Open Tender for Quad Copter 650 to 700 mm Class Frame Kit,Brushless Motor,ESC 40A, 6S,Flight Controller, 32-bit ARM in KOLLAM, KERALA
Progress
Director General Of National Cadet Corps (dgncc) announces a tender for Quad Copter 650 to 700 mm Class Frame Kit, Brushless Motor, ESC 40A, 6S, Flight Controller, 32-bit ARM Cortex- M7 class or better, Propellers 15 by 5. 5 inch, Carbon Fibre Set, Power Distribution Board, High Current, 6S with BEC, Power Module, Shock Absorber Set, LiPo Battery, 6S, 8000mAh, Radio Transmitter and Receiver, 10 Channel, GPS and Compass Module M9N or equivalent, Telemetry Kit, Wiring, Connectors Set, LiPo Battery Charger, 6S, Balance or Multi Port in KOLLAM, KERALA. Quantity: 41. Submission Deadline: 16-10-2026 15: 00: 00. Last date to apply is approaching fast!
Tender Data
Bid Details
Quantity
41
Category
Quad Copter 650 to 700 mm Class Frame Kit
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
3 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
No
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
1
Warranty Period
1 years
Experience Required
1 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Quad Copter 650 to 700 mm Class Frame Kit , Brushless Motor , ESC 40A, 6S , Flight Controller, 32-bit ARM Cortex- M7 class or better , Propellers 15 by 5.5 inch, Carbon Fibre Set , Power Distribution Board , High Current, 6S with BEC , Power Module , Shock Absorber Set , LiPo Battery, 6S, 8000mAh , Radio Transmitter and Receiver, 10 Channel , GPS and Compass Module M9N or equivalent , Telemetry Kit , Wiring, Connectors Set , LiPo Battery Charger, 6S, Balance or Multi Port
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Kollam
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Kollam | Kollam | - | - | 2 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9758510.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Corrigendum Updates
1 Update Update
Extended Deadline
16-Oct-2026, 9:30 am
Opening Date
17-Oct-2026, 9:30 am
Bill of Quantities (BOQ)
14 Items Sign in to view GEM price trends Sign in for GEM prices
Quad Copter 650 to 700 mm Class Frame Kit
Carbon fibre or glass reinforced composite quadcopter frame, 650 to 700 mm class wheelbase, fixed or foldable arm design, integrated mounting deck for flight controller, PDB and battery tray, arm wall thickness greater than or equal to 4mm carbon tube, frame weight less than or equal to 1100 to 1200 g, payload capacity greater than or equal to3kg, includes landing gear.
Brushless Motor
Brushless DC outrunner motor, KV rating 350 to 410KV, continuous current handling greater than or equal to 25A, max thrust greater than or equal to 1.5kg on 6S LiPo with 15 inch propeller, unit weight 110g to 150g
ESC 40A, 6S
BLHeli_32 (or equivalent) firmware ESC, continuous current rating 40A (burst greater than or equal to 55A), input 6S LiPo
Flight Controller, 32-bit ARM Cortex-M7 class or better
32-bit ARM Cortex M7 or better processor, open source autopilot firmware compatible (ArduPilot/PX4), integrated barometer, minimum 4 UART ports + 1 CAN port, microSD logging, safety switch & buzzer included, supply voltage 4.3 to 5.4V.
Propellers 15 by 5.5 inch, Carbon Fibre Set
15 by 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced CW/CCW pair per set.
Power Distribution Board , High Current, 6S with BEC
PDB rated for 6S input, continuous current handling greater than or equal to 100A, integrated 5V/3A and 12V/2A BEC outputs, XT60 input connector, multiple ESC output pads.
Power Module
Voltage & current sensing power module compatible with Pixhawk/Cube-series flight controllers, input up to 6S LiPo, regulated 5.3V/3A output to FC, analog voltage/current sensing output.
Shock Absorber Set
Anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 650mm to 700 mm class frame.
LiPo Battery, 6S, 8000mAh
Lithium Polymer battery, 6S (22.2v nominal, 25.2V Fully Charged), capacity 8000mAh, minimum continuous discharge rate 25C, equipped with an Amass XT60 main power connector with balance connector, integral over-charge/discharge protection.
Radio Transmitter and Receiver, 10 Channel
2.4GHz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, Mode 2 configuration, PPM/SBUS/iBUS compatible receiver output.
GPS and Compass Module M9N or equivalent
u blox M9N (or equivalent) GNSS module with integrated magnetometer/compass, position update rate greater than or equal to 10Hz, UART/I2C interface, integrated LED & safety switch pad.
Telemetry Kit
Air to ground telemetry radio pair, operating frequency 433MHz or 915MHz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, USB & UART interface, compatible with Mission Planner/Ground Control.
Wiring, Connectors Set
XT60 connectors, silicone insulated wire (12 to 14 AWG), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit.
LiPo Battery Charger, 6S, Balance or Multi Port
AC/DC input balance charger, compatible with 6S (22.2V) LiPo batteries, minimum charge current 10A per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1C for 8000mAh packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, LCD/display showing voltage, current and charge status, XT60-compatible output leads with balance-lead adapter.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Quad Copter 650 to 700 mm Class Frame Kit | Carbon fibre or glass reinforced composite quadcopter frame, 650 to 700 mm class wheelbase, fixed or foldable arm design, integrated mounting deck for flight controller, PDB and battery tray, arm wall thickness greater than or equal to 4mm carbon tube, frame weight less than or equal to 1100 to 1200 g, payload capacity greater than or equal to3kg, includes landing gear. | 2 | pieces | 3kgayathrigem | 30 | |
| 2 | Brushless Motor | Brushless DC outrunner motor, KV rating 350 to 410KV, continuous current handling greater than or equal to 25A, max thrust greater than or equal to 1.5kg on 6S LiPo with 15 inch propeller, unit weight 110g to 150g | 8 | pieces | 3kgayathrigem | 30 | |
| 3 | ESC 40A, 6S | BLHeli_32 (or equivalent) firmware ESC, continuous current rating 40A (burst greater than or equal to 55A), input 6S LiPo | 8 | pieces | 3kgayathrigem | 30 | |
| 4 | Flight Controller, 32-bit ARM Cortex-M7 class or better | 32-bit ARM Cortex M7 or better processor, open source autopilot firmware compatible (ArduPilot/PX4), integrated barometer, minimum 4 UART ports + 1 CAN port, microSD logging, safety switch & buzzer included, supply voltage 4.3 to 5.4V. | 2 | pieces | 3kgayathrigem | 30 | |
| 5 | Propellers 15 by 5.5 inch, Carbon Fibre Set | 15 by 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced CW/CCW pair per set. | 4 | pieces | 3kgayathrigem | 30 | |
| 6 | Power Distribution Board , High Current, 6S with BEC | PDB rated for 6S input, continuous current handling greater than or equal to 100A, integrated 5V/3A and 12V/2A BEC outputs, XT60 input connector, multiple ESC output pads. | 2 | pieces | 3kgayathrigem | 30 | |
| 7 | Power Module | Voltage & current sensing power module compatible with Pixhawk/Cube-series flight controllers, input up to 6S LiPo, regulated 5.3V/3A output to FC, analog voltage/current sensing output. | 2 | pieces | 3kgayathrigem | 30 | |
| 8 | Shock Absorber Set | Anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 650mm to 700 mm class frame. | 2 | pieces | 3kgayathrigem | 30 | |
| 9 | LiPo Battery, 6S, 8000mAh | Lithium Polymer battery, 6S (22.2v nominal, 25.2V Fully Charged), capacity 8000mAh, minimum continuous discharge rate 25C, equipped with an Amass XT60 main power connector with balance connector, integral over-charge/discharge protection. | 2 | pieces | 3kgayathrigem | 30 | |
| 10 | Radio Transmitter and Receiver, 10 Channel | 2.4GHz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, Mode 2 configuration, PPM/SBUS/iBUS compatible receiver output. | 2 | pieces | 3kgayathrigem | 30 | |
| 11 | GPS and Compass Module M9N or equivalent | u blox M9N (or equivalent) GNSS module with integrated magnetometer/compass, position update rate greater than or equal to 10Hz, UART/I2C interface, integrated LED & safety switch pad. | 2 | pieces | 3kgayathrigem | 30 | |
| 12 | Telemetry Kit | Air to ground telemetry radio pair, operating frequency 433MHz or 915MHz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, USB & UART interface, compatible with Mission Planner/Ground Control. | 2 | pieces | 3kgayathrigem | 30 | |
| 13 | Wiring, Connectors Set | XT60 connectors, silicone insulated wire (12 to 14 AWG), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit. | 2 | pieces | 3kgayathrigem | 30 | |
| 14 | LiPo Battery Charger, 6S, Balance or Multi Port | AC/DC input balance charger, compatible with 6S (22.2V) LiPo batteries, minimum charge current 10A per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1C for 8000mAh packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, LCD/display showing voltage, current and charge status, XT60-compatible output leads with balance-lead adapter. | 1 | pieces | 3kgayathrigem | 30 |
Categories
77
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Bidder Turnover
Certificate (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer