Indian Army Drone Frame for High Altitude 6-Axis Indigenous Frame - RTK GNSS, 12S-14S Li-ion, 2026
Progress
Tender Overview
The Indian Army, Department Of Military Affairs, invites bids for a Frame Indigenous 6_axis Drone Frame designed for High Altitude operations. The scope includes a complete drone frame system with wheelbase 1680mm, 100KV brushless motors, 30 inch propellers, and compatibility with 12S–14S Li‑ion packs. Embedded systems include a 32‑bit STM32H753 Cortex‑M7 flight controller, RTK GNSS with Beidou/Galileo/GLONASS, HD video link, and a 3_axis stabilized EO gimbal with 10x optical zoom. Estimated value not disclosed; EMD is ₹75,182. Location for delivery and commissioning is Bengaluru HALASURU Army Base Workshop, with data sheet validation and BOM alignment mandatory.
- Key differentiators include GPS-denied and RF-denied resilience, long-range telemetry in 860‑930 MHz, and auto antenna tracker with MAVLink compatibility. The contract implies potential option clauses expanding quantity by up to 50% at contract rates. The submission requires product data sheets to be uploaded for verification against offered parameters. GST is supplier‑dependent with applicable rates reimbursed per actuals.
Technical Specifications & Requirements
- Product: Frame Indigenous 6_axis Drone Frame for High Altitude with integrated propulsion and control architecture
- Wheelbase: 1680 mm; Motors: BLDC Set CW/CCW 100 KV; Propellers: 30 inch; Battery: 12S–14S Li‑ion; ESC: Inbuilt; Flight Controller: 32_bit STM32H753 Cortex‑M7 480 MHz with dedicated STM32F103
- GNSS: RTK-based with Beidou/Galileo/GLONASS; Telemetry: 860‑930 MHz ISM band; Video link: HD digital; EO gimbal: 3_axis with 10x optical zoom; RC: 2.4 GHz; RF module: long-range transmitter 868/915 MHz ISM band; Power: 2S‑14S input, 60V max, 5.2V 3A outputs; Battery and charger: indigenous Li‑Ion 65–85 Ah packs; Dropping payload: minimum 5 kg; Case: rugged polymer composite; Environmental: water/dust/shock resistant.
- Additional: GPS/RF resilient hardware for GPS denied/RF denied environments; Workstation spec: Intel i5+, 16 GB RAM, 512 GB SSD; Delivery/ installation at HAL Bengaluru; Data sheets required with bid.
Terms, Conditions & Eligibility
- EMD: ₹75,182; Delivery: from order date to HAL Bengaluru address; Payment: GST as actuals, vendor to submit EFT mandate; Documents: PAN, GSTIN, cancelled cheques; EFT mandate; Data sheet; OEM authorizations if applicable; Option clause allows +/- up to 50% quantity; Termination rights for non‑performance; Data sheets must match technical parameters; Bidder must ensure GST applicability and comply with delivery terms; GST reimbursements subject to actuals or quoted rates.
