GEM

Indian Army Cable Termination & Cable Joint Kit ISI 694 33kV Udhamapur Jammu & Kashmir 2026

Q: What standards apply to the 33kV termination kit tender in J&K?

Bidders must comply with **IS 694** for ISI marked termination/joint kits and **IS 13573 (Part 1)** for insulation and conductor compatibility, ensuring ISI marking and OEM authorization as required.

Q: What is the delivery location for the Udhamur cable kit contract?

Delivery is to **GE UTILITY UDHAMPUR, NEAR MES GURUDAWARA, CHOPRA SHOP PO-GARHI, UDHAMPUR, J&K 182121** with potential installation support per scope.

Q: What is the estimated contract value for the Udhamur tender?

The estimated value is **₹512,628.00**, guiding bidder assessments on material quantities, lead times, and compliance with IS 694 and IS 13573 standards.

Q: Are OEM authorizations mandatory for this government bid?

Yes. Bidders must provide **OEM Manufacturer Authorization** or proof of OEM identity for distributors, including contact details, to participate.

Q: What is the impact of quantity variation on delivery time?

The purchaser may adjust quantity by up to **±25%**; delivery extensions follow the stated rule based on original and extended periods, with a minimum extension of 30 days.

Q: What qualifies as eligible experience for the Indian Army tender?

A bidder or OEM must demonstrate at least **3 years** of supplying similar Category Products to govt/PSU entities, with contract copies from each year.

Bid Publish Date

17-Feb-2026, 9:55 pm

Bid End Date

26-Feb-2026, 9:00 am

Value

₹5,12,628

Location

UDHAMPUR , JAMMU AND KASHMIR

Latest Corrigendum Available

Progress

Issue17-Feb-2026, 9:55 pm

Corrigendum23-Feb-2026

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

520

Tender Overview

Organization: Indian Army, Department Of Military Affairs, procuring Cable Termination Kit and Cable Joint Kit suitable for cables up to and including 33 kV (V2), ISI marked under IS 694 (Q2). Estimated value around ₹512,628.00 for delivery to UDHAMPUR, J&K 182101. Delivery address: GE UTILITY UDHAMPUR, NEAR MES GURUDAWARA, CHOPRA SHOP PO-GARHI. Key tender focus includes conformity to IS 13573 (Part 1) for insulation and core configurations. Emphasizes OEM/Manufacturer authorization and 3-year government supply experience.

Key Specifications

Cable Termination Kit up to 33 kV (V2) and Cable Joint Kit up to 33 kV (V2) conforming to IS 694
Applicable conductors and insulation per IS 13573 (Part 1) Table 2
Cross-sectional area and core count to be specified per kit type
ISI marking compliance required; OEM authorization for bidders
Delivery at GE Utility Udhampur; installation/commissioning (if scope) may be included

Terms & Conditions

Option Clause allows ±25% quantity change at contract placement and during currency
Delivery address specified: GE UTILITY UDHAMPUR, J&K
3 years of prior govt/PSU supply experience required with contract evidence

Important Clauses

Payment Terms

Not explicitly stated; refer to Buyer Added Terms for payment schedule and advance requirements

Delivery Schedule

Delivery lead time adjustable with quantity variation; minimum delivery time guidance linked to original delivery period

Penalties/Liquidated Damages

Not specified; subject to standard govt contract penalties and supplier performance terms

Bidder Eligibility

3 years of regular supply to Central/State Govt or PSU with contract copies
OEM authorization or proof of being OEM/distributor with certificate
Compliance with IS 694 ISI marking and IS 13573 (Part 1) requirements

Documents 15

GeM-Bidding-8985035.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

11Kv Single Core 185 sqmm XLPE Insulated Cable,Heat Shrinkable Indoor end Termination Kit

Mishra Dhatu Nigam Limited (midhani)

HYDERABAD, TELANGANA

Posted: 30 September 2025

Closed: 28 October 2025

GEM

Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination

Indian Army

SRINAGAR, JAMMU & KASHMIR

Posted: 8 February 2025

Closed: 11 February 2025

GEM

Cable Termination Kit (V2)

Diesel Loco Modernisation Works

PATIALA, PUNJAB

Posted: 22 March 2025

Closed: 1 April 2025

GEM

Cable Termination Kit (V2)

Visvesvaraya Iron And Steel Plant

SHIMOGA, KARNATAKA

Posted: 20 February 2025

Closed: 3 March 2025

GEM

South Central Railway Cable Termination Kit (V2) Tender Chittoor Andhra Pradesh IS 13573 Part 1 2026

South Central Railway

CHITTOOR, ANDHRA PRADESH

Posted: 10 January 2026

Closed: 24 January 2026

GEM

Technical Specifications 13 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 2 and Part 3) Working Voltages from 3.3 kV up to and including 33 kV
STANDARD	Type of termination kit	Outdoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3
GENERIC	Applicable cable size for using the termination kits (in sq mm)	240
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #2 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of termination kit	Outdoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	EPR, HEPR (Range of approval: EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3.5
GENERIC	Applicable cable size for using the termination kits (in sq mm)	35
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #3 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of termination kit	Indoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3.5
GENERIC	Applicable cable size for using the termination kits (in sq mm)	120
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #4 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of termination kit	Outdoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	EPR, HEPR (Range of approval: EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3.5
GENERIC	Applicable cable size for using the termination kits (in sq mm)	150
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #5 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of termination kit	Outdoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3.5
GENERIC	Applicable cable size for using the termination kits (in sq mm)	185
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #6 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of termination kit	Indoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3.5
GENERIC	Applicable cable size for using the termination kits (in sq mm)	240
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #7 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 2 and Part 3) Working Voltages from 3.3 kV up to and including 33 kV
STANDARD	Type of termination kit	Indoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3
GENERIC	Applicable cable size for using the termination kits (in sq mm)	185
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #8 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 2 and Part 3) Working Voltages from 3.3 kV up to and including 33 kV
STANDARD	Type of termination kit	Indoor Termination - Heat Shrink
GENERIC	Applicable conductors for using the termination kits	Aluminium
GENERIC	The appropriate cable insulation for using the termination kits [Ref. Cl. Table 2 of IS 13573 (Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the termination kits (in Nos)	3
GENERIC	Applicable cable size for using the termination kits (in sq mm)	150
GENERIC	Termination kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Anti Tracking Tubing, Heat Shrink Cable Breakout, Heat Shrink Lug Sealing Tubing, Copper Earthing Tinned Braid With Crimped Lug, Copper Tinned Earthing Braid, Solder, Flux, Jubilee Clamp, Backup Ring, Mastic Tapes, Connector (Lugs), PVC (A) Tape, Amalgamating Insulation Tape for Lug Sealing, Core Cleaning Solvent, Semiconductor Paint, Silicon Grease, Nylon String, Aloxite Tape, Tinned Copper Binding Wire, Mopping Cloth, , Instruction Sheet

Item #9 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of joint kit	Non Rigid - Transition Joint - Heat Shrink
GENERIC	Applicable conductors for using the joint kits	Aluminium
GENERIC	The appropriate cable insulation for using the joint kits [Ref. Cl. Table 2 of IS 13573 Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the joint kits (in Nos)	3.5
GENERIC	Applicable cable size for using the joint kits (in sq mm)	70
GENERIC	Joint kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Insulating Tubing, Heat Shrink Co-extruded Dual Wall Tubing, Heat Shrink Outer Jacket Tubing, G. I. Mesh Type Metallic Cannister, Tinned Copper Earthing Braid, Jubilee Clamp, Backup Ring, Mastic Tapes, Tinned Copper Binding Wire, Core Cleaning Solvent, Nylon String, Aloxite Tape, PVC (A) Tape, Silicon Grease, Tinned Copper Mesh for screen continuity, Solder, Flux, Mopping Cloth, Connector (ferrules), Instruction Sheet

Item #10 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 2 and Part 3) Working Voltages from 3.3 kV up to and including 33 kV
STANDARD	Type of joint kit	Non Rigid - Transition Joint - Heat Shrink
GENERIC	Applicable conductors for using the joint kits	Aluminium
GENERIC	The appropriate cable insulation for using the joint kits [Ref. Cl. Table 2 of IS 13573 Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the joint kits (in Nos)	3.5
GENERIC	Applicable cable size for using the joint kits (in sq mm)	50
GENERIC	Joint kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Insulating Tubing, Heat Shrink Co-extruded Dual Wall Tubing, Heat Shrink Outer Jacket Tubing, G. I. Mesh Type Metallic Cannister, Tinned Copper Earthing Braid, Jubilee Clamp, Backup Ring, Mastic Tapes, Tinned Copper Binding Wire, Core Cleaning Solvent, Nylon String, Aloxite Tape, PVC (A) Tape, Silicon Grease, Tinned Copper Mesh for screen continuity, Solder, Flux, Mopping Cloth, Connector (ferrules), Instruction Sheet

Item #11 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 2 and Part 3) Working Voltages from 3.3 kV up to and including 33 kV
STANDARD	Type of joint kit	Non Rigid - Transition Joint - Heat Shrink
GENERIC	Applicable conductors for using the joint kits	Aluminium
GENERIC	The appropriate cable insulation for using the joint kits [Ref. Cl. Table 2 of IS 13573 Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the joint kits (in Nos)	3.5
GENERIC	Applicable cable size for using the joint kits (in sq mm)	300
GENERIC	Joint kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Insulating Tubing, Heat Shrink Co-extruded Dual Wall Tubing, Heat Shrink Outer Jacket Tubing, G. I. Mesh Type Metallic Cannister, Tinned Copper Earthing Braid, Jubilee Clamp, Backup Ring, Mastic Tapes, Tinned Copper Binding Wire, Core Cleaning Solvent, Nylon String, Aloxite Tape, PVC (A) Tape, Silicon Grease, Tinned Copper Mesh for screen continuity, Solder, Flux, Mopping Cloth, Connector (ferrules), Instruction Sheet

Item #12 Details

View Catalog

Category	Specification	Requirement
STANDARD	Conformity of the specification	As per IS 13573 (Part 1) Working Voltages from 1.1 kV up to and including 3.3 kV
STANDARD	Type of joint kit	Non Rigid - Transition Joint - Heat Shrink
GENERIC	Applicable conductors for using the joint kits	Aluminium
GENERIC	The appropriate cable insulation for using the joint kits [Ref. Cl. Table 2 of IS 13573 Part 1)]	XLPE (Range of approval: XLPE, EPR, HEPR, PVC)
GENERIC	Applicable cable core for using the joint kits (in Nos)	3.5
GENERIC	Applicable cable size for using the joint kits (in sq mm)	400
GENERIC	Joint kit contains (Hint: According to the type of cable, the cross sectional area of the cable and number of cores)	Heat Shrink Stress Control Tubing, Heat Shrink Insulating Tubing, Heat Shrink Co-extruded Dual Wall Tubing, Heat Shrink Outer Jacket Tubing, G. I. Mesh Type Metallic Cannister, Tinned Copper Earthing Braid, Jubilee Clamp, Backup Ring, Mastic Tapes, Tinned Copper Binding Wire, Core Cleaning Solvent, Nylon String, Aloxite Tape, PVC (A) Tape, Silicon Grease, Tinned Copper Mesh for screen continuity, Solder, Flux, Mopping Cloth, Connector (ferrules), Instruction Sheet

Item #13 Details

View Catalog

Category	Specification	Requirement
GENERIC	Category of Cable	FR
GENERIC	Conductor Material	Annealed Bare copper
GENERIC	Form of Conductor	Stranded (Class 2)
GENERIC	Nominal Cross Sectional Area of Conductor (in Sq mm)	10.0
GENERIC	Type of Insulation	Type A
GENERIC	Number of Core	2 Core
GENERIC	Sheath Type	Type ST1

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

GST registration certificate

Permanent Account Number (PAN) card

Experience certificates showing 3 years of govt/PSU supply

Financial statements or turnover proof as required

EMD/Security deposit documents (as per terms)

OEM authorization or Manufacturer Authorization certificate

Technical bid documents and conformity certificates to IS 694 and IS 13573 (Part 1)

Inspection reports or pre-dispatch/post-dispatch inspection provisions (if applicable)

Corrigendum Updates

1 Update

Update

23-Feb-2026

Extended Deadline

26-Feb-2026, 9:00 am

Opening Date

26-Feb-2026, 9:30 am

Frequently Asked Questions

Key insights about JAMMU AND KASHMIR tender market

How to bid for the cable termination kit tender in Udhampur?

Bidders must meet the 3-year govt/PSU supply criterion, provide OEM authorization, IS 694 ISI marking, and IS 13573 (Part 1) insulation compatibility. Include financials, GST, PAN, and EMD documents, plus delivery readiness at GE Utility Udhampur, with installation terms if included.

What documents are required for the Udhamur cable tender submission?

Submit GST certificate, PAN, 3-year govt/PSU experience contracts, financial statements, EMD, OEM authorization, ISI conformity certificates, and technical bid detailing cross sections, conductors, and insulation per IS 13573 Part 1.

What standards apply to the 33kV termination kit tender in J&K?

Bidders must comply with IS 694 for ISI marked termination/joint kits and IS 13573 (Part 1) for insulation and conductor compatibility, ensuring ISI marking and OEM authorization as required.

What is the delivery location for the Udhamur cable kit contract?

Delivery is to GE UTILITY UDHAMPUR, NEAR MES GURUDAWARA, CHOPRA SHOP PO-GARHI, UDHAMPUR, J&K 182121 with potential installation support per scope.

What is the estimated contract value for the Udhamur tender?

The estimated value is ₹512,628.00, guiding bidder assessments on material quantities, lead times, and compliance with IS 694 and IS 13573 standards.

Are OEM authorizations mandatory for this government bid?

Yes. Bidders must provide OEM Manufacturer Authorization or proof of OEM identity for distributors, including contact details, to participate.

What is the impact of quantity variation on delivery time?

The purchaser may adjust quantity by up to ±25%; delivery extensions follow the stated rule based on original and extended periods, with a minimum extension of 30 days.

What qualifies as eligible experience for the Indian Army tender?

A bidder or OEM must demonstrate at least 3 years of supplying similar Category Products to govt/PSU entities, with contract copies from each year.

Similar Tenders

5 found

Urgent

PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Flexible Conductor (V2

Directorate Of Purchase And Stores

⏰ Deadline: 6 days left

🛒 Type: Goods

View GEM

Urgent

Cable Joint Kit Suitable for Cables Up to and Including 33 kV (V2)

East Central Railway

📍 DHANBAD, JHARKHAND

⏰ Deadline: 7 days left

🛒 Type: Goods

View GEM

Urgent

East Central Railway Cable Joint Kit Tender 33 kV ISI/IS 13573 Conformity 2026

East Central Railway

📍 DHANBAD, JHARKHAND

⏰ Deadline: 6 days left

🛒 Type: Goods

View GEM

Urgent

LED Batten,LED Batten,Cable Joint Kit Suitable for Cables Up to and Including 33 kV (V2),Cable Join

Indian Army

EMD: ₹76,410

⏰ Deadline: 5 days left

🛒 Type: Goods

View GEM

Urgent

Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Joint Kit (V

N/a

📍 KANPUR NAGAR, UTTAR PRADESH

EMD: ₹52,195

Est: ₹52.2 L

⏰ Deadline: 3 days left

🛒 Type: Goods

View GEM

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

JAMMU AND KASHMIR State tenders

UDHAMPUR , JAMMU AND KASHMIR City tenders

Categories 4 available

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 15

GeM-Bidding-8985035.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Indian Army Cable Termination & Cable Joint Kit ISI 694 33kV Udhamapur Jammu & Kashmir 2026

Latest Corrigendum Available

Categories 22

Tender Overview

Key Specifications

Terms & Conditions

Important Clauses

Payment Terms

Delivery Schedule

Penalties/Liquidated Damages

Bidder Eligibility

Documents 15

GeM-Bidding-8985035.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

11Kv Single Core 185 sqmm XLPE Insulated Cable,Heat Shrinkable Indoor end Termination Kit

Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination

Cable Termination Kit (V2)

Cable Termination Kit (V2)

South Central Railway Cable Termination Kit (V2) Tender Chittoor Andhra Pradesh IS 13573 Part 1 2026

Technical Specifications 13 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Corrigendum Updates

Update

Frequently Asked Questions

Similar Tenders

PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Flexible Conductor (V2

Cable Joint Kit Suitable for Cables Up to and Including 33 kV (V2)

East Central Railway Cable Joint Kit Tender 33 kV ISI/IS 13573 Conformity 2026

LED Batten,LED Batten,Cable Joint Kit Suitable for Cables Up to and Including 33 kV (V2),Cable Join

Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Termination Kit (V2),Cable Joint Kit (V

Explore More Opportunities

Unlock Tender Documents

Documents 15

GeM-Bidding-8985035.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13