Tender Notice for Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type run in SURAT, GUJARAT
Progress
Quantity
3152
Category
Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings
Bid Type
Two Packet Bid
Categories
51
Airports Authority Of India announces a tender for Supply of 200W, 6. 6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings, Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting, Supply of 105W, 6. 6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting, Supply of 200Watt, 20A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 65Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, Supply of 300Watt, 6. 6A, 6. 6A, 5 KV, 50 Hz Isolating Transformers encapsulated in polyester resin, 360 Clear Outer Lens for elevated type runway edge light fittings, 360 Clear Inner Lens for elevated type runway edge light fittings, Supply of Green Spreader Lens for AMA fitting, Supply of 180 deg. Clear Lens Right AMA fitting, Supply of 180 deg. Clear Lens Left AMA fitting, Supply of 180 deg. Yellow inner lens, Right for AMA fitting, Supply of 180 deg. Red inner lens, left for AMA fitting, Supply of 180 deg. Yellow inner lens, Left for AMA fitting, Gasket suitable for base plate for Elevated type, Supply of outer side O Ring suitable for existing OCEM make, Supply of outer side O Ring suitable for existing OCEM make Middle, Supply of inner side O Ring for existing OCEM make runway edge Fitting, Supply of Aluminium Reflector suitable for existing AMA make, Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make, Supply of Clear prism suitable for existing OCEM make inset type Approch light, Supply of Clear prism suitable for existing OCEM make inset type Threshhold light, Supply of Lower Breakable Coupling, Supply of Upper Leg Pipe for PAPI for AMA Make, Supply of Lower Leg Pipe for PAPI for AMA Make, Supply of Locking Nut Left Hand Threded for AMA Make, Supply of Locking Nut Right Hand Threded for AMA Make, Supply of Threaded Adjustment Sleeve for AMA Make, Air Filter for PAPI AMA Make, 2mtr, 2x4 sqmm secondary Lead, 0. 3mtr, 2x2. 5 sqmm secondary Lead for LED Taxiway Fitting, 0. 3mtr, 2x4 sqmm secondary Lead, Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV, Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV, Supply of 1 X 6 sq. mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable in SURAT, GUJARAT. Quantity: 3152. Submission Deadline: 28-07-2026 18: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings , Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting , Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting , Supply of 200Watt, 20A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin , Supply of 65Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin , Supply of 300Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin , 360 Clear Outer Lens for elevated type runway edge light fittings , 360 Clear Inner Lens for elevated type runway edge light fittings , Supply of Green Spreader Lens for AMA fitting , Supply of 180 deg. Clear Lens Right AMA fitting , Supply of 180 deg. Clear Lens Left AMA fitting , Supply of 180 deg. Yellow inner lens,Right for AMA fitting , Supply of 180 deg. Red inner lens,left for AMA fitting , Supply of 180 deg. Yellow inner lens, Left for AMA fitting , Gasket suitable for base plate for Elevated type , Supply of outer side O Ring suitable for existing OCEM make , Supply of outer side O Ring suitable for existing OCEM make Middle , Supply of inner side O Ring for existing OCEM make runway edge Fitting , Supply of Aluminium Reflector suitable for existing AMA make , Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make , Supply of Clear prism suitable for existing OCEM make inset type Approch light , Supply of Clear prism suitable for existing OCEM make inset type Threshhold light , Supply of Lower Breakable Coupling , Supply of Upper Leg Pipe for PAPI for AMA Make , Supply of Lower Leg Pipe for PAPI for AMA Make , Supply of Locking Nut Left Hand Threded for AMA Make , Supply of Locking Nut Right Hand Threded for AMA Make , Supply of Threaded Adjustment Sleeve for AMA Make , Air Filter for PAPI AMA Make , 2mtr, 2x4 sqmm secondary Lead , 0.3mtr, 2x2.5 sqmm secondary Lead for LED Taxiway Fitting , 0.3mtr, 2x4 sqmm secondary Lead , Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV , Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV , Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable
Advisory Bank
State Bank of India
Payment Timelines
Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
365
Delivery Locations
1
Delivery Cities
Surat
Delivery Pincodes
395007
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Madan Mohan Agrawal | 395007,Office of Sr. Manager (Engg. Elect) E&M complex , Surat Airport Surat. | Surat | Gujarat | 395007 | 900 | 365 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 6
GeM-Bidding-9571885.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
36 Items Sign in to view GEM price trends Sign in for GEM prices
Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings
Supply of 200W/6.6A HIRL bi - pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. (Make-OSRAM -64386 or equivalent).
Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting
Supply of Bi Pin Lamp Holder for AMA make elevated type Runway/PAPI/Approach/Taxi Light Fitting as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting
Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required. (Make OSRAM Cat no.643339C or equivalent).
Supply of 200Watt, 20A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin
Supply of 200Watt, 20A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 65Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin
Supply of 65 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 300Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin
Supply of 300 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required.
360 Clear Outer Lens for elevated type runway edge light fittings
360 Clear Outer Lens for elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required.
360 Clear Inner Lens for elevated type runway edge light fittings
360 Clear Inner Lens for elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Green Spreader Lens for AMA fitting
Supply of Green Spreader Lens (suitable for AMA make elevated type Threshold fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Clear Lens Right AMA fitting
Supply of 180 deg. Clear Lens (Right) (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Clear Lens Left AMA fitting
Supply of 180 deg. Clear Lens(Left) (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Yellow inner lens,Right for AMA fitting
Supply of 180 deg. Red inner lens Right (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Red inner lens,left for AMA fitting
Supply of 180 deg. Red inner lens,Left (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Yellow inner lens,Right for AMA fitting
Supply of 180 deg. Yellow inner lens,Right ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of 180 deg. Yellow inner lens, Left for AMA fitting
Supply of 180 deg. Yellow inner lens,Left ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.
Gasket suitable for base plate for Elevated type
Gasket suitable for base plate for Elevated type runway edge/Approach/End/Threshold fitting complele as required.
Supply of outer side O Ring suitable for existing OCEM make
Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),L-868 base as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of outer side O Ring suitable for existing OCEM make Middle
Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),( between fixture and base base ) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of inner side O Ring for existing OCEM make runway edge Fitting
Supply of inner side O Ring for existing OCEM make runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) ,(O-Ring around the dome ) as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Aluminium Reflector suitable for existing AMA make
Supply of Aluminium Reflector suitable for existing AMA make elevated type Threshold/Approach /End light fitting as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make
Supply of Clear /yellow /Green/Red filter suitable for existing OCEM make inset type Runway edge/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) fittings as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Clear prism suitable for existing OCEM make inset type Approch light
Supply of Clear prism suitable for existing OCEM make inset type Approch light (Model No- SLAP-C-ST-300-O) fittings as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Clear prism suitable for existing OCEM make inset type Threshhold light
Supply of Clear prism suitable for existing OCEM make inset type Threshhold light (Threshold (Model No- SLTH-G-RI-200-O) fittings.as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Lower Breakable Coupling
Supply of Lower Breakable Coupling ( (Swival Bracket) including leg plate and point) Spares for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Upper Leg Pipe for PAPI for AMA Make
Supply of Upper Leg Pipe for PAPI(Left/Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Lower Leg Pipe for PAPI for AMA Make
Supply of Lower Leg Pipe for PAPI(Left/Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Locking Nut Left Hand Threded for AMA Make
Supply of Locking Nut (Left Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Locking Nut Right Hand Threded for AMA Make
Supply of Locking Nut (Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Supply of Threaded Adjustment Sleeve for AMA Make
Supply of Threaded Adjustment Sleeve for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required.
Air Filter for PAPI AMA Make
Air Filter for PAPI AMA Make
2mtr, 2x4 sqmm secondary Lead
2 mtr (2x4 sqmm Cable)2 pin Secondary Plug Assembly (Secondary Lead)
0.3mtr, 2x2.5 sqmm secondary Lead for LED Taxiway Fitting
0.3 mtr (2x 2.5 sqmm Cable) 2 pin Secondary Plug Assembly (Secondary Lead) with PG11 PVC connector Suitable for Eleveted Taxiway Edge LED type fitting
0.3mtr, 2x4 sqmm secondary Lead
0.3 mtr (2x4 sqmm cable) 2pin socket Assembly (Secondary Lead consist of one male and one female connector)
Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV
Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV Air Field Lighting (AFL) copper conductor cable as required.(A set shall consist of one male and one female connector).
Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV
Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV Air Field Lighting (AFL) copper conductor cable as required.(A set shall consist of one male and one female connector).
Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable
Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed (Inner sheath extruded) galvanised steel strip armoured anti termite and anti rodent treated under ground cable of 5 KV grade confirming to IS 1554 as amended upto date and as specified in particular specification.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Supply of 200W, 6.6A HIRL bi pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings | Supply of 200W/6.6A HIRL bi - pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. (Make-OSRAM -64386 or equivalent). | 900 | each | agm1.electrical.vasu | 365 | |
| 2 | Supply of Bi Pin Lamp Holder For AMA make elevated type Runway or Papi or Taxi Light Fitting | Supply of Bi Pin Lamp Holder for AMA make elevated type Runway/PAPI/Approach/Taxi Light Fitting as per ICAO/CAR compliance and AAI specification etc complete as required. | 250 | each | agm1.electrical.vasu | 365 | |
| 3 | Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting | Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required. (Make OSRAM Cat no.643339C or equivalent). | 470 | each | agm1.electrical.vasu | 365 | |
| 4 | Supply of 200Watt, 20A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 200Watt, 20A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 40 | each | agm1.electrical.vasu | 365 | |
| 5 | Supply of 65Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 65 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 6 | Supply of 300Watt, 6.6A, 6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin | Supply of 300 Watt, 6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 7 | 360 Clear Outer Lens for elevated type runway edge light fittings | 360 Clear Outer Lens for elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 | |
| 8 | 360 Clear Inner Lens for elevated type runway edge light fittings | 360 Clear Inner Lens for elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 100 | each | agm1.electrical.vasu | 365 | |
| 9 | Supply of Green Spreader Lens for AMA fitting | Supply of Green Spreader Lens (suitable for AMA make elevated type Threshold fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 30 | each | agm1.electrical.vasu | 365 | |
| 10 | Supply of 180 deg. Clear Lens Right AMA fitting | Supply of 180 deg. Clear Lens (Right) (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 11 | Supply of 180 deg. Clear Lens Left AMA fitting | Supply of 180 deg. Clear Lens(Left) (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 | |
| 12 | Supply of 180 deg. Yellow inner lens,Right for AMA fitting | Supply of 180 deg. Red inner lens Right (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 60 | each | agm1.electrical.vasu | 365 | |
| 13 | Supply of 180 deg. Red inner lens,left for AMA fitting | Supply of 180 deg. Red inner lens,Left (suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 60 | each | agm1.electrical.vasu | 365 | |
| 14 | Supply of 180 deg. Yellow inner lens,Right for AMA fitting | Supply of 180 deg. Yellow inner lens,Right ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 40 | each | agm1.electrical.vasu | 365 | |
| 15 | Supply of 180 deg. Yellow inner lens, Left for AMA fitting | Supply of 180 deg. Yellow inner lens,Left ( suitable for AMA make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required. | 90 | each | agm1.electrical.vasu | 365 | |
| 16 | Gasket suitable for base plate for Elevated type | Gasket suitable for base plate for Elevated type runway edge/Approach/End/Threshold fitting complele as required. | 200 | each | agm1.electrical.vasu | 365 | |
| 17 | Supply of outer side O Ring suitable for existing OCEM make | Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),L-868 base as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 18 | Supply of outer side O Ring suitable for existing OCEM make Middle | Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O),( between fixture and base base ) as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 19 | Supply of inner side O Ring for existing OCEM make runway edge Fitting | Supply of inner side O Ring for existing OCEM make runway edge Fitting/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) ,(O-Ring around the dome ) as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 20 | Supply of Aluminium Reflector suitable for existing AMA make | Supply of Aluminium Reflector suitable for existing AMA make elevated type Threshold/Approach /End light fitting as per ICAO/CAR compliance and AAI specification etc complete as required. | 10 | each | agm1.electrical.vasu | 365 | |
| 21 | Supply of Clear or yellow or Green or Red filter suitable for existing OCEM make | Supply of Clear /yellow /Green/Red filter suitable for existing OCEM make inset type Runway edge/Approch (Model No- SLAP-C-ST-300-O) /Threshold (Model No- SLTH-G-RI-200-O) fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 22 | Supply of Clear prism suitable for existing OCEM make inset type Approch light | Supply of Clear prism suitable for existing OCEM make inset type Approch light (Model No- SLAP-C-ST-300-O) fittings as per ICAO/CAR compliance and AAI specification etc complete as required. | 12 | each | agm1.electrical.vasu | 365 | |
| 23 | Supply of Clear prism suitable for existing OCEM make inset type Threshhold light | Supply of Clear prism suitable for existing OCEM make inset type Threshhold light (Threshold (Model No- SLTH-G-RI-200-O) fittings.as per ICAO/CAR compliance and AAI specification etc complete as required. | 12 | each | agm1.electrical.vasu | 365 | |
| 24 | Supply of Lower Breakable Coupling | Supply of Lower Breakable Coupling ( (Swival Bracket) including leg plate and point) Spares for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 25 | Supply of Upper Leg Pipe for PAPI for AMA Make | Supply of Upper Leg Pipe for PAPI(Left/Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 26 | Supply of Lower Leg Pipe for PAPI for AMA Make | Supply of Lower Leg Pipe for PAPI(Left/Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 27 | Supply of Locking Nut Left Hand Threded for AMA Make | Supply of Locking Nut (Left Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 28 | Supply of Locking Nut Right Hand Threded for AMA Make | Supply of Locking Nut (Right Hand Threded) for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 29 | Supply of Threaded Adjustment Sleeve for AMA Make | Supply of Threaded Adjustment Sleeve for AMA Make Mk-III PAPI Unit as per ICAO/CAR compliance and AAI specification etc complete as required. | 5 | each | agm1.electrical.vasu | 365 | |
| 30 | Air Filter for PAPI AMA Make | Air Filter for PAPI AMA Make | 8 | each | agm1.electrical.vasu | 365 | |
| 31 | 2mtr, 2x4 sqmm secondary Lead | 2 mtr (2x4 sqmm Cable)2 pin Secondary Plug Assembly (Secondary Lead) | 10 | each | agm1.electrical.vasu | 365 | |
| 32 | 0.3mtr, 2x2.5 sqmm secondary Lead for LED Taxiway Fitting | 0.3 mtr (2x 2.5 sqmm Cable) 2 pin Secondary Plug Assembly (Secondary Lead) with PG11 PVC connector Suitable for Eleveted Taxiway Edge LED type fitting | 50 | each | agm1.electrical.vasu | 365 | |
| 33 | 0.3mtr, 2x4 sqmm secondary Lead | 0.3 mtr (2x4 sqmm cable) 2pin socket Assembly (Secondary Lead consist of one male and one female connector) | 50 | each | agm1.electrical.vasu | 365 | |
| 34 | Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV | Supply of ESSNA connector kit set suitable for 6 sq. mm. 5kV Air Field Lighting (AFL) copper conductor cable as required.(A set shall consist of one male and one female connector). | 150 | each | agm1.electrical.vasu | 365 | |
| 35 | Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV | Supply of ESSNA connector kit set suitable for 16 sq. mm. 5kV Air Field Lighting (AFL) copper conductor cable as required.(A set shall consist of one male and one female connector). | 25 | each | agm1.electrical.vasu | 365 | |
| 36 | Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed 5kv runway cable | Supply of 1 X 6 sq.mm Copper conductor PVC insulated, PVC sheathed (Inner sheath extruded) galvanised steel strip armoured anti termite and anti rodent treated under ground cable of 5 KV grade confirming to IS 1554 as amended upto date and as specified in particular specification. | 500 | mtr | agm1.electrical.vasu | 365 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Bidder Turnover
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 6
GeM-Bidding-9571885.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS