GEM

Invitation to Bid - Inflatable Tent,Inflatable Tent,Inflatable Tent,Inflatable Tent in LEH, JAMMU & KASHMIR

Bid Publish Date

09-Jan-2026, 3:22 pm

Bid End Date

29-Jan-2026, 5:00 pm

Location

LEH LADAKH , JAMMU AND KASHMIR

Progress

Issue09-Jan-2026, 3:22 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

Past Similar Tenders (Historical Results)

5 found

Central Public Works Department Lock Fittings Tender in Delhi 2026 IS 1223 IS 1341 IS 204 ISI Marked

Cpwd

CENTRAL DELHI, DELHI

Posted: 9 January 2026

Closed: 12 January 2026

GEM

Miniature Circuit Breakers Distribution Boards as per IS 13032

Indian Army

LEH, JAMMU & KASHMIR

Posted: 9 January 2026

Closed: 12 January 2026

GEM

Kolhapur District Panchayats White LED Solar Street Lighting System Tender 2025 Maharashtra ISI/IS 550 2025

Kolhapur District Panchayats

KOLHAPUR, MAHARASHTRA

Posted: 30 December 2025

Closed: 12 January 2026

GEM

Housing And Urban Development Department Odisha Audio DSP Tender 2025 - IPv6 Ready IT Equipment & ISI/ISO Standards

N/a

CUTTACK, ODISHA

Posted: 31 December 2025

Closed: 12 January 2026

GEM

Toilet Brush (V3),Naphthalene (V3) Conforming to IS 539

Armed Forces Tribunal

DEHRADUN, UTTARAKHAND

Posted: 8 January 2026

Closed: 12 January 2026

GEM

Technical Specifications 4 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
GENERIC	Tent size (outer side dimension of the tent) (Length X Width X Height at ridge X Minimum Diameter of the inflatable arc)	24 Feet X 10 Feet X 7 feet X 28 Cm
GENERIC	Tent structure	Two doors and four windows – doors and windows can be rolled up (if required) and are equipped with a mosquito net – the door and window closing mechanism will be fitted with heavy duty nylon zips and Velcro taps (for tent 24 feet length)
GENERIC	Design/drawing of inflatable tent	As per drawing – uploaded at GeM drawing (for 24 feet length)
GENERIC	Maximum time required for complete erection of tent	10 minutes with the help of two persons (for 14 feet length), 10 to 12 minutes with the help of two persons (for 24 feet length), Set up time - standard compressor: approx. 260 sec / 0.15 bar, Set up time - turbo compressor: approx. 240 sec / 0.25 bar, Set up time - compressed air bottles: approx. 95 sec / 0.3 bar, Set up time - standard compressor: approx. 420 sec / 0.15 bar, Set up time - turbo compressor: approx. 360 sec / 0.25 bar, Set up time - compressed air bottles: approx. 240 sec / 0.3 bar, Set up time - standard compressor: approx. 540 sec / 0.15 bar, Set up time - turbo compressor: approx. 450 sec / 0.25 bar, Set up time - compressed air bottles: approx. 300 sec / 0.3 bar, Setup Time 60 Min, with 2 Nos 1200W Air Compressor., Setup Time 30 Min, with 1200W Air Compressor., Standard compressor: approx. 540 sec / 0.15 bar (2.17psi), Standard compressor: approx. 540 sec / 0.15 bar (2.17psi) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
GENERIC	Each tent supplied with	12 numbers MS pegs –12 numbers Polyester rope (3.5 mtr each) – 12 numbers Aluminium pipes – electric air blower – 2 numbers foot pump – hammer – repair kit for the stability of the inflated tent during torrential rain and thunderstorm (for 24 feet length)
GENERIC	Structure design (tent frame and tent skin) NOTE : ARCHES WILL BE PERMANENTLY ATTACHED TO THE TENT COVER AND FLOOR	Three numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 14 feet length), Four numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1150 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 24 feet length), Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, No Arches, Tent Air Beam skeleton or Outer Dimension of 21.9L x 13.9W x 7.0H Meters, is made of 6 Nos Air beam Arches with 7 Nos Horizontal beams having 950mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Tent Air Beam skeleton or Outer Dimension of 10.8L x 6.8W x 3.7H Meters, is made of 4 Nos Air beam Arches with 5 Nos Horizontal beams having 420mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, (neoprene coated is not acceptable) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
GENERIC	Operating working pressure of the tent	2.5 psi (pounds per square inch) and there will be no leakage on the joints
MATERIAL	Tent frame material	One side hypalon coated polyester fabric and inside neoprene coated having minimum 1150 GSM ± 50 GSM (for 24 feet length)
ACCESSORIES MATERIAL	Aluminium pipes	12 numbers Pipe having length of 1.7 mtr to 1.8 mtr – Outer dia 31 mm minimum with 2 mm Wall thickness(for 24 feet length)
ACCESSORIES MATERIAL	MS peg	12 numbers having 300 mm length with 18 mm dia conforming to IS 1875 – latest (for 24 feet length)
ACCESSORIES MATERIAL	Mosquito Net made up of	Mosquito net made out of Mesh
ACCESSORIES MATERIAL	Foot pump	2 numbers (for 24 feet length)
PACKING	Total weight of product (including packing accessories)	90 Kgs (for 24 feet length)
WARRANTY AND GUARANTY	Guaranty certificate will be provided along with each tent	Yes
CERTIFICATION	Tensile strength of the arch fabric in warp direction	395 Kgs minimum (for 24 feet length)
CERTIFICATION	Tensile strength of the arch fabric in weft direction	395 Kgs minimum (for 24 feet length)

Item #2 Details

View Catalog

Category	Specification	Requirement
GENERIC	Tent size (outer side dimension of the tent) (Length X Width X Height at ridge X Minimum Diameter of the inflatable arc)	Width: 5.65 m - Length: 7.92 m - Side height: 2.80 m - Peak height: 3.00 m - Floor space: 44.75 sqm Inflatable arches: 4 units
GENERIC	Tent structure	Two doors and two windows – doors and windows can be rolled up (if required) and are equipped with a mosquito net – the door and window closing mechanism will be fitted with heavy duty nylon zips and Velcro taps (for tent of 14 feet length)
GENERIC	Design/drawing of inflatable tent	As per drawing – uploaded at QR/Spcn (for 14 feet length)
GENERIC	Maximum time required for complete erection of tent	10 minutes with the help of two persons (for 14 feet length)
GENERIC	Each tent supplied with	10 numbers MS pegs –12 numbers Polyester rope (3.5 mtr each) – 8 numbers. Aluminium pipes – electric air blower – foot pump – hammer – repair kit for the stability of the inflated tent during torrential rain and thunderstorm (for 14 feet length)
GENERIC	Structure design (tent frame and tent skin) NOTE : ARCHES WILL BE PERMANENTLY ATTACHED TO THE TENT COVER AND FLOOR	Three numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 14 feet length)
MATERIAL	Tent frame material	One side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM (for 14 feet length)
ACCESSORIES MATERIAL	Aluminium pipes	As per requirement
ACCESSORIES MATERIAL	MS peg	10 numbers having 300 mm length with 18 mm dia conforming to IS 1875 – latest (for 14 feet length)
ACCESSORIES MATERIAL	Foot pump	2 numbers (for each type)
PACKING	Total weight of product (including packing accessories)	72 Kgs (for 14 feet length)
WARRANTY AND GUARANTY	Guaranty certificate will be provided along with each tent	Yes
CERTIFICATION	Tensile strength of the arch fabric in warp direction	350 Kgs minimum (for 14 feet length)
CERTIFICATION	Tensile strength of the arch fabric in weft direction	350 Kgs minimum (for 14 feet length)

Item #3 Details

View Catalog

Category	Specification	Requirement
GENERIC	Tent size (outer side dimension of the tent) (Length X Width X Height at ridge X Minimum Diameter of the inflatable arc)	14 Feet X 10 Feet X 7 feet X 28 Cm
GENERIC	Tent structure	Two doors and two windows – doors and windows can be rolled up (if required) and are equipped with a mosquito net – the door and window closing mechanism will be fitted with heavy duty nylon zips and Velcro taps (for tent of 14 feet length)
GENERIC	Design/drawing of inflatable tent	As per requirement
GENERIC	Maximum time required for complete erection of tent	10 minutes with the help of two persons (for 14 feet length), 10 to 12 minutes with the help of two persons (for 24 feet length), Set up time - standard compressor: approx. 260 sec / 0.15 bar, Set up time - turbo compressor: approx. 240 sec / 0.25 bar, Set up time - compressed air bottles: approx. 95 sec / 0.3 bar, Set up time - standard compressor: approx. 420 sec / 0.15 bar, Set up time - turbo compressor: approx. 360 sec / 0.25 bar, Set up time - compressed air bottles: approx. 240 sec / 0.3 bar, Set up time - standard compressor: approx. 540 sec / 0.15 bar, Set up time - turbo compressor: approx. 450 sec / 0.25 bar, Set up time - compressed air bottles: approx. 300 sec / 0.3 bar, Setup Time 60 Min, with 2 Nos 1200W Air Compressor., Setup Time 30 Min, with 1200W Air Compressor., Standard compressor: approx. 540 sec / 0.15 bar (2.17psi), Standard compressor: approx. 540 sec / 0.15 bar (2.17psi) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
GENERIC	Each tent supplied with	10 numbers MS pegs –12 numbers Polyester rope (3.5 mtr each) – 8 numbers. Aluminium pipes – electric air blower – foot pump – hammer – repair kit for the stability of the inflated tent during torrential rain and thunderstorm (for 14 feet length)
GENERIC	Structure design (tent frame and tent skin) NOTE : ARCHES WILL BE PERMANENTLY ATTACHED TO THE TENT COVER AND FLOOR	Three numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 14 feet length), Four numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1150 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 24 feet length), Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, No Arches, Tent Air Beam skeleton or Outer Dimension of 21.9L x 13.9W x 7.0H Meters, is made of 6 Nos Air beam Arches with 7 Nos Horizontal beams having 950mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Tent Air Beam skeleton or Outer Dimension of 10.8L x 6.8W x 3.7H Meters, is made of 4 Nos Air beam Arches with 5 Nos Horizontal beams having 420mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, (neoprene coated is not acceptable) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
MATERIAL	Tent frame material	One side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM (for 14 feet length)
ACCESSORIES MATERIAL	PP rope	As per requirement
ACCESSORIES MATERIAL	Aluminium pipes	8 numbers Pipe having length of 1.7 mtr to 1.8 mtr – Outer dia 31 mm minimum with 2 mm Wall thickness (for 14 feet length)
ACCESSORIES MATERIAL	MS peg	10 numbers having 300 mm length with 18 mm dia conforming to IS 1875 – latest (for 14 feet length)
ACCESSORIES MATERIAL	Nylon Zips and Velcro tapes	2 feet with runner &Velcro and 6 feet with runner &Velcro
ACCESSORIES MATERIAL	Foot pump	1 number (for 14 feet length)
PACKING	Total weight of product (including packing accessories)	72 Kgs (for 14 feet length)
WARRANTY AND GUARANTY	Guaranty certificate will be provided along with each tent	Yes
CERTIFICATION	Tensile strength of the arch fabric in warp direction	350 Kgs minimum (for 14 feet length)
CERTIFICATION	Tensile strength of the arch fabric in weft direction	350 Kgs minimum (for 14 feet length)

Item #4 Details

View Catalog

Category	Specification	Requirement
GENERIC	Tent size (outer side dimension of the tent) (Length X Width X Height at ridge X Minimum Diameter of the inflatable arc)	14 Feet X 10 Feet X 7 feet X 28 Cm
GENERIC	Tent structure	Two doors and two windows – doors and windows can be rolled up (if required) and are equipped with a mosquito net – the door and window closing mechanism will be fitted with heavy duty nylon zips and Velcro taps (for tent of 14 feet length)
GENERIC	Design/drawing of inflatable tent	As per drawing – uploaded at GeM drawing (for 24 feet length)
GENERIC	Maximum time required for complete erection of tent	10 minutes with the help of two persons (for 14 feet length), 10 to 12 minutes with the help of two persons (for 24 feet length), Set up time - standard compressor: approx. 260 sec / 0.15 bar, Set up time - turbo compressor: approx. 240 sec / 0.25 bar, Set up time - compressed air bottles: approx. 95 sec / 0.3 bar, Set up time - standard compressor: approx. 420 sec / 0.15 bar, Set up time - turbo compressor: approx. 360 sec / 0.25 bar, Set up time - compressed air bottles: approx. 240 sec / 0.3 bar, Set up time - standard compressor: approx. 540 sec / 0.15 bar, Set up time - turbo compressor: approx. 450 sec / 0.25 bar, Set up time - compressed air bottles: approx. 300 sec / 0.3 bar, Setup Time 60 Min, with 2 Nos 1200W Air Compressor., Setup Time 30 Min, with 1200W Air Compressor., Standard compressor: approx. 540 sec / 0.15 bar (2.17psi), Standard compressor: approx. 540 sec / 0.15 bar (2.17psi) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
GENERIC	Each tent supplied with	10 numbers MS pegs –12 numbers Polyester rope (3.5 mtr each) – 8 numbers. Aluminium pipes – electric air blower – foot pump – hammer – repair kit for the stability of the inflated tent during torrential rain and thunderstorm (for 14 feet length)
GENERIC	Structure design (tent frame and tent skin) NOTE : ARCHES WILL BE PERMANENTLY ATTACHED TO THE TENT COVER AND FLOOR	Three numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 14 feet length), Four numbers of individual inflatable air chambers (arch) made out of one side hypalon coated polyester fabric and inside neoprene coated having minimum 1150 GSM ± 50 GSM and the canopy will be one sided PU coated polyester fabric and the floor fabric will be both sides PVC coated polyester fabric (for 24 feet length), Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, No Arches, Tent Air Beam skeleton or Outer Dimension of 21.9L x 13.9W x 7.0H Meters, is made of 6 Nos Air beam Arches with 7 Nos Horizontal beams having 950mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Tent Air Beam skeleton or Outer Dimension of 10.8L x 6.8W x 3.7H Meters, is made of 4 Nos Air beam Arches with 5 Nos Horizontal beams having 420mm Diameter Air Beams, made of air-retaining PVC fabric using 900-1100 GSM UV Stabilized Flame Retardant Dtex Polyester fabric. Color: Grey. This Skeleton is draped on the outer side with rugged Vinyl Coated Polyester Fabric to form the Tents outer cover. The Floor is connected to the Air- Beams and outer cover on all sides. This prevents water from entering the floor space easily, during rain, or on muddy ground., Frame made out of PVC (high frequency welded) - Aluminium tubes are being put in the sides between the main frames for reinforcement - At floor level there are connection flaps for the pegs (spaced on the long sides of the tent canvas) - There are loops attached to all longitudinal and cross beams for hanging up lamps/drip bottles/other hanging items, (neoprene coated is not acceptable) (for 5.28m, 7.92m, 10.56m 13.2m Length Tent)
MATERIAL	Tent frame material	One side hypalon coated polyester fabric and inside neoprene coated having minimum 1000 GSM ± 50 GSM (for 14 feet length)
MATERIAL	Tent skin material(used for the canopy)	One sided PU coated polyester fabric of minimum 240 GSM ± 20 GSM weight
ACCESSORIES MATERIAL	PP rope	As per requirement
ACCESSORIES MATERIAL	Aluminium pipes	12 numbers Pipe having length of 1.7 mtr to 1.8 mtr – Outer dia 31 mm minimum with 2 mm Wall thickness(for 24 feet length)
ACCESSORIES MATERIAL	MS peg	12 numbers having 300 mm length with 18 mm dia conforming to IS 1875 – latest (for 24 feet length)
ACCESSORIES MATERIAL	Foot pump	2 numbers (for 24 feet length)
PACKING	Total weight of product (including packing accessories)	90 Kgs (for 24 feet length)
WARRANTY AND GUARANTY	Guaranty certificate will be provided along with each tent	Yes
CERTIFICATION	Tensile strength of the arch fabric in warp direction	395 Kgs minimum (for 24 feet length)
CERTIFICATION	Tensile strength of the arch fabric in weft direction	395 Kgs minimum (for 24 feet length)

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC)

Additional Doc 3 (Requested in ATC)

Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

5 found

HYADRAULIC_ TROLLEY_ TWO_ WHEELER

E-nagar Palika Government Of Madhya Pradesh

📍 SHIVPURI, MADHYA PRADESH

EMD: ₹10,000

⏰ Deadline: 39 months left

🛒 Type: Goods

View GEM

Chlorine Tonner as per IS 646

City Municipal Council Bidar

📍 BIDAR, KARNATAKA

EMD: ₹30,325

⏰ Deadline: 16 months left

🛒 Type: Goods

View GEM

K - 4 Crash Rated Blocking Bollard

Indian Army

📍 GURDASPUR, PUNJAB

⏰ Deadline: 15 months left

🛒 Type: Goods

View GEM

Portable Disinfectant Fogging Machine

Ahmednagar District Panchayats

📍 AHMEDNAGAR, MAHARASHTRA

⏰ Deadline: 12 months left

🛒 Type: Goods

View GEM

Solar power pack with Solar panel

Ahmednagar District Panchayats

📍 AHMEDNAGAR, MAHARASHTRA

⏰ Deadline: 12 months left

🛒 Type: Goods

View GEM

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

JAMMU AND KASHMIR State tenders

LEH LADAKH , JAMMU AND KASHMIR City tenders

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 10

GeM-Bidding-8808020.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Inflatable Tent,Inflatable Tent,Inflatable Tent,Inflatable Tent in LEH, JAMMU & KASHMIR

Past Similar Tenders (Historical Results)

Central Public Works Department Lock Fittings Tender in Delhi 2026 IS 1223 IS 1341 IS 204 ISI Marked

Miniature Circuit Breakers Distribution Boards as per IS 13032

Kolhapur District Panchayats White LED Solar Street Lighting System Tender 2025 Maharashtra ISI/IS 550 2025

Housing And Urban Development Department Odisha Audio DSP Tender 2025 - IPv6 Ready IT Equipment & ISI/ISO Standards

Toilet Brush (V3),Naphthalene (V3) Conforming to IS 539

Technical Specifications 4 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Similar Tenders

HYADRAULIC_ TROLLEY_ TWO_ WHEELER

Chlorine Tonner as per IS 646

K - 4 Crash Rated Blocking Bollard

Portable Disinfectant Fogging Machine

Solar power pack with Solar panel

Explore More Opportunities

Unlock Tender Documents

Documents 10

GeM-Bidding-8808020.pdf

CATALOG-Specification-1

Other Documents

Other Documents

Other Documents

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Documents

Unlock All Documents

GeM-Bidding-8808020.pdf

CATALOG-Specification-1

Other Documents

Other Documents

Other Documents

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Sign In Required

Why Sign In?

Never Miss a Tender!

Tender Alerts

Where should we send alerts?

✓ Alert Setup Complete!