GEM

Bridge And Roof Company (India) Limited Cable Tray & Duct Accessories Tender 2025 Rajasthan - IS 550/ISI framework 2025

Posted

18 Oct 2025, 04:10 pm

Deadline

01 Nov 2025, 05:00 pm

Location

RAIGAD , MAHARASHTRA

Progress

Issue18 Oct 2025, 04:10 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

25989

Category

300 mm wide straight run cable tray

Bid Type

Two Packet Bid

Categories 6

CABLE TRAY CABLE INSTRUMENTATION CABLE CHANNEL TEE ANGLE

Tender Overview

Bridge And Roof Company (India) Limited invites bids for a range of cable tray and duct accessories, including 300 mm wide straight run cable tray, 750 mm wide straight run cable tray, reducers (750-300 RHS/LHS), bends (1000 mm radius for 300/750 mm trays), tee joints, and galvanised slotted channel trays (2 mm thick, 100 mm wide, 50 mm high). The BOQ comprises 20 items with unspecified quantities. The tender emphasizes strict adherence to the NIT and requires bidders to align with attached SOQR/Annexure C. A notable clause allows quantity variation up to 25% at contract rates and extended timelines based on the option clause.

Technical Specifications & Requirements

  • Product scope includes: tray systems and fittings for 300 mm and 750 mm wide trays, including horizontal/vertical bends, reducers, tee joints, and channel trays.
  • Structural details include use of angle supports: 50x50x6 mm for 300 mm wide, 65x65x6 mm for 750 mm wide.
  • Channel trays: galvanised, 2 mm thickness, 100 mm wide, 50 mm high for cable support; tray covers in sizes: 60x40, 150x40, 300x40.
  • BOQ lists 20 items; no explicit performance specs or material standards were provided in the data.
  • Delivery and verification terms rely on the buyer’s option clause and NIT-compliant submissions; bidder must read SOQR/Annexure-C.

Terms, Conditions & Eligibility

  • EMD details not disclosed in available data; bidders must review NIT and submit as required.
  • Quantity may vary up to 25% at contract placement and during the contract currency with rates unchanged.
  • Delivery period linked to original delivery order with potential extension based on the option clause, subject to minimum 30 days.
  • Bidder must adhere to NIT, complete documentation, and submit TPI/quality checks as specified.
  • Price bids should be inclusive of all charges and aligned with attached Annexure C requirements.
  • Compliance with buyer-added terms and supplier readiness to supply 20-item scope is essential.

Key Specifications

    • 300 mm wide straight run cable tray
    • 750 mm wide straight run cable tray
    • Reducers: 750-300 RHS and 750-300 LHS
    • Horizontal bends: 300 mm and 750 mm trays with 1000 mm bending radius
    • Vertical bends: outside/inside for 300 mm and 750 mm trays with 1000 mm bending radius
    • ** Tee joints** for 750 mm wide tray with 1000 mm bending radius
    • Angle supports: 50x50x6 mm (300 mm tray) and 65x65x6 mm (750 mm tray)
    • Galvanised slotted channel trays: 2 mm thickness, 100 mm wide, 50 mm high
    • Tray covers: 60x40 mm, 150x40 mm, 300x40 mm

Terms & Conditions

  • Option clause permits ±25% quantity variation at contract and during currency with rates fixed

  • Delivery period tied to last delivery order; extension via option clause with minimum 30 days

  • Bidder must submit compliant with NIT, annexures, and TPI disclosures; inclusive pricing

Important Clauses

Payment Terms

Not explicitly provided; bidders should refer to NIT and ATC for payment schedule, typically inclusive pricing with milestone payments.

Delivery Schedule

Delivery period commences from last date of original delivery order; extended time calculations apply per option clause with minimum 30 days.

Penalties/Liquidated Damages

Not specified in current data; bidders should review NIT and ATC for LD terms and performance penalties.

Bidder Eligibility

  • Experience in supplying cable tray systems and galvanised channel trays

  • Financial stability evidenced by last 2-3 years’ financial statements

  • Capability to comply with NIT, Annexure-C SOQR, and TPI requirements

Bill of Quantities (BOQ) 20 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 300 mm wide straight run cable tray Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.1 of SOQR i.e. Annexure- C 500 mtr [email protected] 42
2 750 mm wide straight run cable tray. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.2 of SOQR i.e. Annexure- C 11,200 mtr [email protected] 42
3 Reducers 750 - 300 RHS. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.3 of SOQR i.e. Annexure- C 1 nos [email protected] 42
4 Reducers 750 - 300 LHS. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.4 of SOQR i.e. Annexure- C 1 nos [email protected] 42
5 Horizontal bends for 300 mm wide tray with 1000 mm bending radius. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.5 of SOQR i.e. Annexure- C 1 nos [email protected] 42
6 Horizontal bends for 750 mm wide tray with 1000 mm bending radius. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.6 of SOQR i.e. Annexure- C 94 nos [email protected] 42
7 Vertical outside bends for 300 mm wide tray with 1000 mm bending radius Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.7 of SOQR i.e. Annexure- C 33 nos [email protected] 42
8 Vertical outside bends for 750 mm wide tray with 1000 mm bending radius. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.8 of SOQR i.e. Annexure- C 66 nos [email protected] 42
9 Vertical inside bends for 750 mm wide tray with 1000 mm bending radius Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.9 of SOQR i.e. Annexure- C 67 nos [email protected] 42
10 Tee joints for 750 mm wide tray with 1000 mm bending radius. Manufacturing, Supply & Delivery of Prefabricated Hot Dip Galvanised Steel cable Trays, Fabricated Out of Hot Rolled Sheet Steel with Rigid Welded construction Ladder Type With A Rung As Per Std. 7-51-0333, Of Approved Make and Cable Tray Fittings Inclusive Of All The Accessories As Per Approved drawings, Specifications. Refer Sl. A.10 of SOQR i.e. Annexure- C 2 nos [email protected] 42
11 300 mm wide using 50x50x6 mm angle on both sides. Manufacturing, supply & delivery of following cable trays including bends, tees, crosses, horizontal and vertical splices etc., as required using MS angle and rungs of 32 x 6 mm MS flat at 250 mm apart, including supply of hardware, primer/finished coats, as per approved drawings, specifications of this tender and directions of engineer-in-charge. Refer Sl. B.1 of SOQR i.e. Annexure- C 50 mtr [email protected] 42
12 750 mm wide using 65x65x6 mm angle on both sides. Manufacturing, supply & delivery of following cable trays including bends, tees, crosses, horizontal and vertical splices etc., as required using MS angle and rungs of 32 x 6 mm MS flat at 250 mm apart, including supply of hardware, primer/finished coats, as per approved drawings, specifications of this tender and directions of engineer-in-charge. Refer Sl. B.2 of SOQR i.e. Annexure- C 350 mtr [email protected] 42
13 Galvanised slotted channel trays of 2 mm thickness, 100 mm wide. and 50 mm high for supporting cables. Manufacturing, supply & delivery of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, inclusive of all the accessories as per approved drawings, specifications of this tender and directions of engineer-in-charge. Refer Sl. C.1 of SOQR i.e. Annexure- C 500 mtr [email protected] 42
14 For 300 mm wide straight run cable tray. Manufacturing and supply of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all materials, as per approved drawings, specifications of this tender and directions of engineer-in-charge. Refer Sl. D.1 of SOQR i.e. Annexure- C 100 mtr [email protected] 42
15 For 750 mm wide straight run cable tray. Manufacturing and supply of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all materials, as per approved drawings, specifications of this tender and directions of engineer-in-charge. Refer Sl. D.2 of SOQR i.e. Annexure- C 1,500 mtr [email protected] 42
16 Run of Duct 800 mm W X 400mm H Manufacturing and supply of galvanised iron duct and its supports as per standard. Duct configurations include duct equal tee, duct expander tee, duct reducer tee, duct offset bend, duct with reducer, vertical plane tee, vertical plane elbow, duct bridge (jump over), sleeves. Refer Sl. E.1 of SOQR i.e. Annexure- C 200 mtr [email protected] 42
17 Run of Duct 1200 mm W X 400mm H Manufacturing and supply of galvanised iron duct and its supports as per standard. Duct configurations include duct equal tee, duct expander tee, duct reducer tee, duct offset bend, duct with reducer, vertical plane tee, vertical plane elbow, duct bridge (jump over), sleeves. Refer Sl. E.2 of SOQR i.e. Annexure- C 650 mtr [email protected] 42
18 Tray of 60 mm W x 40 mm H with cover Manufacturing and supply of pre-fabricated anodised aluminium perforated trays and its supports including tees, bends and elbows, painting of supports including supply of supports & all the accessories, paint as per painting specifications. Refer Sl. F.1 of SOQR i.e. Annexure- C 5,370 mtr [email protected] 42
19 Tray of 150 mm W x 40 mm H with cover Manufacturing and supply of pre-fabricated anodised aluminium perforated trays and its supports including tees, bends and elbows, painting of supports including supply of supports & all the accessories, paint as per painting specifications. Refer Sl. F.2 of SOQR i.e. Annexure- C 2,652 mtr [email protected] 42
20 Tray of 300 mm W x 40 mm H with cover Manufacturing and supply of pre-fabricated anodised aluminium perforated trays and its supports including tees, bends and elbows, painting of supports including supply of supports & all the accessories, paint as per painting specifications. Refer Sl. F.3 of SOQR i.e. Annexure- C 2,652 mtr [email protected] 42

AI-Powered Bidder Prediction

Companies most likely to bid

Unlock Bidder Insights

AI predictions on likely bidders

Required Documents

1

GST registration certificate

2

Permanent Account Number (PAN) card

3

Experience certificates for similar cable tray projects

4

Financial statements (audited) for the last 2-3 years

5

EMD deposit proof (as per NIT) and payment method details

6

Technical bid documents demonstrating SOQR/Annexure-C compliance

7

OEM authorisation (if bidding as system integrator)

8

Product datasheets for cable trays, bends, reducers, and channel trays

9

IS/IEC certifications or conformity declarations (if specified in NIT)

Frequently Asked Questions

How to bid for cable tray tender in Rajasthan 2025

Bidders must submit GST, PAN, experience certificates, and financials; include EMD proof as per NIT, technical compliance with SOQR/Annexure-C, and ensure inclusive pricing for 20-item BOQ. Review ATC clauses for option-based quantity variations up to 25%.

What documents are required for Bridge And Roof cable tray procurement

Submit GST certificate, PAN, 2-3 years financial statements, experience certificates for similar projects, EMD proof, OEM authorizations if applicable, technical datasheets for trays, bends, reducers, and channel trays, plus SOQR/Annexure-C compliance.

What are the technical specifications for cable trays in this bid

Scope includes 300 mm and 750 mm wide straight trays, 50x50x6 mm/65x65x6 mm angle supports, galvanised 2 mm trays, 100 mm width channel trays, and covers in 60x40, 150x40, 300x40 sizes; bending radii set at 1000 mm for all bends.

When is the delivery period for the cable tray procurement

Delivery is governed by the last delivery order date; option clause may extend time based on additional quantity, with the minimum extension 30 days; rates in contract remain fixed during extension.

What is the EMD requirement for this tender in Rajasthan

EMD details are not disclosed in the provided data; bidders must verify the NIT; submit as per EMD amount specified in the official tender notice and ensure payment method compliance.

Which standards or certifications are required for these cable trays

If specified, the tender requires ISI/BIS conformity or IS 550 standard compliance; suppliers should attach relevant certification documents and product datasheets proving standards alignment.

How is price evaluated for the 20-item BOQ in this tender

Rates must be filled inclusively in the bid; prices should cover all components (tray, bends, reducers, channel trays, covers) with a single consolidated bid amount per item and total bid value.

Similar Tenders

Cables,COPPER FLEXIBLE CABLE 4C X 4 SQ. MM

Materials

ANGUL, ODISHA

View Details

INSULATED CABLE ENDS 25 MM SQ. COLOUR BLACK MAKE GROUPE SCHNEIDER OR EQV.,CABLE LUG M 8 X 50 MM SQ.

Department of Heavy Industry

Ajmer, RAJASTHAN

View Details

Heat Shrinking Tubes 20kV,after shrinkage 1.2mm diameter,Heat Shrinking Tubes 20kV, after shrinkage

Department of Electronics and Information Technology

THIRUVANANTHAPURAM, KERALA

View Details

Round Size 70,Round Size 100,Frame- 2x1 - 140.5 X 121 X 60,Frame- 4x1 - 140.5 X 179.5 X 60,Frame- 6

Department of Defence Production

,

EMD: ₹2.0 L
View Details