bid
Categories
67
Indian Army announces a tender for Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan, Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering, Providing and laying in position specified grade of reinforced cement concrete, Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand, 12mm thick cement plaster 1ratio4, Filling available excavated earth excluding rock in trenches plinth sides of foundations, Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete, Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars, Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete, Structural steel work, Providing and fixing MS Chequered plate 5mm thick, Providing and fixing 0dot8mm thick colour coated sheet for shed, Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges, PROVIDING AND FIXING SS Top Belay Bar, MOVABLE CLIMBING HOLDS, Providing Seat Harness, STATIC ROPE 10 MM, CARABINER, Providing bracket FdotOdot8 bracket, Providing MITTON, Gri Gri, Providing Quick Draw, 30mm Manila Rope in KOLKATA, WEST BENGAL. Quantity: 13539. Submission Deadline: 13-06-2025 09: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , Providing and laying in position specified grade of reinforced cement concrete , Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , Filling available excavated earth excluding rock in trenches plinth sides of foundations , Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete , Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars , Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete , Structural steel work , Providing and fixing MS Chequered plate 5mm thick , Providing and fixing 0dot8mm thick colour coated sheet for shed , Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges , PROVIDING AND FIXING SS Top Belay Bar , MOVABLE CLIMBING HOLDS , Providing Seat Harness , STATIC ROPE 10 MM , CARABINER , Providing bracket FdotOdot8 bracket , Providing MITTON , Gri Gri , Providing Quick Draw , 30mm Manila Rope
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-7796451.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
23 Items Sign in to view GEM price trends Sign in for GEM prices
Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan
Earth work in excavation by mechanical means bracket open Hydraulic excavator oblique manual means in foundation trenches or drains bracket open not exceeding 1 dot 5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1 dot 5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m point All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering dot All work up to plinth level 1 ratio 4 ratio 8 bracket 1 Cement dash 4 coarse sand dash 8 graded stone aggregate 40 mm nominal size
Providing and laying in position specified grade of reinforced cement concrete
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level 1dash1dot5dash3 bracket1 cement 1dot5 coarse sand 3
Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand
Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand
12mm thick cement plaster 1ratio4
12mm thick cement plaster 1ratio4
Filling available excavated earth excluding rock in trenches plinth sides of foundations
Filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1dot5 m
Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete
Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete
Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars
Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars
Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete
Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete
Structural steel work
Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete
Providing and fixing MS Chequered plate 5mm thick
Providing and fixing MS Chequered plate 5mm thick
Providing and fixing 0dot8mm thick colour coated sheet for shed
Providing and fixing 0dot8mm thick colour coated sheet for shed
Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges
Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges 3D panels are modular in shapes having own individual projection minimum 250mm 2D Panels with 3D like effect Shape are not accepted Panels shall have provision of insert holes at the rate minimum four nos per square meter for fixing holds arrangement for fixing holders protection points belay points and arrangement at top for fixing security system chain anchors at top The panels should be able to withstand climbers weight weather proof for outdoor use and meet norms as per EN 12572 ratio 2017 STANDARDS The panel will have sand finish on one side slight abrasion on climbing side Overhang and other standard should be as per drawing and as directed by designer Wall should be so designed that it can be used for mulitpurpose training such as begineer intermediate advance level and climbing competition Face 1 dash 12 into 4 Mtr dash 3D Panels 48 Sqm
PROVIDING AND FIXING SS Top Belay Bar
PROVIDING AND FIXING SS Top Belay Bar
MOVABLE CLIMBING HOLDS
MOVABLE CLIMBING HOLDS
Providing Seat Harness
Providing Seat Harness
STATIC ROPE 10 MM
STATIC ROPE 10 MM
CARABINER
CARABINER
Providing bracket FdotOdot8 bracket
Providing bracket FdotOdot8 bracket
Providing MITTON
Providing MITTON
Gri Gri
Gri Gri
Providing Quick Draw
Providing Quick Draw
30mm Manila Rope
30mm Manila Rope
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan | Earth work in excavation by mechanical means bracket open Hydraulic excavator oblique manual means in foundation trenches or drains bracket open not exceeding 1 dot 5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1 dot 5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m point All kinds of soil | 120 | cum | pokhriya.188k | 120 | |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering dot All work up to plinth level 1 ratio 4 ratio 8 bracket 1 Cement dash 4 coarse sand dash 8 graded stone aggregate 40 mm nominal size | 4 | cum | pokhriya.188k | 120 | |
| 3 | Providing and laying in position specified grade of reinforced cement concrete | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level 1dash1dot5dash3 bracket1 cement 1dot5 coarse sand 3 | 15 | cum | pokhriya.188k | 120 | |
| 4 | Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand | Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand | 9 | cum | pokhriya.188k | 120 | |
| 5 | 12mm thick cement plaster 1ratio4 | 12mm thick cement plaster 1ratio4 | 25 | sqm | pokhriya.188k | 120 | |
| 6 | Filling available excavated earth excluding rock in trenches plinth sides of foundations | Filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1dot5 m | 96 | cum | pokhriya.188k | 120 | |
| 7 | Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete | Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete | 5 | cum | pokhriya.188k | 120 | |
| 8 | Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars | Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars | 1,200 | kg | pokhriya.188k | 120 | |
| 9 | Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete | Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete | 75 | kg | pokhriya.188k | 120 | |
| 10 | Structural steel work | Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete | 9,800 | kg | pokhriya.188k | 120 | |
| 11 | Providing and fixing MS Chequered plate 5mm thick | Providing and fixing MS Chequered plate 5mm thick | 1,500 | kg | pokhriya.188k | 120 | |
| 12 | Providing and fixing 0dot8mm thick colour coated sheet for shed | Providing and fixing 0dot8mm thick colour coated sheet for shed | 36 | sqm | pokhriya.188k | 120 | |
| 13 | Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges | Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges 3D panels are modular in shapes having own individual projection minimum 250mm 2D Panels with 3D like effect Shape are not accepted Panels shall have provision of insert holes at the rate minimum four nos per square meter for fixing holds arrangement for fixing holders protection points belay points and arrangement at top for fixing security system chain anchors at top The panels should be able to withstand climbers weight weather proof for outdoor use and meet norms as per EN 12572 ratio 2017 STANDARDS The panel will have sand finish on one side slight abrasion on climbing side Overhang and other standard should be as per drawing and as directed by designer Wall should be so designed that it can be used for mulitpurpose training such as begineer intermediate advance level and climbing competition Face 1 dash 12 into 4 Mtr dash 3D Panels 48 Sqm | 48 | sqm | pokhriya.188k | 120 | |
| 14 | PROVIDING AND FIXING SS Top Belay Bar | PROVIDING AND FIXING SS Top Belay Bar | 3 | nos | pokhriya.188k | 120 | |
| 15 | MOVABLE CLIMBING HOLDS | MOVABLE CLIMBING HOLDS | 250 | nos | pokhriya.188k | 120 | |
| 16 | Providing Seat Harness | Providing Seat Harness | 5 | nos | pokhriya.188k | 120 | |
| 17 | STATIC ROPE 10 MM | STATIC ROPE 10 MM | 200 | mt | pokhriya.188k | 120 | |
| 18 | CARABINER | CARABINER | 10 | nos | pokhriya.188k | 120 | |
| 19 | Providing bracket FdotOdot8 bracket | Providing bracket FdotOdot8 bracket | 10 | nos | pokhriya.188k | 120 | |
| 20 | Providing MITTON | Providing MITTON | 15 | pair | pokhriya.188k | 120 | |
| 21 | Gri Gri | Gri Gri | 3 | nos | pokhriya.188k | 120 | |
| 22 | Providing Quick Draw | Providing Quick Draw | 10 | nos | pokhriya.188k | 120 | |
| 23 | 30mm Manila Rope | 30mm Manila Rope | 100 | mtr | pokhriya.188k | 120 |
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Corrigendum Updates
1 Update Update
Extended Deadline
13-Jun-2025, 9:00 am
Opening Date
13-Jun-2025, 9:30 am
Reverse Auction Schedule
Start
28-Jun-2025, 9:00 pm
End
30-Jun-2025, 8:00 pm
Duration: 47 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | AGARWAL ARMY STORES Under PMA | - | 09-06-2025 16:10:15 | |
| 2 | Arnima Ventures LLP Under PMA | - | 07-06-2025 20:38:43 | |
| 3 | BAAM DEVELOPER Under PMA | - | 09-06-2025 13:10:32 | |
| 4 | HAWK ADVENTURE Under PMA | - | 10-06-2025 15:09:31 | |
| 5 | M/S DOON ARMY TRADERS Under PMA | - | 09-06-2025 16:42:11 | |
| 6 | M/S HIMANSHU ENTERPRISES Under PMA | - | 09-06-2025 14:13:52 | |
| 7 | MODERN ENGINEERING WORKS Under PMA | - | 12-06-2025 22:24:19 | |
| 8 | NORTH EAST SUNINFOTECH PRIVATE LIMITED Under PMA | - | 12-06-2025 18:53:17 | |
| 9 | STEPIN ADVENTURE Under PMA | - | 06-06-2025 18:07:28 | |
| 10 | WILD VENTURES Under PMA | - | 08-06-2025 16:54:07 | |
| 11 | X LIMITZ ADVENTURE WORLD PRIVATE LIMITED Under PMA | - | 07-06-2025 19:19:04 |
Reverse Auction Results Final Prices
These are the final prices after the reverse auction event. Prices may be lower than initial bids.
| Rank | Seller | Final Price | Item |
|---|---|---|---|
| L1 | X LIMITZ ADVENTURE WORLD PRIVATE LIMITED(MSE,MII) Under PMA Winner | ₹39,93,000 | Item Categories : Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation |
| L2 | BAAM DEVELOPER (MSE,MII) Under PMA | ₹39,97,480 | Item Categories : Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation |
| L3 | WILD VENTURES (MSE,MII) Under PMA | ₹40,81,010 | Item Categories : Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation |
🎉 L1 Winner
X LIMITZ ADVENTURE WORLD PRIVATE LIMITED(MSE,MII) Under PMA
Final Price: ₹39,93,000
Frequently Asked Questions
Key insights about WEST BENGAL tender market
What are the eligibility requirements for this tender?
The eligibility requirements include being a registered entity capable of performing construction work. Interested parties must have a demonstrable past performance record in similar projects, ensuring they meet both technical and financial criteria of the tender. Bidders should also provide documentation proving financial stability, relevant experiences in similar contracts, and comply with the specific requirements mentioned within the tender documentation.
What certificates are required to submit a bid?
Bidders must possess relevant construction licenses and documentation, including registration certificates, tax compliance certificates, and other professional qualifications. Additionally, bidders might be required to submit certifications related to the quality of materials and processes to validate compliance with industry standards.
How can a company register for participation in this tender?
Companies can register by visiting the official procurement platform where this tender is hosted. The registration process typically involves filling out required forms, submitting necessary documents, and agreeing to the terms and conditions set forth within the tender documentation. Ensuring that all registrations are completed prior to the bid submission deadline is essential.
What are the performance security requirements for this tender?
Bidders may be required to furnish a performance security deposit, often calculated as a percentage of the total bid amount. This performance security aims to ensure compliance with the terms of contract execution, mitigating the risk of default by the contractor during or after project completion.
What benefits do Micro, Small, and Medium Enterprises (MSEs) receive in this tender?
MSEs can benefit from relaxed eligibility criteria, as well as preferential pricing and support in obtaining contracts. These provisions support the growth and sustainability of smaller businesses by enhancing their capability to compete in government tenders, contributing to a more diverse procurement landscape.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-7796451.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS