Tender Notice for Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of 8 nos. Right(04 Nos.) & Left (04Nos. )Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, S.SPlates, bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.) in BIHAR
Bid Publish Date
18-Jan-2023, 10:03 am
Bid End Date
27-Jan-2023, 3:00 pm
EMD
₹27,50,000
Value
₹17,46,03,000
Location
Progress
Tender Type
Open
Tender Fee
₹10,000
Tender Fee Exemption
No
EMD Exemption
No
Category
ITMRATE
Categories
53
The issuing authority announces a tender for Design, drawing, fabrication, Supply, erection, Transportation, fitting, fixing, testing, and commissioning of Automatic gates Tentative size 4. 85m x 1. 2m (61 Nos. ) Under Sluice gates (04 Nos. Left & 04 Nos. Right) Tentative size 6. 590 m X 2. 450 m, 01 No. Right H. R Gate Tentative size 1. 740m x 1. 520m & 01 No. Left H. R Gate Tentative size 3. 620m x 1. 520m, Trestle, Hoist Bridge platform with railing & Ladders including their hoist Arrangement with 03 Years Annual Operation & Maintenance for Mandai Weir under Irrigation Mechanical Division Gaya. (GROUP-01) in BIHAR. Submission Deadline: 27-01-2023 15: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Processing Fee
₹5,900
Tender Currency
INR
Bid Currency
INR
Ranking Sequence
L1 Ranking
Estimated Value Visibility
N
Bid To RA
No
Authority & Contact
Organization Hierarchy
Government of Bihar->Water Resources Department->C.E. ( MECH.) PATNA->IRRIGATION MECHANICAL CIRCLE, GAYA, CAMP-DEHRI
Approving Authority
ASHOK KUMAR YADAV (SE)
Tender Creator
Mr ASHOK YADAV (SUPERINTENDENT ENGINEER)
Pre-Bid & Qualification
Pre-Bid Meeting Start
20-01-2023 15:00:00
Pre-Bid Meeting End
20-01-2023 16:00:00
Pre-Bid Discussion Type
OFFLINE
Pre-Bid Venue
Date: 20.01.2023 at 3.00 P.M. office of the Chief Engineer (Mechanical) Water Resources Department,
Payment Breakdown
| Type | Amount | Currency | Mode | Exemption |
|---|---|---|---|---|
| EMD | ₹27,50,000 | INR | Internet Payment Gateway(IPG),Challan|Bank Guarantee | No |
| Tender Fee | ₹10,000 | INR | Internet Payment Gateway(IPG),Challan| | No |
| Tender Processing Fee | ₹5,900 | INR | Internet Payment Gateway(IPG),Challan| | No |
Document Requirements
Bid Validity (Bids shall remain valid for a period not less than 120 days after the deadline date.)
Bid Security
(i) Legal Status of Bidder.
(ii) Place of Registration.
(iii) Principal place of Business
(iv) Power of attorney of signatory Bid
Total value of Mechanical engineering work performed in last five years. (2017-2018)
Total value of Mechanical engineering work performed in last five years. (2018-2019)
Total value of Mechanical engineering work performed in last five years. (2019-2020)
Total value of Mechanical engineering work performed in last five years. (2020-2021)
Total value of Mechanical engineering work performed in last five years. (2021-2022)
Work Experience of Similar nature
Minimum Quantities of work done as prime contractor in any one year during last five years.
Bidding Capacity:More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Va
(a) Existing commitments and ongoing works
(b) Work for which Bid already submitted
Availability of key items of Contractor's Equipment
Key Personnel
Evidence of accesses to Financial Resources
Proposed methodology and programme of construction.
Litigation History
Affidavit
Undertaking
Liquid Asset & Credit Facility( lac )
Joint Venture
Proposal of sub-Contract
Time of Completion
Registration No., Factory Licence No & Udyam Adhar No.
I.T. & GST Registration & clearance Certificate
Character Certificate
Labour License
Non assosiation with Departmental Officials
NOC for Debar (If required)
Additional document required as per mentioned in the SBD Document (If required)
General Particulars
Bid Validity (Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive)
Bid Security ((A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement.)/(B) Earnest Money can be paid through Internet Payment Gateway (Credit/Debit Card), Net Banking, NEFT/RTGS in online mode.
(i) Legal Status of Bidder.
(ii) Place of Registration.
(iii) Principal place of Business.
(iv) Power of attorney of signatory Bid.
Total value of Mechanical engineering work performed in last five years. (2017 - 2018)
Total value of Mechanical engineering work performed in last five years. (2018 - 2019)
Total value of Mechanical engineering work performed in last five years. (2019 - 2020)
Total value of Mechanical engineering work performed in last five years. (2020 - 2021)
Total value of Mechanical engineering work performed in last five years. (2021 - 2022)
Work Experience of Similar nature (Satisfactory completed atleast one similar work of value not less than 10% of estimated value of contract (Rs in Lakhs)
Minimum Quantities of work done as prime contractor in any one year during last five years. (Fabrication , Supply ,Erection Testing , Installation and Commisioning of Manually Operated Gates / Hydraulic Operated Hoist Gates / Automated Gates In Barrage/Dam/Weir/Canal Gates (Area of Gate As M2 ). 197
Bidding Capacity: (More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period (Rs in Lakhs)
(a) Existing commitments and ongoing works
(b) Work for which Bid already submitted.
Availability of key items of Contractor's Equipment D.G. Set- 40 KVA 2 Nos, Max Age 5
"Welding Set Semi automatic 400 Volt 600 Amp. Rectifier (D.C. Output)wire feeding mechanism & remote control." 4 nos, max age 5
Chain Pulley block of sufficient lift ? 10 tone nos. 4, max age 5
Concrete Mixer no. 1 max age 5
Drilling Machine nos. 2, max age 5
Key Personnel ("Project manager B.E. Mechanical+10year experience (5 years as manager) or retired E.E.") 1 no.
"Site Enginee B.E. Mechanical+7year experience (3 years of mechanical works) or retired A.E." 1 no.
"Site Supervisor Fresh B.E. (Mech.)/ Diploma (Mech. + 3 years Exp. Or Retired I.T.I. Holder" 2 nos.
Evidence of accesses to Financial Resources (Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (Not more than 3 months old). (Rs in Lakhs).
Proposed methodology and programme of construction.(Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. (Attached or not)
Litigation History. (Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not)
Affidavit (Affidavit should be submitted in the format as per the Annexure-3 of the Water Resources Department letter no. 536 dated 13.06.2013)
Undertaking (Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. (Rs in Lakhs)
Liquid Asset & Credit Facility( lac )
Joint Venture
Proposal of sub-Contract
Time of Completion
Registration No., Factory Licence No & Udyam Adhar No.
I.T. & GST Registration & clearance Certificate.
Character Certificate.
Labour License.
Non assosiation with Departmental Officials.
NOC for Debar (If required)
Tender Terms
Section 1
SBD DOCcument MANDAI WEIR.pdfDetailsACCEPTED ALL TERMS AND CONDITIONS AS PER MENTIONED SBD DOCUMENT
Section 1
SBD DOCcument MANDAI WEIR.pdfDetailsACCEPTED ALL TERMS AND CONDITIONS AS PER MENTIONED SBD DOCUMENT
ACCEPTED ALL TERMS AND CONDITIONS AS PER MENTIONED SBD DOCUMENT
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
SBD DOCcument MANDAI WEIR.pdf
GENERAL_DOCUMENT
Mandai weir TECHNICAL SHEET.xlsx
GENERAL_DOCUMENT
Mandai BOQ N.I.Q. 01-SBD-2022-23.xlsx
BOQ
CORRIGENDUM Lt. 52, dtd. 18-01-2023.pdf
CORRIGENDUM
Bill of Quantities (BOQ)
34 Items Sign in to view GEM price trends Sign in for GEM prices
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of 8 nos. Right(04 Nos.) & Left (04Nos. )Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, S.SPlates, bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.)
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of 8 nos. Right(04 Nos.) & Left (04Nos. )Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, S.SPlates, bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.)
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( Tentative size 6590 x 2450 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( Tentative size 6590 x 2450 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing Fabrication , Erection, Commissioning & Testing of trestle with structural steel hoist bridge platform with railing (4 nos. each side of weir) consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.
Design, drawing Fabrication , Erection, Commissioning & Testing of trestle with structural steel hoist bridge platform with railing (4 nos. each side of weir) consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition.
Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Right H/R gate consisting of embedded parts such as Side seal,roller track,guide, top and bottom seal seat ,S.S Plate with base for vertical type gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Right H/R gate consisting of embedded parts such as Side seal,roller track,guide, top and bottom seal seat ,S.S Plate with base for vertical type gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of vertical type Right H/R Gate ( Tentative size 1740 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, rubber seals (Top, Bottom & Side ),Roller,guid shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of vertical type Right H/R Gate ( Tentative size 1740 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, rubber seals (Top, Bottom & Side ),Roller,guid shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Right H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map..
Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Right H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map..
Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Left H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track,S.S plate, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Left H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track,S.S plate, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( Tentative size 3620 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( Tentative size 3620 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Left H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Left H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of Left H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I (Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of Left H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I (Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.
Design, drawing, Fabrication, erection, supply, commissioning & testing of 4 nos. of structural steel ladder consisting of main beams, cross beams, stiffeners, chequered plate covering, hand railing etc., with all other accessories, for the hoist bridge of Left H/R, Right H/R, Left U/S & Right U/S , at Mandai Weir site including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc chromate red oxide primer and three coats of synthetic enamel paint etc. complete job as per specification and direction of E/I
Design, drawing, Fabrication, erection, supply, commissioning & testing of 4 nos. of structural steel ladder consisting of main beams, cross beams, stiffeners, chequered plate covering, hand railing etc., with all other accessories, for the hoist bridge of Left H/R, Right H/R, Left U/S & Right U/S , at Mandai Weir site including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc chromate red oxide primer and three coats of synthetic enamel paint etc. complete job as per specification and direction of E/I
Provision for Technical /Skill/Helper etc. man power for General maintenance (Oiling ,Greasing ,Cadmium compounding ) as well as Repair of Weir Gates (U/S & H/R Gates), their Hoisting system & other incidental unseen items in general Season as well as in Flood Season for three years in three shifts around the clock for Smooth Running & Operation of Weir Under Defect Liability Period as per direction of E/I.
Provision for Technical /Skill/Helper etc. man power for General maintenance (Oiling ,Greasing ,Cadmium compounding ) as well as Repair of Weir Gates (U/S & H/R Gates), their Hoisting system & other incidental unseen items in general Season as well as in Flood Season for three years in three shifts around the clock for Smooth Running & Operation of Weir Under Defect Liability Period as per direction of E/I.
(l) For First Year In General Season (In Three shift + General shift)
(l) For First Year In General Season (In Three shift + General shift)
(ll) For Second Year In General Season (In Three shift + General shift)
(ll) For Second Year In General Season (In Three shift + General shift)
(ll) For Third Year In General Season (In Three shift + General shift)
(ll) For Third Year In General Season (In Three shift + General shift)
Provision Material Required for maintenance of Weir gates U/S & H.R. Gate (08 + 02) by Greasing & Oiling of Roller, Reduction Gear Unit of Hoisting system etc. & applying cadmium compound to Rope Drum system one time during the year but oiling ,greasing work will be done two times in a year Under Defect Liability Period with cost of all labour of materials as per specification and direction of E/I.
Provision Material Required for maintenance of Weir gates U/S & H.R. Gate (08 + 02) by Greasing & Oiling of Roller, Reduction Gear Unit of Hoisting system etc. & applying cadmium compound to Rope Drum system one time during the year but oiling ,greasing work will be done two times in a year Under Defect Liability Period with cost of all labour of materials as per specification and direction of E/I.
During Kharif & Rabbi irrigation Season for 1st Year
During Kharif & Rabbi irrigation Season for 1st Year
During Kharif & Rabbi irrigation Season for 2nd Year
During Kharif & Rabbi irrigation Season for 2nd Year
During Kharif & Rabbit irrigation Season for 3rdYear
During Kharif & Rabbit irrigation Season for 3rdYear
Design ,Fabrication , Supply , Transportation at Site of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates ,bronze bush ,stainless steel axles and nut, bolts ,rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work.
Design ,Fabrication , Supply , Transportation at Site of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates ,bronze bush ,stainless steel axles and nut, bolts ,rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work.
Erection, Testing and Commissioning of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates, bronze bush, stainless steel axles and nut, bolts, rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work.
Erection, Testing and Commissioning of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates, bronze bush, stainless steel axles and nut, bolts, rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work.
Design, Fabrication, Supply, transportation at site of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge.
Design, Fabrication, Supply, transportation at site of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge.
Erection, testing & commissioning of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge.
Erection, testing & commissioning of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge.
Design, Fabrication, supply, transportation at site of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Design, Fabrication, supply, transportation at site of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Erection, testing & commissioning of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Erection, testing & commissioning of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Design, Manufacture, Supply, transportation to site of 6 set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Design, Manufacture, Supply, transportation to site of 6 set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Erection, testing & commissioning of 6set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Erection, testing & commissioning of 6set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Providing Operation and Maintenance with Security of Complete System for 36 months (3 Years) round the clock including spares on Free of Cost Basis Complete job as per requirement and direction of E/I.
Providing Operation and Maintenance with Security of Complete System for 36 months (3 Years) round the clock including spares on Free of Cost Basis Complete job as per requirement and direction of E/I.
Providing Oiling ,Greasing and General Maintenance of Complete System for 36 months (3 Years).
Providing Oiling ,Greasing and General Maintenance of Complete System for 36 months (3 Years).
Provision for cost of Groove cutting/Concrete breaking in P:C:C/R:C:C by mech instrument or manually for proper anchoring of embeded bottom seal beam etc.all cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Provision for cost of Groove cutting/Concrete breaking in P:C:C/R:C:C by mech instrument or manually for proper anchoring of embeded bottom seal beam etc.all cost of all materials with all leads & lifts as directed by the Engineer in Charge.
Providing and laying in Situ M20 Cement concrete in bottom and side groove of gate , including centering and shuttering from work including machine,mixing, laying,vibrating, curing with all leads and lifts, loading and unloading including the cost of all materials equipment, labour etc complete as per specifications and direction of Engineer in charge for CC 1:1.5:3 (M20).
Providing and laying in Situ M20 Cement concrete in bottom and side groove of gate , including centering and shuttering from work including machine,mixing, laying,vibrating, curing with all leads and lifts, loading and unloading including the cost of all materials equipment, labour etc complete as per specifications and direction of Engineer in charge for CC 1:1.5:3 (M20).
Drilling of holes of required size for installation of Anchor Bolts/Bars by usage of suitable template and Supply & fixing of Anchor bolts/bars accurately by usage of suitable template and using cementotious bonding material & it includes all lead & lift etc., as directed by Engineer-in-charge.
Drilling of holes of required size for installation of Anchor Bolts/Bars by usage of suitable template and Supply & fixing of Anchor bolts/bars accurately by usage of suitable template and using cementotious bonding material & it includes all lead & lift etc., as directed by Engineer-in-charge.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Mandatory | Price Trends |
|---|---|---|---|---|---|---|---|---|
| 1 | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of 8 nos. Right(04 Nos.) & Left (04Nos. )Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, S.SPlates, bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.) | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of 8 nos. Right(04 Nos.) & Left (04Nos. )Under sluice gate consisting of embedded parts such as side sill beam, wheel track, guide track, S.SPlates, bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.) | 8 | each | - | - | Yes | |
| 2 | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( Tentative size 6590 x 2450 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift Under sluice Gate ( Tentative size 6590 x 2450 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 8 | each | - | - | Yes | |
| 3 | Design, drawing Fabrication , Erection, Commissioning & Testing of trestle with structural steel hoist bridge platform with railing (4 nos. each side of weir) consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition. | Design, drawing Fabrication , Erection, Commissioning & Testing of trestle with structural steel hoist bridge platform with railing (4 nos. each side of weir) consisting of main beams, cross beams, stiffeners chequired plate, covering hand railing etc with all other accessories for supporting hoist system for operating Under sluice gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition. | 8 | each | - | - | Yes | |
| 4 | Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, commissioning of double rope drum system with gear, pinion, plumber block etc of adequate capacity for operation of Under sluice gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 8 | each | - | - | Yes | |
| 5 | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Right H/R gate consisting of embedded parts such as Side seal,roller track,guide, top and bottom seal seat ,S.S Plate with base for vertical type gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Right H/R gate consisting of embedded parts such as Side seal,roller track,guide, top and bottom seal seat ,S.S Plate with base for vertical type gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 6 | Design, drawing, Fabrication, supply erection, testing and commissioning of vertical type Right H/R Gate ( Tentative size 1740 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, rubber seals (Top, Bottom & Side ),Roller,guid shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of vertical type Right H/R Gate ( Tentative size 1740 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, rubber seals (Top, Bottom & Side ),Roller,guid shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 7 | Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Right H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.. | Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Right H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one cost of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map.. | 1 | each | - | - | Yes | |
| 8 | Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of right H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 9 | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Left H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track,S.S plate, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of second stage embedded parts of Left H/R gate consisting of embedded parts such as side sill beam, wheel track, guide track,S.S plate, top and bottom seal seat with base for vertical lift fixed wheel gate and concreting including all costs of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design is to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 10 | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( Tentative size 3620 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, Fabrication, supply erection, testing and commissioning of fixed wheel type vertical lift H/R Gate ( Tentative size 3620 x 1520 mm) consisting of skin plate, horizontal and vertical girder, stiffeners, wheel, bearing, wheel pin, retainer, rubber seal, guide shoe etc. with all cost of materials, machinery labour, cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of gate to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 11 | Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Left H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing & fabrication supply commissioning & testing of 1 nos. structural steel hoist bridge consisting of main beams, cross beams, stiffeners chequered plate, covering hand railing etc with all other accessories for supporting hoist system for operating Left H/R gates with all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I(Design of hoist bridge to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 12 | Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of Left H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I (Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | Design, drawing, commissioning of adequate capacity of lifting system by bevel gear & screw spindle for operation of Left H/R gate with all accessories including all cost of materials, machinery labour, all complete job and cutting aligning, welding finishing, cleaning, applying, one coat of zinc epoxy primer and three coats of cold applied epoxy paint complete job as per specification and direction of E/I (Design of hoisting arrangement to be done on the hydraulic particulars, drawing of civil structure and present site condition and map. | 1 | each | - | - | Yes | |
| 13 | Design, drawing, Fabrication, erection, supply, commissioning & testing of 4 nos. of structural steel ladder consisting of main beams, cross beams, stiffeners, chequered plate covering, hand railing etc., with all other accessories, for the hoist bridge of Left H/R, Right H/R, Left U/S & Right U/S , at Mandai Weir site including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc chromate red oxide primer and three coats of synthetic enamel paint etc. complete job as per specification and direction of E/I | Design, drawing, Fabrication, erection, supply, commissioning & testing of 4 nos. of structural steel ladder consisting of main beams, cross beams, stiffeners, chequered plate covering, hand railing etc., with all other accessories, for the hoist bridge of Left H/R, Right H/R, Left U/S & Right U/S , at Mandai Weir site including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc chromate red oxide primer and three coats of synthetic enamel paint etc. complete job as per specification and direction of E/I | 4 | each | - | - | Yes | |
| 14 | Provision for Technical /Skill/Helper etc. man power for General maintenance (Oiling ,Greasing ,Cadmium compounding ) as well as Repair of Weir Gates (U/S & H/R Gates), their Hoisting system & other incidental unseen items in general Season as well as in Flood Season for three years in three shifts around the clock for Smooth Running & Operation of Weir Under Defect Liability Period as per direction of E/I. | Provision for Technical /Skill/Helper etc. man power for General maintenance (Oiling ,Greasing ,Cadmium compounding ) as well as Repair of Weir Gates (U/S & H/R Gates), their Hoisting system & other incidental unseen items in general Season as well as in Flood Season for three years in three shifts around the clock for Smooth Running & Operation of Weir Under Defect Liability Period as per direction of E/I. | - | - | - | - | No | |
| (I) | (l) For First Year In General Season (In Three shift + General shift) | (l) For First Year In General Season (In Three shift + General shift) | 12 | each | - | - | Yes | |
| (II) | (ll) For Second Year In General Season (In Three shift + General shift) | (ll) For Second Year In General Season (In Three shift + General shift) | 12 | each | - | - | Yes | |
| (III) | (ll) For Third Year In General Season (In Three shift + General shift) | (ll) For Third Year In General Season (In Three shift + General shift) | 12 | each | - | - | Yes | |
| 15 | Provision Material Required for maintenance of Weir gates U/S & H.R. Gate (08 + 02) by Greasing & Oiling of Roller, Reduction Gear Unit of Hoisting system etc. & applying cadmium compound to Rope Drum system one time during the year but oiling ,greasing work will be done two times in a year Under Defect Liability Period with cost of all labour of materials as per specification and direction of E/I. | Provision Material Required for maintenance of Weir gates U/S & H.R. Gate (08 + 02) by Greasing & Oiling of Roller, Reduction Gear Unit of Hoisting system etc. & applying cadmium compound to Rope Drum system one time during the year but oiling ,greasing work will be done two times in a year Under Defect Liability Period with cost of all labour of materials as per specification and direction of E/I. | - | - | - | - | No | |
| 15(I) | During Kharif & Rabbi irrigation Season for 1st Year | During Kharif & Rabbi irrigation Season for 1st Year | 1 | each | - | - | Yes | |
| 15(II) | During Kharif & Rabbi irrigation Season for 2nd Year | During Kharif & Rabbi irrigation Season for 2nd Year | 1 | each | - | - | Yes | |
| 15(III) | During Kharif & Rabbit irrigation Season for 3rdYear | During Kharif & Rabbit irrigation Season for 3rdYear | 1 | each | - | - | Yes | |
| 16 | Design ,Fabrication , Supply , Transportation at Site of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates ,bronze bush ,stainless steel axles and nut, bolts ,rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work. | Design ,Fabrication , Supply , Transportation at Site of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates ,bronze bush ,stainless steel axles and nut, bolts ,rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work. | 61 | each | - | - | Yes | |
| 17 | Erection, Testing and Commissioning of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates, bronze bush, stainless steel axles and nut, bolts, rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work. | Erection, Testing and Commissioning of Gate leaf with Portal frame including embedded parts for 61 Nos. of 4.85 m x 1.2 m size (Tentative) automatic gates including fulcrum assemblies, gate leaf, end girders, hoisting brackets, steel track plates, bronze bush, stainless steel axles and nut, bolts, rubber seal etc complete including cost of all materials with all leads and lifts and as directed by Engineer-in-charge of work. | 61 | each | - | - | Yes | |
| 18 | Design, Fabrication, Supply, transportation at site of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge. | Design, Fabrication, Supply, transportation at site of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge. | 61 | each | - | - | Yes | |
| 19 | Erection, testing & commissioning of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge. | Erection, testing & commissioning of Steel Service Bridge with GI pipe railing for of 4.85m x 1.2m size (Tentative) automatic gates Including cost of all materials, etc. complete as directed by Engineer-in-charge. | 61 | each | - | - | Yes | |
| 20 | Design, Fabrication, supply, transportation at site of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | Design, Fabrication, supply, transportation at site of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | 122 | each | - | - | Yes | |
| 21 | Erection, testing & commissioning of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | Erection, testing & commissioning of Low Level Friction Damper for 122 Nos. of 4.85m x 1.2m size (Tentative) automatic Gates including Lever Arm, Box for shoe, friction track, disc spring, damper etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | 122 | each | - | - | Yes | |
| 22 | Design, Manufacture, Supply, transportation to site of 6 set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | Design, Manufacture, Supply, transportation to site of 6 set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | 6 | each | - | - | Yes | |
| 23 | Erection, testing & commissioning of 6set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | Erection, testing & commissioning of 6set of Portable Emergency Hydraulic Hoisting System for automatic Gates consisting of Hydraulic cylinder pump, hoses etc. complete including cost of all materials with all leads & lifts as directed by the Engineer in Charge. | 6 | each | - | - | Yes | |
| 24 | Providing Operation and Maintenance with Security of Complete System for 36 months (3 Years) round the clock including spares on Free of Cost Basis Complete job as per requirement and direction of E/I. | Providing Operation and Maintenance with Security of Complete System for 36 months (3 Years) round the clock including spares on Free of Cost Basis Complete job as per requirement and direction of E/I. | 3 | Per Year | - | - | Yes | |
| 25 | Providing Oiling ,Greasing and General Maintenance of Complete System for 36 months (3 Years). | Providing Oiling ,Greasing and General Maintenance of Complete System for 36 months (3 Years). | 3 | Per Year | - | - | Yes | |
| 26 | Provision for cost of Groove cutting/Concrete breaking in P:C:C/R:C:C by mech instrument or manually for proper anchoring of embeded bottom seal beam etc.all cost of all materials with all leads & lifts as directed by the Engineer in Charge. | Provision for cost of Groove cutting/Concrete breaking in P:C:C/R:C:C by mech instrument or manually for proper anchoring of embeded bottom seal beam etc.all cost of all materials with all leads & lifts as directed by the Engineer in Charge. | 200 | CUM | - | - | Yes | |
| 27 | Providing and laying in Situ M20 Cement concrete in bottom and side groove of gate , including centering and shuttering from work including machine,mixing, laying,vibrating, curing with all leads and lifts, loading and unloading including the cost of all materials equipment, labour etc complete as per specifications and direction of Engineer in charge for CC 1:1.5:3 (M20). | Providing and laying in Situ M20 Cement concrete in bottom and side groove of gate , including centering and shuttering from work including machine,mixing, laying,vibrating, curing with all leads and lifts, loading and unloading including the cost of all materials equipment, labour etc complete as per specifications and direction of Engineer in charge for CC 1:1.5:3 (M20). | 200 | CUM | - | - | Yes | |
| 28 | Drilling of holes of required size for installation of Anchor Bolts/Bars by usage of suitable template and Supply & fixing of Anchor bolts/bars accurately by usage of suitable template and using cementotious bonding material & it includes all lead & lift etc., as directed by Engineer-in-charge. | Drilling of holes of required size for installation of Anchor Bolts/Bars by usage of suitable template and Supply & fixing of Anchor bolts/bars accurately by usage of suitable template and using cementotious bonding material & it includes all lead & lift etc., as directed by Engineer-in-charge. | 61 | each | - | - | Yes |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 4
SBD DOCcument MANDAI WEIR.pdf
GENERAL_DOCUMENT
Mandai weir TECHNICAL SHEET.xlsx
GENERAL_DOCUMENT
Mandai BOQ N.I.Q. 01-SBD-2022-23.xlsx
BOQ
CORRIGENDUM Lt. 52, dtd. 18-01-2023.pdf
CORRIGENDUM