Key Specifications
-
Frame Indigenous 6_axis Drone Frame with wheelbase 1680 mm
-
100 KV BLDC motors (CW/CCW) and 30 inch propellers
-
12S–14S Li-ion battery compatibility; inbuilt ESC
-
32-bit STM32H753 M7 flight controller with dedicated STM32F103
-
RTK GNSS with Beidou/Galileo/GLONASS support
-
860–930 MHz ISM band telemetry; HD digital video link
-
3-axis EO gimbal with 10x optical zoom; 2.4 GHz RC; long-range RF 868/915 MHz
-
Power module for 2S–14S, up to 60V; 5.2V 3A outputs; rugged protective case
-
Indigenous Li‑Ion battery pack 65–85 Ah; battery strap; indigenous charger 12S–14S, 10–20A
Terms & Conditions
-
EMD: ₹75,182; delivery to HAL Bengaluru with data sheet verification
-
Option clause allows +/- 50% quantity and extension timing
-
GST terms as actuals; EFT mandate and bank-certified documents required
Important Clauses
Payment Terms
GST reimbursement as actuals or as per applicable rates; EFT mandate required; data sheets to match
Delivery Schedule
Delivery/installation at HAL Bengaluru; delivery period linked to order and extended per option clause
Penalties/Liquidated Damages
Buyer may terminate for non-delivery or material term breach; penalties linked to delivery performance
Bidder Eligibility
-
GST registration with valid GSTIN
-
PAN card and financial stability documentation
-
Data sheet alignment with offered parameters
-
OEM authorization when OEM is required
-
Capability to deliver at HAL Bengaluru and comply with GPS/RF resilience requirements
Tender Data
Bid Details
Quantity
51
Bid Validity
180 (Days)
Bid Type
Service
Preference & Exemptions
EMD Required
Yes
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Item Category
Frame Indigenous 6_axis Drone Frame for High Altitude with specifications Wheelbase _ 1680mm , BLDC Motors Set_CW CCW_ BLDC motors with 100KV rating with 30 inch propeller_ Compatible with 12S to 14S Li_ion battery systems_ Inbuilt compatible ESC_ Operating temperature Range , Flight Controller 32_bit STM32H753 Cortex_M7 processor _480 MHz_ with dedicated STM32F103 , RTK based GNSS Precision RTK GNSS_ _Supports Beidou_ Galileo_ GLONASS_ , Telemetry Long_range bidirectional digital telemetry operating in the 860_930 MHz ISM band_ , Video link System Integrated HD digital video_ RC control_ and telemetry transmission system , Gimbal based EO Camera 3_axis high_precision stabilized EO gimbal with 10x optical zoom _ , Radio Controller Radio Controller with Transmission mission Frequesncy 2_400GHz_ , Long Range RF Communication Module compatible long_range RF transmitter module operating in the 868_915 MHz ISM band with , Power Module Supports 2S_14S batteries Input voltage upto 60V Output 5_2V_3A , Auto Antenna Tracker MAV link compatible Supports upto10AATs Tracking accuracy Auto pan tilt tracking inch , Directional patch Antenna Operates on 2_4 GHz and 5_8GHz Gain , BEC Module and PDB module Supporting 2S_14S batteries Input voltage upto 60V Output 5_2V_3A , Connectors XT60 and XT30 connectors_ Battery power connector GH 1_25mm locking connectors , Receiver Compact long_range diversity RF receiver operating in the 868_915 MHz ISM band_ , Current and voltage sensor Current measurement 0_250A Supports upto14S batteries Real time power monitoring , Protective Sleeve for wires Nominal size 16mm Expansion ratio upto150 percent , Battery Customized Indegenous Li_Ion Bty Pack Nos 01 Capacity between 65AH to 85AH _ , Battery Strap Battery Strap Belt Reusable type forfirmly holding a battery of dimension 350mm x 160mm x 160mm _ , Indegenous Battery Charger 12S _ 14S Output upto 10_20A Single channel _ Dual Channel Support_A , Workstation Intel Core i5 or better 16 GB RAM 512 GB SSD minimum 10 inch inch FH Display , GPS Resilient Hardware Capabilty for operating successfully in GPS denied and GPS Spoofed , RF Resilient Hardware Capabilty for functioning in RF denied environment from launch to target_ , Payload Dropping Mechanism Payload requirement_ 5kg min weight carrying capacity _ , Hard Transport Case Rugged Polymer _ Composite construction Water_ dust and shock resistant
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
14
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
BANGALORE
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | BANGALORE | BANGALORE | - | - | 1 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9813803.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
25 Items Sign in to view GEM price trends Sign in for GEM prices
Frame Indigenous 6_axis Drone Frame for High Altitude with specifications Wheelbase _ 1680mm
As per Technical Specification
BLDC Motors Set_CW CCW_ BLDC motors with 100KV rating with 30 inch propeller_ Compatible with 12S to 14S Li_ion battery systems_ Inbuilt compatible ESC_ Operating temperature Range
As per Technical Specification
Flight Controller 32_bit STM32H753 Cortex_M7 processor _480 MHz_ with dedicated STM32F103
As per Technical Specification
RTK based GNSS Precision RTK GNSS_ _Supports Beidou_ Galileo_ GLONASS_
As per Technical Specification
Telemetry Long_range bidirectional digital telemetry operating in the 860_930 MHz ISM band_
As per Technical Specification
Video link System Integrated HD digital video_ RC control_ and telemetry transmission system
As per Technical Specification
Gimbal based EO Camera 3_axis high_precision stabilized EO gimbal with 10x optical zoom _
As per Technical Specification
Radio Controller Radio Controller with Transmission mission Frequesncy 2_400GHz_
As per Technical Specification
Long Range RF Communication Module compatible long_range RF transmitter module operating in the 868_915 MHz ISM band with
As per Technical Specification
Power Module Supports 2S_14S batteries Input voltage upto 60V Output 5_2V_3A
As per Technical Specification
Auto Antenna Tracker MAV link compatible Supports upto10AATs Tracking accuracy Auto pan tilt tracking inch
As per Technical Specification
Directional patch Antenna Operates on 2_4 GHz and 5_8GHz Gain
As per Technical Specification
BEC Module and PDB module Supporting 2S_14S batteries Input voltage upto 60V Output 5_2V_3A
As per Technical Specification
Connectors XT60 and XT30 connectors_ Battery power connector GH 1_25mm locking connectors
As per Technical Specification
Receiver Compact long_range diversity RF receiver operating in the 868_915 MHz ISM band_
As per Technical Specification
Current and voltage sensor Current measurement 0_250A Supports upto14S batteries Real time power monitoring
As per Technical Specification
Protective Sleeve for wires Nominal size 16mm Expansion ratio upto150 percent
As per Technical Specification
Battery Customized Indegenous Li_Ion Bty Pack Nos 01 Capacity between 65AH to 85AH _
As per Technical Specification
Battery Strap Battery Strap Belt Reusable type forfirmly holding a battery of dimension 350mm x 160mm x 160mm _
As per Technical Specification
Indegenous Battery Charger 12S _ 14S Output upto 10_20A Single channel _ Dual Channel Support_A
As per Technical Specification
Workstation Intel Core i5 or better 16 GB RAM 512 GB SSD minimum 10 inch inch FH Display
As per Technical Specification
GPS Resilient Hardware Capabilty for operating successfully in GPS denied and GPS Spoofed
As per Technical Specification
RF Resilient Hardware Capabilty for functioning in RF denied environment from launch to target_
As per Technical Specification
Payload Dropping Mechanism Payload requirement_ 5kg min weight carrying capacity _
As per Technical Specification
Hard Transport Case Rugged Polymer _ Composite construction Water_ dust and shock resistant
As per Technical Specification
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Frame Indigenous 6_axis Drone Frame for High Altitude with specifications Wheelbase _ 1680mm | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 2 | BLDC Motors Set_CW CCW_ BLDC motors with 100KV rating with 30 inch propeller_ Compatible with 12S to 14S Li_ion battery systems_ Inbuilt compatible ESC_ Operating temperature Range | As per Technical Specification | 12 | nos | dgm_mco_2021 | 30 | |
| 3 | Flight Controller 32_bit STM32H753 Cortex_M7 processor _480 MHz_ with dedicated STM32F103 | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 4 | RTK based GNSS Precision RTK GNSS_ _Supports Beidou_ Galileo_ GLONASS_ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 5 | Telemetry Long_range bidirectional digital telemetry operating in the 860_930 MHz ISM band_ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 6 | Video link System Integrated HD digital video_ RC control_ and telemetry transmission system | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 7 | Gimbal based EO Camera 3_axis high_precision stabilized EO gimbal with 10x optical zoom _ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 8 | Radio Controller Radio Controller with Transmission mission Frequesncy 2_400GHz_ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 9 | Long Range RF Communication Module compatible long_range RF transmitter module operating in the 868_915 MHz ISM band with | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 10 | Power Module Supports 2S_14S batteries Input voltage upto 60V Output 5_2V_3A | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 11 | Auto Antenna Tracker MAV link compatible Supports upto10AATs Tracking accuracy Auto pan tilt tracking inch | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 12 | Directional patch Antenna Operates on 2_4 GHz and 5_8GHz Gain | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 13 | BEC Module and PDB module Supporting 2S_14S batteries Input voltage upto 60V Output 5_2V_3A | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 14 | Connectors XT60 and XT30 connectors_ Battery power connector GH 1_25mm locking connectors | As per Technical Specification | 8 | nos | dgm_mco_2021 | 30 | |
| 15 | Receiver Compact long_range diversity RF receiver operating in the 868_915 MHz ISM band_ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 16 | Current and voltage sensor Current measurement 0_250A Supports upto14S batteries Real time power monitoring | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 17 | Protective Sleeve for wires Nominal size 16mm Expansion ratio upto150 percent | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 18 | Battery Customized Indegenous Li_Ion Bty Pack Nos 01 Capacity between 65AH to 85AH _ | As per Technical Specification | 2 | set | dgm_mco_2021 | 30 | |
| 19 | Battery Strap Battery Strap Belt Reusable type forfirmly holding a battery of dimension 350mm x 160mm x 160mm _ | As per Technical Specification | 8 | nos | dgm_mco_2021 | 30 | |
| 20 | Indegenous Battery Charger 12S _ 14S Output upto 10_20A Single channel _ Dual Channel Support_A | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 21 | Workstation Intel Core i5 or better 16 GB RAM 512 GB SSD minimum 10 inch inch FH Display | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 22 | GPS Resilient Hardware Capabilty for operating successfully in GPS denied and GPS Spoofed | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 23 | RF Resilient Hardware Capabilty for functioning in RF denied environment from launch to target_ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 24 | Payload Dropping Mechanism Payload requirement_ 5kg min weight carrying capacity _ | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 | |
| 25 | Hard Transport Case Rugged Polymer _ Composite construction Water_ dust and shock resistant | As per Technical Specification | 1 | nos | dgm_mco_2021 | 30 |
Categories
33
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
GST Registration Certificate
Permanent Account Number (PAN) Card
Cancelled Cheque
EFT Mandate certified by Bank
Product Data Sheet uploaded with bid
GSTIN Certificate
Experience certificates (if applicable)
OEM authorization (if required)
Financial statements (as requested by bidder)
Frequently Asked Questions
Key insights about KARNATAKA tender market
How to bid for the drone frame tender in Bengaluru 2026?
Bidders must submit GSTIN, PAN, canceled cheque, EFT mandate, and a product data sheet with bid. The tender requires RTK GNSS and 6_axis frame specifications, 12S–14S battery compatibility, and 860‑930 MHz telemetry. Ensure OEM authorizations if applicable and align with HAL Bengaluru delivery terms.
What documents are required for the drone frame procurement in Karnataka?
Required documents include GST certificate, PAN, GSTIN copy, canceled cheque, EFT mandate, and data sheet. OEM authorizations are needed if the model is OEM-specific, plus experience certificates or financial statements as per tender rules. Data sheets must reflect offered parameters precisely.
What are the key technical specs for the 6_axis Indigenous drone frame?
Key specs include wheelbase 1680 mm, 100 KV BLDC motors, 30 inch propellers, 12S–14S Li-ion compatibility, inbuilt ESC, RTK GNSS with Beidou/Galileo/GLONASS, HD video link, 3_axis EO gimbal with 10x zoom, and 860–930 MHz telemetry. Ensure data sheet matches these parameters.
When is the delivery deadline for HAL Bengaluru drone frame order?
Delivery terms specify installation and commissioning at HAL Bengaluru Army Base Workshop. The option clause allows quantity adjustments up to 50%, with delivery timelines calculated accordingly; ensure alignment with original delivery period and extended period rules.
What are the GST and payment terms for this Army drone frame tender?
GST reimbursements are at actuals or applicable rates, whichever is lower; bidder must provide GST certificate and EFT mandate. Payment terms reflect this GST treatment and require billing that aligns with delivered quantities and verified data sheets.
What is the EMD amount and its payment method for the drone frame bid?
The bid security/deposit is ₹75,182. The tender requires submission of EMD via a specified method, along with PAN, GSTIN, and bank-certified EFT mandate; ensure the EMD is valid through the bid submission and evaluation period.
What are the GPS/RF resilience requirements for this drone frame?
Bidder must demonstrate hardware capable of GPS-denied and RF-denied operation. The frame includes RTK GNSS with Beidou/Galileo/GLONASS and long-range telemetry in ISM bands; provide documentation verifying resilience and testing results for these conditions.
What is the role of the data sheet in this drone frame bid?
Data sheets must exactly reflect offered parameter specifications. Any mismatch can lead to bid rejection. Include full BOM alignment, performance metrics, and compatibility with 12S–14S packs, 30 inch props, and 1680 mm wheelbase to ensure verification.