Tender Notice for workstation Specification Supplying & placing Single Sharing table in completely knock down conditions with an overall size 700 mm X 600mm X1200 m that is to be assembled at site The worktop shall be made up of 25mm thick pre-laminated particle board of grade ll of IS 12823 with approved laminate an finish as per approved shade The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut out of the size board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on 18 MM Thick Prelam Partical board gabel end with edges shall be sealed with 2mm thick thi strip of impermeable PVC thatis cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 dogroo Colsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The table shall be clad with modesty panel which provide structural support f fort the table. It should be 18 mm thick Prelam partical board with 2mm thick thin strip of impermeable PVC that is cut to fit the size of boar panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. CPU Stand on Bottom. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. Wire carrier shab be made i in 0.8mm Thick r metal sheet with 40 micrown powder coated size shall be of wire carrier W 670 XD 140 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015, ISO-45001:2018, ISO 50001:2018. BIFMA membership and AIOTA certification. Copy of E-W aste Agreement and Factory License. OEM should have Low chemical emissions certification from Green Guard as per UL 2818-2013 Standard fOT Morkstation Series. OEM should have AlOTA Certification for W orkstation. Bidder should submit valid Certification copy along with bid. in BIHAR

Supplying & Placing table in completely knock down conditions that is to be assembled at site. The construction of the main table shall be with minifix dowels, pins and MS brackets. The top shall be made up of 25mm thick pre-laminated particle board of grade II of IS 12823 with laminate finish The top profile shall be in C shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick Pre-laminated particle board and the profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between.

Office chair with Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience moulded polyurethane foam 40mm thick having density 45kg/m� with fabric tapestry 1mm thick and 300 GSM and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 30mm thick having density 45kg/m� with fabric tapestry 1mm thick and 300 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. The seat and back shall be individual with different plywood joint with HR steel sheet. The seat & back covered with polypropalene cover and the armrest shall be used PP arm completely joint with seat. The chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 450�10 mm(W)X435�10 mm(D) and back size shall be 440�10 mm(H) from seat & overall height = 890�10 mm.

Office Table with ERU & Pedestal of size 1350 X 750 X 750 mm + ERU + Pedestel Main Desk of size 1350 x 750 x 750 with ERU of size 1200 x 450 x 750 & 01 No. 3 Drawers Pedestal:- Top-panel made from 25 �0.5 mm THK Pre Laminated Boards as per IS-12823 with 2 mm Thick PVC beading on all sides. Side Panel-The panel is made from 18 �0.5 mm THK Pre Laminated Boards as per IS-12823 with 0.8 mm PVC beading on all sides. Modestty 1 & 2-The panel is made from 18 �0.5 mm THK Pre Laminated Boards as per IS-12823 with 0.8 mm Thick PVC beading on all edges. The panel is made from 25 �0.5 mm THK Pre Laminated Boards as per IS-12823 with 2 mm Thick PVC beading on all sides, The panel is made from 18 �0.5 mm THK Pre Laminated Boards as per IS-12823 with 0.8 mm PVC beading on all sides. The panel is made from 18 �0,5 mm THK Pre Laminated Boards as per IS-12823 with 0.8 mm Thick PVC beading on all edges. PEDESTAL WOODEN PANEL ( 1 BOX+ 1 FILLING) Back -Wooden panel is made from 18 �0.5 mm THK Pre Laminated Boards as per IS-12823 with PVC beading on all sides. The panel is made from 9 �0.5 mm THK Pre Laminated Board.

Steel Rack of size 6'x36"x18" with Six Shelves Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05 mm, Panel/Shelves: 6 Bnd bending process of 905L x 448D of load capacity 80 Kgs. UDL Max Per shelf. Shelf Material- 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513, Angle Posts Material and size-Rolled steel angle posts of 40 X 40 X 1.8 mm, M S Sheet Thickness of Shelves and Back (Minimum) in mm-0.8, Paint-Powder coated with Lead Free Paint.

Almirah with Glass Door size 916mm(W) x 486mm(D) x 1980mm #(H) # - Excluding Leveler, Construction & Material-? Welded construction, ? 0.7mm thk (�0.07mm) CRCA* for shelf,? 0.8mm thk (�0.08mm) High yield strength CRCA** for doors and back,? 0.9mm thk (�0.08mm) CRCA* for all other components,CRCA ?D? grade as per IS:513,CRCA ?D? grade high yield strength as per IS:513,Locking & handle-? Brass handle with ? Two way locking mechanism with shooting bolt, Shelves-? Height wise adjustable shelf mounting-? Uniformly Distributed Load Capacity per each full shelf is 40 Kg maximum, ? 4Nos. of adjustable full Shelf, ? Box file A4 size (85Wx345Hx285D) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm,? M10 screw type leveler with hex plastic base,finish-? Epoxy Powder coated to the thickness of 50 microns (+-10).

Lab Stool of circular type 30.0 +/- 0.5 cm and made up of 0.1+/- 0.012 cm thk CR Steel. It is welded to the understructure and black powder coated ( DFT 40-60 microns ). UNDERSTRUCTURE ASSEMBLY: The understructure is made of MS tube 2.2 +/- 0.03 cm x 0.16+/- 0.0128 cm thk MS ERW tube. lt is welded ti the MS fabricated circular seat assembly and black powder coated ( DFT 40-60 microns ). The understructure is provided with black PP injection moulded ferrules.

Computer Table of Size-600W x 450D x 750H mm Compact and easy to use . Top made-up of 1.5 cm Medium Density Fiber. All the other panels are made of Particle board. Vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels