TenderDekho Logo
GEM

Indian Army Security Equipment Tender 2026 in Delhi NCR for BIS ISI Marked Electrical Switchgear & Lighting Components

Bid Publish Date

04-Jun-2026, 6:04 pm

Bid End Date

18-Jun-2026, 5:00 pm

Progress

Issue04-Jun-2026, 6:04 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

5884

Category

LED Batten Light (LED Tube Light) (V2)

Bid Type

Two Packet Bid

Key Highlights

  • Brand/OEM requirements including OEM authorisation certificates with bid number
  • ISO 9001 certification mandatory for bidder or OEM
  • IS I marked electrical components and BIS Marked products required
  • On-demand test reports and CE/IEC conformity emphasized
  • Advance sample provision obligation prior to supply
  • Bank solvency and EMD submission mandatory with bid
  • 3-year turnover criterion for bidder and OEM
  • Penalties/LDs and performance bond implied through ATC

Categories 185

COPPER WIRE ELECTRICAL AWM CABLE APPARELS EARTHING BRAID MEDICAL X RAY FILM ILLUMINATORS AND VIEWING EQUIPMENT PLATFORM SCALE UG CABLE ALTERATION OF BUILDING ANGLE APFC PANEL VIDEO RECORDER ALTERATION BARITONE HORNS BUILDING CONSTRUCTION PAINTING PLUMBING WORK COPPER COIL DISTRIBUTION BOARD BULB COPPER CABLE COPPER STRIP EARTH WIRE ALUM POWER CABLE CABBING EQUIPMENTS COMPRESSOR PTFE WIRE AIR CYLINDERS PIPE PROJECT TUBE AND FITTING AIR COOLED ENGINE ELECTRICAL PRODUCTS SWITCH YARD WIRING ASSEMBLY PROCESS INDICATOR LED STREET LIGHT SOLAR WATER SYSTEM VIDEO OUTPUT DEVICE AMPS SPRAYER STEEL FURNITURE HARDWARE AND FASTENERS LED LIGHT PANEL GEYSER JOINTING OF PIPE BLADE SILVER TIP WELDING BRAZING AND SOLDERING SERVICES DISCRETE COMPONENTS ELECTRICAL WIRE PRE FABRICATED STEEL XLPE CABLE CABLE DUCT RUBBER GASKET PIPING LIGHTENING PROTECTION DEVICE INSULATED WIRE TELECOM EQUIPMENT ROTARY SWITCHES AMPOULE FILLING EQUIPMENT WATER HEATER COPPER ALLOY AIRCRAFT CABLE RF CABLE CLOTHING MCCB FAN SPARE PARTS INSTRUMENTATION CABLE ELECTRICAL SUBSTATION HEATER CLADDING ELECTRICAL?CONDUIT COPPER SHEET MILITARY VEHICLE BED RECREATIONAL EQUIPMENT PANEL STOMACHERS CONDUCTOR LIGHT AND BULBS CABLING ELASTROMERIC PIPE SOCKET POWER WIRE SUPPLY OT CEILING LIGHT ALUMINIUM ALLOY SEALING RING ELECTRICAL REGULATOR WATER TANK AVIATION SOLAR HEATING BRACKET AC PIPES BLOCKS AIR EXHAUSTER GI PIPE FLEXIBLE CABLE HIGH TENSION PANEL LED LUMINARIES COPPER PIPE GLASSWARE COILED CABLE LOCAL AREA NETWORK CABLING SWITCH GEAR TUBE LIGHT FITMENT LFH CABLE CABLE TERMINAL ELECTRODES PVC CABLE SHIELDED CABLE BRAZE RINGS BEARING HOLDERS SWITCH BOX ELECTRONIC PRODUCTS AND APPLIANCES AWM WIRE LED LIGHT PNEUMATIC BOLTS WASHERS ALLOY GASKETS AND SEALS POWER WIRE HIGH MAST STEEL PLATE NUTS TUBE LEAD WIRE DISTILLED WATER INSULATION MATERIAL SCBA BACK PLATE BOX VALVE TANK CLEANER WATER SUPPLY MATERIAL WIRE FILTER RETAINERS NON FERROUS PIPE IRON PIPE BRONZE PIPE ELECTRONIC COMPONENTS AND SUPPLIES CLAMPS FLUORESCENT LAMP MODULAR SWITCH VOICE RECORDER WELDING MASKS HEATING EQUIPMENT SPARES BARE CABLE GAS BURNERS INDUSTRIAL CLEANING SERVICES LIGHTING TRANSITION METALS CABLE CABLE BOX FIRE BREATHING APPARATUS SOLAR WATER HEATER VIBRATORY SCREEN MACHINE SOLAR GEYSER HOSE PIPE VALVE PARTS AND ACCESSORIES ESCRAP WATER COOLED ENGINE AUTOMOTIVE CABLE FLEXIBLE PIPE BASE METALS BUSBAR CPVC PIPE INSULATED CABLE PEB TEA KETTLE UPVC PIPE CABLE SUPPLY ALUMINUM FAN METAL PRODUCTS SOLAR HEATER CONTAINER PHENOL FORMALDEHYDE RESIN LABOUR NON CONVENTIONAL LIGHT GALVANIZED IRON PIPE

Tender Overview

The Indian Army (Department Of Military Affairs) invites bids for a range of electrical switches, lighting luminaire systems, MCB enclosures, and ISI/BIS marked components across multiple categories. The procurement covers products with BIS/ISI marks, IEC/CE conformity, and performance specs such as rated current, wattage, and pole configurations. The vendor must provide OEM authorisations and deliver to a military installation site in India, with the potential for advance samples and strict adherence to EMD and turnover prerequisites. The tender emphasizes quality certifications (ISO 9001), and requires on-demand test reports. This is a high-compliance, standards-driven opportunity demanding rigorous documentation and supplier solvency verification.

Technical Specifications & Requirements

  • Product scope includes: BIS marked electrical components, IS I marked garden lighting systems, and MCB steel sheet enclosures with steel enclosure provisions.
  • Key technical attributes include: Rated Current, Rated Wattage, Type of Terminal Connection, Number of Poles, and protection ratings (IP).
  • Standards and tests: Product BIS Marked, ISI marked, and IEC compliant with CE certification.
  • Additional details cover: payload of lighting systems, LED lamp ratings, lumen efficacy, diffuser materials, IK durability, IP protection per IS 10322, and ISI-marked wiring lengths.
  • Delivery terms require advance sample provision and on-demand test reports; OEM authorisation certificates are mandatory.
  • The BOQ contains 83 items with undefined quantities; emphasis on compliance over volume.

Terms, Conditions & Eligibility

  • EMD and bank solvency documentation are mandatory; bidders must upload EMD/BG and solvency certificates.
  • Turnover requirements apply to bidder and OEM; ISO 9001 certification is mandatory for the bidder or OEM.
  • Bidder must provide PAN, GSTIN, cancelled cheque, EFT mandate, and OEM authorisation with the bid.
  • A bidder affidavit regarding non-blacklisting and performance history with government contracts is required.
  • Advance sample sharing is expected; penalties and penalties clauses are to be adhered to as per ATC.

Key Specifications

  • BIS marked electrical components and ISI marked products required

  • Rated Current, Rated Wattage, Number of Poles, Type of Terminal Connection

  • Protection: IP rating per IS 10322, IK for diffuser materials

  • Electrical lighting: LED rating in Watts, lumen efficacy, and system wattage

  • Warranty: replacement warranty for lighting systems including light source

  • Advance sample provision before supply; on-demand test reports

Terms & Conditions

  • Mandatory EMD/BG submission and bank solvency certificate

  • ISO 9001 certification for bidder or OEM

  • OEM authorisation with bid number and on-demand test reports

Important Clauses

Payment Terms

Payment terms linked to supply milestone as per ATC; advance sample and delivery tied to milestones; EMD forfeiture on non-compliance

Delivery Schedule

Delivery timelines aligned with purchase order; samples prior to commencement; staged delivery as per contract terms

Penalties/Liquidated Damages

LDs applicable for late delivery or non-conformance; details provided in ATC and contract schedule

Bidder Eligibility

  • Minimum turnover: three-year average as defined in bid document

  • ISO 9001 certification mandatory (bidder or OEM)

  • OEM authorisation with bid number and valid identity

  • Not blacklisted by any government agency, affidavit required

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

No

Bid To RA Enabled

Yes

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 20

GeM-Bidding-9405307.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Elecric Bells and Accesso

Indian Army

Posted: 18 February 2026
Closed: 4 March 2026
GEM

North Western Railway Non Modular Piano Type Domestic Electrical Switches ISI Marked IS 3854 Tender Jodhpur Rajasthan 2026

North Western Railway

JAIPUR, RAJASTHAN

Posted: 28 April 2026
Closed: 13 May 2026
GEM

Southern Railway Modular Piano Type Domestic Electrical Switches ISI Marked IS 3854 Tender 2026 Tamil Nadu

Southern Railway

ERODE, TAMIL NADU

Posted: 10 April 2026
Closed: 20 April 2026
GEM

South Central Railway Modular Piano Type Domestic Electrical Switches ISI Marked to IS 3854 Tender 2026

South Central Railway

HYDERABAD, TELANGANA

Posted: 11 May 2026
Closed: 25 May 2026
GEM

Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,modular electrical enclosure

Indian Army

KOHIMA, NAGALAND

Posted: 25 February 2026
Closed: 12 March 2026
GEM

Bill of Quantities (BOQ) 83 Items Sign in for GEM prices

#1

Supply and Fixing socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1, 230 Volts all as specified.

Supply and Fixing socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1, 230 Volts all as specified.

20 each Delivery: 180 days
#2

Supply and Fixing switch socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.

Supply and Fixing switch socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.

60 each Delivery: 180 days
#3

Supply and Fixing of switch socket combination 2 in 1 multipurpose 3 by 5 pin 5 by 15 amps flush type complete all as specified

Supply and Fixing of switch socket combination 2 in 1 multipurpose 3 by 5 pin 5 by 15 amps flush type complete all as specified

40 each Delivery: 180 days
#4

Supply and Fixing lamp holder insulated body surface bakelite with back plate suitable for angle by batten fittings fixed with PVC round by square blocks complete all as specified and directed.

Supply and Fixing lamp holder insulated body surface bakelite with back plate suitable for angle by batten fittings fixed with PVC round by square blocks complete all as specified and directed.

20 each Delivery: 180 days
#5

Supply and Fixing in repair switch socket combination flush type multipurpose 2 by 3 pin 5 by 15 amps 2 in 1, 230 volts

including removal old existing unserviceable one complete all as specified and directed.

100 each Delivery: 180 days
#6

Supply and Fixing in repair switch socket combination 2 in 1 multipurpose 3 by 5 pin 5 by 15 amps flush type

including removal old existing unserviceable one complete all as specified and directed.

50 each Delivery: 180 days
#7

Supply and Fixing in repair lamp holder insulated body surface bakelite with back plate suitable for angle by batten fittings fixed with wooden round blocks

including removal old existing unserviceable one complete all as specified and directed.

30 each Delivery: 180 days
#8

Supply and Fixing new energy saving rechargable LED bulb 9 Watt, Base-22, 240 V, CCT-6500K polycatbonate body. Lamp life 15000 Working Hours complete all as specified and directed

Supply and Fixing new energy saving rechargable LED bulb 9 Watt, Base-22, 240 V, CCT-6500K polycatbonate body. Lamp life 15000 Working Hours complete all as specified and directed

50 each Delivery: 180 days
#9

Supply and Fixing sheet metal enclosure for VT DB TPN, MCB DB TFN 4 way with provision for MCCB as INCOMER and MCB as out going,

Confirming to IS as per IEC 61439-3, IP 43, double door including 63 Amp, 25 KA, TP MCCB as incomer Vertical type double door, 63 Amps MCCB rate inclusive including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing complete all as specified and directed by Engr-in-Charge

2 each Delivery: 180 days
#10

Supply and Fixing of sheet metal enclosure for MCB, DB, TPN 415 Velts, IP-43, 100 amps rated copper busbar 4 way Double door

Vertical DB with prov of MCB as incomer Confirming to IS as por IEC 61439-3 including fixing the DB box flush in wall of any type and making good the distrubed surface to malch as the existing complete all as specified and directed by Engr-in-Charge

20 each Delivery: 180 days
#11

Supply and Fixing of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 8 way Double door

enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 IK 09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-Charge

12 each Delivery: 180 days
#12

Supply and Fixing of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 4 way Double door

enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 IK 09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-Charge

6 each Delivery: 180 days
#13

Supply and fixing in repair sheet metal enclosures triple pole and earth plug with socket, as per IEC 61439 3 complete with one four pole MCB of capacity 63 A 3P plus N plus E FP, 415 V

with neutral links including taking down unserviceable one all as specified and directed by Engineer in charge.

2 each Delivery: 180 days
#14

Supply and Fixing for Sub main wiring with Four run of single core 3 phase PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm

multistranded copper conductor, FRLSH cable drawn in with and including PVC casing capping not less than 32 mm ISI marked including all accessories of casing caping including one run of PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conducter cable connected to earth dolly complete all as specified and directed by EIC. 4 x 6.0 sqmm + 1 x 6.0 Sqmm earth wire

120 rm Delivery: 180 days
#15

All as per Item No 47 of BoQ Spec file here in before but of size 6 Sqmm 3 core for single phase phase, Neutral and Earth. 2 x 6.0 sqmm plus 1 x 6.0 Sqmm earth wire

Complete all as specified and as directed.

180 rm Delivery: 180 days
#16

All as per Item No 47 of BoQ Spec file here in before but of size 4 Sqmm 3 core for single phase phase, Neutral and Earth. 2 x 4.0 samm plus 1 x 4.0 Sqmm earth wire

Complete all as specified and as directed.

150 rm Delivery: 180 days
#17

All as per Item No 47 of BoQ Spec file here in before but of size 10 Sqmm 5 core for three phase, Neutral and Earth. 4 x 10.0 sqmm plsu 1x 10.0 Sqmm earth wire

Complete all as specified and as directed.

30 rm Delivery: 180 days
#18

Supply and fixing in repair Ultra bright LED tube rod18 Watt G-13 Lamp Holder 240 V, PF 0.90, colour Temp 6500K

System Luminious efficacy less than 110lumen per watt, to be fixed in existing or new batten by patt including changing the wiring suitable for T8 LED retrofit lamp in existing tube light fitting complete

80 each Delivery: 180 days
#19

Supply and Fixing Energy saving new generation environmental friendly long life IP66 security light fitting high power LEDs as light source and electronic driver of capacity 25 watts

with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23 by 0.193 from ceiling rose to fitting and Gt pipe bracket made out of Gl pipe medium grade 32 mm dia 1.5. mtr long bend to required shape complete incl removal of old unsv fitting all as directed.

15 each Delivery: 180 days
#20

Supply and fix Round highway LED light 100 watt operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 100 lumens per watt

isolated electronic LED driver incl taking down light fittings from any hight up to 18 mtrs complete all as specified and as directed.

8 each Delivery: 180 days
#21

Supply and fix of LED Aviation Obstruction light Red Colour incl taking out old uis fitting

completeall as specified and directed as per Engr-in-charge.

4 each Delivery: 180 days
#22

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and directed

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and directed

30 each Delivery: 180 days
#23

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down. existing unserviceable complete all as specified and directed

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down. existing unserviceable complete all as specified and directed

30 each Delivery: 180 days
#24

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and directed.

Supply and Fixing in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and directed.

30 each Delivery: 180 days
#25

Supply and Fixing in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and directed

Supply and Fixing in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and directed

20 each Delivery: 180 days
#26

Supply and Fixing in repair modular switch 1 way 6A, 1 Module complete all as specified and directed

Supply and Fixing in repair modular switch 1 way 6A, 1 Module complete all as specified and directed

100 each Delivery: 180 days
#27

Supply and Fixing in repair modular switch 1 way 16A, 1 Module complete all as specified and directed

Supply and Fixing in repair modular switch 1 way 16A, 1 Module complete all as specified and directed

40 each Delivery: 180 days
#28

Supply and Fixing in repair modular bell switch 1 way, 1 Module complete all as specified and directed

Supply and Fixing in repair modular bell switch 1 way, 1 Module complete all as specified and directed

10 each Delivery: 180 days
#29

Supply and Fixing in repair modular socket 6A 2 by 3 Pin combined -2 module

including repairing by replacement of whole modular fittings and frame with new one as per existing fittings complete all as specified and directed by EIC

50 each Delivery: 180 days
#30

Supply and Fixing in repair modular switch socket combination 16A, 6 Pin combined -3 module

including repairing by replacement of whole modular fittings and frame with now one as per existing fittings complete all as specified and directed by EIC

50 each Delivery: 180 days
#31

Supply and fixing in repair of stepped type Modular electronic fan regulator 1-module, 100 watt flush type,

on the existing hylam laminated sheet etc as required.complete all as specified and directed by EIC. including taking down old us

20 each Delivery: 180 days
#32

Supply and Fixing in repair Modular metal flush box of 1 by 2 module with white cover plate including make good to match with existing surface complete all as specified and directed by EIC

Supply and Fixing in repair Modular metal flush box of 1 by 2 module with white cover plate including make good to match with existing surface complete all as specified and directed by EIC

20 each Delivery: 180 days
#33

Supply and Fixing in repair Modular metal flush box of 3 module with white cover plate including make good to match with existing surface complete all as specified and directed by EIC

Supply and Fixing in repair Modular metal flush box of 3 module with white cover plate including make good to match with existing surface complete all as specified and directed by EIC

20 each Delivery: 180 days
#34

Supply and Fixing in repair Modular metal flush box of 4 module with white cover plate including

taking out uls including make good to match with existing surface complete all as specified and directed by EIC

20 each Delivery: 180 days
#35

Supply and Fixing in repair Modular metal flush box of 6 module with white cover plate

including taking out uls including make good to match with existing surface complete all as specified and directed by EIC

20 each Delivery: 180 days
#36

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick

burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth ead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal

8 each Delivery: 180 days
#37

Supply and Fixing of LED wall light Bed side light fitting for study table including 3 watt LED, aluminium body,

including LED driver with on by off button switch flexible pipe with lamp head 360 degree rotating type, 220 Volts mounted on wall as per sample including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core, in casing capping and including taking connection from nearest socket by light point and light to be fixed by ounted on PVC rectangular box white colour complete all as specified & directed

50 each Delivery: 180 days
#38

Supply only inner container SS or as per sample suitable for vertical type geyser 50 Itrs storage capacity

including taking down of defective container as per OEMs specifications complete all as specified and directed

10 each Delivery: 180 days
#39

Supply only inner container SS or as per sample suitable for vertical type geyser 25 Itrs storage capacity

including taking down of defective container as per OEMs specifications complete all as specified and directed

20 each Delivery: 180 days
#40

Supply only in repair Thermostat 0-75 Degree as per exiting size as per OEMs specifications complete all as specified and directed

Supply only in repair Thermostat 0-75 Degree as per exiting size as per OEMs specifications complete all as specified and directed

100 each Delivery: 180 days
#41

Supply only in repair Heating clement 1.5 KW, as per OEMs specifications all as specified and directed

Supply only in repair Heating clement 1.5 KW, as per OEMs specifications all as specified and directed

50 each Delivery: 180 days
#42

Supply only in repair Heating element 2 KW, as per OEMs specifications all as specified and directed

Supply only in repair Heating element 2 KW, as per OEMs specifications all as specified and directed

50 each Delivery: 180 days
#43

Supply only Indicator lamp with flexibe copper wire of suitable size Red by Green

including taking down of defective indicator lamp complete all as specified and directed.

20 each set of two Delivery: 180 days
#44

Supply and fixing PVC Connection with steel reinforced pipe for hot water connection of Size 18 inches x 1 by 2 inches

including rubber washers including taking down of defective blade complete all as specified and directed

40 each Delivery: 180 days
#45

Supply only Apperture plate SS suitable for 25 by 50 Itrs geyser along with rubber gasket, nuts, bolts, etc

as per OEMs specifications complete all as specified and directed

40 each Delivery: 180 days
#46

Supply and fixing in repairs plug top 15 by 16 Amps suitable for geyser socket outlet complete all as specified and as directed

Supply and fixing in repairs plug top 15 by 16 Amps suitable for geyser socket outlet complete all as specified and as directed

40 each Delivery: 180 days
#47

Supply and Fixing in repair stop valve but fancy type, chromium plated, screwed down CP of size 15 mm fancy type complete all as specified and directed.

Supply and Fixing in repair stop valve but fancy type, chromium plated, screwed down CP of size 15 mm fancy type complete all as specified and directed.

60 each Delivery: 180 days
#48

Supply and Fixing in repair bib taps, cast copper alloy with butterfly handle, screwed down, screwed for iron pipe

or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed.

60 each Delivery: 180 days
#49

Supply and Fixing of solar collector plate panel as per existing size, specification and make of capacity upto 200 LPD

incl all accessories complete all as specified and as directed by Engr-in-charge

4 each Delivery: 180 days
#50

Supply and Fixing of solar water heater tank as per existing size, specification and make of capacity upto 300 LPD

inci all accessories complete all as specified and as directed by Enginner-in-charge.

4 each Delivery: 180 days
#51

Supply and Fixing of CIMFR certified LED fiame proof batten suitable for single T8 tube of 20 Watt, IP 65 protected

including 1 x 20 W LED tube 240 Volt, recommended for Gas by Vapour group of ilA and TIB and Zone 182, complete including connecting with PVC insulated multi stranded copper flexible cable 0.5 sqmm three core

20 each Delivery: 180 days
#52

Supply and Fixing CIMFR certified LED flame proof bay light, 60 watt, Well glass in die cast Al housing with heat resistant toughened glass, IP 65 protected. 240 Volt,

PF-0.90, System Luminous efficacy -100Lm by W, Recommended for Gas/Vapour group of IIA and IIB and Zone 1 and 2 complete including connecting with PVC insulated multi stranded copper flexible cable 0.5 sqmm three core

8 each Delivery: 180 days
#53

Supply and Fixing of Flame proof weather proof rotary switch with cable termination box in LM 6 aluminium allcy housing single Pole 16 Amp, 250 volts

complete ali as specified and as directed Make- Sudhir by Shyam Switchgears Pvt ltd.

24 each Delivery: 180 days
#54

Supply and Fixing of Flame proof-weather proof switch socket and plug combined 16 A, 250 V 2P plus Earth

with cable termination in LM 6 aluminium alloy housing with plug complete all as directed.Make - Sudhir by Shyam Switchgears Pvt ltd

10 each Delivery: 180 days
#55

Supply and Fixing of Flame proof weather proof switch socket and plug combined 32 A, 500 V 4P plus Earth

with cable termination in LM 6 aluminium alloy housing with plug complete all as directed Make - Sudhir by Shyam

5 each Delivery: 180 days
#56

Supply and Fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, M20 by 3 by 4 inches conduit MxM by FM x M by Fx F 3 by 4 inches dia 300 mm long

incl complete all as specified and as directed. Make - Sudhir by Shyam Switchgears Pvt ltd

5 each Delivery: 180 days
#57

Supply and Fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, M20 by 3 by 4 inches conduit MxM by FMxMFxF 3 by 4 inches dia 500 mm long

complete all as specified and as directed. Make - Sudhir by Shyam Switchgears Pvt ltd

5 each Delivery: 180 days
#58

Taking down copper by aluminium point wiring light, fan, socket or power complete, including fixture and fittings

such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ,credit for above items should be made as per conditions separately and making good disturbed surfaces of walls, floors, etc.

375 point Delivery: 180 days
#59

Supply and Fixing for concealed conduit for one light point wiring with 1.5 Sqmm nominal cross-sectional area PVC insulated unsheathed single core copper cable working voltage 1100 volts grade

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches by DBs or common earth dolly complete all as specified and directed for the following

90 point Delivery: 180 days
#60

Supply and Fixing for concealed conduit for one light point wiring with 1.5 Sqmm PVC single core cable for one Ceiling Fan by exhaust fan point controlled by one, one way switch and regulator

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm nominal cross sectional area

20 point Delivery: 180 days
#61

Supply and Fixing for concealed conduit for one light point wiring 1.5 Sqmm PVC single core cable for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm nominal cross sectional area

10 point Delivery: 180 days
#62

Supply and Fixing for concealed conduit for one light point wiring with 1.5 Sqmm PVC single core cable for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm nominal cross sectional area

30 point Delivery: 180 days
#63

Supply and Fixing for concealed conduit for one light point wiring with 1.5 Sqmm PVC unsheathed single core cable working for one bell point controlled by one, bell switch 5 Amps

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm nominal cross sectional area

8 point Delivery: 180 days
#64

Supply and Fixing for concealed conduit for one light point wiring with 2.5 Sqmm PVC unsheathed single core cable working for for 5 BY 15 amps switch socket cobmination point.

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 2.5 sq mm nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches by DBs or common earth dolly complete all as specified and directed for the following

20 point Delivery: 180 days
#65

Supply and Fixing for concealed conduit for one light point wiring with 4.0 Sqmm PVC unsheathed single core cable working for power point metal plug earth socket

conforming to IS-694 with stranded copper conducter in and including PVC conduit of adequate size with all accessories including cutting chases and making good the disturbed surface to its original specification including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 4.0 sq mm nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches by DBs or common earth dolly complete all as specified and directed for the following

6 point Delivery: 180 days
#66

Supply and Fixing of point wiring using approved colour coding as per IS by using FRLS PVC 1.5 Sqmm copper cable for fixing switches, sockets, regularors, for 1 light point controlled by 1 switch

unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

90 point Delivery: 180 days
#67

Supply and Fixing of point wiring using approved colour coding by FRLS PVC insulated 1.5 Sqmm copper cable for one Ceiling Fan by exhaust fan point controlled by , one way switch and regulator

unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

20 point Delivery: 180 days
#68

Supply and Fixing of point wiring using approved colour coding by using FRLS PVC 1.5 Sqmm copper cable for one 3 pin 5 Amps switch socket outlet point controlled by 1 switch on independent board

unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

10 point Delivery: 180 days
#69

Supply and Fixing of point wiring using approved colour coding by using FRLS PVC 1.5 Sqmm copper cable for one 3 pin 5 Amps switch socket outlet point controlled by 1 switch on independent board.

unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

30 point Delivery: 180 days
#70

Supply and Fixing of wiring using approved colour coding as per IS by using FRLS PVC 1.5 Sqmm copper cable for 1 bell point controlled by 1, bell switch 5 Amps

unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

15 point Delivery: 180 days
#71

Supply and Fixing of point wiring using approved colour coding by using FRLS PVC 2.5 Sqmm copper cable for for 5 by 15 amps switch socket cobmination point

unsheathed type, alongwith 2.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

20 point Delivery: 180 days
#72

Supply and Fixing of point wiring using approved colour coding as per IS by using FRLS PVC insulated 4.0 Sqmm copper conductor cable for power point metal plug earth socket

unsheathed type, alongwith 4.0 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in and incl PVC casing and caping with accessories having ISI mark fixed on wall surfaces by ceiling including concealed of suitable sunken box and hylum sheet

6 point Delivery: 180 days
#73

Supply and Fixing Sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one two pole MCB 20 Amo, 10 KA

complete all as specifice and directed

12 each Delivery: 180 days
#74

Supply and Fixing in repair Sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket

complete with one two pole MCB 20 Amp. 10 KA complete all as specified and directed.

15 each Delivery: 180 days
#75

Taking down the existing unserviceable main switch by cut out DBs of any type by capacity by description

as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

40 each Delivery: 180 days
#76

Taking down the existing unservicable sub main wiring of any type by description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type by description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

480 rm Delivery: 180 days
#77

Attending complaints of Geyser of any capacity any type from exiting position for checking of heating element, thermostat, and all accessories incl electrical connection etc

removing defected parts and re-assembling the same and refixing to its existing location with testing for its proper functioning complete all as specified and directed by Engr-in-charge. NOTE- i, Complaints should attend within 24 hrs after receipt of complaints from Complaint cell. ii - If any spares required then spares shall be measured and paid separately under relevant items of the schedule

100 each Delivery: 180 days
#78

Material and Labour for dismantling Geyser of any capacity any type from exiting position for descaling, removing its accessories removing the scale

white presipated deposited in it, cleaning the inner tank properly, painting with spray gun and re-assembling the same and refixing to its existing location with testing for its proper functioning complete all as specified and directed by Engr-in-charge. NOTE - i, If any spares required then spares shall be measured and paid separately under relevant items of the schedule, ii - The said job shall be done in MES workshop after dismantling from its original BBY existing location and

50 each Delivery: 180 days
#79

Material and Labour for complete servicing of solar hot water system solar water heater, fiate plate collector type, with cleaning of sluge deposited in pipe line of solar pannel

by using cleaning regent, check and repair of pipe line for any leakage, including carring cut brazing of copper pipe for leakage, cleaning of glass shell, cleaning of hot water tank, replacement of us clamps, adopter, hose pipe including filling of distilled water and coolent in reservior including complete sevicing to keep the plant functional of capacity up to 200 LPD. NOTES- i ,Servicing shall be carried out through authorised technicians or as approved by GE

40 each Delivery: 180 days
#80

Supply and Fixing in repair for replacement of thermostate, long body, ISI marked of solar water heater of cap up to 200 LPD

including taking down of defective thermostate complete all as specified and directed

60 each Delivery: 180 days
#81

Supply and Fixing in repair for replacement of electrical heating element of 1.5 by 2.0 KW ISI marked long thread type, as per existing

ISI marked, of solar water heater of cap up to 200 LPD including taking down of defective element complete all as specified and directed.

60 each Delivery: 180 days
#82

Supply and Fixing for replacement in repair hot water pipe insulation with glass wool and aluminium cladding 20 mm bore

including all material complete all as specified and directed

20 rm Delivery: 180 days
#83

Supply and Fixing for replacement in repair hot water pipe insulation with glass wool and alluminium cladding 40 mm bore

including all material complete all as specified and directed

20 rm Delivery: 180 days

Technical Specifications 17 Items

Item #1 Details

View Catalog
Category Specification Requirement
Generic Rated Current 6A
Generic Nature of Switch 1 way switch
Switch Classification Type of Terminal Connection Screw type terminal, Screwless type terminal
Construction Current Carrying Contact Material Brass, Copper

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

PAN Card copy

2

GSTIN copy

3

Cancelled cheque copy

4

EFT mandate certified by bank

5

Audited financial statements or CA certificate for turnover (last 3 years)

6

ISO 9001 certificate (bidder or OEM)

7

OEM authorisation certificate with bid number

8

Bidder affidavit of non-blacklisting

9

Performance history with government contracts

10

EMD/BG submission

11

Test reports on demand (as required)

Frequently Asked Questions

How to bid for Indian Army BIS marked electrical components tender in India 2026

Bidders must meet turnover, ISO 9001, and OEM authorisation requirements. Submit PAN, GSTIN, cancelled cheque, EFT mandate, EMD, and on-demand test reports. Ensure BIS/ISI marking, IEC/CE conformity, and ISO 9001 certification are included in the bid package for eligibility.

What documents are required for Army lighting and MCB enclosure tender 2026

Required documents include PAN, GSTIN, cancelled cheque, EFT mandate, three-year turnover evidence, ISO 9001, OEM authorisation with bid number, EMD/BG, non-blacklisting affidavit, and government contract performance history. On-demand BIS/ISI test reports may be requested.

What standards must be met for BIS marked electrical components in this tender

Bidders must supply BIS marked components and ISI marked equivalents where specified, with IEC conformity and CE certification. On-demand test reports should demonstrate compliance with IS 10322 IP ratings, IK standards, and rated current/wattage specs.

When is EMD required for the Army procurement of lighting systems

EMD submission is mandatory with the bid package; ensure BG/EMD documents are uploaded as per ATC. The exact amount is defined in the bid document and must accompany the bid to avoid rejection.

What is the OEM turnover requirement for primary product categories

OEM turnover must meet the minimum average annual turnover for the last three years as defined in the bid document. If the OEM is under 3 years old, use completed years post-constitution to compute average turnover.

What is the scope of advance samples for Army tender bidders

Advance sample(s) must be provided to the buyer for approval before commencement of supply. This applies to orders placed against bid; not applicable for direct buying, and must be included in the technical bid.

Which certifications are mandatory for bidders and OEMs

Mandatory certifications include ISO 9001 for bidder or OEM, BIS/ISI marks for components, and IEC/CE conformity. OEM authorisation and test reports as requested by the buyer must accompany the bid for eligibility.

What are the payment terms for the Army supply contract

Payment terms will be specified in the contract/ATC; typically linked to milestones and delivery acceptance. Submit all financial documents; ensure EMD clearance and compliance with bank protocol to avoid payment delays.

Similar Tenders

5 found

Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Non Modular Piano Type Do

Hindustan Aeronautics Limited (hal)

📍 KORAPUT, ODISHA

⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM
Urgent

Bhakra Beas Management Board Flush Type Electrical Accessories Tender Mandi Himachal Pradesh ISI IS 3854 IS 1293 1709 11037 2026

Bhakra Beas Management Board

📍 MANDI, HIMACHAL PRADESH

Est: ₹4.0 L
⏰ Deadline: 2 days left
🛒 Type: Goods
View GEM
Urgent

Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Non Modular Piano Type Do

National Disaster Response Force (ndrf)

📍 KAMRUP, ASSAM

⏰ Deadline: 2 days left
🛒 Type: Goods
View GEM

Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854

Metro Railway Kolkata

Est: ₹24,599
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View GEM
Urgent

Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854

South Western Railway

⏰ Deadline: 1 day left
🛒 Type: Goods
View GEM

Explore More Opportunities

Quick Access