Bid Publish Date
05-Apr-2025, 3:47 pm
Bid End Date
03-Jun-2025, 10:00 am
Value
₹2,76,375
Location
Progress
Quantity
306
Category
AC Supply
Bid Type
Two Packet Bid
Bharat Sanchar Nigam Limited Portal(bsnl) announces a tender for AC Supply, ITC, Pipe, PVC Pipe, Angle Iron, Tray, Cable, TP MCB, Gas, DB, MCB, Isolator, Laying of Cable, End Termination in NORTH 24 PARGANAS, WEST BENGAL. Quantity: 306. Submission Deadline: 03-06-2025 10: 00: 00. Last date to apply is approaching fast!
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
AC Supply , ITC , Pipe , PVC Pipe , Angle Iron , Tray , Cable , TP MCB , Gas , DB , MCB , Isolator , Laying of Cable , End Termination
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Main Document
BOQ
BOQ
GEM_GENERAL_TERMS_AND_CONDITIONS
AC Supply
PART-A (SUPPLY) Supply of ceiling / wall suspended 2 TR (Nominal Capacity) inverter type Ductable Air cooled split AC unit with scroll / rotary compressor AC unit with nominal cooling capacity Not less than 24000 BTU /hr having static pressure not less than 45 Pascal and with pre-charged eco friendly refrigerant R 32 upto 7.5 meter length of refrigerant pipe as per specifications etc. as required. The indoor and outdoor units shall have copper tubes/pipes only. (Refrigerant beyond 7.5meter length if required shall be paid extra on actual measurement basis approx refrigerant required is 300 gram/meter) MAKE - Daiken/ Blue star / Voltas/ Sidhal Refrigeration / LG / etc.
ITC
PART-B (ITC) ITC of 2 TR inverter type Ductable Air-cooled split AC unit with scroll / twin rotary compressor AC unit complete with all accessories i/c making minor civil work for installing the indoor/outdoor unit making good the damage complete etc complete as required.
Pipe
Pdg. and installing suitable size of copper rigit pipe (18G) as per manufacturer recommendation including cutting bending, jointing, brazing etc as reqd. for hot and liquid refrigerant line with nitrile rubber insulation, necessary supports and fittings for 2TR inverter type ductable type Split AC units etc.complete as reqd.a ) COPPER PIPE 3/8 inch / 1/4 inch DIA 18G
Pipe
b) COPPER PIPE 5/8 / 1/2 DIA 18G
PVC Pipe
Supplying Installation Testing and commissioning of following sizes of rigid U-PVC piping complete with elbow, T-joint, socket duly supported as per site requirement and insulated with 6 mm thick closed cell nitrile rubber insulation etc. complete as reqd for drainage purpose.strain clamps, bolts, nuts, washers etc. as required. a) 40 mm U-PVC Pipe
Angle Iron
Supplying and fixing of iron stand made out of 40x40x5mm (3.0 Kg per Meter) thick angle iron for mounting outdoor unit of the above AC as per manufacturer i/c providing other necessarary hardware painting etc. etc complete as required.
Tray
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness
Cable
Supplying & laying of following sizes PVC sheathed armoured copper conductor cable on the existing wall / ceiling/ cable tray for Power/ Control cableing etc. as reqd. a)4 core 2.5 sq.mm. copper armoured cable
Cable
b) 7 core 1.5 sq.mm. copper unarmoured cable
TP MCB
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V C curve TP MCB complete with connections, testing and commissioning etc. as required.
Gas
Providing and charging ( Toping up) refrigerant R-32 in the existing unit as per site requirement in the existing 2TR ductable AC etc. complete as required.
DB
Supplying and fixing of following ways surface/ recess mounting. vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, Inclusive of 200 A tinned copper bus bar, common-neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note - Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a)4 way (4 + 12), Double door
MCB
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Triple pole
Isolator
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 100 amps
Cable
Supplyig of one number 3.5 Core 25 Sqmm Al cond. PVC insulated and PVC sheathed armoured / XLPE power cable of 1.1 KV grade as required.
Laying of Cable
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required . A) Upto 35 sq. mm (clamped with 1mm thick saddle)
End Termination
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3 X 25 sq. mm (25mm)
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | AC Supply | PART-A (SUPPLY) Supply of ceiling / wall suspended 2 TR (Nominal Capacity) inverter type Ductable Air cooled split AC unit with scroll / rotary compressor AC unit with nominal cooling capacity Not less than 24000 BTU /hr having static pressure not less than 45 Pascal and with pre-charged eco friendly refrigerant R 32 upto 7.5 meter length of refrigerant pipe as per specifications etc. as required. The indoor and outdoor units shall have copper tubes/pipes only. (Refrigerant beyond 7.5meter length if required shall be paid extra on actual measurement basis approx refrigerant required is 300 gram/meter) MAKE - Daiken/ Blue star / Voltas/ Sidhal Refrigeration / LG / etc. | 2 | nos | sdeesdxv | 30 | |
| 2 | ITC | PART-B (ITC) ITC of 2 TR inverter type Ductable Air-cooled split AC unit with scroll / twin rotary compressor AC unit complete with all accessories i/c making minor civil work for installing the indoor/outdoor unit making good the damage complete etc complete as required. | 2 | nos | sdeesdxv | 30 | |
| 3 | Pipe | Pdg. and installing suitable size of copper rigit pipe (18G) as per manufacturer recommendation including cutting bending, jointing, brazing etc as reqd. for hot and liquid refrigerant line with nitrile rubber insulation, necessary supports and fittings for 2TR inverter type ductable type Split AC units etc.complete as reqd.a ) COPPER PIPE 3/8 inch / 1/4 inch DIA 18G | 16 | mtr | sdeesdxv | 30 | |
| 4 | Pipe | b) COPPER PIPE 5/8 / 1/2 DIA 18G | 16 | mtr | sdeesdxv | 30 | |
| 5 | PVC Pipe | Supplying Installation Testing and commissioning of following sizes of rigid U-PVC piping complete with elbow, T-joint, socket duly supported as per site requirement and insulated with 6 mm thick closed cell nitrile rubber insulation etc. complete as reqd for drainage purpose.strain clamps, bolts, nuts, washers etc. as required. a) 40 mm U-PVC Pipe | 20 | mtr | sdeesdxv | 30 | |
| 6 | Angle Iron | Supplying and fixing of iron stand made out of 40x40x5mm (3.0 Kg per Meter) thick angle iron for mounting outdoor unit of the above AC as per manufacturer i/c providing other necessarary hardware painting etc. etc complete as required. | 40 | kg | sdeesdxv | 30 | |
| 7 | Tray | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness | 30 | mtr | sdeesdxv | 30 | |
| 8 | Cable | Supplying & laying of following sizes PVC sheathed armoured copper conductor cable on the existing wall / ceiling/ cable tray for Power/ Control cableing etc. as reqd. a)4 core 2.5 sq.mm. copper armoured cable | 40 | mtr | sdeesdxv | 30 | |
| 9 | Cable | b) 7 core 1.5 sq.mm. copper unarmoured cable | 40 | mtr | sdeesdxv | 30 | |
| 10 | TP MCB | Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V C curve TP MCB complete with connections, testing and commissioning etc. as required. | 2 | nos | sdeesdxv | 30 | |
| 11 | Gas | Providing and charging ( Toping up) refrigerant R-32 in the existing unit as per site requirement in the existing 2TR ductable AC etc. complete as required. | 10 | kg | sdeesdxv | 30 | |
| 12 | DB | Supplying and fixing of following ways surface/ recess mounting. vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, Inclusive of 200 A tinned copper bus bar, common-neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note - Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a)4 way (4 + 12), Double door | 1 | no | sdeesdxv | 30 | |
| 13 | MCB | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Triple pole | 2 | nos | sdeesdxv | 30 | |
| 14 | Isolator | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 100 amps | 1 | no | sdeesdxv | 30 | |
| 15 | Cable | Supplyig of one number 3.5 Core 25 Sqmm Al cond. PVC insulated and PVC sheathed armoured / XLPE power cable of 1.1 KV grade as required. | 40 | mtr | sdeesdxv | 30 | |
| 16 | Laying of Cable | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required . A) Upto 35 sq. mm (clamped with 1mm thick saddle) | 40 | mtr | sdeesdxv | 30 | |
| 17 | End Termination | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3 X 25 sq. mm (25mm) | 4 | set | sdeesdxv | 30 |
Discover companies most likely to bid on this tender
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Extended Deadline
03-Jun-2025, 10:00 am
Opening Date
03-Jun-2025, 10:30 am
Extended Deadline
07-May-2025, 9:00 am
Opening Date
07-May-2025, 9:30 am
Extended Deadline
28-Apr-2025, 11:00 am
Opening Date
28-Apr-2025, 11:30 am
Key insights about WEST BENGAL tender market
The eligibility requirements include being a registered entity, capable of demonstrating previous experience in similar projects within the telecommunications domain. Bidders must comply with local business regulations and potentially provide certifications to validate their capability.
Bidders are typically required to present various certificates as part of their submission. This includes registration certificates, tax compliance documents, and proof of experience in similar projects. Depending on local laws, specific quality certification standards may also be essential.
The registration process for participation involves creating an account on the tendering portal, providing necessary business details, and verifying eligibility with required documents. Bidders are encouraged to review the specific requirements laid out in the tender documentation thoroughly.
Documents should be submitted in specified accepted formats, which are typically outlined in the tender notice. Commonly accepted formats include PDF, and Word documents, and all submissions should ensure high clarity and legibility.
The evaluation process considers both technical and financial submissions. Technical specifications, quality standards, and compliance with established testing criteria will be assessed, alongside competitive pricing. The bidders' proposals will be ranked, and notifications of results will be communicated as per the outlined timelines in the tender documentation.
This structured approach aims to ensure a robust evaluation process promoting fairness and transparency in the tendering process, ultimately leading to the selection of the most competent vendor for the project.
Eastern Coalfields Limited
📍 BARDHAMAN, WEST BENGAL
Bharat Sanchar Nigam Limited Portal(bsnl)
📍 PATNA, BIHAR
Indian Army
📍 BATHINDA, PUNJAB
N/a
📍 KHERI, UTTAR PRADESH
Directorate Of Employment & Training
📍 BANASKANTHA, GUJARAT
Sign up now to access all documents
Main Document
BOQ
BOQ
GEM_GENERAL_TERMS_AND_CONDITIONS