Contract Bidding Open For E1,E2,E3,E4,E5,E6,E7,E8,E9,E10,E11,E12,E13,E14,E15,E16,E17,E18,E19,E20,E21,E22,E23,E24,E25,E26,E27, in SALEM, TAMIL NADU

Supply of 15 Watt, 20A / 6.6 A rating 5000V, 50 Hz Series Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable confirming to specification as required.

Supply of 200 Watt, 20A / 6.6A rating 5000V, 50 Hz Series Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable confirming to specification as required.

Supply of 200 Watt, 6.6Amp, Bi-Pin Halogen lamp for runway edge light fitting similar to Model Osram 64386 or its equivalent from AAI Preferred make list.

Supply of 6 sq.mm, 5 KV grade dry type Plug and Receptacle of type I, class B primary connector kit with field attachment and suitable for 5 KV grade single core copper conductor, copper braided, XLPE insulated PE outer sheathed shielded cable, complete as required confirming to the technical specifications similar to Make Bildal or its equivalent from AAI Preferred make list.

Supply of 2 x 2.5sq.mm 2 pin secondary plug assembly of 0.5 mtrs length suitable for runway/taxiway/approach light fittings.

Supply of clear lens / yellow filter suitable for Inset Type Bi-directional Runway edge Light Fitting complete as per ICAO specification etc. as required and as specified and suitable for Make ADB safegate.

Supply of Red Spreader lens for APN for Elevated type Threshold fixtures with suitable rubber gasket meeting the requirement of ICAO Annex-14 & Aerodrome design maual part - IV, suitable to AMA make.

Supply of C.I. Isolating Transformer housing box,water tight round type,metal container of outside size 330mm height 450mm made of 10mm thick cast iron moulding suitable to receive a light fitting base plate on the top and underground housing associated with transformer power cable and having a clear hole centre at one side surface centre 75mm above bottom surface suitable to receive one No. / two of 50mm dia B class GI pipe and including check nuts as required and another hole at 175mm from the bottom of the CI Box to receive one no. 15mm dia B class GI pipe and check nut as required.The box should have two SS earth bolts of M10 x 30mm tapped inside near the hole 4 inch away from the hole centre and having a drain hole at the bottom suitably tapped to receive 15mm dia B class GI pipe and having clear opening of 220 mm at the top surface and 6 nos. M10 tapped hole at the hole centre 260 mm to receive fitting base plate and bolts as required as per the drawings.

Supply of 360 degree inner clear lens suitable for AUN Runway Elevated type light fitting. Make AMA

Supply of O ring suitable for Inset fitting of ADB Safegate make AGL etc as required.

Supply of 48 V DC coil plugin 5 step relay etc. as required.

Supply of operational area LED sign board driver, suitable to operate on runway current on series circuit current varying from 2.8 to 6.6 Amp. Make Electro Systems or equivalent

Supply of 2.5 Sq.mm single core of FRLS PVC insulated copper conductor single core wire, 1100 V, confirming to IS 694 etc as required.

Supply of 5/6 A, 230 V, AC Modular Switch etc. as required.

Supply of 3 pin 5/6 A, 230 V, AC Modular Socket etc. as required.

Supply of SP MCB 5 amps to 32 amps rating, 240/415 volts, C curve. Make as per list of Preferred makes as required.

Supply of TP MCB 20 amps rating, 240/415 volts, C curve. Make as per list of Preferred makes as required.

Supply of FP MCB 32 amps rating, 240/415 volts, C curve. Make as per list of Preferred makes as required.

Supply of FP MCB 100 amps rating, 240/415 volts, C curve. Make as per list of Preferred makes as required.

Supply of power contactor of rating 200 amps Type MCX 33, Make L and T, 4 pole suitable for operation on 3 phase, 415 Volt, 50 HZ AC supply having coil voltage of 240 Volt AC complete as required for existing AMF panel.