Open Tender for SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN in NADIA, WEST BENGAL
Bid Publish Date
14-Feb-2025, 4:48 pm
Bid End Date
07-Mar-2025, 5:00 pm
EMD
₹20,000
Location
Progress
Quantity
95285
Category
SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm
Bid Type
Two Packet Bid
Categories
9
Andrew Yule And Company Limited announces a tender for SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm, SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm, Each side Bearing Collar Rate 81 to 150KG If Applicable, SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2, Each side Bearing Collar Rate 151 to 300 KG If Applicable, SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4. 5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4, Each side Bearing Collar Rate 301 to 1000 KG If Applicable, SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4. 5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6, Each side Bearing Collar Rate 1001 to 1500 KG If Applicable, INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA in NADIA, WEST BENGAL. Quantity: 95285. Submission Deadline: 07-03-2025 17: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm , SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm , Each side Bearing Collar Rate 81 to 150KG If Applicable , SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2 , Each side Bearing Collar Rate 151 to 300 KG If Applicable , SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4.5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4 , Each side Bearing Collar Rate 301 to 1000 KG If Applicable , SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4 .5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6 , Each side Bearing Collar Rate 1001 to 1500 KG If Applicable , INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-7526714.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
10 Items Sign in to view GEM price trends Sign in for GEM prices
SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm
SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm
SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm
SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm
Each side Bearing Collar Rate 81 to 150KG If Applicable
Each side Bearing Collar Rate 81 to 150KG If Applicable
SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2
SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2
Each side Bearing Collar Rate 151 to 300 KG If Applicable
Each side Bearing Collar Rate 151 to 300 KG If Applicable
SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4.5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4
SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4.5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4
Each side Bearing Collar Rate 301 to 1000 KG If Applicable
Each side Bearing Collar Rate 301 to 1000 KG If Applicable
SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4 .5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6
SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4 .5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6
Each side Bearing Collar Rate 1001 to 1500 KG If Applicable
Each side Bearing Collar Rate 1001 to 1500 KG If Applicable
INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA
INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm | SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm | 70 | pieces | ujjwalbose@1234 | 365 | |
| 2 | SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm | SHAFT MACHINING AS PER DRG FINISH WT FROM 81 to150 KG Length Up to 3000 mm | 80 | pieces | ujjwalbose@1234 | 365 | |
| 3 | Each side Bearing Collar Rate 81 to 150KG If Applicable | Each side Bearing Collar Rate 81 to 150KG If Applicable | 5 | pieces | ujjwalbose@1234 | 365 | |
| 4 | SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2 | SHAFT MACHINING AS PER DRG FINISH WT FROM 151 to 300 KG Minimum Rate As per SL No 2 | 20,000 | kg | ujjwalbose@1234 | 365 | |
| 5 | Each side Bearing Collar Rate 151 to 300 KG If Applicable | Each side Bearing Collar Rate 151 to 300 KG If Applicable | 10 | pieces | ujjwalbose@1234 | 365 | |
| 6 | SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4.5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4 | SHAFT MACHINING AS PER DRG FINISH WT FROM 301 to 1000KG upto 4.5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 4 | 25,000 | kg | ujjwalbose@1234 | 365 | |
| 7 | Each side Bearing Collar Rate 301 to 1000 KG If Applicable | Each side Bearing Collar Rate 301 to 1000 KG If Applicable | 10 | pieces | ujjwalbose@1234 | 365 | |
| 8 | SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4 .5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6 | SHAFT MACHINING AS PER DRG FINISH WT FROM 1001 to 1500 kg upto 4 .5 mtr Lg Minimum Rate equal to Maximum Rate of SL No 6 | 50,000 | kg | ujjwalbose@1234 | 365 | |
| 9 | Each side Bearing Collar Rate 1001 to 1500 KG If Applicable | Each side Bearing Collar Rate 1001 to 1500 KG If Applicable | 10 | pieces | ujjwalbose@1234 | 365 | |
| 10 | INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA | INTEGRAL FLANGE SHAFT DRILL COST of Flange UPTO 36 MM FLANGE OUTER DIA UPTO 800 MM DIA | 100 | pieces | ujjwalbose@1234 | 365 |
Required Documents
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | ESDEE ELECTROMILL PVT LTD Under PMA | - | 01-03-2025 12:31:09 | |
| 2 | G. S. ENTERPRISE Under PMA | - | 19-02-2025 12:48:28 | |
| 3 | KARAR & CO Under PMA | - | 07-03-2025 11:24:44 | |
| 4 | NS ENGINEERING CORPORATION Under PMA | - | 22-02-2025 12:08:55 | |
| 5 | PAUL ENGINEERING WORKS Under PMA | - | 19-02-2025 11:36:11 | |
| 6 | SHREE DURGA ENGINEERING WORKS Under PMA | - | 23-02-2025 11:37:02 | |
| 7 | SINGHA ENGINEERING WORKS Under PMA | - | 19-02-2025 13:31:35 | |
| 8 | ZYGONIC VENTURES Under PMA | - | 05-03-2025 07:59:06 |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | SINGHA ENGINEERING WORKS(MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L2 | PAUL ENGINEERING WORKS (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L3 | ZYGONIC VENTURES (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L4 | KARAR & CO (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L5 | NS ENGINEERING CORPORATION (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L6 | G. S. ENTERPRISE (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L7 | ESDEE ELECTROMILL PVT LTD (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN | |
| L8 | SHREE DURGA ENGINEERING WORKS (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : SHAFT MACHINING AS PER DRG FINISH WT UPTO 80 KG Length up to 1400 mm,SHAFT MACHINING AS PER DRG FIN |
Frequently Asked Questions
Key insights about WEST BENGAL tender market
What are the eligibility requirements for participation in this tender?
The eligibility requirements include that bidders need to be a registered entity and possess necessary credentials. Additionally, they should provide a certificate as requested in the Additional Terms and Conditions (ATC). If a bidder is seeking an exemption from specified experience or turnover criteria, supporting documentation must be provided for evaluation.
What technical specifications and quality standards must bidders adhere to?
Contractors must ensure that all work aligns with the technical specifications stipulated in the tender documentation. The quality standards require precision machining and adherence to dimensions outlined, ensuring the final products meet industry benchmarks for durability and performance.
What are the payment terms and performance security requirements?
Bidders must comply with specific payment terms as defined in the tender documentation. Additionally, there is a requirement to furnish a performance security, guaranteeing the capacity to fulfill the contractual responsibilities. This measure ensures accountability and reliability from the selected contractor.
How should bids be submitted, and what key timelines should be noted?
Bids must be submitted through the official portal in the prescribed format, including all required documents. All key timelines, including bid submission and opening deadlines, will be detailed within the primary tender documents, which bidders should check regularly to ensure compliance.
What benefits are provided to Micro, Small, and Medium Enterprises (MSEs)?
This tender contains special provisions designed to support Micro, Small, and Medium Enterprises (MSEs), offering them a platform to participate effectively. These benefits might include preferential treatment during evaluations, financial assistance, or lower eligibility criteria, encouraging local enterprises to engage in governmental contracts.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-7526714.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS