Open Tender for Cut section model for pneumatic components,Drill gauges Letter drill gauge,Power tools for fastenin in SURENDRA NAGAR, GUJARAT
Bid Publish Date
23-Sep-2026, 3:04 pm
Bid End Date
16-Oct-2026, 12:00 pm
EMD
₹21,000
Location
Progress
Directorate Of Employment & Training has released a public tender for Cut section model for pneumatic components, Drill gauges Letter drill gauge, Power tools for fastening Capacity 10-18, Hand Reamer set Nominal Dia. 6, 8, 10, 12, 16mm, Surface roughness comparison plates N1 - N12 Grade, ANVIL 50 KGS WITH STAND, INJECTOR, RING GROOVE CLEANER, VALVE SPRING COMPRESSOR UNIVERSAL, GLOW PLUG TESTER, DRILL POINT ANGLE GAUGE, STETHOSCOPE engineering, ARBOR PRESS HAND OPERATED 2 TON CAPACITY, DRILL TWIST 1. 5 MM TO 15 MM BY 0. 5 MM, Disk brake in working condition with caliper assembly with all parts, Drum brake assembly in Working Condition Brake drum, Working Model of power Showing parts like door, Cut section models of shock absorbers, Cut section of cross ply and radial tyres, COLL WINDING MACHINES WITH COUNTING METER, POTENTIAL TRANSFORMER, Single phase Transformer, core type, air cooled, Brake Test arrangement with two spring balance rating 0-25 KG, SHADED POLE MOTOR Fractional HP, Series Type portable box type Ohm Meter, Shunt Type portable box type Ohm Meter, AC STARTER STARTERS FOR 3-PHASE, 3 Phase - Smart Energy Meter, Milli Voltmeter centre zero analog, portable box type housed in Bakelite case, D. C. COMPOUND MOTOR 3 H. P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR, D. C. SHUNT MOTOR 3 H. P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR, SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER, Cut out Relays, Reverse current Relay, Under voltaged Relay, SOFT STARTER SINGLE PHASE, MAGNETIC FLUX METER 0- 500 TESLA, DMX CONTROLLER, RAWL PUNCH HOLDER AND BITS, HOT WIRE AMMETER 0-15 AMPS. , VOLTMETER M. C. MULTIRANGE, VOLTMETER CENTRE ZERO, AMMETER M. C. CENTRE ZERO, KILO WATT METER, WATT METER DYNAMO METER TYPE, FOOT PRINT GRIP 250 MM, WALL JUMPER OCTAGONAL, EARTH ELECTRODE PRIMARY ELECTRODE, EARTH ELECTRODE SECONDARY CU STRIP, DC POWER SUPPLY in SURENDRA NAGAR, GUJARAT. Quantity: 138. Submission Deadline: 16-10-2026 12: 00: 00. Download documents and apply online.
Tender Data
Bid Details
Quantity
138
Category
Cut section model for pneumatic components
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Past Performance
50 %
Warranty Period
15 days
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Cut section model for pneumatic components , Drill gauges Letter drill gauge , Power tools for fastening Capacity 10-18 , Hand Reamer set Nominal Dia. 6, 8, 10, 12, 16mm , Surface roughness comparison plates N1 - N12 Grade , ANVIL 50 KGS WITH STAND , INJECTOR , RING GROOVE CLEANER , VALVE SPRING COMPRESSOR UNIVERSAL , GLOW PLUG TESTER , DRILL POINT ANGLE GAUGE , STETHOSCOPE engineering , ARBOR PRESS HAND OPERATED 2 TON CAPACITY , DRILL TWIST 1.5 MM TO 15 MM BY 0.5 MM , Disk brake in working condition with caliper assembly with all parts , Drum brake assembly in Working Condition Brake drum , Working Model of power Showing parts like door , Cut section models of shock absorbers , Cut section of cross ply and radial tyres , COLL WINDING MACHINES WITH COUNTING METER , POTENTIAL TRANSFORMER , Single phase Transformer, core type, air cooled , Brake Test arrangement with two spring balance rating 0-25 KG , SHADED POLE MOTOR Fractional HP , Series Type portable box type Ohm Meter , Shunt Type portable box type Ohm Meter , AC STARTER STARTERS FOR 3-PHASE , 3 Phase - Smart Energy Meter , Milli Voltmeter centre zero analog, portable box type housed in Bakelite case , D.C. COMPOUND MOTOR 3 H.P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR , D.C. SHUNT MOTOR 3 H.P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR , SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER , Cut out Relays , Reverse current Relay , Under voltaged Relay , SOFT STARTER SINGLE PHASE , MAGNETIC FLUX METER 0- 500 TESLA , DMX CONTROLLER , RAWL PUNCH HOLDER AND BITS , HOT WIRE AMMETER 0-15 AMPS. , VOLTMETER M.C. MULTIRANGE , VOLTMETER CENTRE ZERO , AMMETER M.C. CENTRE ZERO , KILO WATT METER , WATT METER DYNAMO METER TYPE , FOOT PRINT GRIP 250 MM , WALL JUMPER OCTAGONAL , EARTH ELECTRODE PRIMARY ELECTRODE , EARTH ELECTRODE SECONDARY CU STRIP , DC POWER SUPPLY
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
38
Pre-Bid & Qualification
Pre-Bid Date
30-09-2026 11:00:00
Pre-Bid Venue
ITI PATDI NEAR VANDEMATARAM SOCIETY, OPP.MODEL SCHOOL, BAJANA ROAD PATDI, 382765
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
NDUSTRIAL TRAINING INSTITUTE
Delivery Pincodes
382765
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Patel Jignaben Ishwarbhai | 382765,NDUSTRIAL TRAINING INSTITUTE, PATDI , OPP. MODEL SCHOOL, NEAR VANDEMATRAM SOCIETY, PATDI-BAJANA ROAD, SH-19, AT-PATDI. TA- PATDI. DIST- SURENDRANAGAR. STATE- GUJARAT. | NDUSTRIAL TRAINING INSTITUTE | - | 382765 | 1 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9900592.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
52 Items Sign in to view GEM price trends Sign in for GEM prices
Cut section model for pneumatic components
Cut section model for pneumatic components with Profile plate, Anodised Aluminium
Drill gauges Letter drill gauge
Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to 12.5mm, 30 holes)
Power tools for fastening Capacity 10-18
Power tools for fastening Capacity 10-18mm
Hand Reamer set Nominal Dia. 6, 8, 10, 12, 16mm
Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm
Surface roughness comparison plates N1 - N12 Grade
Surface roughness comparison plates N1 - N12 Grade
ANVIL 50 KGS WITH STAND
ANVIL 50 KGS WITH STAND
INJECTOR
INJECTOR (TWO TYPES) MULTI HOLE TYPE, PINTLE TYPE
RING GROOVE CLEANER
RING GROOVE CLEANER
VALVE SPRING COMPRESSOR UNIVERSAL
VALVE SPRING COMPRESSOR UNIVERSAL
GLOW PLUG TESTER
GLOW PLUG TESTER
DRILL POINT ANGLE GAUGE
DRILL POINT ANGLE GAUGE
STETHOSCOPE engineering
STETHOSCOPE engineering
ARBOR PRESS HAND OPERATED 2 TON CAPACITY
ARBOR PRESS HAND OPERATED 2 TON CAPACITY
DRILL TWIST 1.5 MM TO 15 MM BY 0.5 MM
DRILL TWIST 1.5 MM TO 15 MM (VARIOUS SIZES) BY 0.5 MM
Disk brake in working condition with caliper assembly with all parts
Disk brake in working condition with caliper assembly with all parts Exhibiting Brake disc, Caliper assembly, tandem master cylinder, brake hoses, oil bottle, pedal, etc
Drum brake assembly in Working Condition Brake drum
Drum brake assembly in Working Condition Brake drum, tandem master cylinder, oil container, brake hose, brake pedal
Working Model of power Showing parts like door
Working Model of power Showing parts like door, glass with motor and its gear arrangement and operating switch. windows
Cut section models of shock absorbers
Cut section models of shock absorbers
Cut section of cross ply and radial tyres
Cut section of cross ply and radial tyres
COLL WINDING MACHINES WITH COUNTING METER
COLL WINDING MACHINES WITH COUNTING METER
POTENTIAL TRANSFORMER
POTENTIAL TRANSFORMER 415 V, 50 Hz, PT ratio, 440V/110 V,10 VA
Single phase Transformer, core type, air cooled
Single phase Transformer, core type, air cooled1 KVA , 240/415 V, 50 HZ
Brake Test arrangement with two spring balance rating 0-25 KG
Brake Test arrangement with two spring balance rating 0-25 KG
SHADED POLE MOTOR Fractional HP
SHADED POLE MOTOR Fractional HP , 240 V , 50 Hz
Series Type portable box type Ohm Meter
Series Type portable box type Ohm Meter 50/2000 ohm analog
Shunt Type portable box type Ohm Meter
Shunt Type portable box type Ohm Meter 50/2000 ohm analog
AC STARTER STARTERS FOR 3-PHASE
AC STARTER STARTERS FOR 3-PHASE, 400 V,50 CYCLES, 2 TO 5 H.P.A.C. MOTORS AUTO TRANSFORMER TYPE STARTER
3 Phase - Smart Energy Meter
3 Phase - Smart Energy Meter
Milli Voltmeter centre zero analog, portable box type housed in Bakelite case
Milli Voltmeter centre zero analog, portable box type housed in Bakelite case 100-0-100 mV
D.C. COMPOUND MOTOR 3 H.P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR
D.C. COMPOUND MOTOR 3 H.P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR(LABORATORY TYPE)
D.C. SHUNT MOTOR 3 H.P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR
D.C. SHUNT MOTOR 3 H.P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR (LABORATORY TYPE)
SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER
SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER (BIDIRECTIONAL)5-30AMOPS,240V
Cut out Relays
Cut out Relaysa. 16A, 440V
Reverse current Relay
Reverse current Relay 16A, 440V
Under voltaged Relay
Under voltaged Relay 360V-440V
SOFT STARTER SINGLE PHASE
SOFT STARTER SINGLE PHASE
MAGNETIC FLUX METER 0-500 TESLA
MAGNETIC FLUX METER 0-500 TESLA
DMX CONTROLLER
DMX CONTROLLER
RAWL PUNCH HOLDER AND BITS
RAWL PUNCH HOLDER AND BITS (NO. 8,10)
HOT WIRE AMMETER 0-15 AMPS.
HOT WIRE AMMETER 0-15 AMPS.
VOLTMETER M.C. MULTIRANGE
VOLTMETER M.C. MULTIRANGE 0-70,150,300 & 600V
VOLTMETER M.C. MULTIRANGE
VOLTMETER M.C. MULTIRANGE 0-15,30,50 & 75 V
VOLTMETER CENTRE ZERO
VOLTMETER CENTRE ZERO 15-0-15 VOLTS
AMMETER M.C. CENTRE ZERO
AMMETER M.C. CENTRE ZERO 5-0-5 AMP.
KILO WATT METER
KILO WATT (KW) METER 15 A 440 V 3 PHASE
WATT METER DYNAMO METER TYPE
WATT METER DYNAMO METER TYPE 5 AMP.AND 250 V 1.25 KW
RAWL PUNCH HOLDER AND BITS
RAWL PUNCH HOLDER AND BITS (NO. 8,10,14,16)
FOOT PRINT GRIP 250 MM
FOOT PRINT GRIP 250 MM
WALL JUMPER OCTAGONAL
WALL JUMPER OCTAGONAL 37MMX450MM AND 37X600 MM
EARTH ELECTRODE PRIMARY ELECTRODE
EARTH ELECTRODE PRIMARY ELECTRODE 2100X28X3.25MM
EARTH ELECTRODE SECONDARY CU STRIP
EARTH ELECTRODE SECONDARY CU STRIP 20X5MM
DC POWER SUPPLY
DC POWER SUPPLY 250 V / 25A
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Cut section model for pneumatic components | Cut section model for pneumatic components with Profile plate, Anodised Aluminium | 1 | nos | patdi_con | 15 | |
| 2 | Drill gauges Letter drill gauge | Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to 12.5mm, 30 holes) | 2 | nos | patdi_con | 15 | |
| 3 | Power tools for fastening Capacity 10-18 | Power tools for fastening Capacity 10-18mm | 1 | nos | patdi_con | 15 | |
| 4 | Hand Reamer set Nominal Dia. 6, 8, 10, 12, 16mm | Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm | 1 | nos | patdi_con | 15 | |
| 5 | Surface roughness comparison plates N1 - N12 Grade | Surface roughness comparison plates N1 - N12 Grade | 1 | nos | patdi_con | 15 | |
| 6 | ANVIL 50 KGS WITH STAND | ANVIL 50 KGS WITH STAND | 1 | nos | patdi_con | 15 | |
| 7 | INJECTOR | INJECTOR (TWO TYPES) MULTI HOLE TYPE, PINTLE TYPE | 3 | nos | patdi_con | 15 | |
| 8 | RING GROOVE CLEANER | RING GROOVE CLEANER | 1 | nos | patdi_con | 15 | |
| 9 | VALVE SPRING COMPRESSOR UNIVERSAL | VALVE SPRING COMPRESSOR UNIVERSAL | 1 | nos | patdi_con | 15 | |
| 10 | GLOW PLUG TESTER | GLOW PLUG TESTER | 1 | nos | patdi_con | 15 | |
| 11 | DRILL POINT ANGLE GAUGE | DRILL POINT ANGLE GAUGE | 1 | nos | patdi_con | 15 | |
| 12 | STETHOSCOPE engineering | STETHOSCOPE engineering | 1 | nos | patdi_con | 15 | |
| 13 | ARBOR PRESS HAND OPERATED 2 TON CAPACITY | ARBOR PRESS HAND OPERATED 2 TON CAPACITY | 1 | nos | patdi_con | 15 | |
| 14 | DRILL TWIST 1.5 MM TO 15 MM BY 0.5 MM | DRILL TWIST 1.5 MM TO 15 MM (VARIOUS SIZES) BY 0.5 MM | 3 | nos | patdi_con | 15 | |
| 15 | Disk brake in working condition with caliper assembly with all parts | Disk brake in working condition with caliper assembly with all parts Exhibiting Brake disc, Caliper assembly, tandem master cylinder, brake hoses, oil bottle, pedal, etc | 1 | nos | patdi_con | 15 | |
| 16 | Drum brake assembly in Working Condition Brake drum | Drum brake assembly in Working Condition Brake drum, tandem master cylinder, oil container, brake hose, brake pedal | 1 | nos | patdi_con | 15 | |
| 17 | Working Model of power Showing parts like door | Working Model of power Showing parts like door, glass with motor and its gear arrangement and operating switch. windows | 1 | nos | patdi_con | 15 | |
| 18 | Cut section models of shock absorbers | Cut section models of shock absorbers | 1 | nos | patdi_con | 15 | |
| 19 | Cut section of cross ply and radial tyres | Cut section of cross ply and radial tyres | 1 | nos | patdi_con | 15 | |
| 20 | COLL WINDING MACHINES WITH COUNTING METER | COLL WINDING MACHINES WITH COUNTING METER | 1 | nos | patdi_con | 15 | |
| 21 | POTENTIAL TRANSFORMER | POTENTIAL TRANSFORMER 415 V, 50 Hz, PT ratio, 440V/110 V,10 VA | 2 | nos | patdi_con | 15 | |
| 22 | Single phase Transformer, core type, air cooled | Single phase Transformer, core type, air cooled1 KVA , 240/415 V, 50 HZ | 3 | nos | patdi_con | 15 | |
| 23 | Brake Test arrangement with two spring balance rating 0-25 KG | Brake Test arrangement with two spring balance rating 0-25 KG | 1 | nos | patdi_con | 15 | |
| 24 | SHADED POLE MOTOR Fractional HP | SHADED POLE MOTOR Fractional HP , 240 V , 50 Hz | 1 | nos | patdi_con | 15 | |
| 25 | Series Type portable box type Ohm Meter | Series Type portable box type Ohm Meter 50/2000 ohm analog | 2 | nos | patdi_con | 15 | |
| 26 | Shunt Type portable box type Ohm Meter | Shunt Type portable box type Ohm Meter 50/2000 ohm analog | 2 | nos | patdi_con | 15 | |
| 27 | AC STARTER STARTERS FOR 3-PHASE | AC STARTER STARTERS FOR 3-PHASE, 400 V,50 CYCLES, 2 TO 5 H.P.A.C. MOTORS AUTO TRANSFORMER TYPE STARTER | 1 | nos | patdi_con | 15 | |
| 28 | 3 Phase - Smart Energy Meter | 3 Phase - Smart Energy Meter | 1 | nos | patdi_con | 15 | |
| 29 | Milli Voltmeter centre zero analog, portable box type housed in Bakelite case | Milli Voltmeter centre zero analog, portable box type housed in Bakelite case 100-0-100 mV | 2 | nos | patdi_con | 15 | |
| 30 | D.C. COMPOUND MOTOR 3 H.P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR | D.C. COMPOUND MOTOR 3 H.P. 250 V, WITH 4 POINT STARTER AND FIELD REGULATOR(LABORATORY TYPE) | 1 | nos | patdi_con | 15 | |
| 31 | D.C. SHUNT MOTOR 3 H.P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR | D.C. SHUNT MOTOR 3 H.P. 250 V WITH 3 POINT STARTER AND SPEED REGULATOR (LABORATORY TYPE) | 1 | nos | patdi_con | 15 | |
| 32 | SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER | SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER (BIDIRECTIONAL)5-30AMOPS,240V | 1 | nos | patdi_con | 15 | |
| 33 | Cut out Relays | Cut out Relaysa. 16A, 440V | 2 | nos | patdi_con | 15 | |
| 34 | Reverse current Relay | Reverse current Relay 16A, 440V | 2 | nos | patdi_con | 15 | |
| 35 | Under voltaged Relay | Under voltaged Relay 360V-440V | 2 | nos | patdi_con | 15 | |
| 36 | SOFT STARTER SINGLE PHASE | SOFT STARTER SINGLE PHASE | 1 | nos | patdi_con | 15 | |
| 37 | MAGNETIC FLUX METER 0-500 TESLA | MAGNETIC FLUX METER 0-500 TESLA | 3 | nos | patdi_con | 15 | |
| 38 | DMX CONTROLLER | DMX CONTROLLER | 1 | nos | patdi_con | 15 | |
| 39 | RAWL PUNCH HOLDER AND BITS | RAWL PUNCH HOLDER AND BITS (NO. 8,10) | 63 | nos | patdi_con | 15 | |
| 40 | HOT WIRE AMMETER 0-15 AMPS. | HOT WIRE AMMETER 0-15 AMPS. | 1 | nos | patdi_con | 15 | |
| 41 | VOLTMETER M.C. MULTIRANGE | VOLTMETER M.C. MULTIRANGE 0-70,150,300 & 600V | 1 | nos | patdi_con | 15 | |
| 42 | VOLTMETER M.C. MULTIRANGE | VOLTMETER M.C. MULTIRANGE 0-15,30,50 & 75 V | 1 | nos | patdi_con | 15 | |
| 43 | VOLTMETER CENTRE ZERO | VOLTMETER CENTRE ZERO 15-0-15 VOLTS | 1 | nos | patdi_con | 15 | |
| 44 | AMMETER M.C. CENTRE ZERO | AMMETER M.C. CENTRE ZERO 5-0-5 AMP. | 2 | nos | patdi_con | 15 | |
| 45 | KILO WATT METER | KILO WATT (KW) METER 15 A 440 V 3 PHASE | 1 | nos | patdi_con | 15 | |
| 46 | WATT METER DYNAMO METER TYPE | WATT METER DYNAMO METER TYPE 5 AMP.AND 250 V 1.25 KW | 1 | nos | patdi_con | 15 | |
| 47 | RAWL PUNCH HOLDER AND BITS | RAWL PUNCH HOLDER AND BITS (NO. 8,10,14,16) | 2 | nos | patdi_con | 15 | |
| 48 | FOOT PRINT GRIP 250 MM | FOOT PRINT GRIP 250 MM | 2 | nos | patdi_con | 15 | |
| 49 | WALL JUMPER OCTAGONAL | WALL JUMPER OCTAGONAL 37MMX450MM AND 37X600 MM | 4 | nos | patdi_con | 15 | |
| 50 | EARTH ELECTRODE PRIMARY ELECTRODE | EARTH ELECTRODE PRIMARY ELECTRODE 2100X28X3.25MM | 2 | nos | patdi_con | 15 | |
| 51 | EARTH ELECTRODE SECONDARY CU STRIP | EARTH ELECTRODE SECONDARY CU STRIP 20X5MM | 2 | nos | patdi_con | 15 | |
| 52 | DC POWER SUPPLY | DC POWER SUPPLY 250 V / 25A | 1 | nos | patdi_con | 15 |
Categories
76
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender