Invitation to Bid - Welding by gas or electric,Structural steel work including the supply,Providing and fixing pre-coat in ETAH, UTTAR PRADESH
Bid Publish Date
19-Aug-2026, 10:25 am
Bid End Date
02-Sep-2026, 2:00 pm
EMD
₹78,000
Value
₹46,33,081
Location
Progress
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited (uprvunl) Lucknow announces a tender for Welding by gas or electric, Structural steel work including the supply, Providing and fixing pre-coated galvanized iron profile sheets, Applying priming coat, Painting with synthetic enamel paint in ETAH, UTTAR PRADESH. Quantity: 37440. Submission Deadline: 02-09-2026 14: 00: 00. Last date to apply is approaching fast!
Tender Data
Bid Details
Quantity
37440
Category
Welding by gas or electric
Bid Type
Two Packet Bid
Bid Validity
120 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
No
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
12
Past Performance
40 %
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Welding by gas or electric , Structural steel work including the supply , Providing and fixing pre-coated galvanized iron profile sheets , Applying priming coat , Painting with synthetic enamel paint
Advisory Bank
PUNJAB NATIONAL BANK
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
45
Delivery Locations
1
Delivery Cities
Etah
Delivery Pincodes
207001
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Abhinav Pandya | 207001,Jawaharpur Thermal Power Plant | Etah | Uttar Pradesh | 207001 | 2000 | 45 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9760664.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
5 Items Sign in to view GEM price trends Sign in for GEM prices
Welding by gas or electric
Welding by gas or electric plant including transportation of plant at site etc. complete.
Structural steel work including the supply
Structural steel work including the supply in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position, including transporting and applying a priming coat of approved steel primer all complete.
Providing and fixing pre-coated galvanized iron profile sheets
Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS- 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Applying priming coat
Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works
Painting with synthetic enamel paint
Painting with synthetic enamel paint of approved brand and manufacture of required colour on steel galvanized iron/steel works - One or more coats on old work.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Welding by gas or electric | Welding by gas or electric plant including transportation of plant at site etc. complete. | 2,000 | rm | ee_sd_jawaharpur | 45 | |
| 2 | Structural steel work including the supply | Structural steel work including the supply in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position, including transporting and applying a priming coat of approved steel primer all complete. | 33,000 | kg | ee_sd_jawaharpur | 45 | |
| 3 | Providing and fixing pre-coated galvanized iron profile sheets | Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS- 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,800 | sqm | ee_sd_jawaharpur | 45 | |
| 4 | Applying priming coat | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works | 320 | sqm | ee_sd_jawaharpur | 45 | |
| 5 | Painting with synthetic enamel paint | Painting with synthetic enamel paint of approved brand and manufacture of required colour on steel galvanized iron/steel works - One or more coats on old work. | 320 | sqm | ee_sd_jawaharpur | 45 |
Categories
51
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
Additional Doc 1 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer