Open Tender for Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including in KANCHIPURAM, TAMIL NADU
Bid Publish Date
03-Aug-2026, 3:32 pm
Bid End Date
21-Aug-2026, 11:00 am
EMD
₹2,38,972
Location
Progress
Nuclear Power Corporation Of India Limited invites bids for Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6 x software. , Item 2 Standard Phased Array Probe 5. 0 M Hz Linear Array 64 Elements 32 x 10 mm Total Active Aperture 0. 5 mm Pitch 10 mm Elevation A32 Case Type Impedance. , Item 3 Standard Wedge for Angle Beam Phased Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option, Item 4 Custom Wedge for Angle Beam Phased Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option. , Item 5 - Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit. , Item 6 - WeldSight Inspection software license key compatible with FocusP x and OmniScan X 3 series. Includes data acquisition and analysis functionalities and ES BeamTool license. , Item 7 Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. , Item 8 Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. , Item 9 STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0. 5MM PITCH 10MM ELEVATION. , Item 10 Adaptor box with 16 UT channels to connect Phased array instrument with omniscan connector in KANCHIPURAM, TAMIL NADU. Quantity: 10. Submission Deadline: 21-08-2026 11: 00: 00. Submit your proposal before the deadline.
Tender Data
Bid Details
Quantity
10
Category
Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6 x software.
Bid Type
Two Packet Bid
Bid Validity
120 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
7 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6 x software. , Item 2 Standard Phased Array Probe 5.0 M Hz Linear Array 64 Elements 32 x 10 mm Total Active Aperture 0.5 mm Pitch 10 mm Elevation A32 Case Type Impedance. , Item 3 Standard Wedge for Angle Beam Phased Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option , Item 4 Custom Wedge for Angle Beam Phased Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option. , Item 5 - Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit. , Item 6 - WeldSight Inspection software license key compatible with FocusP x and OmniScan X 3 series. Includes data acquisition and analysis functionalities and ES BeamTool license. , Item 7 Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. , Item 8 Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. , Item 9 STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0.5MM PITCH 10MM ELEVATION. , Item 10 Adaptor box with 16 UT channels to connect Phased array instrument with omniscan connector
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
19
Payment Timelines
Payments shall be made to the Seller within 10 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
150
Delivery Locations
1
Delivery Cities
Chengalpattu
Delivery Pincodes
603102
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Senthil Kumar | 603102,MADRAS ATOMIC POWER STATION, KALPAKKAM, CHENGALPATTU DISTRICT | Chengalpattu | Tamil Nadu | 603102 | 1 | 150 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 7
GeM-Bidding-9689314.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
10 Items Sign in to view GEM price trends Sign in for GEM prices
Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6 x software.
OmniScan X4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6.x software. Includes 2 LiIon batteries and 1 each of all following items - India Pakistan South Africa Hong Kong power cord DC charger rigid transport case calibration certificate spare screen protector USB key loaded with latest OmniPC 6.x software revision and user manuals and empty USB key for file transfer purposes.
Item 2 Standard Phased Array Probe 5.0 M Hz Linear Array 64 Elements 32 x 10 mm Total Active Aperture 0.5 mm Pitch 10 mm Elevation A32 Case Type Impedance.
Standard Phased Array Probe 5.0 M Hz Linear Array 64 Elements 32x10 mm Total Active Aperture 0.5 mm Pitch 10 mm Elevation A32 Case Type Impedance Matching to Rexolite PVC Sheathing 5 m Cable Length Omniscan Connector.
Item 3 Standard Wedge for Angle Beam Phased Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option
Standard Wedge for Angle Beam Phased-Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides.
Item 4 Custom Wedge for Angle Beam Phased Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option.
Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching 6 inches - 152.4 mm Circumferential Outside Diameter - COD - Pipe for inspection of Longitudinal Welds.
Item 5 - Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit.
Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit.
Item 6 - WeldSight Inspection software license key compatible with FocusP x and OmniScan X 3 series. Includes data acquisition and analysis functionalities and ES BeamTool license.
WeldSight Inspection software license key compatible with FocusPx and OmniScan X3 series. Includes data acquisition and analysis functionalities and ES BeamTool license. Comes with two hard USB keys WeldSight-I and ESBeamTool. DOES NOT include a dedicated analysis key. NO replacement keys are available if lost. This to be installed in the compatabile PC with High ram and SSD capacity.
Item 7 Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides.
Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching 6 inches - 152.4 mm Axial Outside Diameter - AOD - Pipe for inspection of Circumferential Welds.
Item 8 Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides.
Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave, with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching from 2.875 inches -73 mm to 3.5 inches - 88.9 mm Axial Outside Diameter AOD Pipe for inspection of Circumferential Welds. 39629
Item 9 STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0.5MM PITCH 10MM ELEVATION.
STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0.5MM PITCH 10MM ELEVATION.
Item 10 Adaptor box with 16 UT channels to connect Phased array instrument with omniscan connector
Adaptor box with 16UT channels to connect Phased array instrument with omniscan connector
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Item 1 - OmniScan X 4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6 x software. | OmniScan X4 32 -128PR Phased Array instrument with 32 pulsers and 128 receivers including 64-element TFM 2 UT P R channels loaded with the latest revision of MXU 6.x software. Includes 2 LiIon batteries and 1 each of all following items - India Pakistan South Africa Hong Kong power cord DC charger rigid transport case calibration certificate spare screen protector USB key loaded with latest OmniPC 6.x software revision and user manuals and empty USB key for file transfer purposes. | 1 | nos | maps_consignee2 | 150 | |
| 2 | Item 2 Standard Phased Array Probe 5.0 M Hz Linear Array 64 Elements 32 x 10 mm Total Active Aperture 0.5 mm Pitch 10 mm Elevation A32 Case Type Impedance. | Standard Phased Array Probe 5.0 M Hz Linear Array 64 Elements 32x10 mm Total Active Aperture 0.5 mm Pitch 10 mm Elevation A32 Case Type Impedance Matching to Rexolite PVC Sheathing 5 m Cable Length Omniscan Connector. | 1 | nos | maps_consignee2 | 150 | |
| 3 | Item 3 Standard Wedge for Angle Beam Phased Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option | Standard Wedge for Angle Beam Phased-Array Probe Type A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. | 1 | nos | maps_consignee2 | 150 | |
| 4 | Item 4 Custom Wedge for Angle Beam Phased Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option. | Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching 6 inches - 152.4 mm Circumferential Outside Diameter - COD - Pipe for inspection of Longitudinal Welds. | 1 | nos | maps_consignee2 | 150 | |
| 5 | Item 5 - Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit. | Mini encoder 5 m cable waterproof with Lemo connector for current generation of OmniScan and Focus instruments. Includes bracket kit. | 1 | nos | maps_consignee2 | 150 | |
| 6 | Item 6 - WeldSight Inspection software license key compatible with FocusP x and OmniScan X 3 series. Includes data acquisition and analysis functionalities and ES BeamTool license. | WeldSight Inspection software license key compatible with FocusPx and OmniScan X3 series. Includes data acquisition and analysis functionalities and ES BeamTool license. Comes with two hard USB keys WeldSight-I and ESBeamTool. DOES NOT include a dedicated analysis key. NO replacement keys are available if lost. This to be installed in the compatabile PC with High ram and SSD capacity. | 1 | nos | maps_consignee2 | 150 | |
| 7 | Item 7 Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. | Custom Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching 6 inches - 152.4 mm Axial Outside Diameter - AOD - Pipe for inspection of Circumferential Welds. | 1 | nos | maps_consignee2 | 150 | |
| 8 | Item 8 Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave with IHC option - Irrigation Holes and Carbides. | Standard Wedge for Angle Beam Phased-Array Probe A32 Normal scan 55 deg Refracted Angle in Steel Shear Wave, with IHC option - Irrigation Holes and Carbides. The wedge features a curvature matching from 2.875 inches -73 mm to 3.5 inches - 88.9 mm Axial Outside Diameter AOD Pipe for inspection of Circumferential Welds. 39629 | 1 | nos | maps_consignee2 | 150 | |
| 9 | Item 9 STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0.5MM PITCH 10MM ELEVATION. | STANDARD WEDGE FOR ANGLE BEAM PHASED ARRAY PROBE PROVIDED IN 5MHZ LINEAR ARRAY 64 ELEMENTS 32 X 10MM TOTAL ACTIVE APERTURE 0.5MM PITCH 10MM ELEVATION. | 1 | nos | maps_consignee2 | 150 | |
| 10 | Item 10 Adaptor box with 16 UT channels to connect Phased array instrument with omniscan connector | Adaptor box with 16UT channels to connect Phased array instrument with omniscan connector | 1 | nos | maps_consignee2 | 150 |
Categories
79
Corrigendum Updates
1 Update Update
Extended Deadline
21-Aug-2026, 5:30 am
Opening Date
21-Aug-2026, 6:00 am
Required Documents
OEM Authorization Certificate *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer