Invitation to Bid - Supplying all materials and Laying of distribution network including installation of 10,000 Ltr. HDPE tank as per the directions of Engineer in Charge including Earthwork in 30m wide and 1,1m deep trenches, Including crossing of ditches Road cutting and restoration and backfilling the trenches after layig of line, providing and laying HDPE pipe of 90 mm dia and 63 mm dia of (PE-PN10 rating) as per IS 4984/1995 and 50 mm and 40mm dia pipe (PE100-PN8 rating) as required including supplying all jointing materials etc. including all taxes, duties etc.-and incidental charges providing necessary thrust block where as required, construction of brick masonary chamber (60cm x 60cm x 75cm) for valves with cost of certification mark and fixing in trenches including the cost of fullway valves, earth work in back filling the trenches after laying of different types and sizes of pipe, fittings and valves with earth removed during excavation within initial lead and lift etc. including providing night guard, barrier and red light to safe guard against accident, testing of laid pipes etc. all complete job as per specification and direction of E/I. in BIHAR
Bid Publish Date
09-Feb-2021, 2:58 pm
Bid End Date
16-Feb-2021, 5:00 pm
EMD
₹3,50,000
Value
₹1,74,70,300
Location
Progress
Tender Type
Open
Tender Fee
₹10,000
Tender Fee Exemption
No
EMD Exemption
No
Category
CIVIL
Categories
51
The issuing authority invites bids for Design, Construction, Supply, Testing, commissioning of Water Supply Schemes with Electric Driven Pumps and Fluoride Removal Treatment Plant having Technology (Adsorption/ Nano Technology) of CSIR or certified by CSIR or any other Technology endorsed/ approved by GoI in the Fluoride affected Habitations/ Wards of Districts of Bihar on turn-key basis with 3 months Trial Run after Commissioning and Comprehensive Operation and Maintenance of 60 months after successful completion of Trial Run Period under Mukhmantri Nishchay (Quality Affected) Yojna on Turn Key basis for Under P. H. Division, Munger Ward NO- 3, 4, 11, 13 of Panchayat- Banhara of under Block-Tetia Bambor, Dist-Munger. (Total no of Shceme-4) in BIHAR. Submission Deadline: 16-02-2021 17: 00: 00. Submit your proposal before the deadline.
Additional Tender Data
Commercial Details
Processing Fee
₹3,540
Tender Currency
INR
Bid Currency
INR
Ranking Sequence
L1 Ranking
Estimated Value Visibility
Y
Bid To RA
No
Authority & Contact
Organization Hierarchy
Government of Bihar->Public Health Engineering Department->Bhagalpur Zone->Munger Circle->Munger Division
Approving Authority
Sri Avi Ranjan (Executive Engineer)
Tender Creator
Mr Ajit Kumar (EXECUTIVE ENGINEER)
Pre-Bid & Qualification
Pre-Bid Meeting Start
13-02-2021 15:00:00
Pre-Bid Meeting End
13-02-2021 17:00:00
Pre-Bid Discussion Type
OFFLINE
Pre-Bid Venue
P.H.Division, Munger Office
Payment Breakdown
| Type | Amount | Currency | Mode | Exemption |
|---|---|---|---|---|
| EMD | ₹3,50,000 | INR | Internet Payment Gateway(IPG),Challan|Bank Guarantee | No |
| Tender Fee | ₹10,000 | INR | Internet Payment Gateway(IPG),Challan| | No |
| Tender Processing Fee | ₹3,540 | INR | Internet Payment Gateway(IPG),Challan| | No |
Document Requirements
Registration Certificate
PAN Card Copy
Work Experience (As Per NIT)
Existing commitments and ongoing works
Work for which Bid already submitted
Availability of key items of Contractor's Equipment (As per NIT)
Key Personnel (As per NIT)
Evidence of accesses to Financial Resources (As per NIT)
Proposed methodology and programme of construction.
Litigation History Information regarding any litigation, current or during the last five years,
Affidavit
Undertaking Able to invest a minimum of cost upto 25% of contract value of work.
GST Copy
Balance Sheet with ITR (Last 5 Years)
Any Other Document if Required (As per NIT)
Charactor Certificate
General Particulars
Legal Status of Bidder.
Place of Registration.
Principal place of Business
Power of attorney of signatory Bid
Bid Validity
Annual Financial Turn Over (In all classes of Civil Engineering Construction work) in any one year during the last five years to be not less than 5% of the estimated cost of works the turnover will be indexed at the rate of 8% for a year. or New Bidder registered/having applied for registration with government Department and have no prior turn over shall be eligible to partycipate in the temder provided and additional Bank gurantee to the tune of 2 % of Estimated Cost of the work of validity till the period of completion duly pledged in favour of Executvie Engineer, P.H Division, Munger, which is submitted with the technical bid of the tender F.Y-2015-16
Annual Financial Turn Over (In all classes of Civil Engineering Construction work) in any one year during the last five years to be not less than 5% of the estimated cost of works the turnover will be indexed at the rate of 8% for a year. or New Bidder registered/having applied for registration with government Department and have no prior turn over shall be eligible to partycipate in the temder provided and additional Bank gurantee to the tune of 2 % of Estimated Cost of the work of validity till the period of completion duly pledged in favour of Executvie Engineer, P.H Division, Munger, which is submitted with the technical bid of the tender F.Y-2016-17
Annual Financial Turn Over (In all classes of Civil Engineering Construction work) in any one year during the last five years to be not less than 5% of the estimated cost of works the turnover will be indexed at the rate of 8% for a year. or New Bidder registered/having applied for registration with government Department and have no prior turn over shall be eligible to partycipate in the temder provided and additional Bank gurantee to the tune of 2 % of Estimated Cost of the work of validity till the period of completion duly pledged in favour of Executvie Engineer, P.H Division, Munger, which is submitted with the technical bid of the tender F.Y-2017-18
Annual Financial Turn Over (In all classes of Civil Engineering Construction work) in any one year during the last five years to be not less than 5% of the estimated cost of works the turnover will be indexed at the rate of 8% for a year. or New Bidder registered/having applied for registration with government Department and have no prior turn over shall be eligible to partycipate in the temder provided and additional Bank gurantee to the tune of 2 % of Estimated Cost of the work of validity till the period of completion duly pledged in favour of Executvie Engineer, P.H Division, Munger, which is submitted with the technical bid of the tender F.Y-2018-19
Annual Financial Turn Over (In all classes of Civil Engineering Construction work) in any one year during the last five years to be not less than 5% of the estimated cost of works the turnover will be indexed at the rate of 8% for a year. or New Bidder registered/having applied for registration with government Department and have no prior turn over shall be eligible to partycipate in the temder provided and additional Bank gurantee to the tune of 2 % of Estimated Cost of the work of validity till the period of completion duly pledged in favour of Executvie Engineer, P.H Division, Munger, which is submitted with the technical bid of the tender F.Y-2019-20
Tender Terms
Section 1
04 MNF PHED MUNG 2020-21.pdfDetailsAccepted all terms & Condition as per NIT
Section 1
04 MNF PHED MUNG 2020-21.pdfDetailsAccepted all terms & Condition as per NIT
Accepted all terms & Condition as per NIT
Section 2
04 MNF PHED MUNG 2020-21.pdfDetailsTime of Completion as per NIT
Section 2
04 MNF PHED MUNG 2020-21.pdfDetailsTime of Completion as per NIT
Time of Completion as per NIT
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
04 MNF PHED MUNG 2020-21.pdf
GENERAL_DOCUMENT
Abstract.xls
GENERAL_DOCUMENT
BIDDocument04MNF20211.docx
GENERAL_DOCUMENT
rfqCreation (1).xlsx
GENERAL_DOCUMENT
CorrigemdumMNF04.pdf
CORRIGENDUM
Bill of Quantities (BOQ)
23 Items Sign in to view GEM price trends Sign in for GEM prices
Supplying all materials and Laying of distribution network including installation of 10,000 Ltr. HDPE tank as per the directions of Engineer in Charge including Earthwork in 30m wide and 1,1m deep trenches, Including crossing of ditches Road cutting and restoration and backfilling the trenches after layig of line, providing and laying HDPE pipe of 90 mm dia and 63 mm dia of (PE-PN10 rating) as per IS 4984/1995 and 50 mm and 40mm dia pipe (PE100-PN8 rating) as required including supplying all jointing materials etc. including all taxes, duties etc.-and incidental charges providing necessary thrust block where as required, construction of brick masonary chamber (60cm x 60cm x 75cm) for valves with cost of certification mark and fixing in trenches including the cost of fullway valves, earth work in back filling the trenches after laying of different types and sizes of pipe, fittings and valves with earth removed during excavation within initial lead and lift etc. including providing night guard, barrier and red light to safe guard against accident, testing of laid pipes etc. all complete job as per specification and direction of E/I.
Supplying all materials and Laying of distribution network including installation of 10,000 Ltr. HDPE tank as per the directions of Engineer in Charge including Earthwork in 30m wide and 1,1m deep trenches, Including crossing of ditches Road cutting and restoration and backfilling the trenches after layig of line, providing and laying HDPE pipe of 90 mm dia and 63 mm dia of (PE-PN10 rating) as per IS 4984/1995 and 50 mm and 40mm dia pipe (PE100-PN8 rating) as required including supplying all jointing materials etc. including all taxes, duties etc.-and incidental charges providing necessary thrust block where as required, construction of brick masonary chamber (60cm x 60cm x 75cm) for valves with cost of certification mark and fixing in trenches including the cost of fullway valves, earth work in back filling the trenches after laying of different types and sizes of pipe, fittings and valves with earth removed during excavation within initial lead and lift etc. including providing night guard, barrier and red light to safe guard against accident, testing of laid pipes etc. all complete job as per specification and direction of E/I.
75mm PE 100-PN10
75mm PE 100-PN10
63 mm PE 100-PN10
63 mm PE 100-PN10
50mm PE 100-PN8
50mm PE 100-PN8
40mm PE 100-PN8
40mm PE 100-PN8
Capacity 10,000 Ltr. HDPE Tank
Capacity 10,000 Ltr. HDPE Tank
Providing house connection for each house hold including supplying all materials, labours, tools and making ferrule connection with 20 mm dia MDPE (PE 80 grade PN 12.5) and 15mm G.I Pipes with all fittings etc all complete.
Providing house connection for each house hold including supplying all materials, labours, tools and making ferrule connection with 20 mm dia MDPE (PE 80 grade PN 12.5) and 15mm G.I Pipes with all fittings etc all complete.
Supplying all designs drawing construction and commissioning of fully tested and successfully well operated Standard type Fluoride Treatment Unit (activated allumina based/Nano technology based/any approved technology (CSIR) for removal of excessive Fluoride) suitable for designed flow of capacity given below pipeline, valve and specials all complete job as per requirement and demand of the E/I. The Mild steel pressure tank and other articles should have not less than as per the specification so as to sustain the design pressure with due factor of safety. It should be duly painted with two coats of anticorrosive paints over a coat of red oxide primer. The materials article should be as per respective Indian standard and should be manufactured from ISO : 9001 company including delivery charges and all taxes & duties complete including all civil works all complete as per standard specification and direction of E/I including provision of safe waste water disposal etc. all complete work.. 6 KLPH /8 KLPH
Supplying all designs drawing construction and commissioning of fully tested and successfully well operated Standard type Fluoride Treatment Unit (activated allumina based/Nano technology based/any approved technology (CSIR) for removal of excessive Fluoride) suitable for designed flow of capacity given below pipeline, valve and specials all complete job as per requirement and demand of the E/I. The Mild steel pressure tank and other articles should have not less than as per the specification so as to sustain the design pressure with due factor of safety. It should be duly painted with two coats of anticorrosive paints over a coat of red oxide primer. The materials article should be as per respective Indian standard and should be manufactured from ISO : 9001 company including delivery charges and all taxes & duties complete including all civil works all complete as per standard specification and direction of E/I including provision of safe waste water disposal etc. all complete work.. 6 KLPH /8 KLPH
-
Comprehensive Operation & Maintenance including repairs of Civil & Mechanical Structures, Supply of Spare parts, all Chemical, Energy cost, Deployment of manpower, checking of status of supply in the command area, repairing of leakages, backwash, maintaining log book , data compilation, submission of daily / weekly / monthly and yearly report of both RAW and Treated water quality , getting endorsed / tested by state laboratories once in every month, replacing the filter media/damaged parts of any machinery / the machinery as a whole, annual / bi-annual maintenance of all built-up / installed structures / units under the scheme , including round-the clock watch & ward to ensure potable water to the beneficiaries of the scheme for 60 calendar months from the date of completion of trial run
Comprehensive Operation & Maintenance including repairs of Civil & Mechanical Structures, Supply of Spare parts, all Chemical, Energy cost, Deployment of manpower, checking of status of supply in the command area, repairing of leakages, backwash, maintaining log book , data compilation, submission of daily / weekly / monthly and yearly report of both RAW and Treated water quality , getting endorsed / tested by state laboratories once in every month, replacing the filter media/damaged parts of any machinery / the machinery as a whole, annual / bi-annual maintenance of all built-up / installed structures / units under the scheme , including round-the clock watch & ward to ensure potable water to the beneficiaries of the scheme for 60 calendar months from the date of completion of trial run
Provision of safe waste water disposal etc. all complete work.
Provision of safe waste water disposal etc. all complete work.
Providing and erecting 8M high staging as per details attached with ladder of ISA65 x 65 x 6 and 16mm dia MS bar as trade @ 400mm c/c and GI enclosure to house electric switch panel & treatment unit (where required) of suitably designed MS section of angle, channel, etc. as per drawing attached.
Providing and erecting 8M high staging as per details attached with ladder of ISA65 x 65 x 6 and 16mm dia MS bar as trade @ 400mm c/c and GI enclosure to house electric switch panel & treatment unit (where required) of suitably designed MS section of angle, channel, etc. as per drawing attached.
Installation of Electronically Regulated Doser type chlorinator using Sodium Hypo Chlorite (Hypo NaOCl)
Installation of Electronically Regulated Doser type chlorinator using Sodium Hypo Chlorite (Hypo NaOCl)
1st Year
1st Year
2nd Year
2nd Year
SECTION ? A : EXECUTION PART
SECTION ? A : EXECUTION PART
Cost for construction of 150 mm x 100 mm dia 125 m deep high yielding tube well having discharge 5 lps etc all complete as per direction of E/I. (In case of hilly areas depth may vary as per site condition, hydrology of the area and desired yield of the T-well) using U.P.V.C. Pipe & Strainer etc. all complete and as per direction of E/I. (2 Nos. ward Developing of existing tubewell as per direction of E/I.)
Cost for construction of 150 mm x 100 mm dia 125 m deep high yielding tube well having discharge 5 lps etc all complete as per direction of E/I. (In case of hilly areas depth may vary as per site condition, hydrology of the area and desired yield of the T-well) using U.P.V.C. Pipe & Strainer etc. all complete and as per direction of E/I. (2 Nos. ward Developing of existing tubewell as per direction of E/I.)
Constructing masonry Chamber 100x100x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Tube Well, and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , necessary excavation, foundation concrete 1:2:4(1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick with 5% cico fnished with a floating coat of neat cement, out side plastering with cement mortar 1:4 (1 cement : 4coarse sand) 12 mm thick complete as per standard specifications & direction of E/I.
Constructing masonry Chamber 100x100x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Tube Well, and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , necessary excavation, foundation concrete 1:2:4(1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick with 5% cico fnished with a floating coat of neat cement, out side plastering with cement mortar 1:4 (1 cement : 4coarse sand) 12 mm thick complete as per standard specifications & direction of E/I.
Installation of 3 H.P. Submersible pump set, Starter Control Panel & 6.0 KVA automatic voltage stabilizer (Submersible, Pump set/Starter Control Pannel & 6 KVA Automatic Voltage Stabilizer will be supplied free of cost by the department)
Installation of 3 H.P. Submersible pump set, Starter Control Panel & 6.0 KVA automatic voltage stabilizer (Submersible, Pump set/Starter Control Pannel & 6 KVA Automatic Voltage Stabilizer will be supplied free of cost by the department)
90 mm PE 100-PN10
90 mm PE 100-PN10
3rd Year
3rd Year
4th Year
4th Year
5th Year
5th Year
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Mandatory | Price Trends |
|---|---|---|---|---|---|---|---|---|
| B | Supplying all materials and Laying of distribution network including installation of 10,000 Ltr. HDPE tank as per the directions of Engineer in Charge including Earthwork in 30m wide and 1,1m deep trenches, Including crossing of ditches Road cutting and restoration and backfilling the trenches after layig of line, providing and laying HDPE pipe of 90 mm dia and 63 mm dia of (PE-PN10 rating) as per IS 4984/1995 and 50 mm and 40mm dia pipe (PE100-PN8 rating) as required including supplying all jointing materials etc. including all taxes, duties etc.-and incidental charges providing necessary thrust block where as required, construction of brick masonary chamber (60cm x 60cm x 75cm) for valves with cost of certification mark and fixing in trenches including the cost of fullway valves, earth work in back filling the trenches after laying of different types and sizes of pipe, fittings and valves with earth removed during excavation within initial lead and lift etc. including providing night guard, barrier and red light to safe guard against accident, testing of laid pipes etc. all complete job as per specification and direction of E/I. | Supplying all materials and Laying of distribution network including installation of 10,000 Ltr. HDPE tank as per the directions of Engineer in Charge including Earthwork in 30m wide and 1,1m deep trenches, Including crossing of ditches Road cutting and restoration and backfilling the trenches after layig of line, providing and laying HDPE pipe of 90 mm dia and 63 mm dia of (PE-PN10 rating) as per IS 4984/1995 and 50 mm and 40mm dia pipe (PE100-PN8 rating) as required including supplying all jointing materials etc. including all taxes, duties etc.-and incidental charges providing necessary thrust block where as required, construction of brick masonary chamber (60cm x 60cm x 75cm) for valves with cost of certification mark and fixing in trenches including the cost of fullway valves, earth work in back filling the trenches after laying of different types and sizes of pipe, fittings and valves with earth removed during excavation within initial lead and lift etc. including providing night guard, barrier and red light to safe guard against accident, testing of laid pipes etc. all complete job as per specification and direction of E/I. | - | - | - | - | Yes | |
| 5 | 75mm PE 100-PN10 | 75mm PE 100-PN10 | 1,107 | meter | - | - | Yes | |
| 6 | 63 mm PE 100-PN10 | 63 mm PE 100-PN10 | 1,353 | meter | - | - | Yes | |
| 7 | 50mm PE 100-PN8 | 50mm PE 100-PN8 | 1,476 | each | - | - | Yes | |
| 8 | 40mm PE 100-PN8 | 40mm PE 100-PN8 | 1,599 | each | - | - | Yes | |
| 9 | Capacity 10,000 Ltr. HDPE Tank | Capacity 10,000 Ltr. HDPE Tank | 4 | each | - | - | Yes | |
| 10 | Providing house connection for each house hold including supplying all materials, labours, tools and making ferrule connection with 20 mm dia MDPE (PE 80 grade PN 12.5) and 15mm G.I Pipes with all fittings etc all complete. | Providing house connection for each house hold including supplying all materials, labours, tools and making ferrule connection with 20 mm dia MDPE (PE 80 grade PN 12.5) and 15mm G.I Pipes with all fittings etc all complete. | 417 | each | - | - | Yes | |
| 11 | Supplying all designs drawing construction and commissioning of fully tested and successfully well operated Standard type Fluoride Treatment Unit (activated allumina based/Nano technology based/any approved technology (CSIR) for removal of excessive Fluoride) suitable for designed flow of capacity given below pipeline, valve and specials all complete job as per requirement and demand of the E/I. The Mild steel pressure tank and other articles should have not less than as per the specification so as to sustain the design pressure with due factor of safety. It should be duly painted with two coats of anticorrosive paints over a coat of red oxide primer. The materials article should be as per respective Indian standard and should be manufactured from ISO : 9001 company including delivery charges and all taxes & duties complete including all civil works all complete as per standard specification and direction of E/I including provision of safe waste water disposal etc. all complete work.. 6 KLPH /8 KLPH | Supplying all designs drawing construction and commissioning of fully tested and successfully well operated Standard type Fluoride Treatment Unit (activated allumina based/Nano technology based/any approved technology (CSIR) for removal of excessive Fluoride) suitable for designed flow of capacity given below pipeline, valve and specials all complete job as per requirement and demand of the E/I. The Mild steel pressure tank and other articles should have not less than as per the specification so as to sustain the design pressure with due factor of safety. It should be duly painted with two coats of anticorrosive paints over a coat of red oxide primer. The materials article should be as per respective Indian standard and should be manufactured from ISO : 9001 company including delivery charges and all taxes & duties complete including all civil works all complete as per standard specification and direction of E/I including provision of safe waste water disposal etc. all complete work.. 6 KLPH /8 KLPH | 3 | each | - | - | Yes | |
| 12 | - | - | 1 | each | - | - | Yes | — |
| C | Comprehensive Operation & Maintenance including repairs of Civil & Mechanical Structures, Supply of Spare parts, all Chemical, Energy cost, Deployment of manpower, checking of status of supply in the command area, repairing of leakages, backwash, maintaining log book , data compilation, submission of daily / weekly / monthly and yearly report of both RAW and Treated water quality , getting endorsed / tested by state laboratories once in every month, replacing the filter media/damaged parts of any machinery / the machinery as a whole, annual / bi-annual maintenance of all built-up / installed structures / units under the scheme , including round-the clock watch & ward to ensure potable water to the beneficiaries of the scheme for 60 calendar months from the date of completion of trial run | Comprehensive Operation & Maintenance including repairs of Civil & Mechanical Structures, Supply of Spare parts, all Chemical, Energy cost, Deployment of manpower, checking of status of supply in the command area, repairing of leakages, backwash, maintaining log book , data compilation, submission of daily / weekly / monthly and yearly report of both RAW and Treated water quality , getting endorsed / tested by state laboratories once in every month, replacing the filter media/damaged parts of any machinery / the machinery as a whole, annual / bi-annual maintenance of all built-up / installed structures / units under the scheme , including round-the clock watch & ward to ensure potable water to the beneficiaries of the scheme for 60 calendar months from the date of completion of trial run | - | - | - | - | Yes | |
| 13 | Provision of safe waste water disposal etc. all complete work. | Provision of safe waste water disposal etc. all complete work. | 4 | - | - | - | Yes | |
| 14 | Providing and erecting 8M high staging as per details attached with ladder of ISA65 x 65 x 6 and 16mm dia MS bar as trade @ 400mm c/c and GI enclosure to house electric switch panel & treatment unit (where required) of suitably designed MS section of angle, channel, etc. as per drawing attached. | Providing and erecting 8M high staging as per details attached with ladder of ISA65 x 65 x 6 and 16mm dia MS bar as trade @ 400mm c/c and GI enclosure to house electric switch panel & treatment unit (where required) of suitably designed MS section of angle, channel, etc. as per drawing attached. | 4 | each | - | - | Yes | |
| 15 | Installation of Electronically Regulated Doser type chlorinator using Sodium Hypo Chlorite (Hypo NaOCl) | Installation of Electronically Regulated Doser type chlorinator using Sodium Hypo Chlorite (Hypo NaOCl) | 4 | each | - | - | Yes | |
| 16 | 1st Year | 1st Year | 1 | job | - | - | Yes | |
| 17 | 2nd Year | 2nd Year | 1 | job | - | - | Yes | |
| A | SECTION ? A : EXECUTION PART | SECTION ? A : EXECUTION PART | - | - | - | - | Yes | |
| 1 | Cost for construction of 150 mm x 100 mm dia 125 m deep high yielding tube well having discharge 5 lps etc all complete as per direction of E/I. (In case of hilly areas depth may vary as per site condition, hydrology of the area and desired yield of the T-well) using U.P.V.C. Pipe & Strainer etc. all complete and as per direction of E/I. (2 Nos. ward Developing of existing tubewell as per direction of E/I.) | Cost for construction of 150 mm x 100 mm dia 125 m deep high yielding tube well having discharge 5 lps etc all complete as per direction of E/I. (In case of hilly areas depth may vary as per site condition, hydrology of the area and desired yield of the T-well) using U.P.V.C. Pipe & Strainer etc. all complete and as per direction of E/I. (2 Nos. ward Developing of existing tubewell as per direction of E/I.) | 4 | each | - | - | Yes | |
| 2 | Constructing masonry Chamber 100x100x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Tube Well, and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , necessary excavation, foundation concrete 1:2:4(1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick with 5% cico fnished with a floating coat of neat cement, out side plastering with cement mortar 1:4 (1 cement : 4coarse sand) 12 mm thick complete as per standard specifications & direction of E/I. | Constructing masonry Chamber 100x100x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Tube Well, and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , necessary excavation, foundation concrete 1:2:4(1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick with 5% cico fnished with a floating coat of neat cement, out side plastering with cement mortar 1:4 (1 cement : 4coarse sand) 12 mm thick complete as per standard specifications & direction of E/I. | 4 | each | - | - | Yes | |
| 3 | Installation of 3 H.P. Submersible pump set, Starter Control Panel & 6.0 KVA automatic voltage stabilizer (Submersible, Pump set/Starter Control Pannel & 6 KVA Automatic Voltage Stabilizer will be supplied free of cost by the department) | Installation of 3 H.P. Submersible pump set, Starter Control Panel & 6.0 KVA automatic voltage stabilizer (Submersible, Pump set/Starter Control Pannel & 6 KVA Automatic Voltage Stabilizer will be supplied free of cost by the department) | 4 | each | - | - | Yes | |
| 4 | 90 mm PE 100-PN10 | 90 mm PE 100-PN10 | 615 | meter | - | - | Yes | |
| 18 | 3rd Year | 3rd Year | 1 | job | - | - | Yes | |
| 19 | 4th Year | 4th Year | 1 | job | - | - | Yes | |
| 20 | 5th Year | 5th Year | 1 | job | - | - | Yes |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
04 MNF PHED MUNG 2020-21.pdf
GENERAL_DOCUMENT
Abstract.xls
GENERAL_DOCUMENT
BIDDocument04MNF20211.docx
GENERAL_DOCUMENT
rfqCreation (1).xlsx
GENERAL_DOCUMENT
CorrigemdumMNF04.pdf
CORRIGENDUM