Closed GEM

Open Tender for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in RAJAURI, JAMMU & KASHMIR

Bid Publish Date

18-Aug-2026, 3:35 pm

Bid End Date

29-Aug-2026, 4:00 pm

EMD

₹10,000

Location

RAJOURI , JAMMU AND KASHMIR

WhatsApp Generate Docs

Progress

Issue18-Aug-2026, 3:35 pm

AwardPending

Public procurement opportunity for Indian Army Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Metal Alloy Casting Water Tap with Aerator (V2) (Q3), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), Towel Rail (Q3), Bathroom Water Shower (V2) (Q3), Health Faucet (Q3), Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2), Soap Dish - Case (Q4), Floor Drain Traps (V2) (Q3), Bathroom or Toilet Mirror (V3) (Q4), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), Flexible Drain Hoses for Wash Basins/ Sinks (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Towel Ring (Q3), dead plug and cap 20mm, dead pug end cap 15mm, Elbow GI 15 mm, Elbow Reducing GI 20x15 mm, GI reducer Socket 20x15 mm bore, GI reducer Socket 25 x15 mm bore, GI bend 15mm bore, GI bend 20mm bore, GI bend 25 mm bore, GI bend 40 mm bore, GI bend 50 mm bore, GI Elbow 20mm bore, GI Nipple 15mm bore 100mm long, GI Nipple 15mm bore 50mm long, GI Nipple 15mm bore 75mm long, GI Nipple 20mm bore 150mm long, GI Nipple 20mm bore 75mm long, GI Nipple 20x50 mm, GI Nipple 20x75 mm, GI Nipple 25 mm bore 100 mm long, GI Socket 15mm bore, GI Socket 20mm bore, GI Socket 25 mm bore 100 mm long, GI Tank Nipple 15 mm, GI Tank Nipple 20 mm, GI Tee 15mm bore, GI Tee 25mm bore, GI Tee Reducer 20 x 15mm, GI Union 15mm bore, Nipple GI 15x150 mm, Nipple GI 20x100 mm, Nipple GI 20x150 mm, Tee equal GI 20 mm, Union GI 20 mm, Union GI 25 mm, Stop valve 25 mm brass External threaded, Stop valve 25 mm brass Internal threaded, S and S Combination P T 6 Amp 3 Pin and 5 Pin, Geyser assembly 6 hole, Geyser assembly 9 hole, Modular Socket, 6 Amp 2 or 3 Pin Combined 2 Module, Modular Socket 6A or16A and 2 or3 Pin Combined 2 Module, Modular Switch Socket Combination 16 Amp 6 Pin 2 Module, Oil bound Distemper of 10kg pack each, Painting brush of size 50mm, Painting brush of size 75mm, PVC bend 110 mm dia, PVC bend pipe 75mm dia, PVC pipe 110mm dia, Rat tale door closer, S S Combination P T 16 Amp 3 Pin and 5 Pin, Solvent solution 500 ml, Spindle for stop cock brass 20 mm internal threaded, Spindle for stop cock brass15 mm internal threaded in RAJAURI, JAMMU & KASHMIR. Quantity: 1008 issued by. Submission Deadline: 29-08-2026 16: 00: 00. View full details and respond.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Tender Data

Bid Details

Quantity

1008

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

Past Performance

50 %

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Metal Alloy Casting Water Tap with Aerator (V2) (Q3) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Towel Rail (Q3) , Bathroom Water Shower (V2) (Q3) , Health Faucet (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) , Soap Dish - Case (Q4) , Floor Drain Traps (V2) (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Towel Ring (Q3) , dead plug and cap 20mm , dead pug end cap 15mm , Elbow GI 15 mm , Elbow Reducing GI 20x15 mm , GI reducer Socket 20x15 mm bore , GI reducer Socket 25 x15 mm bore , GI bend 15mm bore , GI bend 20mm bore , GI bend 25 mm bore , GI bend 40 mm bore , GI bend 50 mm bore , GI Elbow 20mm bore , GI Nipple 15mm bore 100mm long , GI Nipple 15mm bore 50mm long , GI Nipple 15mm bore 75mm long , GI Nipple 20mm bore 150mm long , GI Nipple 20mm bore 75mm long , GI Nipple 20x50 mm , GI Nipple 20x75 mm , GI Nipple 25 mm bore 100 mm long , GI Socket 15mm bore , GI Socket 20mm bore , GI Socket 25 mm bore 100 mm long , GI Tank Nipple 15 mm , GI Tank Nipple 20 mm , GI Tee 15mm bore , GI Tee 25mm bore , GI Tee Reducer 20 x 15mm , GI Union 15mm bore , Nipple GI 15x150 mm , Nipple GI 20x100 mm , Nipple GI 20x150 mm , Tee equal GI 20 mm , Union GI 20 mm , Union GI 25 mm , Stop valve 25 mm brass External threaded , Stop valve 25 mm brass Internal threaded , S and S Combination P T 6 Amp 3 Pin and 5 Pin , Geyser assembly 6 hole , Geyser assembly 9 hole , Modular Socket, 6 Amp 2 or 3 Pin Combined 2 Module , Modular Socket 6A or16A and 2 or3 Pin Combined 2 Module , Modular Switch Socket Combination 16 Amp 6 Pin 2 Module , Oil bound Distemper of 10kg pack each , Painting brush of size 50mm , Painting brush of size 75mm , PVC bend 110 mm dia , PVC bend pipe 75mm dia , PVC pipe 110mm dia , Rat tale door closer , S S Combination P T 16 Amp 3 Pin and 5 Pin , Solvent solution 500 ml , Spindle for stop cock brass 20 mm internal threaded , Spindle for stop cock brass15 mm internal threaded

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Rajauri

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Rajauri	Rajauri	-	-	6	15	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 55

GeM-Bidding-9758566.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

CATALOG-Specification-39

CATALOG Specification

CATALOG-Specification-40

CATALOG Specification

CATALOG-Specification-41

CATALOG Specification

CATALOG-Specification-42

CATALOG Specification

CATALOG-Specification-43

CATALOG Specification

CATALOG-Specification-44

CATALOG Specification

CATALOG-Specification-45

CATALOG Specification

CATALOG-Specification-46

CATALOG Specification

CATALOG-Specification-47

CATALOG Specification

CATALOG-Specification-48

CATALOG Specification

CATALOG-Specification-49

CATALOG Specification

CATALOG-Specification-50

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 54 Items Sign in to view GEM price trends Sign in for GEM prices

dead plug and cap 20mm

4 pieces Delivery: 15 days

dead pug end cap 15mm

4 pieces Delivery: 15 days

Elbow GI 15 mm

16 pieces Delivery: 15 days

Elbow Reducing GI 20x15 mm

4 pieces Delivery: 15 days

GI reducer Socket 20x15 mm bore

9 pieces Delivery: 15 days

GI reducer Socket 25 x15 mm bore

5 pieces Delivery: 15 days

GI bend 15mm bore

6 pieces Delivery: 15 days

GI bend 20mm bore

3 pieces Delivery: 15 days

GI bend 25 mm bore

3 pieces Delivery: 15 days

#10

GI bend 40 mm bore

2 pieces Delivery: 15 days

#11

GI bend 50 mm bore

1 pieces Delivery: 15 days

#12

GI Elbow 20mm bore

13 pieces Delivery: 15 days

#13

GI Nipple 15mm bore 100mm long

12 pieces Delivery: 15 days

#14

GI Nipple 15mm bore 50mm long

13 pieces Delivery: 15 days

#15

GI Nipple 15mm bore 75mm long

17 pieces Delivery: 15 days

#16

GI Nipple 20mm bore 150mm long

9 pieces Delivery: 15 days

#17

GI Nipple 20mm bore 75mm long

7 pieces Delivery: 15 days

#18

GI Nipple 20x50 mm

3 pieces Delivery: 15 days

#19

GI Nipple 20x75 mm

4 pieces Delivery: 15 days

#20

GI Nipple 25 mm bore 100 mm long

1 pieces Delivery: 15 days

#21

GI Socket 15mm bore

9 pieces Delivery: 15 days

#22

GI Socket 20mm bore

9 pieces Delivery: 15 days

#23

GI Socket 25 mm bore 100 mm long

5 pieces Delivery: 15 days

#24

GI Tank Nipple 15 mm

6 pieces Delivery: 15 days

#25

GI Tank Nipple 20 mm

5 pieces Delivery: 15 days

#26

GI Tee 15mm bore

17 pieces Delivery: 15 days

#27

GI Tee 25mm bore

1 pieces Delivery: 15 days

#28

GI Tee Reducer 20 x 15mm

3 pieces Delivery: 15 days

#29

GI Union 15mm bore

8 pieces Delivery: 15 days

#30

Nipple GI 15x150 mm

5 pieces Delivery: 15 days

#31

Nipple GI 20x100 mm

3 pieces Delivery: 15 days

#32

Nipple GI 20x150 mm

4 pieces Delivery: 15 days

#33

Tee equal GI 20 mm

4 pieces Delivery: 15 days

#34

Union GI 20 mm

6 pieces Delivery: 15 days

#35

Union GI 25 mm

4 pieces Delivery: 15 days

#36

Stop valve 25 mm brass External threaded

6 pieces Delivery: 15 days

#37

Stop valve 25 mm brass Internal threaded

4 pieces Delivery: 15 days

#38

S and S Combination P T 6 Amp 3 Pin and 5 Pin

156 pieces Delivery: 15 days

#39

Geyser assembly 6 hole

2 pieces Delivery: 15 days

#40

Geyser assembly 9 hole

4 pieces Delivery: 15 days

#41

Modular Socket, 6 Amp 2 or 3 Pin Combined 2 Module

16 pieces Delivery: 15 days

#42

Modular Socket 6A or16A and 2 or3 Pin Combined 2 Module

2 pieces Delivery: 15 days

#43

Modular Switch Socket Combination 16 Amp 6 Pin 2 Module

18 pieces Delivery: 15 days

#44

Oil bound Distemper of 10kg pack each

6 pieces Delivery: 15 days

#45

Painting brush of size 50mm

4 pieces Delivery: 15 days

#46

Painting brush of size 75mm

4 pieces Delivery: 15 days

#47

PVC bend 110 mm dia

8 pieces Delivery: 15 days

#48

PVC bend pipe 75mm dia

8 pieces Delivery: 15 days

#49

PVC pipe 110mm dia

8 rm Delivery: 15 days

#50

Rat tale door closer

6 pieces Delivery: 15 days

#51

S S Combination P T 16 Amp 3 Pin and 5 Pin

130 pieces Delivery: 15 days

#52

Solvent solution 500 ml

2 pieces Delivery: 15 days

#53

Spindle for stop cock brass 20 mm internal threaded

8 pieces Delivery: 15 days

#54

Spindle for stop cock brass15 mm internal threaded

16 pieces Delivery: 15 days

Item #	Title	Description	Quantity	Unit	Consignee	Delivery (Days)
1	dead plug and cap 20mm	dead plug and cap 20mm	4	pieces	[email protected]	15
2	dead pug end cap 15mm	dead pug end cap 15mm	4	pieces	[email protected]	15
3	Elbow GI 15 mm	Elbow GI 15 mm	16	pieces	[email protected]	15
4	Elbow Reducing GI 20x15 mm	Elbow Reducing GI 20x15 mm	4	pieces	[email protected]	15
5	GI reducer Socket 20x15 mm bore	GI reducer Socket 20x15 mm bore	9	pieces	[email protected]	15
6	GI reducer Socket 25 x15 mm bore	GI reducer Socket 25 x15 mm bore	5	pieces	[email protected]	15
7	GI bend 15mm bore	GI bend 15mm bore	6	pieces	[email protected]	15
8	GI bend 20mm bore	GI bend 20mm bore	3	pieces	[email protected]	15
9	GI bend 25 mm bore	GI bend 25 mm bore	3	pieces	[email protected]	15
10	GI bend 40 mm bore	GI bend 40 mm bore	2	pieces	[email protected]	15
11	GI bend 50 mm bore	GI bend 50 mm bore	1	pieces	[email protected]	15
12	GI Elbow 20mm bore	GI Elbow 20mm bore	13	pieces	[email protected]	15
13	GI Nipple 15mm bore 100mm long	GI Nipple 15mm bore 100mm long	12	pieces	[email protected]	15
14	GI Nipple 15mm bore 50mm long	GI Nipple 15mm bore 50mm long	13	pieces	[email protected]	15
15	GI Nipple 15mm bore 75mm long	GI Nipple 15mm bore 75mm long	17	pieces	[email protected]	15
16	GI Nipple 20mm bore 150mm long	GI Nipple 20mm bore 150mm long	9	pieces	[email protected]	15
17	GI Nipple 20mm bore 75mm long	GI Nipple 20mm bore 75mm long	7	pieces	[email protected]	15
18	GI Nipple 20x50 mm	GI Nipple 20x50 mm	3	pieces	[email protected]	15
19	GI Nipple 20x75 mm	GI Nipple 20x75 mm	4	pieces	[email protected]	15
20	GI Nipple 25 mm bore 100 mm long	GI Nipple 25 mm bore 100 mm long	1	pieces	[email protected]	15
21	GI Socket 15mm bore	GI Socket 15mm bore	9	pieces	[email protected]	15
22	GI Socket 20mm bore	GI Socket 20mm bore	9	pieces	[email protected]	15
23	GI Socket 25 mm bore 100 mm long	GI Socket 25 mm bore 100 mm long	5	pieces	[email protected]	15
24	GI Tank Nipple 15 mm	GI Tank Nipple 15 mm	6	pieces	[email protected]	15
25	GI Tank Nipple 20 mm	GI Tank Nipple 20 mm	5	pieces	[email protected]	15
26	GI Tee 15mm bore	GI Tee 15mm bore	17	pieces	[email protected]	15
27	GI Tee 25mm bore	GI Tee 25mm bore	1	pieces	[email protected]	15
28	GI Tee Reducer 20 x 15mm	GI Tee Reducer 20 x 15mm	3	pieces	[email protected]	15
29	GI Union 15mm bore	GI Union 15mm bore	8	pieces	[email protected]	15
30	Nipple GI 15x150 mm	Nipple GI 15x150 mm	5	pieces	[email protected]	15
31	Nipple GI 20x100 mm	Nipple GI 20x100 mm	3	pieces	[email protected]	15
32	Nipple GI 20x150 mm	Nipple GI 20x150 mm	4	pieces	[email protected]	15
33	Tee equal GI 20 mm	Tee equal GI 20 mm	4	pieces	[email protected]	15
34	Union GI 20 mm	Union GI 20 mm	6	pieces	[email protected]	15
35	Union GI 25 mm	Union GI 25 mm	4	pieces	[email protected]	15
36	Stop valve 25 mm brass External threaded	Stop valve 25 mm brass External threaded	6	pieces	[email protected]	15
37	Stop valve 25 mm brass Internal threaded	Stop valve 25 mm brass Internal threaded	4	pieces	[email protected]	15
38	S and S Combination P T 6 Amp 3 Pin and 5 Pin	S and S Combination P T 6 Amp 3 Pin and 5 Pin	156	pieces	[email protected]	15
39	Geyser assembly 6 hole	Geyser assembly 6 hole	2	pieces	[email protected]	15
40	Geyser assembly 9 hole	Geyser assembly 9 hole	4	pieces	[email protected]	15
41	Modular Socket, 6 Amp 2 or 3 Pin Combined 2 Module	Modular Socket, 6 Amp 2 or 3 Pin Combined 2 Module	16	pieces	[email protected]	15
42	Modular Socket 6A or16A and 2 or3 Pin Combined 2 Module	Modular Socket 6A or16A and 2 or3 Pin Combined 2 Module	2	pieces	[email protected]	15
43	Modular Switch Socket Combination 16 Amp 6 Pin 2 Module	Modular Switch Socket Combination 16 Amp 6 Pin 2 Module	18	pieces	[email protected]	15
44	Oil bound Distemper of 10kg pack each	Oil bound Distemper of 10kg pack each	6	pieces	[email protected]	15
45	Painting brush of size 50mm	Painting brush of size 50mm	4	pieces	[email protected]	15
46	Painting brush of size 75mm	Painting brush of size 75mm	4	pieces	[email protected]	15
47	PVC bend 110 mm dia	PVC bend 110 mm dia	8	pieces	[email protected]	15
48	PVC bend pipe 75mm dia	PVC bend pipe 75mm dia	8	pieces	[email protected]	15
49	PVC pipe 110mm dia	PVC pipe 110mm dia	8	rm	[email protected]	15
50	Rat tale door closer	Rat tale door closer	6	pieces	[email protected]	15
51	S S Combination P T 16 Amp 3 Pin and 5 Pin	S S Combination P T 16 Amp 3 Pin and 5 Pin	130	pieces	[email protected]	15
52	Solvent solution 500 ml	Solvent solution 500 ml	2	pieces	[email protected]	15
53	Spindle for stop cock brass 20 mm internal threaded	Spindle for stop cock brass 20 mm internal threaded	8	pieces	[email protected]	15
54	Spindle for stop cock brass15 mm internal threaded	Spindle for stop cock brass15 mm internal threaded	16	pieces	[email protected]	15

Categories 64

FLUID MECHANICS EQUIPMENT PVC PIPE AD FILM SERVICES FITMENT RADIAL DRILLING MACHINE SLUICE VALVE ANGLE FALL PROTECTION LANYARD ROTATING PISTON PUMPS BATHROOM SET BEARING HOLDERS BARITONE HORNS MISCELLANEOUS VALVE PAINTING COPPER COIL STEEL DOOR ANGLE GLOBE VALVES RING SECURITY HARDWARE VALVES ALLOY MANUFACTURING MACHINERY GATE VALVES SANITARY WARE AIR CYLINDERS RETURN ROLLER RETURN ROLLER FLAT TOWEL VALVE SANITARY FITTING WATER SUPPLY MATERIAL FILTER RETAINERS ARC VALVE GEYSER COMMUNICATION PROTOCOL FERROUS ALLOY SUPPLY DISTEMPER BED MILLING MACHINE SLIDER VALVES MODULAR SWITCH PLUMBER BLOCK ANGLE COCK ELBOW COPPER ALLOY TRANSITION METALS BOILER MOUNTING VALVE MUSICAL INSTRUMENT PARTS AND ACCESSORIES WATER TRANSMISSION PLASTIC COPPER SHEET MILITARY VEHICLE VALVE PARTS AND ACCESSORIES SOCKET VIDEO FILM BOILER VALVE PIPES UPVC PIPE BUFFER DOOR BLANKING PLUGS METAL PRODUCTS METALLURGY TEE HYDRAULIC BRAKE

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 50 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #2 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #3 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Forged brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #4 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #5 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #6 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass, Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #7 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Single lever pillar mounted basin mixture
Type	Dimension	As per table 12 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods, Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	24

Item #8 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Single lever pillar mounted basin mixture
Type	Dimension	As per table 12 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	24

Item #9 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	24

Item #10 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #11 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass, Forged brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #12 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Single lever pillar mounted sink mixture with swivel spout
Type	Dimension	As per table 11 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #13 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #14 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Acrylonitrille butadiene rubber (ABR)
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #15 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Acrylonitrille butadiene rubber (ABR)
Material	Material of Knob and knob components	Plastic
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #16 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #17 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PVC (conforming to 9766)
Materials	Material of Bonnet of Tap/ Valve	ABS
Materials	Material of Spindle of Tap/ Valve	ABS
Materials	Material of Handle of Tap/ Valve	ABS
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Item #18 Details

View Catalog

Category	Specification	Requirement
ITEM	Tap Mounting Type	Disc tap
Material	Material	Brass
Description	Type of Faucet	Multi Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	15

Item #19 Details

View Catalog

Category	Specification	Requirement
ITEM	Tap Mounting Type	Ball tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	20

Item #20 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #21 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	450 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Flat
Load & Performance	Recommended Load Capacity (in kg)	3–6 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #22 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	22 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #23 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	75 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	150
Warranty	Warranty (in Years)	1

Item #24 Details

View Catalog

Category	Specification	Requirement
Generic	Pressure rating (Bar)	1
Generic	Flow Rate , Minimum (lpm)	8, 9, 10, 11 Or higher
Material & Construction	Material of construction	Brass
Material & Construction	Hose Material	Stainless Steel
Material & Construction	Hose length ( in meters)	1.5
Material & Construction	Handle Type	Lever
Material & Construction	Anti bacterial coating	No

Item #25 Details

View Catalog

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl without drainer
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	Yes
Test Report	Test Report to be furnished to the buyer on demand	Yes

Item #26 Details

View Catalog

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	Yes

Item #27 Details

View Catalog

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	NOT APPLICABLE
Lid Details	Lid type (according to fixation)	HINGED

Item #28 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	No
Design & Construction	Anti-Odor Feature	Yes
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	150 mm x 150 mm x 100 mm
Performance	Flow Rate Capacity	Medium Duty

Item #29 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Clamp Support
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Item #30 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Stainless Steel
Generic	Frame Color	Silver
Generic	Mirror Mounting / Fixing System	Holes with Screws
Dimensions	Width/Diameter of Mirror (inch)	>7.5 to ≤10
Dimensions	Height/Diameter of Mirror (inch)	>10 to ≤12.5
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Item #31 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Material for Overflow Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Item #32 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Slip-on
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Material & Construction	Colour	White
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Medium Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Item #33 Details

View Catalog

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	40 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	2 mm
Performance & Usage	Durability Grade	Medium Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Item #34 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Stainless Steel
End Connections & Fittings	Surface Finish	Nickel Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #35 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	High Tensile Brass (conforming to HT1 or HT2 of IS 320)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #36 Details

View Catalog

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polystyrene
Material	Materials of Hinging Device	Suitable Plastic(with reinforcement)
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 2

Item #37 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Stop valve with external thread
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #38 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Stop valve with internal thread
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	20
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #39 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Stop Valve
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	ABS-PC Alloy
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Stop Valves (As per Table 5 of IS 9763)

Item #40 Details

View Catalog

Category	Specification	Requirement
Generic	Ring Shape	D-Shape
Material & Dimensions	Ring Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	200 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	12 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	100 mm
Material & Dimensions	Mounting Plate Size (in mm)	80 mm
Design & Configuration	Ring Movement Type	Swing Ring
Load & Performance	Recommended Load Capacity (in kg)	Above 5 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Galvanized Steel

Item #41 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Shower Panel
Type	Material of body/face plate	Stainless Steel
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Rainfall and Multiple flow
Type	Type of Multiple flow	Massage, Cascade, Mist, Whirl, Monorail, Rainflow, Rainstream
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	65x 95 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	2

Item #42 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Aluminium
Generic	Frame Color	Silver
Generic	Mirror Mounting / Fixing System	Holes with Screws
Dimensions	Width/Diameter of Mirror (inch)	>12.5 to ≤15
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Item #43 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	PVC Coated Stainless Steel Braid
Dimensions	Nominal Bore Size (in mm)	8 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	900 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Push‑Fit Quick Connect
End Connections & Fittings	End Fitting Material	PVC (Polyvinyl Chloride)
End Connections & Fittings	Surface Finish	Chrome Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #44 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Stainless Steel (Corrugated)
Material & Construction	Cover Material	Stainless Steel Braided (SS 304)
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	600 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut with Nipple
End Connections & Fittings	End Fitting Material	Brass
End Connections & Fittings	Surface Finish	Nickel Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #45 Details

View Catalog

Category	Specification	Requirement
ITEM	Tap Mounting Type	Ball tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Plastic
Dimension	Nominal Thread Size of Tap (mm)	20

Item #46 Details

View Catalog

Category	Specification	Requirement
ITEM	Tap Mounting Type	Disc tap
Material	Material	Brass
Description	Type of Faucet	Multi Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	15

Item #47 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Folding Rail
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #48 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Square
Dimensions	Size of Shower	150 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Item #49 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4.5 to ≤5

Item #50 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Close Coupled Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Any other Corrosion-resistant Material
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

JAMMU AND KASHMIR State tenders

RAJOURI , JAMMU AND KASHMIR City tenders

Categories 4 available

FLUID MECHANICS EQUIPMENT

PVC PIPE

AD FILM

SERVICES

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Open Tender for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in RAJAURI, JAMMU & KASHMIR

Authority & Contact

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 55

GeM-Bidding-9758566.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

CATALOG-Specification-39

CATALOG-Specification-40

CATALOG-Specification-41

CATALOG-Specification-42

CATALOG-Specification-43

CATALOG-Specification-44

CATALOG-Specification-45

CATALOG-Specification-46

CATALOG-Specification-47

CATALOG-Specification-48

CATALOG-Specification-49

CATALOG-Specification-50

BOQ Document

BOQ Document

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Bill of Quantities (BOQ) 54 Items Sign in to view GEM price trends Sign in for GEM prices

Categories 64

Required Documents

Technical Specifications 50 Items

Item #1 Details

Item #2 Details

Item #3 Details