Combination Plier eight inch,Nipper Plier,Screw Driver Set Taparia,Snake Eye Screw two point five m
Indian Army
MEERUT, UTTAR PRADESH
Posted:
13 May 2025
Closed:
3 June 2025
GEM
GEM
Indian Air Force TORQUE WRENCH, SOCKET SET & ACCESSORIES Tender KACHCHH Gujarat 2026 - IS 550 / ISO 9001 Standards
Progress
Issue11-Jun-2026, 8:52 pm
AwardPending
Quantity
61
Category
TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE
Bid Type
Two Packet Bid
Categories
25
NETWORK GATEWAY INDUCTION MOTORS DIAL GAUGE TOOL KIT INTERIOR SLEEVE ANEROID BLOOD PRESSURE UNIT GAUGE INOCULATING DEVICES DIAL INDICATOR INDICATING AND RECORDING INSTRUMENTS MEASURING INSTRUMENT ROUTER SOCKET FEELER GAUGE AUTOMOTIVE TOOL NETWORKING COMPONENT WRENCH AGRICULTURE EQUIPMENT MEASURING EQUIPMENT NETWORKING EQUIPMENTS DC MOTOR BLADE COUNTER WRENCHES AND DRIVERS
Tender Overview
The Indian Air Force, Department of Military Affairs, invites bids for a broad range of hand tools and torque-related equipment including TORQUE WRENCH (1/2 in drive up to 175 ft-lb), 1/4 in drive sockets, multi-piece wrench sets, pliers, screwdriver kits, feeler gauges, dial gauge accessories, and ancillary items listed under a 37-item BOQ. Estimated contract value is ₹228,256 with delivery to AIRFORCE STATION NALIYA, ABDASA NALIYA, KUTCH, GUJARAT 370655. Scope is strictly “Supply of Goods” with required after-sales service, installation/commissioning if applicable, and a 2-year warranty. The delivery schedule may include a quantity uplift of up to 25% during contract execution, at original rates, with minimum 30 days additional time if required. The purchaser reserves options for extended delivery periods and partial fulfillment tied to the option clause. This tender emphasizes OEM/brand compliance, AS/NZS or IS standards, and a robust after-sales network in INDIA.
Technical Specifications & Requirements
- Product categories include: TORQUE WRENCH (1/2 in drive, 175 ft-lb limit), 3/8 and 1/4 in drive sockets, 12-point and deep socket sets, pliers (slip-joint, needle-nose), screwdriver sets, feeler gauges, dial gauges, router/diamond grind components, and various combination tool sets.
- Delivery location: AIRFORCE STATION NALIYA, KUTCH, GUJARAT. Installation/commissioning may be required; OEM warranty certificates must be included on delivery. Warranty period: 2 years from final acceptance or after commissioning, whichever is applicable. Specific standards referenced include IS/ISO-related quality expectations and OEM service support networks in INDIA.
- Special Clauses: Option clause permits ±25% quantity variation; delivery timelines commence from last delivery order date; post-order extension rules apply with minimum 30 days. Documentation includes upload of ATC-compliant certificates and OEM authorizations.
Terms, Conditions & Eligibility
- EMD: Not explicitly stated; bidders must ensure submission of required security as per ATC.
- Warranty: 2-year warranty with on-site service and escalation to local service centers; OEM warranty certificates required at delivery.
- After-sales: Installation, commissioning, training, and troubleshooting capabilities must be documented; service centers proximity to consignee destinations must be provided.
- Documentation: All certificates demanded in the 24/27 Bid document, ATC and Corrigendum must be uploaded; ink-signed and stamped ATC documents required at bid submission.
- Delivery terms: Supply-only; delivery to Naliya station; extended delivery based on option clause may apply with minimum 30 days additional time.
Key Specifications
-
Torque Wrench: 1/2 inch drive, range up to 175 ft-lb (dash format present in description)
-
Socket sets: 1/4 inch and 3/8 inch drives, deep and standard sockets, 12-point configurations
-
Pliers: Slip Joint and Needle Nose, heavy duty construction
-
Screwdriver sets: Flat and Phillips, multiple pieces
-
Feeler gauges, dial gauge accessories, bit sockets, hex key sets
-
Warranty: 2 years from acceptance or commissioning date; OEM warranty certificates required
-
Delivery: Station Logistics Unit at Naliya, Gujarat; installation/commissioning may be included
Terms & Conditions
-
Option clause allows ±25% quantity variation at contract rates
-
Delivery period commences from last date of original delivery order
-
2-year warranty with OEM service network in INDIA
Important Clauses
Payment Terms
Not explicitly stated in available data; standard terms apply per ATC with supply-only scope
Delivery Schedule
Delivery period may be extended using option clause; minimum 30 days for any additional time
Penalties/Liquidated Damages
Not specified in provided data; penalties would be defined in ATC
Bidder Eligibility
-
Experience in supply of hand tool kits and torque equipment to government organizations
-
Demonstrable OEM authorization for listed product categories
-
Financial capability to support ₹228,256 estimated value and potential quantity variations
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE , ONE BY TWO INCH DRIVE RATCHET HANDLE , SOLDER SLEEVE REFLECTOR , WRENCH SET O AND R FOURTEEN PIECES THREE BY EIGHT INCH ELEVEN BY FOUR INCH , ADAPTER SOCKET THREE BY EIGHT INCH INTO ONE BY FOUR INCH , TORQUE METER TWENTY TEN NEWTON METRE , FOUR MILIMETER SOCKET ONE BY FOUR INCH DRIVE , ONE BY FOUR INCH FIVE POINT FIVE MILIMETER SOCKET , ONE BY FOUR INCH LONG SHANK DRIVE , ONE BY FOUR INCH DRIVE UNIVERSAL JOINT , ONE BY FOUR SLIDING KEY HANDLE , COUNTER SINK FIVE BY EIGHT MULTIPLY ONE BY EIGHT INCH HUNDRED DEG ONE BY FOUR MULTIPLY TWENTY EIGHT N , TORQUE WRENCH ONE BY TWO INCH DRIVE ZERO DASH ONE SEVENTY FIVE FL DASH LB , ONE BY FOUR INCH DRIVE SOCKET SET TWELVE POINT , PLIER SLIP JOINT SEVEN POINT FIVE INCH HEAVY DUTY , SOCKET EXTERNAL HEX LONG FIVE MM , SOCKET EXTERNAL HEX LONG SIX MM , PLIER INTERIOR SET , BIT SOCKET SET , FEELER GAUGE , KNIFE , DRILL THREE POINT THREE MM , DRILL ST FT SC FOUR MM , DIAL GAUGE ZERO DASH TEN MM , TORQUE METER , ROUTER DIAMOND GRIND , WRENCH SET COMBINATION TWELVE PT FOURTEEN PIECES , SCREW DRIVER FLAT TIP THIRTY CENTIMETER LONG SIX POINT FIVE MM BLADE , SD COMBINATION FLAT SEVEN PHILIPS SIX PIECES , SD COMBINATION FLAT SEVEN PHILIPS EIGHT PIECES , TORQUE WRENCH THREE BY EIGHT THREE POINT TWO DASH THREE POINT SIX IN IB , SOCKET DEEP THREE BY EIGHT DRIVE SIX PT FIFTEEN BY SIXTEEN INCH , BIT SOCKET TEMPER PROOF , KEY SET HEX NINE PIECES ONE POINT FIVE DASH TEN MM , NEEDLE NOSE PLIER , TORQUE WRENCH CLICK TYPE , SOCKET DEEP EIGHTEEN MM SIX POINT THREE BY EIGHT IN
Authority Records
MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 5
GeM-Bidding-9457269.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Nose Plier Six Inch,Side Cutting Plier Six Inch,Cable Cutter Two hundred Forty MM,Multi Purpose Wir
Indian Army
MEERUT, UTTAR PRADESH
Posted:
11 August 2025
Closed:
23 August 2025
GEM
Ring spanner set 12 Psc,DE spanner set 12 Psc,Socket set,Circlip plier inner 1442 dash 7C,Circlip p
Border Security Force (bsf)
COOCH BEHAR, WEST BENGAL
Posted:
10 November 2025
Closed:
1 December 2025
GEM
SQ-DR SALERT SIZE 6BA,SOCKET SPANNER SD 4BA,KEY WRENCH HEX AF,SPANNER OJ DE 38X44,TORQUE WRENCH 100
Indian Navy
UTTARA KANNADA, KARNATAKA
Posted:
25 June 2025
Closed:
19 July 2025
GEM
Indian Army Tools & Workshop Equipment Tender Meghalaya RI Bhoi 2025 - IS 550, ISO, AAA/TRTL Compliant
Indian Army
RI BHOI, MEGHALAYA
Posted:
6 December 2025
Closed:
16 December 2025
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
37 Items Sign in to view GEM price trends Sign in for GEM prices
#1
TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE
TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE
2 each
Delivery: 45 days
#2
ONE BY TWO INCH DRIVE RATCHET HANDLE
ONE BY TWO INCH DRIVE RATCHET HANDLE
1 each
Delivery: 45 days
#3
SOLDER SLEEVE REFLECTOR
SOLDER SLEEVE REFLECTOR
2 each
Delivery: 45 days
#4
WRENCH SET O AND R FOURTEEN PIECES THREE BY EIGHT INCH ELEVEN BY FOUR INCH
WRENCH SET O AND R FOURTEEN PIECES THREE BY EIGHT INCH ELEVEN BY FOUR INCH
1 each
Delivery: 45 days
#5
ADAPTER SOCKET THREE BY EIGHT INCH INTO ONE BY FOUR INCH
ADAPTER SOCKET THREE BY EIGHT INCH INTO ONE BY FOUR INCH
1 each
Delivery: 45 days
#6
TORQUE METER TWENTY TEN NEWTON METRE
TORQUE METER TWENTY TEN NEWTON METRE
2 each
Delivery: 45 days
#7
FOUR MILIMETER SOCKET ONE BY FOUR INCH DRIVE
FOUR MILIMETER SOCKET ONE BY FOUR INCH DRIVE
2 each
Delivery: 45 days
#8
ONE BY FOUR INCH FIVE POINT FIVE MILIMETER SOCKET
ONE BY FOUR INCH FIVE POINT FIVE MILIMETER SOCKET
1 each
Delivery: 45 days
#9
ONE BY FOUR INCH LONG SHANK DRIVE
ONE BY FOUR INCH LONG SHANK DRIVE
1 each
Delivery: 45 days
#10
ONE BY FOUR INCH DRIVE UNIVERSAL JOINT
ONE BY FOUR INCH DRIVE UNIVERSAL JOINT
1 each
Delivery: 45 days
#11
ONE BY FOUR SLIDING KEY HANDLE
ONE BY FOUR SLIDING KEY HANDLE
1 each
Delivery: 45 days
#12
COUNTER SINK FIVE BY EIGHT MULTIPLY ONE BY EIGHT INCH HUNDRED DEG ONE BY FOUR MULTIPLY TWENTY EIGHT N
COUNTER SINK FIVE BY EIGHT MULTIPLY ONE BY EIGHT INCH HUNDRED DEG ONE BY FOUR MULTIPLY TWENTY EIGHT N
2 each
Delivery: 45 days
#13
TORQUE WRENCH ONE BY TWO INCH DRIVE ZERO DASH ONE SEVENTY FIVE FL DASH LB
TORQUE WRENCH ONE BY TWO INCH DRIVE ZERO DASH ONE SEVENTY FIVE FL DASH LB
2 each
Delivery: 45 days
#14
ONE BY FOUR INCH DRIVE SOCKET SET TWELVE POINT
ONE BY FOUR INCH DRIVE SOCKET SET TWELVE POINT
1 each
Delivery: 45 days
#15
PLIER SLIP JOINT SEVEN POINT FIVE INCH HEAVY DUTY
PLIER SLIP JOINT SEVEN POINT FIVE INCH HEAVY DUTY
1 each
Delivery: 45 days
#16
SOCKET EXTERNAL HEX LONG FIVE MM
SOCKET EXTERNAL HEX LONG FIVE MM
1 each
Delivery: 45 days
#17
SOCKET EXTERNAL HEX LONG SIX MM
SOCKET EXTERNAL HEX LONG SIX MM
1 each
Delivery: 45 days
#18
PLIER INTERIOR SET
PLIER INTERIOR SET
1 each
Delivery: 45 days
#19
BIT SOCKET SET
BIT SOCKET SET
1 each
Delivery: 45 days
#20
FEELER GAUGE
FEELER GAUGE
2 each
Delivery: 45 days
#21
KNIFE
KNIFE
3 each
Delivery: 45 days
#22
DRILL THREE POINT THREE MM
DRILL THREE POINT THREE MM
5 each
Delivery: 45 days
#23
DRILL ST FT SC FOUR MM
DRILL ST FT SC FOUR MM
3 each
Delivery: 45 days
#24
DIAL GAUGE ZERO DASH TEN MM
DIAL GAUGE ZERO DASH TEN MM
2 each
Delivery: 45 days
#25
TORQUE METER
TORQUE METER
2 each
Delivery: 45 days
#26
ROUTER DIAMOND GRIND
ROUTER DIAMOND GRIND
2 each
Delivery: 45 days
#27
WRENCH SET COMBINATION TWELVE PT FOURTEEN PIECES
WRENCH SET COMBINATION TWELVE PT FOURTEEN PIECES
1 each
Delivery: 45 days
#28
SCREW DRIVER FLAT TIP THIRTY CENTIMETER LONG SIX POINT FIVE MM BLADE
SCREW DRIVER FLAT TIP THIRTY CENTIMETER LONG SIX POINT FIVE MM BLADE
3 each
Delivery: 45 days
#29
SD COMBINATION FLAT SEVEN PHILIPS SIX PIECES
SD COMBINATION FLAT SEVEN PHILIPS SIX PIECES
2 each
Delivery: 45 days
#30
SD COMBINATION FLAT SEVEN PHILIPS EIGHT PIECES
SD COMBINATION FLAT SEVEN PHILIPS EIGHT PIECES
2 each
Delivery: 45 days
#31
TORQUE WRENCH THREE BY EIGHT THREE POINT TWO DASH THREE POINT SIX IN IB
TORQUE WRENCH THREE BY EIGHT THREE POINT TWO DASH THREE POINT SIX IN IB
2 each
Delivery: 45 days
#32
SOCKET DEEP THREE BY EIGHT DRIVE SIX PT FIFTEEN BY SIXTEEN INCH
SOCKET DEEP THREE BY EIGHT DRIVE SIX PT FIFTEEN BY SIXTEEN INCH
1 each
Delivery: 45 days
#33
BIT SOCKET TEMPER PROOF
BIT SOCKET TEMPER PROOF
1 each
Delivery: 45 days
#34
KEY SET HEX NINE PIECES ONE POINT FIVE DASH TEN MM
KEY SET HEX NINE PIECES ONE POINT FIVE DASH TEN MM
1 each
Delivery: 45 days
#35
NEEDLE NOSE PLIER
NEEDLE NOSE PLIER
1 each
Delivery: 45 days
#36
TORQUE WRENCH CLICK TYPE
TORQUE WRENCH CLICK TYPE
2 each
Delivery: 45 days
#37
SOCKET DEEP EIGHTEEN MM SIX POINT THREE BY EIGHT IN
SOCKET DEEP EIGHTEEN MM SIX POINT THREE BY EIGHT IN
1 each
Delivery: 45 days
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE | TORQUE WRENCH FIVE TO SIXTY FIVE NEWTON METRE | 2 | each | logistics49 | 45 | |
| 2 | ONE BY TWO INCH DRIVE RATCHET HANDLE | ONE BY TWO INCH DRIVE RATCHET HANDLE | 1 | each | logistics49 | 45 | |
| 3 | SOLDER SLEEVE REFLECTOR | SOLDER SLEEVE REFLECTOR | 2 | each | logistics49 | 45 | |
| 4 | WRENCH SET O AND R FOURTEEN PIECES THREE BY EIGHT INCH ELEVEN BY FOUR INCH | WRENCH SET O AND R FOURTEEN PIECES THREE BY EIGHT INCH ELEVEN BY FOUR INCH | 1 | each | logistics49 | 45 | |
| 5 | ADAPTER SOCKET THREE BY EIGHT INCH INTO ONE BY FOUR INCH | ADAPTER SOCKET THREE BY EIGHT INCH INTO ONE BY FOUR INCH | 1 | each | logistics49 | 45 | |
| 6 | TORQUE METER TWENTY TEN NEWTON METRE | TORQUE METER TWENTY TEN NEWTON METRE | 2 | each | logistics49 | 45 | |
| 7 | FOUR MILIMETER SOCKET ONE BY FOUR INCH DRIVE | FOUR MILIMETER SOCKET ONE BY FOUR INCH DRIVE | 2 | each | logistics49 | 45 | |
| 8 | ONE BY FOUR INCH FIVE POINT FIVE MILIMETER SOCKET | ONE BY FOUR INCH FIVE POINT FIVE MILIMETER SOCKET | 1 | each | logistics49 | 45 | |
| 9 | ONE BY FOUR INCH LONG SHANK DRIVE | ONE BY FOUR INCH LONG SHANK DRIVE | 1 | each | logistics49 | 45 | |
| 10 | ONE BY FOUR INCH DRIVE UNIVERSAL JOINT | ONE BY FOUR INCH DRIVE UNIVERSAL JOINT | 1 | each | logistics49 | 45 | |
| 11 | ONE BY FOUR SLIDING KEY HANDLE | ONE BY FOUR SLIDING KEY HANDLE | 1 | each | logistics49 | 45 | |
| 12 | COUNTER SINK FIVE BY EIGHT MULTIPLY ONE BY EIGHT INCH HUNDRED DEG ONE BY FOUR MULTIPLY TWENTY EIGHT N | COUNTER SINK FIVE BY EIGHT MULTIPLY ONE BY EIGHT INCH HUNDRED DEG ONE BY FOUR MULTIPLY TWENTY EIGHT N | 2 | each | logistics49 | 45 | |
| 13 | TORQUE WRENCH ONE BY TWO INCH DRIVE ZERO DASH ONE SEVENTY FIVE FL DASH LB | TORQUE WRENCH ONE BY TWO INCH DRIVE ZERO DASH ONE SEVENTY FIVE FL DASH LB | 2 | each | logistics49 | 45 | |
| 14 | ONE BY FOUR INCH DRIVE SOCKET SET TWELVE POINT | ONE BY FOUR INCH DRIVE SOCKET SET TWELVE POINT | 1 | each | logistics49 | 45 | |
| 15 | PLIER SLIP JOINT SEVEN POINT FIVE INCH HEAVY DUTY | PLIER SLIP JOINT SEVEN POINT FIVE INCH HEAVY DUTY | 1 | each | logistics49 | 45 | |
| 16 | SOCKET EXTERNAL HEX LONG FIVE MM | SOCKET EXTERNAL HEX LONG FIVE MM | 1 | each | logistics49 | 45 | |
| 17 | SOCKET EXTERNAL HEX LONG SIX MM | SOCKET EXTERNAL HEX LONG SIX MM | 1 | each | logistics49 | 45 | |
| 18 | PLIER INTERIOR SET | PLIER INTERIOR SET | 1 | each | logistics49 | 45 | |
| 19 | BIT SOCKET SET | BIT SOCKET SET | 1 | each | logistics49 | 45 | |
| 20 | FEELER GAUGE | FEELER GAUGE | 2 | each | logistics49 | 45 | |
| 21 | KNIFE | KNIFE | 3 | each | logistics49 | 45 | |
| 22 | DRILL THREE POINT THREE MM | DRILL THREE POINT THREE MM | 5 | each | logistics49 | 45 | |
| 23 | DRILL ST FT SC FOUR MM | DRILL ST FT SC FOUR MM | 3 | each | logistics49 | 45 | |
| 24 | DIAL GAUGE ZERO DASH TEN MM | DIAL GAUGE ZERO DASH TEN MM | 2 | each | logistics49 | 45 | |
| 25 | TORQUE METER | TORQUE METER | 2 | each | logistics49 | 45 | |
| 26 | ROUTER DIAMOND GRIND | ROUTER DIAMOND GRIND | 2 | each | logistics49 | 45 | |
| 27 | WRENCH SET COMBINATION TWELVE PT FOURTEEN PIECES | WRENCH SET COMBINATION TWELVE PT FOURTEEN PIECES | 1 | each | logistics49 | 45 | |
| 28 | SCREW DRIVER FLAT TIP THIRTY CENTIMETER LONG SIX POINT FIVE MM BLADE | SCREW DRIVER FLAT TIP THIRTY CENTIMETER LONG SIX POINT FIVE MM BLADE | 3 | each | logistics49 | 45 | |
| 29 | SD COMBINATION FLAT SEVEN PHILIPS SIX PIECES | SD COMBINATION FLAT SEVEN PHILIPS SIX PIECES | 2 | each | logistics49 | 45 | |
| 30 | SD COMBINATION FLAT SEVEN PHILIPS EIGHT PIECES | SD COMBINATION FLAT SEVEN PHILIPS EIGHT PIECES | 2 | each | logistics49 | 45 | |
| 31 | TORQUE WRENCH THREE BY EIGHT THREE POINT TWO DASH THREE POINT SIX IN IB | TORQUE WRENCH THREE BY EIGHT THREE POINT TWO DASH THREE POINT SIX IN IB | 2 | each | logistics49 | 45 | |
| 32 | SOCKET DEEP THREE BY EIGHT DRIVE SIX PT FIFTEEN BY SIXTEEN INCH | SOCKET DEEP THREE BY EIGHT DRIVE SIX PT FIFTEEN BY SIXTEEN INCH | 1 | each | logistics49 | 45 | |
| 33 | BIT SOCKET TEMPER PROOF | BIT SOCKET TEMPER PROOF | 1 | each | logistics49 | 45 | |
| 34 | KEY SET HEX NINE PIECES ONE POINT FIVE DASH TEN MM | KEY SET HEX NINE PIECES ONE POINT FIVE DASH TEN MM | 1 | each | logistics49 | 45 | |
| 35 | NEEDLE NOSE PLIER | NEEDLE NOSE PLIER | 1 | each | logistics49 | 45 | |
| 36 | TORQUE WRENCH CLICK TYPE | TORQUE WRENCH CLICK TYPE | 2 | each | logistics49 | 45 | |
| 37 | SOCKET DEEP EIGHTEEN MM SIX POINT THREE BY EIGHT IN | SOCKET DEEP EIGHTEEN MM SIX POINT THREE BY EIGHT IN | 1 | each | logistics49 | 45 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
GST certificate
2
PAN card
3
Experience certificates for similar tool supply
4
Financial statements demonstrating financial capability
5
EMD/Security deposit documentation (as applicable)
6
Technical bid documents and OEM authorization letters
7
OEM warranty certificates
8
INK-SIGNED and STAMPED Buyer Added ATC documents
Frequently Asked Questions
Key insights about GUJARAT tender market
How to bid for the torque wrench and socket set tender in Kachchh Gujarat 2026
Bidders must submit GST, PAN, experience certificates, financials, and OEM authorizations along with ATC-compliant documents. The contract allows a ±25% quantity variation and requires a 2-year warranty with OEM support. Delivery is to AIRFORCE STATION NALIYA, Naliya, Gujarat; ensure installation if included and submit necessary certificates at bid submission.
What documents are required for IAF Naliya tool procurement bid 2026
Required documents include GST registration, PAN, company financials, experience certificates for similar tool supply, OEM authorization letters, technical bid, EMD documentation (as applicable), and ink-signed/ stamped ATC documents. Ensure OEM warranty certificates are provided at delivery.
What are the key technical specifications for torque tools tender in Gujarat
Key specs include a 1/2 inch drive torque wrench up to 175 ft-lb, 12-point socket sets, 1/4 and 3/8 inch drive sockets, pliers (slip-joint and needle-nose), feeler gauges, dial gauge accessories, and corresponding screwdriver kits. Warranties span 2 years with OEM service support in India.
When is the delivery window for the Naliya tool supply contract 2026
Delivery periods can be adjusted per the option clause, with the base delivery extending from the last delivery order date. If additional quantity is ordered, time scales follow (Additional quantity/Original quantity) × Original delivery period, with a minimum of 30 days for extra time.
What is the warranty requirement for IAF Naliya tool procurement
A 2-year warranty is required from the date of final acceptance or after commissioning, whichever occurs later. OEM warranty certificates must accompany delivery, and the seller must provide service centers and repair support within India during the warranty period.
What standards or certifications are required for this IAF tool tender
While specific standard numbers are not fully listed, terms emphasize IS/ISO quality expectations and OEM-authorized products. Bidders should provide IS/ISI or ISO-compliant certified tools where applicable and ensure OEM service networks are documented for after-sales support.
What is the scope of supply for the Indian Air Force tool tender in Gujarat
Scope is limited to the supply of goods (tools and accessories) with possible installation/ commissioning if included in scope. The contract values and item list cover torque wrenches, socket sets, pliers, screwdrivers, feeler gauges, dial gauges, and related accessories within a 37-item BOQ.
How to verify OEM authorization for the Gujarat tool procurement bid
Obtain an OEM authorization letter showing explicit product line approval for torque wrenches, socket sets, and accessories listed in the BOQ. Ensure the authorization is valid for India and that the OEM will provide after-sales support and warranty services at consignees' locations.
Similar Tenders
5 found
Double ended Ring wrench,Double ended Ring wrench,Double ended Ring wrench,Double ended Ring wrench
Bharat Petroleum Corporation Ltd
📍 KOLKATA, WEST BENGAL
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Adjustable spanners,Adjustable spanners,Adjustable spanners,Adjustable spanners,Combination Piers,T
Indian Space Research Organization
📍 THIRUVANANTHAPURAM, KERALA
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
T handle Wrench 1,Tool for Blind Rivent Nuts,Extended Hexagonal Key Size 4,Extended Hexagonal Key S
Indian Air Force
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Digital Distometer Make Skadioo or Bosch,Speedo or Odo Meter for measuring of Road Distance,Road De
Indian Army
📍 MUMBAI, MAHARASHTRA
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Urgent
Indian Army Procurement of Miscellaneous Hardware & Tools Tender 2026 - M Seal, Tape, Screws, Pliers, Jacks ISO Standards
Indian Army
Est: ₹88,393
⏰ Deadline: 7 days left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 5
GeM-Bidding-9457269.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS