TenderDekho Logo
GEM

Procurement Opportunity: Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush in SOUTH ANDAMAN, ANDAMAN & NICOBAR

Bid Publish Date

24-Jun-2025, 5:22 pm

Bid End Date

15-Jul-2025, 6:00 pm

EMD

₹2,24,000

Value

₹74,81,827

Location

SOUTH ANDAMANS , ANDAMAN & NICOBAR

Progress

Issue24-Jun-2025, 5:22 pm
Technical15-07-2025 15:42:09
Financial
AwardCompleted
Explore all 4 tabs to view complete tender details

Quantity

707

Category

Chair writing.

Bid Type

Two Packet Bid

Categories 64

FABRIC PARTICLE BOARD RUBBER FENDER DOORS ARMS MILD STEEL PIPE BOOK CASE TEXTURE ANALYSER WOODEN FURNITURE MOLECULAR BIOLOGY REAGENTS EXECUTIVE CHAIR PLY WOOD PAINTING FORESTRY PRODUCTS ALMIRAH WASHERS WOODEN TROLLEY SOFA SET TIME LOCKS MS PIPE AIR CYLINDERS BAMBOO RAILS LABORATORY CHEMICAL BOX ENAMELING PAINTS AND ACCESSORIES LAWN SOFA SPRAYER CANVASES AND FILMS AND BOARDS COMPRESSED BOARD HARDWARE AND FASTENERS PLYWOOD FERROUS ALLOY SUPPLY WOODEN BOARD DISTEMPER ADHESIVE CUSHION WOODEN PRODUCT PAINTS AND PRIMERS FIBERS THREADS AND YARNS WALNUT CABINET TRANSITION METALS WOOD SUPPLY LABORATORY MATERIAL PINS DIAMONDS PLASTIC GAUGE MS PIPE LINE BED STOMACHERS SCREWS INSULATING COMPONENT FURNITURE ITEMS PAINT SUPPLY PAINTS TABLES BUFFERS VENETIAN BLIND CLEAT PAINTING MATERIAL WOODEN PLANK

Indian Army has released a public tender for Almirah large steel with shelves, Almirah small steel with shelves, Chair Computer, Chair Visitor cushioned with Arms, Chair Easy with Cushion, Chair Revolving executive, Chair Plastic moulded with Arms and with Cushion, Chair dining JCOs Ors, Chair writing. , Charpoy IP with hard top, Chair 3 Seater with Arm and Back, Locker Bed Side Steel. , Sofa set 4 Seater. , Sofa set 5 Seater. , Conference Table 14 Person, Table office Clk Steel. , Table dining 6 pers. , Table dining 4 pers. , Peg table, Table Writing. , Teapoy in SOUTH ANDAMAN, ANDAMAN & NICOBAR. Quantity: 707. Submission Deadline: 15-07-2025 18: 00: 00. Download documents and apply online.

Documents 5

GeM-Bidding-7959212.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Almirah Large steel with shelves,Almirah Med steel with shelves,Locker movable steel,Almirah Large

Indian Army

PORBANDAR, GUJARAT

Posted: 21 January 2025
Closed: 11 February 2025
GEM

Indian Army Furniture Procurement Tender 2026: Almirah, Tables, Chairs and PVC Accessories - ISI/IS 550 Standards 2026

Indian Army

HISAR, HARYANA

Posted: 17 January 2026
Closed: 27 January 2026
GEM

Almirah large steel with shelves,Almirah medium steel with shelves,Bed hard steel MAP,Book case ste

Indian Army

ERNAKULAM, KERALA

Posted: 25 April 2025
Closed: 17 May 2025
GEM

Indian Army Chair & Steel Almirah Procurement Panchkula Haryana 2025 ISO 9001 BIS Type Test

Indian Army

PANCHKULA, HARYANA

Posted: 24 December 2025
Closed: 3 January 2026
GEM

Chair Computer,Table Computer,Side rack with tray steel,Almirah large steel with shelves,Almirah sm

Indian Army

THANE, MAHARASHTRA

Posted: 24 June 2025
Closed: 15 July 2025
GEM

Bill of Quantities (BOQ) 21 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Almirah large steel with shelves Almirah large steel with shelves. 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with (shade of TA grey colour or as approved GE both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1031 60 nos bsohaddoportb@1 100
2 Almirah small steel with shelves Almirah small steel with shelves. 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with (shade of TA gray colour or as approved GE both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge. Drg No FD-1032 55 nos bsohaddoportb@1 100
3 Chair Computer Chair Computer. As per trade pattern and directed by Enginer-in-Charge .Drg No TP 10 nos bsohaddoportb@1 100
4 Chair Visitor cushioned with Arms Chair Visitor cushioned with Arms. As per Trade patern and directed by Enginer-in-Charge. 4 nos bsohaddoportb@1 100
5 Chair Easy with Cushion Chair Easy with Cushion. All wood shall seasoned first class teak wood free from knots and defects hard nylon buffers shall be fixed at the bottom of legs with brass screws Seat & Back shall be made by 12mm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE. All exposed wooden surface shall be finished with french polish in light walnut shade or as approved by GE. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-358 23 nos bsohaddoportb@1 100
6 Chair Revolving executive Chair Revolving executive. As per trade pattern and directed by Enginer-in-Charge. 4 nos bsohaddoportb@1 100
7 Chair Plastic moulded with Arms and with Cushion Chair Plastic moulded with Arms and with Cushion (Ornate). As per trade pattern and directed by Enginer-in-Charge. 10 nos bsohaddoportb@1 100
8 Chair dining JCOs Ors Chair dining JCOs/ORs. All wood shall seasoned first class teak wood free from knots and defects.Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. Readymade PVC seat 4 mm thick with holes shall be screwed with rails after providing one additional support of 25 x 25 mm Stiffner between and parallel to front and back rail,rest on side rail. All wooden surface shall be french polished with glossy finish, shade as approved by GE. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.Drg No FD/MAP-II/05 27 nos bsohaddoportb@1 100
9 Chair writing. Chair writing. The frame of the chair shall be of 16 gauge 25mm dia MS tubular frame powder coated. Back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lippling alround shall be provided at seat and back. Arm rest shall be of black integral skin poly urethane with shore A hardness and reinforced with MS insert. It shall be scratch and wheather resistant. Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. Rest all as specified / shown in drawing and directed by Engineer-in-Charge.Drg No FD/E6/MAP/12 89 nos bsohaddoportb@1 100
10 Charpoy IP with hard top Charpoy IP with hard top. Long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle MS pipe.Stifners shall be 25 mm 16 gauge square MS pipe. Legs shall be 32 mm 16 gauge square MS pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood BWR type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut & washers. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD/MAP-II/01 95 nos bsohaddoportb@1 100
11 Chair 3 Seater with Arm and Back Chair 3 Seater with Arm and Back. 10 nos bsohaddoportb@1 100
12 Locker Bed Side Steel. Locker Bed Side Steel. 1mm thick MS sheet shall be used to manufacture locker except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, Locker shall be fitted with ISI marked 75mm 6 lever lock with three way locking system (Make of lock -Harrison/Link/Godrej). Front shutters shall have two leaves of equal size. Locker shall be finished with (shade of TA gray colour or as approved GE both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1029 70 nos bsohaddoportb@1 100
13 Sofa set 4 Seater. Sofa set 4 Seater. The set consist of one long piece of two seater and two small pieces of single seater. All timber work shall be first class seasoned teak wood free from knots/defects. Cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric/tapestry cloth composition of 65% polyester & 35% cotton or as approved by GE and make of cushion shall be kurlon/sleepwell. All the wooden joints shall be fixed with bamboo pins and nails shall not be used. All exposed wooden surface shall be finished with Deco polish in light walnut shade or as approved by GE. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.Drg No FD-281 16 set bsohaddoportb@1 100
14 Sofa set 5 Seater. Sofa set 5 Seater. The set consist of one long piece of three seater and two small pieces of single seater. As per trade pattern. 1 set bsohaddoportb@1 100
15 Conference Table 14 Person Conference Table 14 Person. As per trade pattern Eco moudler of Godrej.Drg No TP 2 nos bsohaddoportb@1 100
16 Table office Clk Steel. Table office Clk Steel. Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by BSO/GE, duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive(Fevicol SH). with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1004 25 nos bsohaddoportb@1 100
17 Table dining 6 pers. Table dining 6 pers. All wooden part shall be first class seasoned teak wood free from knots and defects. Hard rubber/nylon buffers shall be fixed at the bottom of legs with brass screws, Top shall be 18mm thick exterior grade MDF board one side laminated shade as approved by GE, duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol SH) 8 Nos of L-shape corner of flat iron 5mm thick 4 x 4 inch between legs and rail to be fixed with screw. All wooden surface shall be french polished with glossy finish shade as approved by GE Rest. all as specified/ Shown in drawing and directed by Enginer-in-Charge. Drg No FD/MAP-II/03 20 nos bsohaddoportb@1 100
18 Table dining 4 pers. Table dining 4 pers. All wooden part shall be first class seasoned teak wood free from knots and defects. Hard rubber/nylon buffers shall be fixed at the bottom of legs with brass screws, Top shall be 18mm thick exterior grade MDF board one side laminated shade as approved by GE, duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol SH) 8 Nos of L-shape corner of flat iron 5mm thick 4 x 4 inch between legs and rail to be fixed with screw. All wooden surface shall be french polished with glossy finish shade as approved by GE Rest. all as specified/ Shown in drawing and directed by Enginer-in-Charge.Drg No FD/MAP-II/03 33 nos bsohaddoportb@1 100
19 Peg table Peg table. All wood shall seasoned first class teak wood free from knots and defects. Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. H Type leg stiffeners shall be provided for better support. Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). All wood surfaces shall be french polished with high glossy finish. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-384 68 nos bsohaddoportb@1 100
20 Table Writing. Table Writing. All wood shall be of seasoned 1st class hardwood teakwood. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. Top of tables shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging all round the top of table. Two short stiffeners of teakwood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawers and cabinet shall be 18mm thick pre-laminated particle board exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6mm thick plywood commercial 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. Rest. all as specified/ Shown in drawing and directed by Enginer-in-Charge.Drg No FD-275 28 nos bsohaddoportb@1 100
21 Teapoy Teapoy. The leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. Top rail of teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber PVC rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. Top of the table shall be of 18mm thick pre laminated MDF boar exterior grade of approved shade with 4mm thick teak wood beading all round the edges of top. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.Drg No FD-382 57 nos bsohaddoportb@1 100

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

6

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Results

S.No Seller Item Date Status
1100KEYS TRADECOM PRIVATE LIMITED   Under PMA-15-07-2025 15:42:09Qualified
2ESTEEM360 ZONE PRIVATE LIMITED   Under PMA-14-07-2025 14:31:35Disqualified
3FABASIAN INDUSTRIES PRIVATE LIMITED   Under PMA-02-07-2025 11:55:06Disqualified
4HEMKUND STEEL INDUSTRY   Under PMA-15-07-2025 16:48:06Disqualified
5I G ENTERPRISES   Under PMA-11-07-2025 18:45:26Disqualified
6M/S JAINCO   Under PMA-15-07-2025 16:04:54Disqualified
7M/s Srinathji Industries Port Blair   Under PMA-15-07-2025 10:44:46Qualified
8M/s.SUSANTA ENTERPRISES AND SUSANTA FURNITURE WORKS   Under PMA-15-07-2025 16:11:59Qualified
9Mansarover Industrial Corporation   Under PMA-15-07-2025 17:20:56Qualified
10SALCON ENGINEERS AND FABRICATORS   Under PMA-15-07-2025 14:11:24Qualified
11TIRUPATI TRADING COMPANY   Under PMA-15-07-2025 17:55:51Qualified

Financial Results

Rank Seller Price Item
L1100KEYS TRADECOM PRIVATE LIMITED(MSE,MII)( MSE Social Category:OBC )    Under PMA₹69,10,284Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
L2SALCON ENGINEERS AND FABRICATORS (MSE,MII)( MSE Social Category:General )    Under PMA₹71,70,700Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
L3TIRUPATI TRADING COMPANY (MSE,MII)( MSE Social Category:General )    Under PMA₹76,25,400Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
L4M/s Srinathji Industries Port Blair (MSE,MII)( MSE Social Category:General )    Under PMA₹76,44,745Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
L5M/s.SUSANTA ENTERPRISES AND SUSANTA FURNITURE WORKS (MSE,MII)( MSE Social Category:General )    Under PMA₹77,45,735Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush
L6Mansarover Industrial Corporation (MSE,MII)( MSE Social Category:General )    Under PMA₹88,92,660Item Categories : Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush

Frequently Asked Questions

Key insights about ANDAMAN & NICOBAR tender market

What are the eligibility requirements for participation in this tender?

The eligibility requirements include being a registered entity, having previous experience in similar repair projects, and demonstrating compliance with military standards through relevant documentation.

What technical specifications must contractors meet for furniture repairs?

Contractors are required to meet technical specifications set by military standards regarding materials and methods employed in furniture repair. Comprehensive documentation outlining these methods and material types must accompany the submission.

What are the financial security requirements for this tender?

Bidders must provide financial statements or bank solvency certificates to prove their financial stability. This ensures that they can handle project costs and adhere to proposed budgets.

How should bids be submitted, and what formats are accepted?

Bids must be submitted electronically via the designated submission portal. It is crucial to adhere to the specified document formats suggested in the tender documentation, which generally includes PDF and Word formats.

Are there benefits for MSEs and Startups in this tender?

Yes, the tender includes special provisions for Micro, Small, and Medium Enterprises (MSEs) and Startups, offering them relaxed financial criteria and encouraging their participation in the bid process.