GEM

New Okhla Industrial Development Authority Outdoor Gym Equipment Tender Gautam Buddha Nagar UP ISI certified 2026

Q: What standards govern GI pipes used in gym equipment

GI pipes must be ISI marked and conform to **Governing Specification for GI Pipes**, with Main Frame/Central Pipe and Foundation Pipe classified per **IS 1239** and **IS 1161**; back/rest frames and movement frames require IS 1161 perforation and wall thickness as clause 3.

Q: When is the EMD amount for this Noida gym tender due

EMD is **₹31,494**; submission aligns with GeM ATC requirements; ensure online or DD where applicable; preserve EMD until contract award and during any bid validity period as specified by tender ATC.

Bid Publish Date

30-Jun-2026, 7:54 pm

Bid End Date

11-Jul-2026, 8:00 pm

EMD

₹31,494

Location

GAUTAM BUDDHA NAGAR , UTTAR PRADESH

WhatsApp Generate Docs

Progress

Issue30-Jun-2026, 7:54 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

441

Categories 4

EQUIPMENT BAR GYM EQUIPMENT PRESS

Tender Overview

New Okhla Industrial Development Authority (Noida) seeks procurement and installation of multiple outdoor gym equipment units, including Air Walker, Sit Up Board, Surf Board, Leg Press, Chest Press, Parallel Bar, Shoulder Builder, Twister and related components. Estimated value is not disclosed; EMD is ₹31,494. Projects are located in Gautam Buddha Nagar, Uttar Pradesh (201301). Scope emphasizes GI pipe framing with ISI marking, central pipes per IS 1239 and IS 1161 specifications, and installation with safety and quality certifications. A unique feature is the bundle of varied equipment types under a single contract, with mandatory OEM alignment and installation duties. The tender emphasizes compliance with established standards, warranty terms, and site installation requirements, reducing risk through defined material classes, wall thickness, and foundation work. A key differentiator is the explicit focus on copper-free GI piping standards, ISI marking, and IS 1161/IS 1239 grade material for all structural components, ensuring compatibility across all equipment lines. This procurement targets durable, safe outdoor fitness infrastructure for community use, with formal accreditation requirements and structured vendor eligibility.

Technical Specifications & Requirements

Equipment types: Air Walker, Sit Up Board, Surf Board, Leg Press, Chest Press, Parallel Bar, Shoulder Builder/Arm Wheel, Twister, Ring (Wheel), Spoke/Spoke Wheel connectors, Standing/Sitting Twister, and related back rests, seats and frames.
Materials & standards: Governing Specification for GI Pipes; all GI pipes ISI marked; main frame, central pipe and foundation pipes conform to IS 1239 and IS 1161; back rest/frame connections with appropriate wall thickness; bearings and foot rests specified.
Capacity & construction: Maximum user weight in kilograms is specified per item; MS foundation plate thickness and foundation pipes with anchoring required; components include Foundation Pipe nominal bore per IS 1239; movement frames with IS 1239 class; nominal wall thickness per Clause 3 of IS 1161.
Installation & certification: installation is a required service; mandatory Certification (Safety and Quality Requirements); warranty terms stated but not quantified here.
Delivery/installation terms: site installation at Noida region; safety-compliant assembly and testing as part of handover.
Documentation expectations: OEM authorizations, NABL test reports, and factory/licence attestations are implied in ATC clauses.

Terms, Conditions & Eligibility

EMD: ₹31,494; payment terms and submission specifics align with GeM ATC requirements.
Delivery/installation: installation at project site with defined safety and quality standards; option clause may allow quantity fluctuation up to ±25% during contract and extended delivery periods.
Eligibility criteria: bidder must provide OEM authorization, NABL-compliant product tests, ISO/GB standards compliance per ATC, and balance sheet/audited statements; non-blacklisting and regulatory compliance required.
Documentation: GST registration, PAN, balance sheets for two years, factory license, Pollution Control Certificate, NABL test reports; data sheets on OEM letterhead; bid security and non-blacklisting declarations.
Warranty & penalties: warranty terms are required but not numerically specified; penalties or LDs may apply as per contract terms.
Other terms: adherence to 2017 GFR rule provisions; 4.50+ OEM profile rating on GeM; ISO suite compliance (ISO 9001:2015, ISO 45001:2018, ISO 41001:2018, ISO 21368:2022, ISO 20957-series) for bidders/OEMs.

Key Specifications

Maximum User Weight (Kg) per equipment (as specified in title cluster)
Governing Specification for GI Pipes
All GI Pipes ISI marked
Main Frame Pipe, Class as per IS 1239
Foundation Pipe Class per IS 1239; Nominal Bore & Wall Thickness per Clause 3 IS 1161
Back Rest Frame Pipe, Leg Movement Frame Pipe, Foot Rest Pipe with IS 1161 performance data
Bearing, MS Foundation Plate Thickness specifications
Foundation Pipes with anchoring and Nominal Bore of Foundation Pipe
Ring (Wheel) and Spoke/Spoke Wheel connection standards per IS 1239
Horizontal/Vertical pipes per IS 1239 and IS 1161; Movement frames per IS 1239

Terms & Conditions

EMD amount and submission under GeM terms; option to modify quantity by ±25% during contract
Mandatory OEM authorizations and NABL test reports; ISO 9001/45001/41001/21368/20957-series compliance
Site installation coverage; safety and quality certification requirements; warranty terms to be clarified

Important Clauses

Payment Terms

Payment terms linked to delivery milestones; subject to contract; existence of advance payment not specified here

Delivery Schedule

Delivery period may be extended in proportion to quantity variation up to 30 days minimum; option clause allows delivery window adjustments

Penalties/Liquidated Damages

Penalties/LDs to be defined in contract; supplier liable for installation defects and delays per ATC terms

Bidder Eligibility

GeM-registered bidder with OEM profile rating at least 4.50
ISO 9001:2015, ISO 45001:2018, ISO 41001:2018, ISO 21368:2022, ISO 20957-7/5/4 compliance
Not under liquidation or blacklisting; valid factory license; NABL test reports

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Item Category

Air Walker / Stroller - Outdoor Gym Equipment (Q3) , Sit Up Board - Outdoor Gym Equipment (Q3) , Surf Board - Outdoor Gym Equipment (Q3) , Leg Press - Outdoor Gym Equipments (Q3) , Chest Press - Outdoor Gym Equipments (Q3) , Parallel Bar - Outdoor Gym Equipment (Q3) , Shoulder Builder / Arm Wheel - Outdoor Gym Equipment (Q3) , Twister - Outdoor Gym Equipment (Q3)

Authority Records

INFRASTRUCTURE & INDUSTRIAL DEVELOPMENT DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

GAUTAM BUDDHA NAGAR, UTTAR PRADESH

Posted: 20 March 2026

Closed: 15 April 2026

GEM

Air Walker / Stroller - Outdoor Gym Equipment,Sit Up Board - Outdoor Gym Equipment,Surf Board - Out

Nagarpalika

KHEDA, GUJARAT

Posted: 23 December 2025

Closed: 12 January 2026

GEM

Air Walker / Stroller - Outdoor Gym Equipment,Sit Up Board - Outdoor Gym Equipment,Surf Board - Out

N/a

KHEDA, GUJARAT

Posted: 11 February 2026

Closed: 28 February 2026

GEM

Purbi Champaran District Panchayats Outdoor Gym Equipment Tender East Champaran Bihar 2026 ISI marked GI pipes IS 1239 IS 1161

Purbi Champaran District Panchayats

EAST CHAMPARAN, BIHAR

Posted: 11 June 2026

Closed: 22 June 2026

GEM

Category	Specification	Requirement
TYPE	Type	Single
CAPACITY	Maximum User Weight ( Kg )	110.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Frame	100mm Nominal Bore G.I. Pipe
MATERIAL	Main Frame Pipe, Class as per IS 1239	Medium
MATERIAL	leg movement frame	40mm Nominal Bore G.I. Pipe
MATERIAL	Leg Movement Frame Pipe, Class as per IS 1239	Medium
MATERIAL	Handle Frame	32mm Nominal bore G.I. pipe
MATERIAL	Handle Frame Pipe, Class as per IS 1239	Medium
MATERIAL	Bearings	Tapered Roller Bearing
MATERIAL	Foot Rest	Nylon
MATERIAL	MS Foundation Plate Thickness	12.0
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	100mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Medium
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
WARRANTY	Warranty ( years )	4.0

Category	Specification	Requirement
TYPE	Type	Double Station
MATERIAL	Type of Back Rest	Perforated Sheet
MATERIAL	Material of Back Rest	Mild Steel Plate
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Frame/Central Pipe	80mm Nominal Bore G.I. Pipe
MATERIAL	Main Frame/Central Pipe, Class as per IS 1239	Heavy
MATERIAL	Main Frame/Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	80 mm NB with 4 mm Thickness
MATERIAL	Grade of Material as per table 2 of IS 1161	YSt 240
MATERIAL	Foot Rest Pipe	40mm Nominal Bore G.I. Pipe
MATERIAL	Foot Rest Pipe , Class as per IS 1239	Heavy
MATERIAL	Foot Rest Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness	32 mm NB with 3.2 mm Thickness
MATERIAL	Grade of Material as per table 2 IS 1161	YSt 210
MATERIAL	Back Rest Frame Pipe and Connecting Links	25 mm Nominal Bore G.I. Pipe
MATERIAL	Back Rest Frame Pipe and Connecting Links, Class as per IS 1239	Heavy
MATERIAL	Back Rest Frame Pipe and Connecting Links ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness	25 mm NB with 2.6 mm Thickness
MATERIAL	Grade of Material (as per table 2 of IS 1161 )	YSt 210
MATERIAL	Leg Support Pipe	40 mm Nominal bore G.I. pipe
MATERIAL	Leg Support Pipe , Class as per IS 1239	Heavy
MATERIAL	Leg Support Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	32 mm NB with 2.6 mm Thickness
MATERIAL	Grade of Material per table 2 of IS 1161	YSt 210
MATERIAL	Foundation Pipes with anchoring	500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	100mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	80 mm NB with 3.2 mm Thickness
MATERIAL	Grade of Material (as per table 2 of IS 1161)	YSt 210
MATERIAL	M S Foundation Plate Thickness	10.0
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Double
CAPACITY	Maximum User Weight ( Kg )	120.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe	100mm Nominal Bore G.I. Pipe
MATERIAL	Main Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	100 mm NB with 3.6 mm Thickness
MATERIAL	Grade Material as per table 2 of IS 1161	Not Applicable
MATERIAL	Movement (Paddle) Frame	50mm Nominal Bore G.I. Pipe
MATERIAL	Movement ( Paddle ) Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Movement ( Paddle ) Frame Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness	40 mm NB with 2.9 mm Thickness
MATERIAL	Grade Material as per table 2 IS 1161	Not Applicable
MATERIAL	Connecting Links	40 mm Nominal Bore G.I. Pipe
MATERIAL	Connecting Links Pipe, Class as per IS 1239	Heavy
MATERIAL	Connecting Link Pipe ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness	40 mm NB with 2.9 mm Thickness
MATERIAL	Grade Material (as per table 2 of IS 1161 )	Not Applicable
MATERIAL	Handle Frame	32mm Nominal bore G.I. pipe
MATERIAL	Handle Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	32 mm NB with 3.2 mm Thickness
MATERIAL	Grade Material per table 2 of IS 1161	Not Applicable
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	150mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	150 mm NB,165.1 mm OD & 4.5 mm Thickness
MATERIAL	Grade Material (as per table 2 of IS 1161)	Not Applicable
MATERIAL	M S Foundation Plate Thickness	12.0
MATERIAL	Bearings	Ball Bearing
MATERIAL	Foot Rest	Fibre Reinforced Plastic
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	No
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Leg Press Single
CAPACITY	Maximum User Weight ( Kg )	110.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe	80mm Nominal Bore G.I. Pipe
MATERIAL	Main Central Pipe, Class as per IS 1239	Medium
MATERIAL	Moving Frame Pipe	32mm Nominal bore G.I. pipe
MATERIAL	Moving Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Foot Rest Frame/ Foot Rest Hinging Pipe	25mm Nominal Bore G.I. Pipe
MATERIAL	Foot Rest Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Connecting Links	32mm Nominal Bore G.I. Pipe
MATERIAL	Connecting Links Pipe, Class as per IS 1239	Medium
MATERIAL	MS Foundation Plate Thickness	10.0
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	80mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Medium
MATERIAL	Bearings	Ball Bearing
MATERIAL	Seat and Back Rest	2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Leg Press Double
CAPACITY	Maximum User Weight ( Kg )	120.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe	125 mm Nominal Bore G.I. Pipe
MATERIAL	Main Central Pipe, Class as per IS 1239	Heavy
MATERIAL	Moving Frame Pipe	40mm Nominal bore G.I. pipe
MATERIAL	Moving Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Foot Rest Frame/ Foot Rest Hinging Pipe	32mm Nominal Bore G.I. Pipe
MATERIAL	Foot Rest Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Connecting Links	40mm Nominal Bore G.I. Pipe
MATERIAL	Connecting Links Pipe, Class as per IS 1239	Heavy
MATERIAL	MS Foundation Plate Thickness	12.0
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	125mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Bearings	Ball Bearing
MATERIAL	Seat and Back Rest	3mm thick, HDPE with uniform bending radius to avoid sharp edges
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Chest Press Double
CAPACITY	Maximum User Weight ( Kg )	120.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe	125 mm Nominal Bore G.I. Pipe
MATERIAL	Main Central Pipe, Class as per IS 1239	Heavy
MATERIAL	Handle Frame	40mm Nominal bore G.I. pipe
MATERIAL	Handle Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Seat Frame	40mm Nominal Bore G.I. Pipe
MATERIAL	Seat Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Connecting Links	40mm Nominal Bore G.I. Pipe
MATERIAL	Connecting Links Pipe, Class as per IS 1239	Heavy
MATERIAL	Foot Rest Pipe	32mm Nominal Bore G.I. Pipe
MATERIAL	Foot Rest Pipe, Class as per IS 1239	Heavy
MATERIAL	MS Foundation Plate Thickness	12.0
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	125mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Seat and Back Rest	3mm thick, HDPE with uniform bending radius to avoid sharp edges
MATERIAL	Bearings	Ball Bearing
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	No
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Two Wheel
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe construction	100mm Nominal Bore G.I. Pipe
MATERIAL	Main Central Pipe, Class as per IS 1239	Medium
MATERIAL	Ring ( Wheel )	40mm Nominal Bore G.I. Pipe
MATERIAL	Ring ( Wheel ) Pipe, Class as per IS 1239	Heavy
MATERIAL	Pipe of Spokes of Wheel	20mm Nominal bore G.I. pipe
MATERIAL	Pipe of Spoke of Wheel , Class as per IS 1239	Heavy
MATERIAL	Connector Pipe ( between Main Central Pipe and Wheel )	50 mm Nominal bore G.I. pipe
MATERIAL	Connector Pipe, Class as per IS 1239	Heavy
MATERIAL	MS Foundation Plate Thickness	10.0
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	100mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Bearings	Ball Bearing
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
WARRANTY	Warranty ( years )	3.0

Category	Specification	Requirement
TYPE	Type	Triple Twister ( Three standing )
CAPACITY	Maximum User Weight ( Kg )	100.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe	100mm Nominal Bore G.I. Pipe
MATERIAL	Main Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	Not Applicable
MATERIAL	Grade Material as per table 2 of IS 1161	Not Applicable
MATERIAL	Standing/ Sitting Twister Frame Pipe	40 mm Nominal Bore G.I. Pipe
MATERIAL	Standing/ Sitting Twister Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	Not Applicable
MATERIAL	Grade Material as per table 2 IS 1161	Not Applicable
MATERIAL	Rotating Disk Support Pipe at Bottom Pipe	80 mm Nominal Bore G.I. Pipe
MATERIAL	Rotating Disk Support Pipe, Class as per IS 1239	Heavy
MATERIAL	Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness	Not Applicable
MATERIAL	Grade Material (as per table 2 of IS 1161 )	Not Applicable
MATERIAL	Handle Frame Pipe	32mm Nominal bore G.I. pipe
MATERIAL	Handle Frame Pipe, Class as per IS 1239	Heavy
MATERIAL	Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	Not Applicable
MATERIAL	Grade Material per table 2 of IS 1161	Not Applicable
MATERIAL	Foundation Pipes with anchoring	500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	100mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	Not Applicable
MATERIAL	Grade Material (as per table 2 of IS 1161)	Not Applicable
MATERIAL	M S Foundation Plate Thickness	10.0
MATERIAL	Bearings	Ball Bearing
MATERIAL	Foot Rest	LDPE
OTHER REQUIREMENTS	Installation	Not Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	No
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Three Wheel
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Central Pipe construction	100mm Nominal Bore G.I. Pipe
MATERIAL	Main Central Pipe, Class as per IS 1239	Medium
MATERIAL	Ring ( Wheel )	32mm Nominal Bore G.I. Pipe
MATERIAL	Ring ( Wheel ) Pipe, Class as per IS 1239	Medium
MATERIAL	Pipe of Spokes of Wheel	15mm Nominal bore G.I. pipe
MATERIAL	Pipe of Spoke of Wheel , Class as per IS 1239	Medium
MATERIAL	Connector Pipe ( between Main Central Pipe and Wheel )	32 mm Nominal bore G.I. pipe
MATERIAL	Connector Pipe, Class as per IS 1239	Medium
MATERIAL	MS Foundation Plate Thickness	10.0
MATERIAL	Foundation Pipes with anchoring	500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	80mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Medium
MATERIAL	Bearings	Ball Bearing
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	No
WARRANTY	Warranty ( years )	2.0

Category	Specification	Requirement
TYPE	Type	Single Station
MATERIAL	Type of Back Rest	Perforated Sheet
MATERIAL	Material of Back Rest	Fibre Reinforced Plastic
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
MATERIAL	All the GI Pipes are ISI marked	Yes
MATERIAL	Main Frame/Central Pipe	50mm Nominal Bore G.I. Pipe
MATERIAL	Main Frame/Central Pipe, Class as per IS 1239	Heavy
MATERIAL	Main Frame/Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	50 mm NB with 4.5 mm Thickness
MATERIAL	Grade of Material as per table 2 of IS 1161	Not Applicable
MATERIAL	Foot Rest Pipe	32mm Nominal Bore G.I. Pipe
MATERIAL	Foot Rest Pipe , Class as per IS 1239	Heavy
MATERIAL	Foot Rest Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness	Not Applicable
MATERIAL	Grade of Material as per table 2 IS 1161	Not Applicable
MATERIAL	Back Rest Frame Pipe and Connecting Links	40 mm Nominal Bore G.I. Pipe
MATERIAL	Back Rest Frame Pipe and Connecting Links, Class as per IS 1239	Heavy
MATERIAL	Back Rest Frame Pipe and Connecting Links ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness	40 mm NB with 4 mm Thickness
MATERIAL	Grade of Material (as per table 2 of IS 1161 )	Not Applicable
MATERIAL	Leg Support Pipe	32mm Nominal bore G.I. pipe
MATERIAL	Leg Support Pipe , Class as per IS 1239	Heavy
MATERIAL	Leg Support Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	Not Applicable
MATERIAL	Grade of Material per table 2 of IS 1161	Not Applicable
MATERIAL	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
MATERIAL	Nominal Bore of Foundation Pipe	80mm
MATERIAL	Foundation Pipe, Class as per IS 1239	Heavy
MATERIAL	Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	80 mm NB with 4.8 mm Thickness
MATERIAL	Grade of Material (as per table 2 of IS 1161)	Not Applicable
MATERIAL	M S Foundation Plate Thickness	12.0
OTHER REQUIREMENTS	Installation	Included
CERTIFICATION	Certfication ( Safety and Quality Requirements )	No
WARRANTY	Warranty ( years )	2.0

Browse Tenders

Categories

States

Cities

Authorities

New Okhla Industrial Development Authority Outdoor Gym Equipment Tender Gautam Buddha Nagar UP ISI certified 2026

Categories 4

Tender Overview

Technical Specifications & Requirements

Terms, Conditions & Eligibility

Key Specifications

Terms & Conditions

Important Clauses

Payment Terms

Delivery Schedule

Penalties/Liquidated Damages

Bidder Eligibility

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 30

GeM-Bidding-9540118.pdf

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

Other Documents

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Air Walker / Stroller - Outdoor Gym Equipment,Sit Up Board - Outdoor Gym Equipment,Surf Board - Out

New Okhla Industrial Development Authority Outdoor Gym Equipment Tender Gautam Buddha Nagar UP ISI/IS 1239 1161 2026

Air Walker / Stroller - Outdoor Gym Equipment,Sit Up Board - Outdoor Gym Equipment,Surf Board - Out

Air Walker / Stroller - Outdoor Gym Equipment,Sit Up Board - Outdoor Gym Equipment,Surf Board - Out

Purbi Champaran District Panchayats Outdoor Gym Equipment Tender East Champaran Bihar 2026 ISI marked GI pipes IS 1239 IS 1161

Technical Specifications 27 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details