Closed GEM

Invitation to Bid - Commercial UPVC Fittings,CPVC Ball Valve,Pipe Clamps (V2),Pipe Clamps (V2),Pipe Clamps (V2),Solvent in GURGAON, HARYANA

Bid Publish Date

21-Jul-2026, 2:53 pm

Bid End Date

17-Aug-2026, 3:00 pm

Value

₹12,259

Location

GURUGRAM , HARYANA

Corrigendum Updated WhatsApp Generate Docs

Progress

Issue21-Jul-2026, 2:53 pm

Corrigendum11-Aug-2026

Reverse Auction21-Aug-2026, 5:00 pm

AwardPending

Public procurement opportunity for N/a Commercial UPVC Fittings (Q3), CPVC Ball Valve (Q4), Pipe Clamps (V2) (Q4), Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings conforming to IS 18837 (Q3), CHLORINATED POLYVINYL CHLORIDE (CPVC) FITTINGS FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES Conforming to IS 17546 (Q3), Pipe Unions confirming to IS 1239 (Part 2) (Q4), Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2) (Q4), Chlorinated Polyvinyl Chloride (CPVC) Pipes For Portable Hot and Cold Water Distribution Supplies (V3) conforming to IS 15778 (Q3) in GURGAON, HARYANA. Quantity: 445 issued by. Submission Deadline: 17-08-2026 15: 00: 00. View full details and respond.

Authority & Contact

Organization

N/a

Department

Industrial Training and Vocational Education Department Haryana

Office Name

Govt I T I Nuh V Marora Po Nuh

Grievance Contact

[email protected]

Reverse Auction Schedule

Completed

Start

21-Aug-2026, 5:00 pm

End

22-Aug-2026, 5:00 pm

Duration: 24 hours

Reverse Auction Document

✅ RA concluded. Check financial results for final rankings.

Tender Data

Bid Details

Quantity

445

Preference & Exemptions

EMD Required

MII Purchase Preference

MSE Purchase Preference

MSE Exemption/Relaxation

Yes

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

Past Performance

30 %

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Commercial UPVC Fittings (Q3) , CPVC Ball Valve (Q4) , Pipe Clamps (V2) (Q4) , Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings conforming to IS 18837 (Q3) , CHLORINATED POLYVINYL CHLORIDE (CPVC) FITTINGS FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES Conforming to IS 17546 (Q3) , Pipe Unions confirming to IS 1239 (Part 2) (Q4) , Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2) (Q4) , Chlorinated Polyvinyl Chloride (CPVC) Pipes For Portable Hot and Cold Water Distribution Supplies (V3) conforming to IS 15778 (Q3)

Payment Timelines

Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Nuh

Delivery Pincodes

122107

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
Anil Kumar	122107,Government ITI Nuh Village Marora Delhi Alwar Road	Nuh	Haryana	122107	30	15	-

Authority Records

INDUSTRIAL TRAINING AND VOCATIONAL EDUCATION DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 23

GeM-Bidding-9638741.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Corrigendum Updates

2 Updates

Update

11-Aug-2026

Extended Deadline

17-Aug-2026, 9:30 am

Opening Date

17-Aug-2026, 10:00 am

Update

05-Aug-2026

Extended Deadline

10-Aug-2026, 9:30 am

Opening Date

10-Aug-2026, 10:00 am

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

OEM Authorization Certificate

OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 21 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Technical Parameters	Dimensions	1/2" - 14"
Technical Parameters	Classification	SCH 80
Technical Parameters	Type of Fittings	Socketed for Solvent Cementing
Technical Parameters	Elastomeric Ring	No
Technical Parameters	Type of Ends	Socket
Technical Parameters	Cell Classification	ASTM D 1784
Standards and Approvals	Approvals	WRAS
Standards and Approvals	Standards	EN ISO 1452
Test Reports	Availability of test report from central Govt/ NABL/ILAC accredited lab covering all parameters	Yes, No
Test Reports	Copies of Test Reports/Certificates and other certifications to be furnished to buyer on demand at time of supplies	Yes, NA

Item #2 Details

View Catalog

Category	Specification	Requirement
Size	Tube Size, inch	1
Size	Pipe Size, inch	1
Construction	Port	Standard
Construction	Seal Material	FKM
Construction	Valve Body Material	CPVC
Construction	Ball Material	CPVC
Construction	Body Style	Inline, Inline True Union, True Union, Single Union and True Union, Others
Construction	Handle Material	CPVC
Construction	Valve Structure	1-Piece
Construction	Connection Type	Female NPT, Slip
Pressure and Temperature	Temperature Range	0 degC to 99 degC
Pressure and Temperature	Maximum Pressure, psi	100-250
Generic	Packaging Type	Box
Generic	Standard	NSFOthers
Generic	Operation Mode	Manual
Generic	Features	Leak free, Corossion Resistant
Generic	Handle Type	Lever

Item #3 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Mild Steel
Generic	Shape of clamp	Single Pipe Clamps, Double Pipe Clamps, U Shape clamp/ Saddle clamp, Raised Pipe Clamp / Riser Clamp, Other (as per buyer requirement)
Generic	Load capacity	upto 50 KG, upto 100 KG, upto 150 KG, upto 200 KG, upto 250 KG, upto 300 KG, upto 350 KG, upto 400 KG, upto 450 KG, upto 500KG, up to 600 KG, upto 700 KG, upto 800 KG, upto 900 KG, upto 1000 KG, upto 2000 KG, upto 3000 KG, upto 4000 KG, upto 5000KG, upto 10000 KG and above, NA
Dimension	Clamp Suitable to hold nominal diameter of pipe	10mm, 15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 90mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 600mm
Dimension	Outside diameter of pipe (In mm)	20-22

Item #4 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Mild Steel
Generic	Shape of clamp	U Shape clamp/ Saddle clamp
Generic	Salient Feature	Two Bolt Clamp
Generic	Load capacity	upto 50 KG
Dimension	Clamp Suitable to hold nominal diameter of pipe	15mm
Dimension	Outside diameter of pipe (In mm)	15-19
Dimension	Minimum overall Length of clamp (in mm)	50
Dimension	Size of Clamp bolt	M5
Buyer Specific Requirements	Buyer Specific Requirement	NA
Buyer Specific Requirements	Additional Requirement	NA
Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per Governing Specification	OEM

Item #5 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Mild Steel
Generic	Shape of clamp	Single Pipe Clamps
Generic	Salient Feature	Two Bolt Clamp
Generic	Load capacity	upto 500KG
Dimension	Clamp Suitable to hold nominal diameter of pipe	100mm
Dimension	Outside diameter of pipe (In mm)	99-105
Dimension	Minimum overall Length of clamp (in mm)	75
Dimension	Size of Clamp bolt	M16
Buyer Specific Requirements	Buyer Specific Requirement	NA
Buyer Specific Requirements	Additional Requirement	NA
Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per Governing Specification	NABL Accredited Lab

Item #6 Details

View Catalog

Category	Specification	Requirement
Governing specification	Conformity to IS 18837	Yes
Generic Requirement	Type of CPVC solvent cement	Medium-bodied cement
Generic Requirement	Material Requirements	The material shall comply with the requirements given in clause 5 of IS 18837
Packing and Marking	Packing and Marking	As per clause 7 of IS 18837
Packing and Marking	Packing Material	Container
Packing and Marking	Packing Size	200 ml
Certification and Test Reports	Agree to provide all relevant documents, Test Report/Supporting document / reports etc to the buyer at the time of bidding or on demand at the time of Supply	Yes

Item #7 Details

View Catalog

Category	Specification	Requirement
Technical Parameters	Dimensions	1/2" - 14"
Technical Parameters	Classification	PN 10, SCH 80
Technical Parameters	Type of Fittings	Socketed for Solvent Cementing
Technical Parameters	Elastomeric Ring	Yes, No
Technical Parameters	Type of Ends	Socket
Technical Parameters	Cell Classification	ASTM D 1784
Standards and Approvals	Approvals	CE, BSI Kite Mark
Standards and Approvals	Standards	EN ISO 1452, ISO 727
Test Reports	Availability of test report from central Govt/ NABL/ILAC accredited lab covering all parameters	Yes
Test Reports	Copies of Test Reports/Certificates and other certifications to be furnished to buyer on demand at time of supplies	Yes, NA

Item #8 Details

View Catalog

Category	Specification	Requirement
Technical Parameters	Dimensions	1/2" - 14"
Technical Parameters	Classification	PN 10, SCH 80
Technical Parameters	Type of Fittings	Socketed for Solvent Cementing, Threaded ( BSP )
Technical Parameters	Elastomeric Ring	Yes, No
Technical Parameters	Type of Ends	Socket, Socket / Threaded
Technical Parameters	Cell Classification	ASTM D 1784
Standards and Approvals	Approvals	CE, BSI Kite Mark
Standards and Approvals	Standards	EN ISO 1452, ISO 727
Test Reports	Availability of test report from central Govt/ NABL/ILAC accredited lab covering all parameters	Yes
Test Reports	Copies of Test Reports/Certificates and other certifications to be furnished to buyer on demand at time of supplies	Yes

Item #9 Details

View Catalog

Category	Specification	Requirement
Classification	Type of Fittings	Reducer Bushing or Coupling CPVC Socket
Classification	SDR Classification	NA
Classification	Working Pressure (Mpa)	As per Table 1 of IS 17546
Dimensions (Socketed Fittings)	Nominal Size of Socket Fittings (NB) (in mm)	NA
Dimensions (Socketed Fittings)	Inside diameter of the socket at entry (ds1), Inside diameter of the socket at shoulder(bottom) (ds2), Socket Length (Min L), Inside Diameter (Min D), Wall Thickness (Min), Entrance (Min EW, EX, EZ)	NA
Dimensions Reducer/Coupler	Dimensions of Reducer Bushing or Coupling CPVC Socket Type Pipe Fitting	20mm×15mm
Dimensions Reducer/Coupler	Outside Diameter Ranges (X) for Reducer Bushing or Coupling CPVC Socket Type Pipe Fitting	As per Table 3 of IS 17546
Hydrostatic Performance	Requirements for Internal Hydrostatic Pressure Test	As per Table 4 of IS 17546
Marking	Marking	As per Clause 11 of IS 17546

Item #10 Details

View Catalog

Category	Specification	Requirement
Classification	Type of Fittings	Reducer Bushing or Coupling CPVC Socket
Classification	SDR Classification	NA
Classification	Working Pressure (Mpa)	As per Table 1 of IS 17546
Dimensions (Socketed Fittings)	Nominal Size of Socket Fittings (NB) (in mm)	NA
Dimensions (Socketed Fittings)	Inside diameter of the socket at entry (ds1), Inside diameter of the socket at shoulder(bottom) (ds2), Socket Length (Min L), Inside Diameter (Min D), Wall Thickness (Min), Entrance (Min EW, EX, EZ)	NA
Dimensions Reducer/Coupler	Dimensions of Reducer Bushing or Coupling CPVC Socket Type Pipe Fitting	25mm×20mm
Dimensions Reducer/Coupler	Outside Diameter Ranges (X) for Reducer Bushing or Coupling CPVC Socket Type Pipe Fitting	As per Table 3 of IS 17546
Hydrostatic Performance	Requirements for Internal Hydrostatic Pressure Test	As per Table 4 of IS 17546
Marking	Marking	As per Clause 11 of IS 17546

Item #11 Details

View Catalog

Category	Specification	Requirement
Size	Tube Size, inch	3/4
Size	Pipe Size, inch	3/4
Construction	Port	Standard
Construction	Seal Material	FKM
Construction	Valve Body Material	CPVC
Construction	Ball Material	UPVC
Construction	Body Style	Inline, Inline True Union, True Union, Single Union and True Union, Others
Construction	Handle Material	CPVC
Construction	Valve Structure	1-Piece
Construction	Connection Type	Female NPT
Pressure and Temperature	Temperature Range	0 degC to 99 degC
Pressure and Temperature	Maximum Pressure, psi	100-250
Generic	Packaging Type	Box
Generic	Standard	NSFOthers
Generic	Operation Mode	Manual
Generic	Features	Leak free, Corossion Resistant
Generic	Handle Type	Lever

Item #12 Details

View Catalog

Category	Specification	Requirement
Dimensions	Nominal Size of Outlet (in mm)	20 mm
Dimensions	Minimum Length (A) (in mm)	120 mm
Dimensions	Other Material and Tolerance	As per Table 25 & Clause 9.2 of IS 1239 (Part 2)
Dimensions	Bodies made from heavy tube conforming to IS 1239 (Part 1)	Yes
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2)), No
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #13 Details

View Catalog

Category	Specification	Requirement
Dimensions	Nominal Size of Outlet (in mm)	25 mm
Dimensions	Minimum Length (A) (in mm)	125 mm
Dimensions	Other Material and Tolerance	As per Table 25 & Clause 9.2 of IS 1239 (Part 2)
Dimensions	Bodies made from heavy tube conforming to IS 1239 (Part 1)	Yes
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #14 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Fitting	Tee Equal
Dimensions	Nominal Size of Outlet (in mm)	20 mm
Dimensions	Minimum Length, Centre to Face (in mm)	35 mm
Dimensions	Other Material and Tolerance	As per Clause 9.2 of IS 1239 (Part 2)
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #15 Details

View Catalog

Category	Specification	Requirement
Dimensions	Nominal Size of Outlet (in mm)	20 mm
Dimensions	Minimum Length (A) (in mm)	120 mm
Dimensions	Other Material and Tolerance	As per Table 25 & Clause 9.2 of IS 1239 (Part 2)
Dimensions	Bodies made from heavy tube conforming to IS 1239 (Part 1)	Yes
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #16 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Fitting	Elbow Equal
Dimensions	Nominal Size of Outlet (in mm)	15 mm
Dimensions	Minimum Length, Centre to Face (in mm)	32 mm
Dimensions	Other Material and Tolerance	As per Clause 9.2 of IS 1239 (Part 2)
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #17 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Fitting	Tee Equal
Dimensions	Nominal Size of Outlet (in mm)	15 mm
Dimensions	Minimum Length, Centre to Face (in mm)	32 mm
Dimensions	Other Material and Tolerance	As per Clause 9.2 of IS 1239 (Part 2)
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #18 Details

View Catalog

Category	Specification	Requirement
Dimensions	Nominal Size of Outlet (in mm)	15 mm
Dimensions	Minimum Length (A) (in mm)	115 mm
Dimensions	Other Material and Tolerance	As per Table 25 & Clause 9.2 of IS 1239 (Part 2)
Dimensions	Bodies made from heavy tube conforming to IS 1239 (Part 1)	Yes
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Item #19 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 15778	Yes
Generic	Maximum Continuous Working Temperature (°C)	Up to and including 82 °C
Generic	Colour	Off-white
Generic	Pressure Class	Class 1
Generic	Standard Dimension Ratio (SDR)	SDR 11 (Class 1)
Generic	Nominal Working Pressure	At 27 °C - 2.76 MPa (SDR 11), At 82 °C - 0.68 MPa (SDR 11)
Dimensions	Nominal Pipe Size (in mm) x Nominal Outside Diameter (in mm)	20 mm x 22.2 mm
Dimensions	Mean Outside Diameter in mm (Minimum x Maximum)	As per Table 2 of IS 15778
Dimensions	Outside Diameter at any point in mm (Minimum x Maximum)	As per Table 2 of IS 15778
Dimensions	Wall Thickness (in mm)	As per Table 2 of IS 15778
Dimensions	Dimensions of Pipes (in mm)	As per Clause 7 of IS 15778
Dimensions	Effective Pipe Length (in meter)	3 meter
Performance & Characteristics	Density of Pipe (in kg/m³)	1450 kg/m³ to 1650 kg/m³
Performance & Characteristics	Composition	As per Clause 6 of IS 15778
Performance & Characteristics	Pipe Ends	As per Clause 8 of IS 15778
Performance & Characteristics	Physical and Chemical Characteristics	As per Clause 9 of IS 15778
Performance & Characteristics	Mechanical Properties	As per Clause 10 of IS 15778

Item #20 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 15778	Yes
Generic	Maximum Continuous Working Temperature (°C)	Up to and including 82 °C
Generic	Colour	Off-white
Generic	Pressure Class	Class 1
Generic	Standard Dimension Ratio (SDR)	SDR 11 (Class 1)
Generic	Nominal Working Pressure	At 27 °C - 2.76 MPa (SDR 11), At 82 °C - 0.68 MPa (SDR 11)
Dimensions	Nominal Pipe Size (in mm) x Nominal Outside Diameter (in mm)	25 mm x 28.6 mm
Dimensions	Mean Outside Diameter in mm (Minimum x Maximum)	As per Table 2 of IS 15778
Dimensions	Outside Diameter at any point in mm (Minimum x Maximum)	As per Table 2 of IS 15778
Dimensions	Wall Thickness (in mm)	As per Table 2 of IS 15778
Dimensions	Dimensions of Pipes (in mm)	As per Clause 7 of IS 15778
Dimensions	Effective Pipe Length (in meter)	3 meter
Performance & Characteristics	Density of Pipe (in kg/m³)	1450 kg/m³ to 1650 kg/m³
Performance & Characteristics	Composition	As per Clause 6 of IS 15778
Performance & Characteristics	Pipe Ends	As per Clause 8 of IS 15778
Performance & Characteristics	Physical and Chemical Characteristics	As per Clause 9 of IS 15778
Performance & Characteristics	Mechanical Properties	As per Clause 10 of IS 15778

Item #21 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Fitting	Elbow Equal
Dimensions	Nominal Size of Outlet (in mm)	20 mm
Dimensions	Minimum Length, Centre to Face (in mm)	35 mm
Dimensions	Other Material and Tolerance	As per Clause 9.2 of IS 1239 (Part 2)
Mechanical Properties	Galvanizing	Yes (As per Clause 13 of IS 1239 (Part 2))
Mechanical Properties	Joints of Tubulars and Fittings	As per Clause 10 of IS 1239 (Part 2)
Manufacturing and Marking	Manufacturing of Material	As per Clause 6 & Clause 9 of IS 1239 (Part 2)
Manufacturing and Marking	Marking	As per Clause 15 of IS 1239 (Part 2)

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

HARYANA State tenders

GURUGRAM , HARYANA City tenders

Categories 4 available

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Commercial UPVC Fittings,CPVC Ball Valve,Pipe Clamps (V2),Pipe Clamps (V2),Pipe Clamps (V2),Solvent in GURGAON, HARYANA

Authority & Contact

Reverse Auction Schedule

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 23

GeM-Bidding-9638741.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

GEM General Terms and Conditions Document

Categories 25

Corrigendum Updates

Update

Update

Required Documents

Technical Specifications 21 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Explore More Opportunities

Documents

Unlock All Documents

GeM-Bidding-9638741.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7