Bid Publish Date
14-Aug-2026, 3:31 pm
Bid End Date
04-Sep-2026, 4:00 pm
EMD
₹1,60,000
Value
₹80,00,000
Location
Progress
Jammu And Kashmir State Pollution Control Board (jkspcb) invites bids for Atomic Absorption Spectrophotometer (AAS) (Q3) in JAMMU, JAMMU & KASHMIR. Quantity: 1. Submission Deadline: 04-09-2026 16: 00: 00. Submit your proposal before the deadline.
Quantity
1
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
50% Lowest Priced Technically Qualified Bidders
Tech Clarification Time
3 Days
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
No
Bid Splitting Applied
No
Min. Avg. Annual Turnover
40
OEM Avg. Turnover
160
Past Performance
80 %
Warranty Period
2 years
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Atomic Absorption Spectrophotometer (AAS) (Q3)
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
24
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Pre-Bid Date
19-08-2026 15:00:00
Pre-Bid Venue
Office of Regional Director, Pollution Control Committee, Narwal, Jammu, J&K
Max Delivery Days
40
Delivery Locations
1
Delivery Cities
Jammu
Delivery Pincodes
180006
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Narinder Singh | 180006,Regional Director, JKPollution Control Committee, Parviesh Bhawan, Gladni, Transport Nagar, Narwal Jammu | Jammu | Jammu And Kashmir | 180006 | 1 | 40 | - |
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Main Document
CATALOG Specification
GEM_GENERAL_TERMS_AND_CONDITIONS
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type of Atomic Absorption Spectrometer (AAS) | Double beam |
| TYPE | Monochromator type | Czerny-turner |
| TYPE | Detector Type | Photo Multiplier Tube (PMT) |
| SPECTRAL | Source Wavelength - Minimum | 185.0 |
| SPECTRAL | Source Wavelength - Maximum | 900.0 |
| SPECTRAL | Accuracy (+/-) | 0.05 |
| SPECTRAL | Repeatability | 0.05 |
| SPECTRAL | Diffraction grating (lines/mm) | 1800 |
| SPECTRAL | Wavelength setting and scanning | Automatic |
| SPECTRAL | Slit width Adjustment | Automatic |
| SPECTRAL | Resolution (nm/mm) | 0.1 |
| SPECTRAL | Bandwidth (nm) | 0.1-1.0 |
| SPECTRAL | Focal length (mm) | 250 to 299 |
| LIGHT SOURCE | Type of HCL | Both Single and Mulitiple Element |
| LIGHT SOURCE | Number of Single element HCLs supplied (inclusive in the scope of supply) | 10 |
| LIGHT SOURCE | Number of multiple element (alloy) HCLs supplied (inclusive in the scope of supply) | 1 |
| LIGHT SOURCE | Measuring modes (K factor and standards) | Transmittance, Absorbance, Concentration (Wavelength, time), Emission |
| LIGHT SOURCE | Detectable Elements using single element HCL | Cu, Fe, Zn, Mn, Mg, B, K, Mo, Ca, As, Na, Al, Au, Be, Ba, Bi, Cd, Ce, Co, Cr, lr, Li, Ni, Pb, Pd, Pt, Rh, Se, Si, Sn, Sr, Te, Ti, Tl, V, Zr, Hg, Sb, Ag |
| LIGHT SOURCE | Detectable Elements using multi element HCL | Na-K, Ca-Mg, Si-Al, Fe-Ni, Sr-Ba, Al-Ca-Mg, Ca-Mg-Zn, Cu-Mo-Co-Zn, Cd-Cu-Pb-Zn, Cu-Fe-Zn-Mn, Co-Cr-Cu-Fe-Mn-Ni, Cd - Hg - Pb |
| LIGHT SOURCE | Lifespan of Single element lamp (mA-Hr) | 5000 |
| LIGHT SOURCE | Lifespan of multi-element/Alloys lamp (mA-Hr) | 5000 |
| LIGHT SOURCE | Number of sockets on Turret | 8 |
| ATOMIZER | Type of atomizer | Integrated Flame Burner & GF |
| ATOMIZER | Nebulizer | Pt/Ir nebulizer |
| ATOMIZER | Background Correction | Zeeman background correction |
| ATOMIZER | Burner diameter (mm) | 50 |
| ATOMIZER | Time for analysis (sample) | 200.0 |
| GENERIC | Display | through PC |
| GENERIC | Display type | LED |
| GENERIC | Test result printing | Through external printer |
| GENERIC | If inbuilt printer, Type of printer | N/A |
| GENERIC | Safety sensors | Pressure sensor, Flame Sensor, Flame Ignition Sensor, Burner interlock, Power failure protection, Nebulizer Sensor, Auto ignition |
| GENERIC | Burner movement (lateral,horizontal & height) | Automatic |
| OPERATING CONDITIONS | Minimum Operating Temperature | 5.0 |
| OPERATING CONDITIONS | Maximum Operating Temperature | 45.0 |
| OPERATING CONDITIONS | Operating Humidity (RH) (%) at 40 degree c | 90.0 |
| ACCESSORIES | Type of gas cylinders | Nitrous oxide |
| ACCESSORIES | Type of Regulators supplied | With Heater |
| ACCESSORIES | Number of Regulators Supplied (inclusive in the scope of supply) | 3 |
| ACCESSORIES | Number of Acetylene Cylinders supplied (inclusive in the scope of supply) | 2 |
| ACCESSORIES | Capacity of each Acetylene cylinder (Litres) | 47 |
| ACCESSORIES | Number of Nitrous oxide Cylinders supplied (inclusive in the scope of supply) | 2 |
| ACCESSORIES | Capacity of each Nitrous oxide cylinder (Litres) | 47 |
| ACCESSORIES | Gas cylinders having PESO certificate | Yes |
| ACCESSORIES | Other accessories (inclusive in the scope of supply) | Gas flow control box, Oil Moisture Filters, SS Exhaust fume hood with blower, Schematic diagram and instruction manual, Hydride generator, Auto sampler |
| ACCESSORIES | Suitable software for connecting PC & Printer (inclusive in the scope of supply) | Yes |
| WARRANTY / AVAILABILITY OF SPARES | warranty (Year) | 2.0 |
| WARRANTY / AVAILABILITY OF SPARES | Spares and Consumables inclusive in the scope of supply | Yes |
| CERTIFICATION | Availability of UL/CE Certification as per EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements | Yes |
| CERTIFICATION | Conformance to EMC/EMI as per EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use | No |
| CERTIFICATION | Availability of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to prove conformity to the specification | No |