Closed GEM

Tender Notice for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in LEH, JAMMU & KASHMIR

Bid Publish Date

11-Aug-2026, 4:41 pm

Bid End Date

25-Aug-2026, 11:00 am

Location

LEH LADAKH , JAMMU AND KASHMIR

WhatsApp Generate Docs

Progress

Issue11-Aug-2026, 4:41 pm

AwardPending

Indian Army invites bids for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Bathroom or Toilet Mirror (V3) (Q4), Towel Ring (Q3), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Soap Dish - Case (Q4), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Floor Drain Traps (V2) (Q3), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Towel Rail (Q3), Flexible Drain Hoses for Wash Basins/ Sinks (Q3), Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3), Bathroom Water Shower (V2) (Q3), Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) in LEH, JAMMU & KASHMIR. Quantity: 172. Submission Deadline: 25-08-2026 11: 00: 00. Submit your proposal before the deadline.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Tender Data

Bid Details

Quantity

172

Preference & Exemptions

EMD Required

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

OEM Avg. Turnover

Past Performance

50 %

Experience Required

2 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Towel Ring (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Soap Dish - Case (Q4) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Floor Drain Traps (V2) (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Towel Rail (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , Bathroom Water Shower (V2) (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Leh

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Leh	Leh	-	-	2	45	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENTINDIAN ARMY

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 18

GeM-Bidding-9713342.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 16 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #2 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Die cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Acrylonitrille butadiene rubber (ABR)
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #3 Details

View Catalog

Category	Specification	Requirement
Generic	Ring Shape	D-Shape
Material & Dimensions	Ring Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	140 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	8 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	50 mm
Material & Dimensions	Mounting Plate Size (in mm)	40 mm
Design & Configuration	Ring Movement Type	Fixed Ring
Load & Performance	Recommended Load Capacity (in kg)	Up to 2 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #4 Details

View Catalog

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	TRANSPARENT
Lid Details	Lid type (according to fixation)	HINGED

Item #5 Details

View Catalog

Category	Specification	Requirement
Generic	Material	Stainless Steel
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	No
Design & Construction	Anti-Odor Feature	Yes
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	150 mm x 150 mm x 100 mm
Performance	Flow Rate Capacity	Medium Duty

Item #6 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	20 mm (3/4")
Generic	Hot/Cold Identification of Control Devices	Red Color or Letter H for Hot Water
Materials	Material of Body of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Rubber
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Item #7 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	50 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	17.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	6.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	20.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	68 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #8 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Unplasticized Polyvinyl Chloride (PVC) Pipe (Conformity to Is 4985)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Item #9 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Stainless Steel
End Connections & Fittings	Surface Finish	Nickel Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Item #10 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #11 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Acrylonitrille butadiene rubber (ABR)
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #12 Details

View Catalog

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Double Layered
Dimensions	Minimum Net Capacity (In Liter)	500 Liter

Item #13 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #14 Details

View Catalog

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	Stainless Steel
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Rainfall and Multiple flow
Type	Type of Multiple flow	Rainstream
Type	Shape of Shower	Oval
Dimensions	Size of Shower	190 x 295 mm
Dimensions	Overall length of Hand Shower (in mm)	205
Dimensions	Length of Hand Shower Tube (in mt)	1.5
Dimensions	Diameter of Hand Shower Tube (in mm)	8
Dimensions	Material of Hand Shower Tube	Stainless Steel
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	1

Item #15 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Die cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #16 Details

View Catalog

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	Yes
Test Report	Test Report to be furnished to the buyer on demand	Yes

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

JAMMU AND KASHMIR State tenders

LEH LADAKH , JAMMU AND KASHMIR City tenders

Categories 4 available

FLUID MECHANICS EQUIPMENT

OVER HEAD TANK

SLIDER VALVES

PLUMBER BLOCK

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Tender Notice for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in LEH, JAMMU & KASHMIR

Authority & Contact

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 18

GeM-Bidding-9713342.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

GEM General Terms and Conditions Document

Categories 43

Required Documents

Technical Specifications 16 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Explore More Opportunities

Documents

Unlock All Documents

GeM-Bidding-9713342.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

GEM General Terms and Conditions Document