TenderDekho Logo
GEM

Bids are Invited For IS 710 BWP Plywood 2400x1200x12mm,IS 710 BWP Plywood 2400x1200x09mm,IS 710 BWP Plywood 2400x1200x06 in AHMEDNAGAR, MAHARASHTRA

Bid Publish Date

24-Sep-2025, 10:40 am

Bid End Date

04-Oct-2025, 11:00 am

Location

AHMEDNAGAR , MAHARASHTRA

Progress

Issue24-Sep-2025, 10:40 am
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

450

Category

IS 710 BWP Plywood 2400x1200x12mm

Bid Type

Two Packet Bid

Categories 28

CASHEW NUT WOODEN PRODUCT KAJU LIGHTNING ARRESTER RUBBER FENDER LIGHTENING PROTECTION DEVICE WOODEN FURNITURE WOOD SUPPLY PLY WOOD FORESTRY PRODUCTS PRESSURE VESSEL SHRINKAGE LIMIT ZINC SULPHATE BROWN SUGAR FIRE BREATHING APPARATUS TILE FLOORING DIAMONDS AUCTION OF WOOD BIRD FEED DIATOMACEOUS EARTH RESISTOR TRANSFORMER OIL BLEACHING EARTH COMPRESSED BOARD OTHER ADHESIVES AND SEALANTS PLYWOOD WOODEN BOARD WOODEN PLANK

Public procurement opportunity for Indian Army IS 710 BWP Plywood 2400x1200x12mm, IS 710 BWP Plywood 2400x1200x09mm, IS 710 BWP Plywood 2400x1200x06mm, IS 710 BWP Plywood 2400x1200x04mm, IS 710 BWP Plywood 2400x1200x19mm, IS 710 BWP Plywood 2100x900x12mm in AHMEDNAGAR, MAHARASHTRA. Quantity: 450 issued by. Submission Deadline: 04-10-2025 11: 00: 00. View full details and respond.

Documents 5

GeM-Bidding-8379327.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Plywood commercial 8 ft x 4 ft x 19mm,Plywood commercial 8 ft x 4 ft x 19mm,Plywood commercial 8ft

Indian Army

Posted: 12 June 2025
Closed: 3 July 2025
GEM

Plywood commercial 8 ft x 4 ft x 19mm,Plywood commercial 8 ft x 4 ft x 19mm,Plywood commercial 8ft

Indian Army

Posted: 29 August 2025
Closed: 8 September 2025
GEM

H3 5530 400054 Plywood Gen Purpose WWR AB 7 Ply 240,H3 5530 000258 Plywood Gen Purpose WWR AB 11 Pl

Indian Army

KAMRUP, ASSAM

Posted: 11 November 2025
Closed: 21 November 2025
GEM

NMDC Limited Wood & Plywood Tender Dantewada Chhattisgarh 2025 – BIJA/SAL Wood, ISI Marked Ply, Local Content

Nmdc Limited

DANTEWADA, CHHATTISGARH

Posted: 21 October 2025
Closed: 1 November 2025
GEM

Commercial or MR Plywood IS 303 grade 8ft X 4ft X 4 mm,Commercial MR Plywood IS 303 grade Plywood 8

Border Road Organisation

PUNE, MAHARASHTRA

Posted: 6 October 2025
Closed: 21 October 2025
GEM

Bill of Quantities (BOQ) 6 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 IS 710 BWP Plywood 2400x1200x12mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 50 sheet offgbson 30
2 IS 710 BWP Plywood 2400x1200x09mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 50 sheet offgbson 30
3 IS 710 BWP Plywood 2400x1200x06mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 20 sheet offgbson 30
4 IS 710 BWP Plywood 2400x1200x04mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 10 sheet offgbson 30
5 IS 710 BWP Plywood 2400x1200x19mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 20 sheet offgbson 30
6 IS 710 BWP Plywood 2100x900x12mm 1 The plywood shall confirm to IS 710 of 2010 BWP grade and the adhesives used for bonding the veneers shall be based on any suitable synthetic resin conforming to BWP Type of IS 848 The Finished plywood boards shall have moisture content of not less than 5 percent and not more than 15 percent at any time of the year The Tolerance on the nominal sizes of finished boards shall confirm to Clause 63 of IS 710 of 2010 The plywood shall conform to the specific requirements given for ECO Mark under relevant clauses of the standardThe plywood board shall be legibly and indelibly marked or stamped with the following particulars 1 Manufacturers name initials or recognized trade mark if any 2 Year of manufacture 3 Abbreviations indicating the species of timber used in each ply 4 Batch number 5 Criteria for which the plywood has been labelled as ECO Mark6 BIS Certification Marking 7 The plywood shall have company barcode so that genuineness can be verified through mobile app 300 sheet offgbson 30

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

OEM Authorization Certificate

6

OEM Annual Turnover

7

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

8

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer