TenderDekho Logo
Closed GEM

Indian Army Cable Tape Tender Wardha Maharashtra 2026 IS 7809 Part 1 Compliant Tape Specifications

Bid Publish Date

02-Mar-2026, 10:27 am

Bid End Date

12-Mar-2026, 11:00 am

Progress

RA
Issue02-Mar-2026, 10:27 am
Reverse AuctionCompleted
AwardCompleted
Explore all 4 tabs to view complete tender details

Quantity

7687

Category

MNX Power Contacor 3 Pole of capacity 80 or 100 Amp confirms to IS

Bid Type

Two Packet Bid

Categories 65

Tender Overview

Indian Army Department of Military Affairs invites bids for supply of cable tape per IS 7809 (Part 1) standards, for execution in Wardha, Maharashtra. Estimated scope references 46 BOQ items, with delivery terms and brand approval via MES. Key differentiator is strict adherence to governing specifications and the option clause allowing up to 25% quantity variation at contracted rates. The procurement focuses on raw insulation tape used in electrical cables, with exact tape length per roll, width in mm, and thickness tolerances defined in the specification. This tender mandates complete bid compliance and supplier capability to meet specified standards.

Technical Specifications & Requirements

  • Governing Specification: IS 7809 (Part 1) governing tape construction and tolerances
  • Length of tape in a roll: specified in metres (value not disclosed in data)
  • Width of tape: in mm with tolerance per clause 6.2.1 of IS 7809 (Part 1)
  • Thickness: ±0.025 mm tolerance
  • Conductor related categories: generic cable classifications, conductor material/form, nominal cross sectional area (Sq mm)
  • Insulation type and sheath: specified under generic cable categories; no numeric values provided
  • BOQ: 46 items listed, though individual quantities/units are not disclosed in the data
  • Brand/OEM note: Bidder’s brand must be approved in MES by competent authority

Terms, Conditions & Eligibility

  • Delivery flexibility: quantity may vary up to 25% at contract stage; extended delivery time calculations apply, with minimum 30 days
  • Scope: Bid price must include all cost components for supply of goods only
  • ATC requirement: Brand approval in MES; no explicit delivery schedule provided in data; bidders should verify final delivery terms
  • Documentation: compliance with MES brand approval and IS 7809 (Part 1) specification alignment is mandatory
  • Disclaimer: Data lacks explicit EMD, exact bid quantities, and defined start/end dates; bidders must seek clarifications while preparing bid

Key Specifications

  • IS 7809 (Part 1) compliant tape specifications

  • Length of tape per roll (metre) - exact value not provided

  • Width of tape in millimetres with Clause 6.2.1 tolerance

  • Thickness tolerance ±0.025 mm

  • Conductor category: nominal cross sectional area in sq mm (where applicable)

  • Insulation type and sheath classification as per generic cable categories

  • Brand/OEM approval requirement by MES authority

Terms & Conditions

  • 25% quantity variation right during contract

  • Bid price must cover all supply costs

  • Brand approval in MES required for bidder's offered product

Important Clauses

Payment Terms

Not specified in data; bidders should confirm in final bid documentation

Delivery Schedule

Delivery period tied to option clause; exact schedule to be clarified with issuing authority

Penalties/Liquidated Damages

Not detailed in provided data; bidders must review full terms for LD provisions

Bidder Eligibility

  • Proven experience in supplying electrical insulation tapes or similar cables

  • Must hold MES brand approval or obtain such approval for offered products

  • Demonstrate financial capacity to support a 25% quantity variation

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

No

Bid To RA Enabled

Yes

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 9

GeM-Bidding-9063692.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 46 Items Sign in for GEM prices

#1

Service wire 1100 volts grade heavy duty cable PVC insulated aluminium conductor 2.5 sqmm 2 core served with inner sheathing of PVC tape and overall PVC sheathed in service connections

Service wire 1100 volts grade heavy duty cable PVC insulated aluminium conductor 2.5 sqmm 2 core served with inner sheathing of PVC tape and overall PVC sheathed in service connections

500 rm Delivery: 30 days
#2

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 6 sqmm 2 core

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 6 sqmm 2 core

800 rm Delivery: 30 days
#3

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 10 sqmm 2 core

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 10 sqmm 2 core

800 rm Delivery: 30 days
#4

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 10 sqmm 4 core

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 10 sqmm 4 core

300 rm Delivery: 30 days
#5

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 16 sqmm 4 core

Service wire 1100 Volts grade Aluminium conductor PVC insulated round sheathed flexible industrial cable 16 sqmm 4 core

200 rm Delivery: 30 days
#6

DO Fuse Tinned Copper wire 14 SWG 200 gm roll

DO Fuse Tinned Copper wire 14 SWG 200 gm roll

12 pieces Delivery: 30 days
#7

DO Fuse Copper wire 18 SWG 200 gm roll

DO Fuse Copper wire 18 SWG 200 gm roll

10 pieces Delivery: 30 days
#8

DO Fuse Copper wire 20 SWG 200 gm roll

DO Fuse Copper wire 20 SWG 200 gm roll

8 pieces Delivery: 30 days
#9

DO Fuse Copper wire 21 SWG 200 gm roll

DO Fuse Copper wire 21 SWG 200 gm roll

10 pieces Delivery: 30 days
#10

HT Insulation Tape 19mmx18 point 3 mtr

HT Insulation Tape 19mmx18 point 3 mtr

40 pieces Delivery: 30 days
#11

LT Aluminium Terminal Lugs suitable for cable size 16 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 16 Sqmm

150 pieces Delivery: 30 days
#12

LT Aluminium Terminal Lugs suitable for cable size 25 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 25 Sqmm

150 pieces Delivery: 30 days
#13

LT Aluminium Terminal Lugs suitable for cable size 35 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 35 Sqmm

150 pieces Delivery: 30 days
#14

LT Aluminium Terminal Lugs suitable for cable size 50 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 50 Sqmm

150 pieces Delivery: 30 days
#15

LT Aluminium Terminal Lugs suitable for cable size 70 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 70 Sqmm

40 pieces Delivery: 30 days
#16

LT Aluminium Terminal Lugs suitable for cable size 95 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 95 Sqmm

40 pieces Delivery: 30 days
#17

LT Aluminium Terminal Lugs suitable for cable size 120 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 120 Sqmm

50 pieces Delivery: 30 days
#18

LT Aluminium Terminal Lugs suitable for cable size 150 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 150 Sqmm

40 pieces Delivery: 30 days
#19

LT Aluminium Terminal Lugs suitable for cable size 185 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 185 Sqmm

40 pieces Delivery: 30 days
#20

LT Aluminium Terminal Lugs suitable for cable size 240 Sqmm

LT Aluminium Terminal Lugs suitable for cable size 240 Sqmm

50 pieces Delivery: 30 days
#21

Stainless steel MCCB Enclosures for 4 pole MCCBs inbuilt neutral link for TPN Systems mounting holes IP 30 for upto 250 A MCCB 36 KA Cat No DU100D-250D of Lauritz Knudsen

Stainless steel MCCB Enclosures for 4 pole MCCBs inbuilt neutral link for TPN Systems mounting holes IP 30 for upto 250 A MCCB 36 KA Cat No DU100D-250D of Lauritz Knudsen

4 pieces Delivery: 30 days
#22

MNX Power Contacor 3 Pole of capacity 80 or 100 Amp confirms to IS

MNX Power Contacor 3 Pole of capacity 80 or 100 Amp confirms to IS

2 pieces Delivery: 30 days
#23

MCX 12 Power Contacor 4 Pole of capacity 63 Amp confirms to IS

MCX 12 Power Contacor 4 Pole of capacity 63 Amp confirms to IS

6 pieces Delivery: 30 days
#24

MCX 13 Power Contacor 4 Pole of capacity 80 Amp confirms to IS

MCX 13 Power Contacor 4 Pole of capacity 80 Amp confirms to IS

2 pieces Delivery: 30 days
#25

MCX 22 Power Contacor 4 Pole of capacity 105 Amp confirms to IS

MCX 22 Power Contacor 4 Pole of capacity 105 Amp confirms to IS

2 pieces Delivery: 30 days
#26

MCX 23 Power Contacor 4 Pole of capacity Each 130 Amp confirms to IS

MCX 23 Power Contacor 4 Pole of capacity Each 130 Amp confirms to IS

2 pieces Delivery: 30 days
#27

Battery terminals of copper wire FRLSH 25 Sqmm Red and Black for DG SET 4 feet Each

Battery terminals of copper wire FRLSH 25 Sqmm Red and Black for DG SET 4 feet Each

6 pieces Delivery: 30 days
#28

LED Post top lantern Arian plus LED type 30 watt Warm white colour made in spun aluminium powder coated housing with higher efficiency lighting and IP 65 protection

LED Post top lantern Arian plus LED type 30 watt Warm white colour made in spun aluminium powder coated housing with higher efficiency lighting and IP 65 protection with soft 360 deg light distribution 230 volts AC outdoor type

10 pieces Delivery: 30 days
#29

LED Post top lantern Arian plus LED type 18 or 20 watt Warm white colour made in spun aluminium powder coated housing with higher efficiency lighting and IP 65 protection with soft 360

LED Post top lantern Arian plus LED type 18 or 20 watt Warm white colour made in spun aluminium powder coated housing with higher efficiency lighting and IP 65 protection with soft 360 deg light distribution 230 volts AC outdoor type

10 pieces Delivery: 30 days
#30

LED Post top lantern Blaze B-1 22 Holder without lamp Dimension 200mm x 240mm higher efficiency lighting and IP 65 protection with soft 360 deg light distribution

LED Post top lantern Blaze B-1 22 Holder without lamp Dimension 200mm x 240mm higher efficiency lighting and IP 65 protection with soft 360 deg light distribution

40 pieces Delivery: 30 days
#31

Automatic street light panel hgs smarty Series of capacity 6 KW Astronomical switch with MCB TPN 40 Amp Contactor of capacity 32 Amp TP Conforms to IS

Automatic street light panel hgs smarty Series of capacity 6 KW Astronomical switch with MCB TPN 40 Amp Contactor of capacity 32 Amp TP Conforms to IS

2 pieces Delivery: 30 days
#32

Thermoplastic cable entry junction boxes lof size 300 x 200 x 105 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps nuts bolts and washers including

Thermoplastic cable entry junction boxes lof size 300 x 200 x 105 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps nuts bolts and washers including

40 pieces Delivery: 30 days
#33

HT Insulation tape

HT Insulation tape

500 pieces Delivery: 30 days
#34

HT pin Insulator polymer

HT pin Insulator polymer

50 pieces Delivery: 30 days
#35

HT post Insulator polymer

HT post Insulator polymer

50 pieces Delivery: 30 days
#36

HT disc Insulator polymer

HT disc Insulator polymer

10 pieces Delivery: 30 days
#37

HT DO fuse wire 10 Amp

HT DO fuse wire 10 Amp

100 pieces Delivery: 30 days
#38

HT DO fuse wire 16 Amp

HT DO fuse wire 16 Amp

100 pieces Delivery: 30 days
#39

HT DO fuse wire 25 Amp

HT DO fuse wire 25 Amp

100 pieces Delivery: 30 days
#40

HT DO fuse wire 40 Amp

HT DO fuse wire 40 Amp

100 pieces Delivery: 30 days
#41

Pool standard G24 pool balance moudle to increase chlorine level in pool water target limit for free available chlorine granules packing 50 kgs in plastic container

Pool standard - G24 pool balance moudle to increase chlorine level in pool water target limit for free available chlorine granules packing 50 kgs in plastic container

6 pieces Delivery: 30 days
#42

Pool standard B23 pool algaecide specifically effictive against green black spot and mustard algae packing 5 kgs sealed plastic container

Pool standard B23 pool algaecide specifically effictive against green black spot and mustard algae packing 5 kgs sealed plastic container

6 pieces Delivery: 30 days
#43

Pool standard A94 fast acting pool clarifier to clear dull hazy or cloudy water which can occur in newly filled pools during warm weather with pool start up

Pool standard - A94 fast acting pool clarifier to clear dull hazy or cloudy water which can occur in newly filled pools during warm weather with pool start up or with algae growth packing 25 kgs sealed plastic container

6 pieces Delivery: 30 days
#44

Pool standard T19 Pool balance module to check water PH plus Chlorine test kit Hardness kit packing strip in sealed plastic container

Pool standard - T19 Pool balance module to check water PH + Chlorine test kit Hardness kit packing strip in sealed plastic container

6 pieces Delivery: 30 days
#45

Tube light Reteofit 20 W LED

Tube light (Reteofit) 20 W LED

207 pieces Delivery: 30 days
#46

MCCB tpn 63 Amp 415V 10KA C Curv

MCCB tpn 63 Amp 415V 10KA C Curv

30 pieces Delivery: 30 days

Technical Specifications 5 Items

Item #1 Details

View Catalog
Category Specification Requirement
Specification Governing Specification As per IS 7809 (Part 3/ Sec1)
Classification Type General Purpose Type (suitable for application at temperature above 0°C, and designated as F-PVCp/90/0/Tp)
Dimension Length of tape in a roll (in metre) 25
Dimension Width of tape (in mm) (Tolerance as per clause 6.2.1 of the IS 7809 (part1)) 15
Dimension Thickness (in mm) (Tolerance ± 0.025 mm) 0.125

Required Documents

1

GST registration certificate

2

Permanent Account Number (PAN) card

3

Experience certificates for similar cable tape supply

4

Financial statements (audited if available)

5

EMD/Security deposit submission proof

6

Technical bid documents demonstrating IS 7809 (Part 1) compliance

7

OEM authorizations and MES brand approval documentation

Reverse Auction Schedule

Completed

Start

13-Mar-2026, 4:00 pm

End

21-Mar-2026, 9:00 am

Duration: 185 hours

Reverse Auction Document

✅ RA concluded. Check financial results for final rankings.

Technical Results

S.No Seller Item Date Status
1
ASHOK AND SONS   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL12-03-2026 10:11:09
2
Dhruv enterprises   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL12-03-2026 10:24:48
3
KRISHNA COMPUTEC   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL12-03-2026 09:17:07
4
NATIONAL PLYWOOD CO   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL11-03-2026 19:39:50
5
SHREE SHYAM ENTERPRISE   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL12-03-2026 00:53:55
6
Truworth Technologies   Under PMA
Make : KINJAL Model : PVC TAPE 15 MM X 25 MTR BLACK KINJAL12-03-2026 10:37:12

Reverse Auction Results Final Prices

These are the final prices after the reverse auction event. Prices may be lower than initial bids.

Rank Seller Final Price Item
L1NATIONAL PLYWOOD CO(MII)   Under PMA Winner ₹35,98,720Item Categories : Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS
L2KRISHNA COMPUTEC (MSE,MII)   Under PMA₹38,03,527Item Categories : Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS
L3Truworth Technologies (MSE,MII)   Under PMA₹39,90,002Item Categories : Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS
L4ASHOK AND SONS (MSE,MII)   Under PMA₹40,49,759Item Categories : Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS
L5SHREE SHYAM ENTERPRISE (MSE,MII)   Under PMA₹41,35,720Item Categories : Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS

🎉 L1 Winner

NATIONAL PLYWOOD CO(MII)   Under PMA

Final Price: ₹35,98,720

Frequently Asked Questions

Key insights about MAHARASHTRA tender market

How to bid for the IS 7809 compliant tape tender in Wardha?

To bid, ensure MES brand approval for your tape, submit GST, PAN, and experience certificates, provide IS 7809 (Part 1) compliance evidence, and include an all-inclusive bid covering possible 25% quantity variation. Include EMI details and demonstrate financial capacity for delivery commitments.

What documents are required for the Wardha cable tape procurement?

Submit GST certificate, PAN card, experience certificates in similar supply, audited financial statements, EMD proof, OEM authorization, and MES brand approval for the offered product. Technical bid must prove compliance with IS 7809 (Part 1) specifications.

What standards govern the tape specifications for this tender?

Governing standard is IS 7809 (Part 1) covering tape width tolerance (clause 6.2.1) and thickness tolerance ±0.025 mm, plus general insulation and conductor classifications. Ensure your product meets these exact tolerances and provides test reports on these parameters.

What is the scope of supply for this Indian Army tender?

Scope is limited to the supply of goods (cable tape) with all cost components included in the bid price. The contract permits a 25% quantity variation at contracted rates, affecting delivery planning and pricing.

When is the delivery period linked to the option clause in this tender?

Delivery timing is determined by the option clause, starting from the last date of the original delivery order, with additional time calculated as (increased quantity divided by original quantity) times original delivery period, minimum 30 days.

What is required for MES brand approval in this tender?

Bidder must obtain MES brand approval for the offered tape from competent authority. This involves submitting brand authorization and product compliance documents demonstrating IS 7809 alignment and conformity to specified tape dimensions.

What is the minimum information needed in the technical bid?

The technical bid must include evidence of IS 7809 (Part 1) compliance, tape length per roll, width and thickness tolerances, material classifications, conductor and insulation details, and MES approval status for the proposed brand.

How does the 25% quantity variation impact pricing?

The purchaser may increase or decrease order quantity by up to 25% at contract, with delivery time adjusted accordingly. Price remains at contracted rates; bidders should budget for potential stock and scheduling adjustments.