Active GEM

Open Tender for Tower Bolts (Non-Ferrous Metals) V2 as per IS 204,Tower Bolts (Non-Ferrous Metals) V2 as per IS 204 in RAIGAD, MAHARASHTRA

Bid Publish Date

31-Aug-2026, 3:56 pm

Bid End Date

10-Sep-2026, 3:00 pm

EMD

₹35,800

Location

RAIGAD , MAHARASHTRA

WhatsApp Generate Docs

Progress

Issue31-Aug-2026, 3:56 pm

AwardPending

Indian Army announces a tender for Tower Bolts (Non-Ferrous Metals) V2 as per IS 204 (Q2), Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3), (Vitreous China) - Washdown Water Closets as per IS 2556 (Q3), Wash Basins - Vitreous Sanitary Appliances (Vitreous China) conforming to IS 2556 (Part 4) (Q3), Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2), Bathroom Water Shower (V2) (Q3), Towel Rail (Q3), Health Faucet (Q3), Bathroom or Toilet Mirror (V3) (Q4), Plywood for General Purposes Marked to IS 303 (V3) (Q2) in RAIGAD, MAHARASHTRA. Quantity: 792. Submission Deadline: 10-09-2026 15: 00: 00. Last date to apply is approaching fast!

Tender Data

Bid Details

Quantity

792

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Yes

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

597

OEM Avg. Turnover

Past Performance

30 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Tower Bolts (Non-Ferrous Metals) V2 as per IS 204 (Q2) , Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , (Vitreous China) - Washdown Water Closets as per IS 2556 (Q3) , Wash Basins - Vitreous Sanitary Appliances (Vitreous China) conforming to IS 2556 (Part 4) (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) , Bathroom Water Shower (V2) (Q3) , Towel Rail (Q3) , Health Faucet (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Plywood for General Purposes Marked to IS 303 (V3) (Q2)

Advisory Bank

State Bank of India

ePBG Percentage

ePBG Duration (Months)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Raigad

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Raigad	Raigad	-	-	52	30	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 36

GeM-Bidding-9763877.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC)

Additional Doc 3 (Requested in ATC)

Additional Doc 4 (Requested in ATC)

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Category	Specification	Requirement
Generic	Governing Specification	As per IS 204
Generic	BIS Marked	Yes
Generic	Type of tower bolts as per Cl 3.1 of IS 204	Barrel Tower Bolts
Generic	Sub-type of tower bolts as per Cl 3.1 of IS 204	Aluminium Alloy Barrel Tower Bolts (Type - 4A)
MATERIAL	Material of Aluminium alloy tubes as per Table 3 of IS 204( Part 2)	designation 63400 WP or 63400 P of IS 1285
MATERIAL	Material of Aluminium alloy extruded rods as per Table 3 of IS 204( Part 2)	Designation 65032 WP of IS 733
MATERIAL	Brass sheets as per Table 3 of IS 204( Part 2)	Alloy designation CuZn 40 Condition HD of IS 410
MATERIAL	Cast brass as per Table 3 of IS 204( Part 2)	Grade CB.2 of IS 292
MATERIAL	Extruded brass as per Table 3 of IS 204( Part 2)	Type II Half hard condition of IS 319
MATERIAL	Zinc base alloy die casting as per Table 3 of IS 204 (Part 2)	Alloy Zn A14 Die casting of IS 742
Constructional	Fixing of knob with Bolt as per Cl 5.1.1 of IS 204(Part 2)	Integrated with Bolt
Constructional	Barrel tower bolts should comply as per Cl 5.2.1 of IS 204 (Part 2) (choose NA for skeleton tower bolts)	NA
Constructional	Skeleton tower bolts should comply as per Cl 5.2.2 of IS 204 (Part 2) (choose NA for Barrel tower bolts)	NA
DIMENSIONS	Length of Bolt/Barrel of Barrel Tower bolts as per Table 1 of IS 204 (Part 2) (mm)	100
DIMENSIONS	Diameter of Barrel and Skeleton Tower bolts (mm)	12.0
DIMENSIONS	Width of Barrel Tower bolts (mm)	38
DIMENSIONS	Minimum No. of equally spaced screw holes in barrel and sockets for wood screw for Barrel tower bolts	6
DIMENSIONS	Length of socket as per Table 1 of IS 204 (Part 2)	25
DIMENSIONS	Thickness of Brass or Zinc Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	2
DIMENSIONS	Thickness of Aluminium Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	2.4
DIMENSIONS	Thickness of Sheet brass Metal of Barrel as per Table 1 of IS 204 (Part2)	1-1.25
DIMENSIONS	Length of Bolt/Barrel of Skeleton tower bolts as per Table 2 of IS 204 (Part 2) (mm)	NA
DIMENSIONS	Width of Bolt plate or staple of Skeleton tower bolts (mm)	NA
DIMENSIONS	Minimum No. of screw holes for wood screw no. 4 in Skeleton tower bolts	NA
DIMENSIONS	Length of Staple in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
DIMENSIONS	Thickness of Brass Plate or socket in Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	Thickness of Aluminium Alloy or Zinc alloy Plate or Socket of Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	No of Staples in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
Marking and Packing	Packing of Barrel tower bolt shall be as per IS 8.1 of IS 204 (Part 2) (Choose NA for Skeleton tower bolts)	NA
Marking and Packing	Packing of Skeleton tower bolt shall be as per IS 8.2 of IS 204 (Part 2) (Choose NA for Barrel tower bolt)	Yes
TEST REPORT	Avaibility of Test Report from the list of approved laboratory for Tower Bolts (Non-Ferrous Metals) as per IS: 204, latest	No
TEST REPORT	Test reports to be furnished to buyer on demand	Yes

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Brass rods
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	36

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Double Layered
Dimensions	Minimum Net Capacity (In Liter)	500 Liter

Category	Specification	Requirement
Generic	Confirming to IS 2556 (Part 4)	Yes
Generic	Pattern	Flat Back
Dimensions	Size of Wash Basin (in mm)	550 mm × 400 mm x 290 mm
Dimensions	Tap Hole Options	Centre Tap Hole
Dimensions	Connecting Dimensions for Wash Basin	As per Table 4 of IS 2556 (Part 4)
Dimensions	Fixing Dimensions for Wall Hung Wash Basin	As per Table 6 of IS 2556 (Part 4)

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
Test Report	Test Report to be furnished to the buyer on demand	Yes

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	120 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Folding Rail
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Generic	Pressure rating (Bar)	0.75
Generic	Flow Rate , Minimum (lpm)	9, 10, 11 Or higher
Material & Construction	Material of construction	ABS
Material & Construction	Hose Material	Stainless Steel
Material & Construction	Hose length ( in meters)	1
Material & Construction	Handle Type	Lever
Material & Construction	Anti bacterial coating	No

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>5 to ≤7.5

Category	Specification	Requirement
Material & Dimensions	Rail Material	PVC Plastic
Material & Dimensions	Mounting Bracket Material	PVC Plastic
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Plastic

Category	Specification	Requirement
STANDARDS AND CERTIFICATIONS	Governing Standard	Conformity to IS 303
GENERAL REQUIREMENTS	Grade of Plywood depending on bond strength	BWR (Boiling Water Resistant) grade
GENERAL REQUIREMENTS	Class of Plywood in terms of formaldehyde class	Formaldehyde Class - E2
DIMENSIONS AND TOLERANCES	Width of Plywood (Tolerance: +3 mm / -1 mm)	915 mm
DIMENSIONS AND TOLERANCES	Length of Plywood (Tolerance: +6 mm / -3 mm)	2135 mm
DIMENSIONS AND TOLERANCES	Thickness of Plywood boards	12 mm

Category	Specification	Requirement
STANDARDS AND CERTIFICATIONS	Governing Standard	Conformity to IS 303
GENERAL REQUIREMENTS	Grade of Plywood depending on bond strength	MR (Moisture Resistant) grade
GENERAL REQUIREMENTS	Class of Plywood in terms of formaldehyde class	Formaldehyde Class - E2
DIMENSIONS AND TOLERANCES	Width of Plywood (Tolerance: +3 mm / -1 mm)	1220 mm
DIMENSIONS AND TOLERANCES	Length of Plywood (Tolerance: +6 mm / -3 mm)	2440 mm
DIMENSIONS AND TOLERANCES	Thickness of Plywood boards	12 mm

Category	Specification	Requirement
STANDARDS AND CERTIFICATIONS	Governing Standard	Conformity to IS 303
GENERAL REQUIREMENTS	Grade of Plywood depending on bond strength	BWR (Boiling Water Resistant) grade
GENERAL REQUIREMENTS	Class of Plywood in terms of formaldehyde class	Formaldehyde Class - E2
DIMENSIONS AND TOLERANCES	Width of Plywood (Tolerance: +3 mm / -1 mm)	1220 mm
DIMENSIONS AND TOLERANCES	Length of Plywood (Tolerance: +6 mm / -3 mm)	2440 mm
DIMENSIONS AND TOLERANCES	Thickness of Plywood boards	19 mm

Browse Tenders

Categories

States

Cities

Authorities

Open Tender for Tower Bolts (Non-Ferrous Metals) V2 as per IS 204,Tower Bolts (Non-Ferrous Metals) V2 as per IS 204 in RAIGAD, MAHARASHTRA

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 36

GeM-Bidding-9763877.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Authority & Contact

Categories 31

🤖 AI-Powered Bidder Prediction

Required Documents

Technical Specifications 33 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Item #22 Details