Active GEM

Tender Notice for Capacitors for Electric Fan Motors as per IS 1709 (V2),Capacitors for Electric Fan Motors as per IS in PITHORAGARH, UTTARAKHAND

Bid Publish Date

25-Aug-2026, 3:55 pm

Bid End Date

04-Sep-2026, 4:00 pm

Location

PITHORAGARH , UTTARAKHAND

Corrigendum Updated WhatsApp Generate Docs

Progress

Issue25-Aug-2026, 3:55 pm

Corrigendum25-Aug-2026

AwardPending

Indian Army announces a tender for Capacitors for Electric Fan Motors as per IS 1709 (V2) (Q3), Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2), Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2), Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2), Electrical Plugs (V2) ISI Marked to IS 1293 (Q2), Elecric Bells and Accessories as per IS 2268 (Q3), Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2) (Q3), Health Faucet (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) in PITHORAGARH, UTTARAKHAND. Quantity: 1348. Submission Deadline: 04-09-2026 16: 00: 00. Last date to apply is approaching fast!

Tender Data

Bid Details

Quantity

1348

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

OEM Avg. Turnover

Past Performance

50 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Capacitors for Electric Fan Motors as per IS 1709 (V2) (Q3) , Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2) , Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2) , Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2) , Electrical Plugs (V2) ISI Marked to IS 1293 (Q2) , Elecric Bells and Accessories as per IS 2268 (Q3) , Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2) (Q3) , Health Faucet (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3)

Advisory Bank

State Bank of India

ePBG Percentage

ePBG Duration (Months)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

PITHORAGARH

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	PITHORAGARH	PITHORAGARH	-	-	8	30	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 34

GeM-Bidding-9799615.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Corrigendum Updates

1 Update

Update

25-Aug-2026

Extended Deadline

04-Sep-2026, 10:30 am

Opening Date

04-Sep-2026, 11:00 am

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 30 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Capacitor	Self Healing Capacitor
Generic	Rated Capacitance of the fan capacitor (µF)	2.5
Generic	Terminal of Capacitor	Lead

Item #2 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Capacitor	Self Healing Capacitor
Generic	Rated Capacitance of the fan capacitor (µF)	3.5
Generic	Terminal of Capacitor	Lead

Item #3 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Capacitor	Self Healing Capacitor
Generic	Rated Capacitance of the fan capacitor (µF)	4.0
Generic	Terminal of Capacitor	Lead

Item #4 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Current	16.0
Performance Parameters	Number of Pins	6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	With Shutter
Construction	Current Carrying Contact Material	Brass
Construction	Type of Terminal Connection	Screw Type Terminal

Item #5 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Current	6.0
Performance Parameters	Number of Pins	3, 6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	Without Shutter
Construction	Current Carrying Contact Material	Copper
Construction	Type of Terminal Connection	Screw Type Terminal

Item #6 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Current	16.0
Performance Parameters	Number of Pins	6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	With Shutter
Generic	Current Carrying Material	Brass
Generic	Type of Terminal Connection	Screw Type Terminal

Item #7 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Current	16.0
Performance Parameters	Number of Pins	3, 6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	Without Shutter
Generic	Current Carrying Material	Copper
Generic	Type of Terminal Connection	Screw Type Terminal

Item #8 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Current	6.0
Performance Parameters	Number of Pins	3, 6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	Without Shutter
Generic	Current Carrying Material	Brass
Generic	Type of Terminal Connection	Screw Type Terminal

Item #9 Details

View Catalog

Category	Specification	Requirement
Generic	Rated Current	6A
Generic	Nature of Switch	1 way switch
Switch Classification	Type of Terminal Connection	Screw type terminal
Construction	Current Carrying Contact Material	Brass

Item #10 Details

View Catalog

Category	Specification	Requirement
Generic	Rated Current	6A
Generic	Nature of Switch	bell push switch
Switch Classification	Type of Terminal Connection	Screw type terminal
Construction	Current Carrying Contact Material	Brass

Item #11 Details

View Catalog

Category	Specification	Requirement
Generic	Rated Current	6A
Generic	Nature of Switch	2 way switch
Switch Classification	Type of Terminal Connection	Screw type terminal
Construction	Current Carrying Contact Material	Brass

Item #12 Details

View Catalog

Category	Specification	Requirement
Generic	Rated Current	16A
Generic	Nature of Switch	1 way switch
Switch Classification	Type of Terminal Connection	Screw type terminal
Construction	Current Carrying Contact Material	Brass

Item #13 Details

View Catalog

Category	Specification	Requirement
CONSTRUCTION	Number of poles	2 Pole + Earth
CONSTRUCTION	Rated Current (in A)	16 A
CONSTRUCTION	Number of Pins	3
CONSTRUCTION	Plug Classification	For Class 2 Appliances

Item #14 Details

View Catalog

Category	Specification	Requirement
CONSTRUCTION	Number of poles	2 Pole + Earth
CONSTRUCTION	Rated Current (in A)	6 A
CONSTRUCTION	Number of Pins	3
CONSTRUCTION	Plug Classification	For Class 1 Appliances

Item #15 Details

View Catalog

Category	Specification	Requirement
GENERIC	Product ISI marked	NO - But conforming to IS:2268
GENERIC	Type of bell	Ding Dong type

Item #16 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Size of Regulator	Socket Size
Performance Parameters	Number of Steps	6

Item #17 Details

View Catalog

Category	Specification	Requirement
Generic	Pressure rating (Bar)	0.5
Generic	Flow Rate , Minimum (lpm)	9, 10, 11 Or higher
Material & Construction	Material of construction	Brass
Material & Construction	Hose Material	Stainless Steel
Material & Construction	Hose length ( in meters)	1.5
Material & Construction	Handle Type	Lever
Material & Construction	Anti bacterial coating	No

Item #18 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	EPDM Rubber, Nitrile Rubber (NBR), Silicone Rubber, PVC, CPVC, PTFE (Teflon), Stainless Steel (Corrugated)
Material & Construction	Cover Material	PVC Outer Cover
Dimensions	Nominal Bore Size (in mm)	8 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	600 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	PVC (Polyvinyl Chloride)
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Light Duty

Item #19 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	PVC Outer Cover
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	PVC (Polyvinyl Chloride)
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Light Duty

Item #20 Details

View Catalog

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polypropylene
Material	Materials of Hinging Device	Mild Steel
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 1

Item #21 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #22 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #23 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	50 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet renewable seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	17.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	6.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	20.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	68 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #24 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stem, hinge pin and plug	Forged Brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #25 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Forged Brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #26 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #27 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	50 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stem, hinge pin and plug	Forged Brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Gland Packing	Asbestos (conforming to 4687)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	17.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	6.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	20.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	68 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #28 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Item #29 Details

View Catalog

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	40 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet renewable seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	13.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	5.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	15.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	55 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Item #30 Details

View Catalog

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Nitrile Rubber (NBR)
Material & Construction	Cover Material	PVC Coated Stainless Steel Braid
Dimensions	Nominal Bore Size (in mm)	10 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	300 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut with Nipple
End Connections & Fittings	End Fitting Material	PTMT (Polytetra Methylene Terephthalate)
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

UTTARAKHAND State tenders

PITHORAGARH , UTTARAKHAND City tenders

Categories 4 available

FLUID MECHANICS EQUIPMENT

SLIDER VALVES

DISCRETE COMPONENTS

ELECTRICAL

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Tender Notice for Capacitors for Electric Fan Motors as per IS 1709 (V2),Capacitors for Electric Fan Motors as per IS in PITHORAGARH, UTTARAKHAND

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 34

GeM-Bidding-9799615.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

Other Documents

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Authority & Contact

Corrigendum Updates

Update

Categories 38

🤖 AI-Powered Bidder Prediction

Required Documents

Technical Specifications 30 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Item #22 Details