TenderDekho Logo
GEM

Indian Army Weld Mesh Panel & Accessories Tender Baramulla 2026 ISI/A5 Standards & G congress 2026

Bid Publish Date

11-Jan-2026, 1:52 pm

Bid End Date

21-Jan-2026, 2:00 pm

EMD

₹1,93,373

Value

₹64,45,794

Location

BARAMULLA , JAMMU AND KASHMIR

Progress

Issue11-Jan-2026, 1:52 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

19626

Category

Galvanised Steel Barbed Wire ISI marked A 5 designation for Galvanised steel barbed wire

Bid Type

Two Packet Bid

Tender Overview

The Indian Army under the Department of Military Affairs invites bids for a broad range of civil-military fencing and construction items, including Weld Mesh Panel with Accessories, Omega Clamp, Mushroom Head Bolt Nut with Washer, Fence Post, Y Arm assemblies for PTCC support, various hand tools, protective gloves, and associated fittings. Estimated value is ₹6,445,794 with an EMD of ₹193,373. Delivery/installation to be conducted at the AOR of 19 Inf Div, Pattan, Baramulla. A key differentiator is the requirement to submit detailed design drawings within 5 days of award and align supply to buyer-approved drawings; delays in approval shift delivery without liquidated damages. The tender emphasizes non-obsolescence (minimum 2 years market life) and GST considerations.

Technical Specifications & Requirements

  • Product scope includes: Weld Mesh Panel with Accessories, Omega Clamp, Mushroom Head Bolt Nut with Washer, Fence Post, Y Arm assemblies (top PTCC support), Intermediate Y Arm, and associated fittings; and a broad list of construction hardware (galvanised wire, barbed wire ISI marked A 5, rapid setting compounds, aggregates 20mm/40mm, binding wire, sand, welding equipment, tools, ladders, PPE, cutting tools, piping, and cementitious products).
  • Standards/labels: ISI marked barbed wire; reference to ISI/IS 383 sand specification; emphasis on non-obsolescence and OEM/brand compliance; drawings approved by buyer before fabrication.
  • Delivery location: AOR of 19 Inf Div, Pattan, Baramulla; installation if covered in scope to be completed at the same site.
  • Experience: bidder or OEM must show 2+ years regular manufacturing/supply to government bodies for similar products.
  • Financials: Estimated value ₹6,445,794; EMD ₹193,373; GST as actual or capped to quoted rate.

Terms, Conditions & Eligibility

  • EMD: ₹193,373; payment terms not stated; GST reimbursement per actuals up to quoted rate.
  • Drawing approvals: Detailed Design Drawings due within 5 days of award; approvals or modification lists provided within 5 days; supply to conform to approved drawings; no LD for buyer-delayed approvals.
  • Delivery: Actual delivery/installation at the specified address; timelines shift with drawing approval delays.
  • Eligibility: bidder must not be in liquidation; provide PAN, GSTIN, cancelled cheque, EFT mandate; End User Certificate as per buyer format; 2+ years government-supply experience for similar category products.
  • Obsolescence: products offered must have at least 2 years residual market life; no end-of-life items.
  • Documentation: End User Certificate, GST, PAN, EFT, contracts for similar work, and non-disclosure declarations as required.

Key Specifications

    • Product scope: Weld Mesh Panel with Accessories; Omega Clamp; Mushroom Head Bolt Nut with Washer; Fence Post; Y Arm components; PTCC support hardware; intermediate arms; fittings; and related hand/tools/ PPE.
    • Standards/marks: ISI marked barbed wire, A 5 designation; IS 383 sand specification; non-obsolescence requirement (>2 years remaining market life).
    • Delivery site: AOR of 19 Inf Div, Pattan, Baramulla; installation if in scope to same location.
    • Experience: bidder or OEM must have supplied similar category products to government bodies for at least 2 years prior to bid opening.

Terms & Conditions

  • Key EMD: ₹193,373; payment terms unspecified; GST as actuals with cap at quoted rate.

  • Drawing approval: 5 days for submission and buyer response; delivery adjusted if approvals delayed.

  • Eligibility: no liquidation; 2+ years govt procurement experience; PAN, GST, EFT mandate, End User Certificate required.

Important Clauses

Payment Terms

GST reimbursement as per actuals or as per applicable rates, whichever is lower, up to quoted GST%.

Delivery Schedule

Delivery and installation (if in scope) at AOR of 19 Inf Div, Pattan, Baramulla; delivery period adjusts with drawing approval timeline; no LD for buyer delay in approvals.

Penalties/Liquidated Damages

Not specified; delivery shifts governed by drawings approval timeline rather than LD.

Bidder Eligibility

  • Not under liquidation, court receivership, or similar proceedings

  • Minimum 2 years of regular govt/PSU supply of similar category products

  • PAN, GSTIN, cancelled cheque, EFT mandate provided with bid

Past Similar Tenders (Historical Results)

5 found

Indian Army Department of Military Affairs Cement Bags and Construction Materials Tender 2025

Indian Army

PITHORAGARH, UTTARAKHAND

Posted: 29 November 2025
Closed: 16 December 2025
GEM

Phawra with wooden handle,Axe picks with handle 3 Kg,Axe felling with handle,Combination Pliers 210

Indian Army

ALMORA, UTTARAKHAND

Posted: 27 November 2025
Closed: 8 December 2025
GEM

Indian Army Ply Board & Allied Items Tender Poonch Jammu & Kashmir 2025 - ISI/ISO Standards Not Specified

Indian Army

POONCH, JAMMU & KASHMIR

Posted: 23 November 2025
Closed: 3 December 2025
GEM

Indian Army Cordless Drill Machines and Power Tools Tender Jammu & Kashmir 2025 ISI/ISO Standards

Indian Army

JAMMU, JAMMU & KASHMIR

Posted: 22 November 2025
Closed: 2 December 2025
GEM

Indian Army Tool Kit Tender for Hand Tools & Safety Equipment in India 2025 - EN 131 Ladder, Taparia Sets, ISI/EN Standards

Indian Army

WEST DELHI, DELHI

Posted: 17 November 2025
Closed: 27 November 2025
GEM

Bill of Quantities (BOQ) 56 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Weld Mesh Panel with Accessories Weld Mesh Panel with AccessoriesWeld Mesh Panels should produced by electrical resistance welded galvanized wires and subsequently powder coated as per below spec Mesh Wire Horizontal wire Dia 4.0 mm plus or minus 0.05mm Vertical wire Dia 4.0 mm plus or minus 0.05mm Mesh Size Mesh Size of 12.7 X 76.2 mm along Mesh Mesh Wire IS 280 2006 Panel size 2667X955mm Weight 23.90 to 24.05 Kg. Metallic Coating The wires should be galvanized and the min zinc weight for the harizontal and vertical wires is Zinc coated 40 to 50 GSM Powder Coating The panels are after welding subsequently polyester powder coated Layer have a thickness of 60 to 80 microns. Colour RAL 6005 Powder coating should withstand 1000 Hours of salt spray test Type Test Certificate to be provided Wire Tensile Strength Min 550 N Sq.mm. Weld strength The average weld shear strength of 4 welds taken at random shall not be less than 50 percentage of the breaking strength of the vertical wire Note High Security Weld Mesh is been installed at the bottom. Material MS. Mesh Wire Dia 4mm IS 280 2006. Coating IS 4826 1979.Weld Mesh as per EN 10223 7 EN 10245 1. 1200 Nos Per KM 1,200 nos vinic@14 60
2 Omega Clamp Omega clamps with profile cover plate to tighten the mesh panel along the post with 76mm dia 35mm width 3 mm thicknessMS strip as per IS 1730 Coating Hot Dip galvanized to minimum 350 GSM as per IS 2629 IS 4759 ASTM A 123 2800 Nos Per Km 2,800 nos vinic@14 60
3 Mushroom Head Bolt Nut with Washer Mushroom Head Bolt Nut with Washer Each clamps will be supplied with a pair of SS 304 mushroom headed square necked bolts and security nuts M8 X 50 IS 8535 1987 Washer specification Material SS 304 OD 15.89mm ID 8.38mm thickness 2.04mm 5600 Nos per Km 5,600 nos vinic@14 60
4 Fence Post Fence Post Type Circular Hollow Material MS Steel Tube IS 1161 Dimentions 76 mm Dia 3.2 mm plus or minus 10 percentage Thickness. Length 3345 mm plus or minus 5 percentage 2745 mm above ground level 600 mm under the ground level Coating Hot Dip galvanized to minimum 350 GSM as per IS 2629 IS 4759 ASTM A 123 followed by two coats of synthetic enamel paint Bush Green Colour over a coat of red oxide primer 400 Nos Per Km 400 nos vinic@14 60
5 Straining Y Arm for supporting top PTCC Straining YArm for supporting top PTCC Material MS Angle Size 50x50x5mm as per IS 1852. Coating Hot dip galvanized to Min 350 GSM as per IS 4759 2629 Length of 1 Arm is 750mm outer dia of 63 mm of sleeve cap will be fitted on the top of the fence post Straining Y Arm will manufactured as per drawing No 3534 ACF LC/002 SHEET 2 3 dt 10 Apr 18 Straining Y Arm will be installed at every 30 mtrs except intermediate arm post 34 Nos per Km 34 nos vinic@14 60
6 Accessories for fitting Y Arm Accessories for fitting Y Arm Mushroom Head Bolt with breakable head safety nuts Each Y Arm shall be supplied with two sets mush room headed bolts with security nuts and washers Material SS 304 Size M8 x 120 mm 67 nos vinic@14 60
7 Intermediate Y Arm for supporting top PTCC Material Intermediate Y Arm for supporting top PTCC Material MS Angle Size 50x50x3mm as per IS 1852 Coating Hot dip galvanized to Min 350 GSM as per IS 4759 IS 2629.Length of 1 Arm is 750 MM Angle between the two arms is 120 degree with a support steel strip of 25x5 mm galvanized as per IS 4759 and fixed with mushroom head bolt and nut M8x25mm Intermediate Y Arm will manufactured as per drawing No 3534/ACF LC 003 SHEET3 3 dt 10 Apr 18 attached Inner dia 80mm of cap bolted on top of the fence post 1 Intermediate Y Arm will be installed at every post except the posts with Straining Y arms 367 nos vinic@14 60
8 Accessories for fitting Y Arm Accessories for fitting Y Arm Mushroom Head Bolt with breakable head safety nuts Each Y Arm shall be supplied with two sets mush room headed bolts with security nuts and washers Material SS 304 Size M8 x 120 mm 734 nos vinic@14 60
9 Anchor Rod Anchor Rod 10 mm dia 300mm long GI Rod tie with fence post at bottom using tie wire 02 Nos for each post 800 nos vinic@14 60
10 Punched Tape Concertina Coil Punched Tape Concertina Coil including spike and handle with 56 turns and dia 610 mm having a core wire of high carbon spring steel of high tensile strength The punched tape and core wire 2.6 0.035 mm dia are electro galvanised to provide protection against out door exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil steel clips total 70 Nos per coil equally spaced to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19 mm and spacing of blades 24.00 plus or minus 0.5 mm C C. The weight of each coil will be 8 plus or minus 5 percentage Kgs without packing material and coil length 6 to 8 mtr when opened up with an effective height of 475 mm. Each coil wound with bituminised Hessian cloth for providing protective packing. 143 coils per Km 145 nos vinic@14 60
11 Galvanised Steel Barbed Wire ISI marked A 5 designation for Galvanised steel barbed wire Galvanised Steel Barbed Wire ISI marked A 5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278 1978. The barbed wire shall consist of two line wire 2.24 mm dia Tensile strength 390 590 N mm2 minimum breaking load of complete barbed wire 3KN one or both containing 2.00 mm dia barbs at 75 mm centre to centre and weighing 97 to 106 Kg per Km. 6,340 kg vinic@14 60
12 Quick setting compound RapiditeMake Acclerex Cico Fosroc Quick setting compound RapiditeMake Acclerex Cico Fosroc 598 ltr vinic@14 60
13 Aggregate 20mm. Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383-1970 Second revision and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out 76 cum vinic@14 60
14 Aggregate 40mm. Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded Conforming to IS 383 1970 Second revision and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out 52 cum vinic@14 60
15 MS binding wire Annealed not less than 0.9mm dia MS binding wire Annealed not less than 0.9mm dia 8 kg vinic@14 60
16 Natural sand Conforming to IS 383 1970 Natural sand Conforming to IS 383 1970 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete. 63 cum vinic@14 60
17 Portable Welding Machine Portable Welding Machine 1 set vinic@14 60
18 Wire Cutter 18 inch Wire Cutter 18 inch 2 nos vinic@14 60
19 Aluminium Ladder 9 steps Aluminium Ladder 9 steps 1 nos vinic@14 60
20 Hand Gloves Leather 500 G Hand Gloves Leather 500 G 40 pairs vinic@14 60
21 Hand Gloves Canvas Hand Gloves Canvas 40 pairs vinic@14 60
22 Hand Gloves Rubber Hand Gloves Rubber 25 pairs vinic@14 60
23 Bold Cutter 12 inch Bold Cutter 12 inch 2 nos vinic@14 60
24 Y Joint 10 feet Long Y Joint 10 feet Long 1 nos vinic@14 60
25 Y Joint 12 feet Long Y Joint 12 feet Long 1 nos vinic@14 60
26 Hammer Sledge 4lbs Hammer Sledge 4lbs 5 nos vinic@14 60
27 Steel Gurmaia Planer Steel Gurmaia Planer 10 nos vinic@14 60
28 Plumbob and Mason Thread Plumbob and Mason Thread 10 nos vinic@14 60
29 Cutting Pliers 8 inch Cutting Pliers 8 inch 5 nos vinic@14 60
30 Shovel with Wooden Handle Shovel with Wooden Handle 10 nos vinic@14 60
31 Hack Saw Frame Hack Saw Frame 10 nos vinic@14 60
32 Wooden Gurmala Wooden Gurmala 10 nos vinic@14 60
33 Ratchet Spanner Single Socket 14 sproket Ratchet Spanner Single Socket 14 sproket 5 nos vinic@14 60
34 Trowel Masson Brick Carandy Trowel Masson Brick Carandy 10 nos vinic@14 60
35 Water Level Pipe 100 m Water Level Pipe 100 m 10 nos vinic@14 60
36 Hack Saw Blade Double Ended Hack Saw Blade Double Ended 40 nos vinic@14 60
37 Measuring Tape 5 m Measuring Tape 5 m 3 nos vinic@14 60
38 Measuring Tape 30 m Measuring Tape 30 m 2 nos vinic@14 60
39 Axis Pick with Wooden Handle Axis Pick with Wooden Handle 8 nos vinic@14 60
40 Iron cutting machine Iron cutting machine 1 nos vinic@14 60
41 Drill Machine complete set Drill Machine complete set 1 nos vinic@14 60
42 Drill Bits complete set Drill Bits complete set 15 nos vinic@14 60
43 Ratchet Spanner with deep Socket 12 obliq 13 mm Ratchet Spanner with deep Socket 12 obliq 13 mm 2 nos vinic@14 60
44 Welding Rods Welding Rods 18 pkts vinic@14 60
45 Hog ring curd less rebar type Gun Machine battery operated typing wire dia meter 0.8 to 1mm battery capacity 4400 mah Hog ring curd less rebar type Gun Machine battery operated typing wire dia meter 0.8 to 1mm battery capacity 4400 mah 1 nos vinic@14 60
46 Rivet Gun Machine Rivet Gun Machine 3 nos vinic@14 60
47 Binding stick Binding stick 8 nos vinic@14 60
48 Tasla Iron 18 inch Tasla Iron 18 inch 8 nos vinic@14 60
49 HDPE water storage tank 500 ltr HDPE water storage tank 500 ltr 2 nos vinic@14 60
50 Fawada with wooden handle Fawada with wooden handle 8 nos vinic@14 60
51 Crow bar 5 feet long Crow bar 5 feet long 2 nos vinic@14 60
52 Bolt cutter 32 inch Bolt cutter 32 inch 2 nos vinic@14 60
53 Wire cutter 150 mm Wire cutter 150 mm 8 nos vinic@14 60
54 Suction cum delivery pipe plastic 1 inch dia 200m long Suction cum delivery pipe plastic 1 inch dia 200m long 1 roll vinic@14 60
55 Iron cutting machine blade Iron cutting machine blade 8 nos vinic@14 60
56 Alluminium straight edge 50mm sq 2 mm thick 1800mm long Alluminium straight edge 50mm sq 2 mm thick 1800mm long 3 nos vinic@14 60

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

PAN Card copy

2

GSTIN copy

3

Cancelled cheque copy

4

EFT Mandate copy certified by bank

5

End User Certificate (buyer format)

6

Proof of 2+ years government/PSU supply experience for similar products

7

Contract copies showing quantities supplied in each year

8

Non-disclosure declaration on bidder letterhead

9

Bidder undertakings on non-liquidity and financial standing

10

Technical compliance certificates and OEM authorizations (if applicable)

Frequently Asked Questions

Key insights about JAMMU AND KASHMIR tender market

How to bid for Indian Army weld mesh panel tender in Baramulla?

To bid, ensure you provide PAN, GST registration, cancelled cheque, EFT mandate, and End User Certificate. Demonstrate 2+ years govt supply experience, submit drawings within 5 days of award, and align with ISI marked/barbed wire standards. Include OEM authorizations if applicable.

What documents are required for the Indian Army procurement in Baramulla?

Submit PAN, GSTIN, cancelled cheque, EFT mandate, End User Certificate, and proof of 2+ years govt supply experience. Include contracts for similar work, non-disclosure on bidder letterhead, and technical bids with compliance certificates. Ensure GST issues are resolved upfront.

What is the EMD amount for the Baramulla tender and how paid?

EMD is ₹193,373. It is typically submitted as a bank guarantee or demand draft per the tender terms; ensure it accompanies the technical bid, with proper bidder details and validity through bid opening.

What are the key technical standards for this tender in Baramulla?

Critical standards include ISI marked barbed wire (A 5 designation) and ISI/IS 383 sand compliance; drawings must be approved by the buyer before fabrication; products must have at least 2 years residual market life.

What is the delivery location and installation scope for this tender?

Delivery/installation occurs at the AOR of 19 Inf Div, Pattan, Baramulla. Installation scope depends on the contract; any delays due to drawing approvals shift the delivery timeline without LD penalties.

What is the required experience for bidders under this Indian Army tender?

Bidders or OEMs must have supplied similar category products to central/state government bodies for a minimum of 2 years prior to bid opening; provide copies of relevant contracts showing yearly quantities.

How will GST be handled in this procurement in Baramulla?

GST reimbursement will be as per actuals or applicable rates, whichever is lower, capped to the quoted GST percentage; bidders must determine their GST implications and reflect them in the bid.

What are the conditions for drawing approvals in this tender?

Submit Detailed Design Drawings within 5 days of award; buyer will approve or provide a modification list within 5 days; supply must follow approved drawings; delays trigger timeline adjustments without LD.

Similar Tenders

5 found

Football,Football Gloves,Football Referees Card,Football Corner Flags,Football Net,Basketball 7 No

Indian Institute Of Information Technology (iiit)

📍 ALLAHABAD, UTTAR PRADESH

EMD: ₹35,300
Est: ₹11.8 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

Wooden screw,Wooden screw,Aluminum door stopper twin type,MS Bow Handle 6 inch Oxidized,anti termit

National Institute Of Technology (nit)

📍 KURUKSHETRA, HARYANA

EMD: ₹30,000
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

File flat rough double cut,File half round fine double cut,File round fine double cut,File flat fin

Directorate General Of Employment And Training (dge&t)

EMD: ₹48,731
Est: ₹16.2 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

Supplying of Head Showers,Supplying of PVC FlexibleConnection Pipes for Wash basins,Supplying of Pr

Tata Institute Of Fundamental Research Hyderabad

📍 Rangareddi, TELANGANA

EMD: ₹10,352
Est: ₹5.2 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

Punjab Technical Education & Industrial Training Department Workshop Equipment Tender Bathinda Punjab 2026 - ISI/ISO Compliant Tools & Accessories

N/a

📍 BATHINDA, PUNJAB

EMD: ₹360
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM