Open Tender for Drill S.S. Twist block,Cordless Electric Drill Machine,GI pipe bending machine,Brake Test arrangeme in RAJKOT, GUJARAT
Progress
Public procurement opportunity for Directorate Of Employment & Training Drill S. S. Twist block, Cordless Electric Drill Machine, GI pipe bending machine, Brake Test arrangement, WELL TYPE MANO METERS, BOURDEN TUBE PRESSURE GAUGE, VALVE POSITIONERS BOOSTER RELAYS, PORTABLE-AIR LPG BRAZING KIT, CORE DRILL MACHINE, VERNIER BEVEL PROTRACTOR, MARKING TABLE SURFACE PLATE TABLE, BLOCKS VEE 150 X 100 X 100 MM, REAMER MACHINE, SCRAPER FLAT, SCRAPER 3 CORNER, SCRAPER HALF ROUND, POWER TOOL, KNURLING TOOL, BORING BAR INDEXABLE, DOWEL PIN, STANDARD TAP SCREWS, LAPPING PLATE 6 INCH DIA, MEDIUM CARBON HEAT TREATED ALLOY STEEL, CAPS SCREWS, DRILLS GUAGE STRAIGHT, DRILL GAUGE, GLOBE VALVE CAST IRON, GATE VALVE DIA, STOP COCK, PIPE MILD STEEL, G. I. PIPE, FLANGE SLIP-ON, JIGS FIXTURE, PULLEYS, KEY, GEAR - SPUR OLD DAMAGED, BELT V, WASHER CLUTCH KEYS, DRIFT DRILL, BEARING DIFFERENT TYPES, LIFTING SLING, WELDING CABLES, TABLE FOR GAS WELDING, COMPRESSOR UNIT SUITABLE FOR PRESSURE in RAJKOT, GUJARAT. Quantity: 90 issued by. Submission Deadline: 29-10-2026 12: 00: 00. View full details and respond.
Tender Data
Bid Details
Quantity
90
Category
CORE DRILL MACHINE
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Group wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
149
OEM Avg. Turnover
6
Past Performance
50 %
Warranty Period
15 days
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Drill S.S. Twist block , Cordless Electric Drill Machine , GI pipe bending machine , Brake Test arrangement , WELL TYPE MANO METERS , BOURDEN TUBE PRESSURE GAUGE , VALVE POSITIONERS BOOSTER RELAYS , PORTABLE-AIR LPG BRAZING KIT , CORE DRILL MACHINE , VERNIER BEVEL PROTRACTOR , MARKING TABLE SURFACE PLATE TABLE , BLOCKS VEE 150 X 100 X 100 MM , REAMER MACHINE , SCRAPER FLAT , SCRAPER 3 CORNER , SCRAPER HALF ROUND , POWER TOOL , KNURLING TOOL , BORING BAR INDEXABLE , DOWEL PIN , STANDARD TAP SCREWS , LAPPING PLATE 6 INCH DIA , MEDIUM CARBON HEAT TREATED ALLOY STEEL , CAPS SCREWS , DRILLS GUAGE STRAIGHT , DRILL GAUGE , GLOBE VALVE CAST IRON , GATE VALVE DIA , STOP COCK , PIPE MILD STEEL , G.I. PIPE , FLANGE SLIP-ON , JIGS FIXTURE , PULLEYS , KEY , GEAR - SPUR OLD DAMAGED , BELT V , WASHER CLUTCH KEYS , DRIFT DRILL , BEARING DIFFERENT TYPES , LIFTING SLING , WELDING CABLES , TABLE FOR GAS WELDING , COMPRESSOR UNIT SUITABLE FOR PRESSURE
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
12
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Morbi
Delivery Pincodes
363642
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Nitin Vallabhbhai Chaniyara | 363642,GOVT. INDUSTRIAL TRAINING INSTITUTE, MORBI, MAHENDRANAGAR CHOWK, HALVAD ROAD, TA./D.I. - MORBI | Morbi | Gujarat | 363642 | 4 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9991867.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
45 Items Sign in to view GEM price trends Sign in for GEM prices
Drill S.S. Twist block
2 mm, 5 mm and 6 mm set of 3
Cordless Electric Drill Machine
18 Volt
GI pipe bending machine
19 mm to 32 mm
Brake Test arrangement
with two spring balance rating 0 to 25 kg
WELL TYPE MANO METERS
WELL TYPE MANO METERS
BOURDEN TUBE PRESSURE GAUGE
0-7 KG/CM2
VALVE POSITIONERS BOOSTER RELAYS
GLAND PACKING ETC.(SET OF 1 NO EACH)
PORTABLE-AIR LPG BRAZING KIT
WITH 2 KG LPG CYLINDER, TORCHES, HOSES, STANDARD MAKE WITH STRAIGHT FLAME
CORE DRILL MACHINE
CORE DRILL MACHINE
VERNIER BEVEL PROTRACTOR
300 MM WITH ACUTE ANGLE ATTACHMENT
MARKING TABLE SURFACE PLATE TABLE
900 900 900 MM HEGHIT
BLOCKS VEE 150 X 100 X 100 MM
150 X 100 X 100 MM
REAMER MACHINE
12 MM TO 16 MM IN STEPS OF 0.5 MM-SET
SCRAPER FLAT
12 MM X 150 MM.
SCRAPER 3 CORNER
15 CM.
SCRAPER HALF ROUND
15 CM.
POWER TOOL
FOR FASTENING CAPACITY 10 TO 18MM
KNURLING TOOL
(DIAMOND, STRAIGHT & DIAGONAL)
BORING BAR INDEXABLE
WITH INSERT 1 INCH SHANK
DOWEL PIN
STRAIGHT DIA 1 INCH LENGTH 4 INCH MAT STAINLESS STEEL
STANDARD TAP SCREWS
M3 M4 M5 M6 M8 M10 M12 M14 M16
LAPPING PLATE 6 INCH DIA
6 INCH DIA
MEDIUM CARBON HEAT TREATED ALLOY STEEL
METRIC STUDS AND BOLTS ALONG WITH NUTS
CAPS SCREWS
M6, M8, M10, M12
DRILLS GUAGE STRAIGHT
SHANK LETTER SIZES A TO Z WITH GUAGE
DRILLS GUAGE STRAIGHT
SHANK WIRE SIZE 1 TO 60 WITH GUAGE
DRILL GAUGE
1,5 TO 12.5 MM IN STEPS OF 0,5 MM
GLOBE VALVE CAST IRON
FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16.1
GATE VALVE DIA
FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16.1
STOP COCK
25NB (2-WAY, THREADED END)
PIPE MILD STEEL
MS 150NB SCH 40 ERW IS 1239
G.I. PIPE
1 INCH 25MM DIA
FLANGE SLIP-ON
FORGED STEEL FLANGE 150NB ANSI B16.5 CLASS 150
JIGS FIXTURE
(SAMPLE)-FOR DEMONSTRATION
PULLEYS
(FOR V-BELT OR FLAT BELT) TO FIT ON 50MM DIA. SHAFT WITH KEY SLOT
KEY
TO FIT SHAFT AND PULLEY
GEAR - SPUR OLD DAMAGED
TO FIT 50 MM SHAFT DIA
BELT V
TO FIT ON PULLEY
WASHER CLUTCH KEYS
JIB, COTTER & CIRCLIP MINIMUM 25MM SIZE, CARBON STEEL MATERIAL
DRIFT DRILL
200 MM HARDENED AND BLACK FINISH
BEARING DIFFERENT TYPES
EACH TYPE OF DIAMETER 25MM (MIN.)
LIFTING SLING
8MM NOMINAL DIA. SINGLE LEG SLING
WELDING CABLES
TO CARRY 350 AMPS WITH FLEXIBLE RUBBER
TABLE FOR GAS WELDING
90 CM X 60 MM X 75 CM FIRE BRICKS ON STAND WITH POSITIONER
COMPRESSOR UNIT SUITABLE FOR PRESSURE
8 BAR DELIVERY 50 LPM (OR MORE) RESERVOIR CAPACITY 24 LITRES (OR MORE) 230V 50 HZ WITH PRESSURE REGULATOR AND WATER SEPARATOR
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Drill S.S. Twist block | 2 mm, 5 mm and 6 mm set of 3 | 4 | set | morbi_con | 15 | |
| 2 | Cordless Electric Drill Machine | 18 Volt | 1 | no | morbi_con | 15 | |
| 3 | GI pipe bending machine | 19 mm to 32 mm | 1 | no | morbi_con | 15 | |
| 4 | Brake Test arrangement | with two spring balance rating 0 to 25 kg | 1 | no | morbi_con | 15 | |
| 5 | WELL TYPE MANO METERS | WELL TYPE MANO METERS | 1 | no | morbi_con | 15 | |
| 6 | BOURDEN TUBE PRESSURE GAUGE | 0-7 KG/CM2 | 1 | no | morbi_con | 15 | |
| 7 | VALVE POSITIONERS BOOSTER RELAYS | GLAND PACKING ETC.(SET OF 1 NO EACH) | 1 | no | morbi_con | 15 | |
| 8 | PORTABLE-AIR LPG BRAZING KIT | WITH 2 KG LPG CYLINDER, TORCHES, HOSES, STANDARD MAKE WITH STRAIGHT FLAME | 1 | no | morbi_con | 15 | |
| 9 | CORE DRILL MACHINE | CORE DRILL MACHINE | 1 | no | morbi_con | 15 | |
| 10 | VERNIER BEVEL PROTRACTOR | 300 MM WITH ACUTE ANGLE ATTACHMENT | 1 | no | morbi_con | 15 | |
| 11 | MARKING TABLE SURFACE PLATE TABLE | 900 900 900 MM HEGHIT | 1 | no | morbi_con | 15 | |
| 12 | BLOCKS VEE 150 X 100 X 100 MM | 150 X 100 X 100 MM | 1 | no | morbi_con | 15 | |
| 13 | REAMER MACHINE | 12 MM TO 16 MM IN STEPS OF 0.5 MM-SET | 1 | no | morbi_con | 15 | |
| 14 | SCRAPER FLAT | 12 MM X 150 MM. | 2 | no | morbi_con | 15 | |
| 15 | SCRAPER 3 CORNER | 15 CM. | 2 | no | morbi_con | 15 | |
| 16 | SCRAPER HALF ROUND | 15 CM. | 2 | no | morbi_con | 15 | |
| 17 | POWER TOOL | FOR FASTENING CAPACITY 10 TO 18MM | 1 | no | morbi_con | 15 | |
| 18 | KNURLING TOOL | (DIAMOND, STRAIGHT & DIAGONAL) | 1 | no | morbi_con | 15 | |
| 19 | BORING BAR INDEXABLE | WITH INSERT 1 INCH SHANK | 4 | no | morbi_con | 15 | |
| 20 | DOWEL PIN | STRAIGHT DIA 1 INCH LENGTH 4 INCH MAT STAINLESS STEEL | 1 | no | morbi_con | 15 | |
| 21 | STANDARD TAP SCREWS | M3 M4 M5 M6 M8 M10 M12 M14 M16 | 1 | no | morbi_con | 15 | |
| 22 | LAPPING PLATE 6 INCH DIA | 6 INCH DIA | 2 | no | morbi_con | 15 | |
| 23 | MEDIUM CARBON HEAT TREATED ALLOY STEEL | METRIC STUDS AND BOLTS ALONG WITH NUTS | 2 | no | morbi_con | 15 | |
| 24 | CAPS SCREWS | M6, M8, M10, M12 | 2 | no | morbi_con | 15 | |
| 25 | DRILLS GUAGE STRAIGHT | SHANK LETTER SIZES A TO Z WITH GUAGE | 2 | no | morbi_con | 15 | |
| 26 | DRILLS GUAGE STRAIGHT | SHANK WIRE SIZE 1 TO 60 WITH GUAGE | 2 | no | morbi_con | 15 | |
| 27 | DRILL GAUGE | 1,5 TO 12.5 MM IN STEPS OF 0,5 MM | 2 | no | morbi_con | 15 | |
| 28 | GLOBE VALVE CAST IRON | FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16.1 | 2 | no | morbi_con | 15 | |
| 29 | GATE VALVE DIA | FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16.1 | 2 | no | morbi_con | 15 | |
| 30 | STOP COCK | 25NB (2-WAY, THREADED END) | 2 | no | morbi_con | 15 | |
| 31 | PIPE MILD STEEL | MS 150NB SCH 40 ERW IS 1239 | 1 | no | morbi_con | 15 | |
| 32 | G.I. PIPE | 1 INCH 25MM DIA | 1 | no | morbi_con | 15 | |
| 33 | FLANGE SLIP-ON | FORGED STEEL FLANGE 150NB ANSI B16.5 CLASS 150 | 4 | no | morbi_con | 15 | |
| 34 | JIGS FIXTURE | (SAMPLE)-FOR DEMONSTRATION | 1 | no | morbi_con | 15 | |
| 35 | PULLEYS | (FOR V-BELT OR FLAT BELT) TO FIT ON 50MM DIA. SHAFT WITH KEY SLOT | 1 | no | morbi_con | 15 | |
| 36 | KEY | TO FIT SHAFT AND PULLEY | 2 | no | morbi_con | 15 | |
| 37 | GEAR - SPUR OLD DAMAGED | TO FIT 50 MM SHAFT DIA | 2 | no | morbi_con | 15 | |
| 38 | BELT V | TO FIT ON PULLEY | 1 | no | morbi_con | 15 | |
| 39 | WASHER CLUTCH KEYS | JIB, COTTER & CIRCLIP MINIMUM 25MM SIZE, CARBON STEEL MATERIAL | 2 | no | morbi_con | 15 | |
| 40 | DRIFT DRILL | 200 MM HARDENED AND BLACK FINISH | 2 | no | morbi_con | 15 | |
| 41 | BEARING DIFFERENT TYPES | EACH TYPE OF DIAMETER 25MM (MIN.) | 1 | no | morbi_con | 15 | |
| 42 | LIFTING SLING | 8MM NOMINAL DIA. SINGLE LEG SLING | 2 | no | morbi_con | 15 | |
| 43 | WELDING CABLES | TO CARRY 350 AMPS WITH FLEXIBLE RUBBER | 20 | no | morbi_con | 15 | |
| 44 | TABLE FOR GAS WELDING | 90 CM X 60 MM X 75 CM FIRE BRICKS ON STAND WITH POSITIONER | 1 | no | morbi_con | 15 | |
| 45 | COMPRESSOR UNIT SUITABLE FOR PRESSURE | 8 BAR DELIVERY 50 LPM (OR MORE) RESERVOIR CAPACITY 24 LITRES (OR MORE) 230V 50 HZ WITH PRESSURE REGULATOR AND WATER SEPARATOR | 1 | no | morbi_con | 15 |
Categories
124
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer