Contract Bidding Open For NEON TESTER,THREE PHASE ENERGY METER ANALOG,WATT METER DYNAMO METER TYPE,METER READING INSTRUMENT O in JAMNAGAR, GUJARAT
Progress
Directorate Of Employment & Training has released a public tender for NEON TESTER, THREE PHASE ENERGY METER ANALOG, WATT METER DYNAMO METER TYPE, METER READING INSTRUMENT OR MRI, CONDUIT PIPE CUTTING AND THREADING MACHINES ADJUSTABLE FOR 15 MM TO 30 MM, CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQ. MM, CRIMPING TOOL PLIER 9 Inch Hex series, WIRE CUTTER AND STRIPPER, WIRING BOARD ON STAND, SCREW DRIVER, FOOT PRINT GRIP, SCISSORS ELECTRICIAN, SCISSORS BLADE ELECTRICIAN, Contactor with auxiliary contacts, LIMIT SWITCH, CUT OUT RELAYS, OVER LOAD RELAYS, UNDER VOLTAGE RELAYS, INSULATOR PIN TYPE INCLUDING HARDWARE FITTING, INSULATOR SHACKLE TYPES INCLUDING HARDWARE FITTING, INSULATOR EGG TYPE INCLUDING HARDWARE FITTING, INSULATOR SUSPENSION TYPE INCLUDING HARDWARE FITTING, EARTH COPPER PLATE, EARTH ELECTRODE PRIMARY ELECTRODE, EARTH ELECTRODE SECONDARY CU STRIP, RESIDUAL CURRENT CUIRCUIT BREAKER OR RCCB 25 AMP, RECHARGEABLE BATTERY, SOLAR PANELS, SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH FOR DAY LIGHTING, MOTION DETECTOR, ELECTRIC KETTLE, ELECTRIC HEATER, TABLE FAN A. C. , Manual Motor coil Winding Machine With step arbor, TABLE FOR DEMONSTRATION, Electrician Screw Driver, Hand operated crimping tool, Screwdriver Insulated, Knife Double Bladed Electrician 100 mm, Cordless Electric Drill Machine, Laboratory Type Induction Coil, Series Test Lamp, Miniature circuit Breaker, ELCB, RCC Pole with accessories and materials 6 Mtr, Digital Wattmeter, Tachometer Analog Type, AC Starters Star Delta Starter- Manual, Potential Transformer, Smart Meter 1 Phase - Smart Energy Meter with overload, overcurrent, tempering, magnetic interference protection in JAMNAGAR, GUJARAT. Quantity: 198. Submission Deadline: 29-10-2026 11: 00: 00. Download documents and apply online.
Tender Data
Bid Details
Quantity
198
Category
Electrician Screw Driver
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Group wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Item Category
NEON TESTER , THREE PHASE ENERGY METER ANALOG , WATT METER DYNAMO METER TYPE , METER READING INSTRUMENT OR MRI , CONDUIT PIPE CUTTING AND THREADING MACHINES ADJUSTABLE FOR 15 MM TO 30 MM , CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQ.MM , CRIMPING TOOL PLIER 9 Inch Hex series , WIRE CUTTER AND STRIPPER , WIRING BOARD ON STAND , SCREW DRIVER , FOOT PRINT GRIP , SCISSORS ELECTRICIAN , SCISSORS BLADE ELECTRICIAN , Contactor with auxiliary contacts , LIMIT SWITCH , CUT OUT RELAYS , OVER LOAD RELAYS , UNDER VOLTAGE RELAYS , INSULATOR PIN TYPE INCLUDING HARDWARE FITTING , INSULATOR SHACKLE TYPES INCLUDING HARDWARE FITTING , INSULATOR EGG TYPE INCLUDING HARDWARE FITTING , INSULATOR SUSPENSION TYPE INCLUDING HARDWARE FITTING , EARTH COPPER PLATE , EARTH ELECTRODE PRIMARY ELECTRODE , EARTH ELECTRODE SECONDARY CU STRIP , RESIDUAL CURRENT CUIRCUIT BREAKER OR RCCB 25 AMP , RECHARGEABLE BATTERY , SOLAR PANELS , SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH FOR DAY LIGHTING , MOTION DETECTOR , ELECTRIC KETTLE , ELECTRIC HEATER , TABLE FAN A.C. , Manual Motor coil Winding Machine With step arbor , TABLE FOR DEMONSTRATION , Electrician Screw Driver , Hand operated crimping tool , Screwdriver Insulated , Knife Double Bladed Electrician 100 mm , Cordless Electric Drill Machine , Laboratory Type Induction Coil , Series Test Lamp , Miniature circuit Breaker , ELCB , RCC Pole with accessories and materials 6 Mtr , Digital Wattmeter , Tachometer Analog Type , AC Starters Star Delta Starter- Manual , Potential Transformer , Smart Meter 1 Phase - Smart Energy Meter with overload, overcurrent, tempering, magnetic interference protection
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
6
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Jamnagar
Delivery Pincodes
361170
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Chaniyara Nitin | 361170,GOVT. INDUSTRIAL TRAINING INSTITUTE, LALPUR, NEAR - TELEPHONE EXCHANGE, JAMNAGAR LALPUR ROAD, TA - LALPUR, DI - JAMNAGAR | Jamnagar | Gujarat | 361170 | 6 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-10000168.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
52 Items Sign in to view GEM price trends Sign in for GEM prices
NEON TESTER
5OO VOLT HEAVY DUTY FOR ELECTRIC TESTING
THREE PHASE ENERGY METER ANALOG
25A, 415V
WATT METER DYNAMO METER TYPE
5 AMP. 250 V 1.25 KW
METER READING INSTRUMENT OR MRI
AS PER SPECIFICATION DOCUMENT
CONDUIT PIPE CUTTING AND THREADING MACHINES ADJUSTABLE FOR 15 MM TO 30 MM
ADJUSTABLE FOR 15 MM TO 30 MM
CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQ.MM
16 SQ MM TO 95 SQ.MM
CRIMPING TOOL PLIER 9 Inch Hex series
9 Inch Hex series
WIRE CUTTER AND STRIPPER
150 MM
WIRING BOARD ON STAND
3 METERS X 1 METER WITH 0.5 METER PROJECTION ON THE TOP
SCREW DRIVER
7 MM X 300 MM SQUARE BLADE
FOOT PRINT GRIP
250 MM
SCISSORS ELECTRICIAN
200 MM
SCISSORS BLADE ELECTRICIAN
150 MM
Contactor with auxiliary contacts
3 phase, 415 Volt, 25 Amp with 2 NO and 2 NC
LIMIT SWITCH
Limit Switch, Liver operated 2A 500v, 2-contacts
CUT OUT RELAYS
16A, 440V
OVER LOAD RELAYS
16A, 440V
UNDER VOLTAGE RELAYS
16A, 440V
INSULATOR PIN TYPE INCLUDING HARDWARE FITTING
Pin Type
INSULATOR SHACKLE TYPES INCLUDING HARDWARE FITTING
shackle type
INSULATOR EGG TYPE INCLUDING HARDWARE FITTING
egg type
INSULATOR SUSPENSION TYPE INCLUDING HARDWARE FITTING
suspension type
EARTH COPPER PLATE
60CM X 60CM X 3.15 MM
EARTH ELECTRODE PRIMARY ELECTRODE
2100 X 28 X 3.25MM
EARTH ELECTRODE SECONDARY CU STRIP
20 X 5MM
RESIDUAL CURRENT CUIRCUIT BREAKER OR RCCB 25 AMP
25A
RECHARGEABLE BATTERY
6V, 7AH
SOLAR PANELS
250 WP
SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH FOR DAY LIGHTING
12 V 10 A
MOTION DETECTOR
230 V
ELECTRIC KETTLE
1500 Watt, 240 V
ELECTRIC HEATER
1500 Watt, 240V
TABLE FAN A.C.
400 MM SWEEP SINGLE PHASE 68-Watt, 230 V WITH REGULATOR
Manual Motor coil Winding Machine With step arbor
With step arbor and counter meter
TABLE FOR DEMONSTRATION
2.5 X 1.25 X 0.75 METERS
Electrician Screw Driver
250 MM
Hand operated crimping tool
UPTO 4 MM
Hand operated crimping tool
UPTO 10 MM
Screwdriver Insulated
4mm X 150 mm, Diamond Head
Screwdriver Insulated
6mm X 150 mm
Knife Double Bladed Electrician 100 mm
100 mm
Cordless Electric Drill Machine
18V, Li ion Cordless 4.0 Ah Rotary Hammer with SDS Plus, 720 W motor, brushless motor and electronic motor protection
Laboratory Type Induction Coil
1000W
Series Test Lamp
230V, 60W
Miniature circuit Breaker
16 amp
ELCB
25Amps, double pole, 30 Ma
RCC Pole with accessories and materials 6 Mtr
MS angle iron, C clamp, stay insulator etc.
Digital Wattmeter
230 V, 1 KW, 50 Hz
Tachometer Analog Type
10000 RPM
AC Starters Star Delta Starter- Manual
For A.C Motors of 2 to 5 H.P.
Potential Transformer
415 V, 50Hz, PT Ratio, 440V/110V, 10VA
Smart Meter 1 Phase - Smart Energy Meter with overload, overcurrent, tempering, magnetic interference protection
1 Phase - Smart Energy Meter
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | NEON TESTER | 5OO VOLT HEAVY DUTY FOR ELECTRIC TESTING | 6 | nos | lalpur_con | 15 | |
| 2 | THREE PHASE ENERGY METER ANALOG | 25A, 415V | 2 | nos | lalpur_con | 15 | |
| 3 | WATT METER DYNAMO METER TYPE | 5 AMP. 250 V 1.25 KW | 1 | nos | lalpur_con | 15 | |
| 4 | METER READING INSTRUMENT OR MRI | AS PER SPECIFICATION DOCUMENT | 1 | nos | lalpur_con | 15 | |
| 5 | CONDUIT PIPE CUTTING AND THREADING MACHINES ADJUSTABLE FOR 15 MM TO 30 MM | ADJUSTABLE FOR 15 MM TO 30 MM | 1 | nos | lalpur_con | 15 | |
| 6 | CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQ.MM | 16 SQ MM TO 95 SQ.MM | 1 | nos | lalpur_con | 15 | |
| 7 | CRIMPING TOOL PLIER 9 Inch Hex series | 9 Inch Hex series | 1 | nos | lalpur_con | 15 | |
| 8 | WIRE CUTTER AND STRIPPER | 150 MM | 6 | nos | lalpur_con | 15 | |
| 9 | WIRING BOARD ON STAND | 3 METERS X 1 METER WITH 0.5 METER PROJECTION ON THE TOP | 2 | nos | lalpur_con | 15 | |
| 10 | SCREW DRIVER | 7 MM X 300 MM SQUARE BLADE | 5 | nos | lalpur_con | 15 | |
| 11 | FOOT PRINT GRIP | 250 MM | 2 | nos | lalpur_con | 15 | |
| 12 | SCISSORS ELECTRICIAN | 200 MM | 2 | nos | lalpur_con | 15 | |
| 13 | SCISSORS BLADE ELECTRICIAN | 150 MM | 2 | nos | lalpur_con | 15 | |
| 14 | Contactor with auxiliary contacts | 3 phase, 415 Volt, 25 Amp with 2 NO and 2 NC | 4 | nos | lalpur_con | 15 | |
| 15 | LIMIT SWITCH | Limit Switch, Liver operated 2A 500v, 2-contacts | 2 | nos | lalpur_con | 15 | |
| 16 | CUT OUT RELAYS | 16A, 440V | 3 | nos | lalpur_con | 15 | |
| 17 | OVER LOAD RELAYS | 16A, 440V | 2 | nos | lalpur_con | 15 | |
| 18 | UNDER VOLTAGE RELAYS | 16A, 440V | 3 | nos | lalpur_con | 15 | |
| 19 | INSULATOR PIN TYPE INCLUDING HARDWARE FITTING | Pin Type | 2 | nos | lalpur_con | 15 | |
| 20 | INSULATOR SHACKLE TYPES INCLUDING HARDWARE FITTING | shackle type | 2 | nos | lalpur_con | 15 | |
| 21 | INSULATOR EGG TYPE INCLUDING HARDWARE FITTING | egg type | 2 | nos | lalpur_con | 15 | |
| 22 | INSULATOR SUSPENSION TYPE INCLUDING HARDWARE FITTING | suspension type | 2 | nos | lalpur_con | 15 | |
| 23 | EARTH COPPER PLATE | 60CM X 60CM X 3.15 MM | 2 | nos | lalpur_con | 15 | |
| 24 | EARTH ELECTRODE PRIMARY ELECTRODE | 2100 X 28 X 3.25MM | 2 | nos | lalpur_con | 15 | |
| 25 | EARTH ELECTRODE SECONDARY CU STRIP | 20 X 5MM | 2 | nos | lalpur_con | 15 | |
| 26 | RESIDUAL CURRENT CUIRCUIT BREAKER OR RCCB 25 AMP | 25A | 1 | nos | lalpur_con | 15 | |
| 27 | RECHARGEABLE BATTERY | 6V, 7AH | 1 | nos | lalpur_con | 15 | |
| 28 | SOLAR PANELS | 250 WP | 1 | nos | lalpur_con | 15 | |
| 29 | SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH FOR DAY LIGHTING | 12 V 10 A | 1 | nos | lalpur_con | 15 | |
| 30 | MOTION DETECTOR | 230 V | 5 | nos | lalpur_con | 15 | |
| 31 | ELECTRIC KETTLE | 1500 Watt, 240 V | 1 | nos | lalpur_con | 15 | |
| 32 | ELECTRIC HEATER | 1500 Watt, 240V | 1 | nos | lalpur_con | 15 | |
| 33 | TABLE FAN A.C. | 400 MM SWEEP SINGLE PHASE 68-Watt, 230 V WITH REGULATOR | 1 | nos | lalpur_con | 15 | |
| 34 | Manual Motor coil Winding Machine With step arbor | With step arbor and counter meter | 2 | nos | lalpur_con | 15 | |
| 35 | TABLE FOR DEMONSTRATION | 2.5 X 1.25 X 0.75 METERS | 2 | nos | lalpur_con | 15 | |
| 36 | Electrician Screw Driver | 250 MM | 1 | nos | lalpur_con | 15 | |
| 37 | Hand operated crimping tool | UPTO 4 MM | 1 | nos | lalpur_con | 15 | |
| 38 | Hand operated crimping tool | UPTO 10 MM | 1 | nos | lalpur_con | 15 | |
| 39 | Screwdriver Insulated | 4mm X 150 mm, Diamond Head | 63 | nos | lalpur_con | 15 | |
| 40 | Screwdriver Insulated | 6mm X 150 mm | 7 | nos | lalpur_con | 15 | |
| 41 | Knife Double Bladed Electrician 100 mm | 100 mm | 34 | nos | lalpur_con | 15 | |
| 42 | Cordless Electric Drill Machine | 18V, Li ion Cordless 4.0 Ah Rotary Hammer with SDS Plus, 720 W motor, brushless motor and electronic motor protection | 1 | nos | lalpur_con | 15 | |
| 43 | Laboratory Type Induction Coil | 1000W | 1 | nos | lalpur_con | 15 | |
| 44 | Series Test Lamp | 230V, 60W | 4 | nos | lalpur_con | 15 | |
| 45 | Miniature circuit Breaker | 16 amp | 1 | nos | lalpur_con | 15 | |
| 46 | ELCB | 25Amps, double pole, 30 Ma | 1 | nos | lalpur_con | 15 | |
| 47 | RCC Pole with accessories and materials 6 Mtr | MS angle iron, C clamp, stay insulator etc. | 1 | set | lalpur_con | 15 | |
| 48 | Digital Wattmeter | 230 V, 1 KW, 50 Hz | 2 | nos | lalpur_con | 15 | |
| 49 | Tachometer Analog Type | 10000 RPM | 1 | nos | lalpur_con | 15 | |
| 50 | AC Starters Star Delta Starter- Manual | For A.C Motors of 2 to 5 H.P. | 1 | nos | lalpur_con | 15 | |
| 51 | Potential Transformer | 415 V, 50Hz, PT Ratio, 440V/110V, 10VA | 1 | nos | lalpur_con | 15 | |
| 52 | Smart Meter 1 Phase - Smart Energy Meter with overload, overcurrent, tempering, magnetic interference protection | 1 Phase - Smart Energy Meter | 1 | nos | lalpur_con | 15 |
Categories
117
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender