Bids are Invited For NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M,NW40 - 48.26 OD x 2.77 t
Bid Publish Date
15-Oct-2026, 3:19 pm
Bid End Date
26-Oct-2026, 3:00 pm
EMD
₹1,100
Progress
Hindustan Shipyard Limited (hsl) invites bids for NW50 - 60. 3OD x 2. 77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M, NW40 - 48. 26 OD x 2. 77 thk Seamless SS316 SCH10-10S pipe, NW15 - 21. 34OD x 2. 11thk Sch 10S SS316L seamless Pipe as per ASTM A312- 312M, SS316 Pipes NW100 - 114. 3 OD x 6. 02wt Sch 40 as per ASTM A312, SS316 Pipes NW65 - 73. 0 OD x 5. 16wt Sch 40 as per ASTM A312, SS316 Pipes NW15 - 21. 34 OD x 2. 77wt Sch 40 as per ASTM A312, NW50 Seamless SS316 1. 5D 90 deg bends Sch 10 as per ASTM A312, NW40 - 48. 26 OD x 2. 77 thk SS316 SCH10-10S 90 deg Elbow, 1. 5D, NW100 - 114. 3 OD x 6. 02wt SS316 90 deg Elbow, 1. 5D, NB15 SS SCH-40S 90 Deg Elbow PN10, NB65xNB100 SS SCH40S REDUCER PN10, NW100 STAINLESS STEEL - SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220, T 20, PCD 180, N 8, D2 18, ID 117, NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1, NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165, T 18, PCDb 125, N4, d2 18, ID 62, NW50 SS SLIP ON BLIND FLANGE PN10, NW40 SS316 FLANGE PN10, NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182, NW15 SS SLIP ON BLIND FLANGE PN10. Quantity: 2031. Submission Deadline: 26-10-2026 15: 00: 00. Submit your proposal before the deadline.
Tender Data
Bid Details
Quantity
2031
Category
NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Item wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
No
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Arbitration Clause
Yes (Arbitration clause document) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts
Mediation Clause
Yes (Mediation clause document) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 mediation clause should not be routinely included in contracts and pre- litigation mediation can be taken up without any such clause also
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M , NW40 - 48.26 OD x 2.77 thk Seamless SS316 SCH10-10S pipe , NW15 - 21.34OD x 2.11thk Sch 10S SS316L seamless Pipe as per ASTM A312- 312M , SS316 Pipes NW100 - 114.3 OD x 6.02wt Sch 40 as per ASTM A312 , SS316 Pipes NW65 - 73.0 OD x 5.16wt Sch 40 as per ASTM A312 , SS316 Pipes NW15 - 21.34 OD x 2.77wt Sch 40 as per ASTM A312 , NW50 Seamless SS316 1.5D 90 deg bends Sch 10 as per ASTM A312 , NW40 - 48.26 OD x 2.77 thk SS316 SCH10-10S 90 deg Elbow, 1.5D , NW100 - 114.3 OD x 6.02wt SS316 90 deg Elbow, 1.5D , NB15 SS SCH-40S 90 Deg Elbow PN10 , NB65xNB100 SS SCH40S REDUCER PN10 , NW100 STAINLESS STEEL - SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220,T 20,PCD 180,N 8,D2 18,ID 117 , NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1 , NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165,T 18,PCDb 125,N4,d2 18,ID 62 , NW50 SS SLIP ON BLIND FLANGE PN10 , NW40 SS316 FLANGE PN10 , NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182 , NW15 SS SLIP ON BLIND FLANGE PN10
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
24
Payment Timelines
Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
40
Delivery Locations
1
Delivery Cities
VISHAKHAPATNAM CITY
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | VISHAKHAPATNAM CITY | VISHAKHAPATNAM CITY | - | - | 350 | 40 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 9
GeM-Bidding-10041099.pdf
Main Document
Other Documents
OTHER
Other Documents
OTHER
Other Documents
OTHER
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
18 Items Sign in to view GEM price trends Sign in for GEM prices
NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M
NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312/312M as per TTS
NW40 - 48.26 OD x 2.77 thk Seamless SS316 SCH10-10S pipe
NW40 - 48.26 OD x 2.77 thk Seamless SS316 SCH10-10S pipe as per TTS
NW15 - 21.34OD x 2.11thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M
NW15 - 21.34OD x 2.11thk Sch 10S SS316L seamless Pipe as per ASTM A312/312M as per TTS
SS316 Pipes NW100 - 114.3 OD x 6.02wt Sch 40 as per ASTM A312
SS316 Pipes NW100 - 114.3 OD x 6.02wt Sch 40 as per ASTM A312 as per TTS
SS316 Pipes NW65 - 73.0 OD x 5.16wt Sch 40 as per ASTM A312
SS316 Pipes NW65 - 73.0 OD x 5.16wt Sch 40 as per ASTM A312 as per TTS
SS316 Pipes NW15 - 21.34 OD x 2.77wt Sch 40 as per ASTM A312
SS316 Pipes NW15 - 21.34 OD x 2.77wt Sch 40 as per ASTM A312 as per TTS
NW50 Seamless SS316 1.5D 90 deg bends Sch 10 as per ASTM A312
NW50 Seamless SS316 1.5D 90 deg bends Sch 10 as per ASTM A312 as per TTS
NW40 - 48.26 OD x 2.77 thk SS316 SCH10-10S 90 deg Elbow, 1.5D
NW40 - 48.26 OD x 2.77 thk SS316 SCH10-10S 90 deg Elbow, 1.5D as per TTS
NW100 - 114.3 OD x 6.02wt SS316 90 deg Elbow, 1.5D
NW100 - 114.3 OD x 6.02wt SS316 90 deg Elbow, 1.5D as per TTS
NB15 SS SCH-40S 90 Deg Elbow PN10
NB15 SS SCH-40S 90 Deg Elbow PN10 as per TTS
NB65xNB100 SS SCH40S REDUCER PN10
NB65xNB100 SS SCH40S REDUCER PN10 as per TTS
NW100 STAINLESS STEEL - SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220,T 20,PCD 180,N 8,D2 18,ID 117
NW100 STAINLESS STEEL -SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220,T 20,PCD 180,N 8,D2 18,ID 117 as per TTS
NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1
NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1 as per TTS
NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165,T 18,PCDb 125,N4,d2 18,ID 62
NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165,T 18,PCD 125,N 4,d2 18,ID 62 as per TTS
NW50 SS SLIP ON BLIND FLANGE PN10
NW50 SS SLIP ON BLIND FLANGE PN10 as per TTS
NW40 SS316 FLANGE PN10
NW40 SS316 FLANGE PN10 as per TTS
NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182
NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182 Gr.F316 as per EN1092-1 as per TTS
NW15 SS SLIP ON BLIND FLANGE PN10
NW15 SS SLIP ON BLIND FLANGE PN10 as per TTS
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M | NW50 - 60.3OD x 2.77thk Sch 10S SS316L seamless Pipe as per ASTM A312/312M as per TTS | 350 | m | [email protected] | 40 | |
| 2 | NW40 - 48.26 OD x 2.77 thk Seamless SS316 SCH10-10S pipe | NW40 - 48.26 OD x 2.77 thk Seamless SS316 SCH10-10S pipe as per TTS | 180 | m | [email protected] | 40 | |
| 3 | NW15 - 21.34OD x 2.11thk Sch 10S SS316L seamless Pipe as per ASTM A312-312M | NW15 - 21.34OD x 2.11thk Sch 10S SS316L seamless Pipe as per ASTM A312/312M as per TTS | 120 | m | [email protected] | 40 | |
| 4 | SS316 Pipes NW100 - 114.3 OD x 6.02wt Sch 40 as per ASTM A312 | SS316 Pipes NW100 - 114.3 OD x 6.02wt Sch 40 as per ASTM A312 as per TTS | 108 | m | [email protected] | 40 | |
| 5 | SS316 Pipes NW65 - 73.0 OD x 5.16wt Sch 40 as per ASTM A312 | SS316 Pipes NW65 - 73.0 OD x 5.16wt Sch 40 as per ASTM A312 as per TTS | 54 | m | [email protected] | 40 | |
| 6 | SS316 Pipes NW15 - 21.34 OD x 2.77wt Sch 40 as per ASTM A312 | SS316 Pipes NW15 - 21.34 OD x 2.77wt Sch 40 as per ASTM A312 as per TTS | 54 | m | [email protected] | 40 | |
| 7 | NW50 Seamless SS316 1.5D 90 deg bends Sch 10 as per ASTM A312 | NW50 Seamless SS316 1.5D 90 deg bends Sch 10 as per ASTM A312 as per TTS | 100 | nos | [email protected] | 40 | |
| 8 | NW40 - 48.26 OD x 2.77 thk SS316 SCH10-10S 90 deg Elbow, 1.5D | NW40 - 48.26 OD x 2.77 thk SS316 SCH10-10S 90 deg Elbow, 1.5D as per TTS | 100 | nos | [email protected] | 40 | |
| 9 | NW100 - 114.3 OD x 6.02wt SS316 90 deg Elbow, 1.5D | NW100 - 114.3 OD x 6.02wt SS316 90 deg Elbow, 1.5D as per TTS | 75 | nos | [email protected] | 40 | |
| 10 | NB15 SS SCH-40S 90 Deg Elbow PN10 | NB15 SS SCH-40S 90 Deg Elbow PN10 as per TTS | 50 | nos | [email protected] | 40 | |
| 11 | NB65xNB100 SS SCH40S REDUCER PN10 | NB65xNB100 SS SCH40S REDUCER PN10 as per TTS | 30 | nos | [email protected] | 40 | |
| 12 | NW100 STAINLESS STEEL - SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220,T 20,PCD 180,N 8,D2 18,ID 117 | NW100 STAINLESS STEEL -SS 316 SLIP ON FLANGE AS PER DIN 2501, PN 10, OD 220,T 20,PCD 180,N 8,D2 18,ID 117 as per TTS | 100 | nos | [email protected] | 40 | |
| 13 | NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1 | NW100 SS316L Slip on Flange flat faced PN16 rating, dimensions as per EN1092-1 as per TTS | 50 | nos | [email protected] | 40 | |
| 14 | NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165,T 18,PCDb 125,N4,d2 18,ID 62 | NW50 STAINLESS STEEL - SS 316 SLIP ON FLANGE per DIN 2501, PN 10, -OD 165,T 18,PCD 125,N 4,d2 18,ID 62 as per TTS | 200 | nos | [email protected] | 40 | |
| 15 | NW50 SS SLIP ON BLIND FLANGE PN10 | NW50 SS SLIP ON BLIND FLANGE PN10 as per TTS | 80 | nos | [email protected] | 40 | |
| 16 | NW40 SS316 FLANGE PN10 | NW40 SS316 FLANGE PN10 as per TTS | 150 | nos | [email protected] | 40 | |
| 17 | NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182 | NW15 Stainless steel Slip on flange, PN10, FF type, Mat ASTM A182 Gr.F316 as per EN1092-1 as per TTS | 150 | nos | [email protected] | 40 | |
| 18 | NW15 SS SLIP ON BLIND FLANGE PN10 | NW15 SS SLIP ON BLIND FLANGE PN10 as per TTS | 80 | nos | [email protected] | 40 |
Categories
20
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer