Open Tender for Removing the calandria of the Evaporator and installing and fitting a new calandria of 650 m square in SAHARANPUR, UTTAR PRADESH

Removing the calandria of the Evaporator and installing and fitting a new calandria of 650 m square heating surface and installing all the pipe lines valves and accessories in their place

The worn out umbrella plate in the Vapor Cell Semi Concentrator was removed and the plate was repaired and replaced with plastic

Removing the neck selvage of the quad body semi container and replacing it with a new 8 10 mm MS plate and testing it.

Cutting out the weakened roof of the quad body and replacing it with a 12mm plate provided and testing it.

Removal of the weak part of the exhaust pipeline going to the semi condenser vapor shell and fitting a new 800 mm diameter pipeline using the provided 8 10 mm plate in its place.

Installing and strengthening the umbrella fitted to the vapor shell semiconductor quad body and conducting a satisfactory trial.

Removing the weakened intermediate first vapor second vapor pipes of the quad bodies and installing new ones with a diameter of 700 850 mm from 8 10 mm plates and conducting a satisfactory trial.

Dismantle fabricate and erect a 900 1100 mm band and conduct a satisfactory trial.

Cut and remove the double beat valve from the juice heater and install a new double beat valve size 8 diameter and conduct a trial

Install the sublimation pipes from the Satvik type sulfur furnaces using the provided pipe or a new one and conduct a trial.

Removing the filtrate bottle plate of the vacuum filter and repairing it with the provided plate and giving it a trial.

Cutting and removing the neck shell of the lime slaker at the lime station and replacing it with a new one using the provided plate and giving it a trial.

Removing the worn out coils in the melters of the Satvik Sulfur Furnace replacing them with new ones and conducting hydraulic testing and giving a satisfactory trial.

Removing the damaged weak steam coils in the film tine sulfur melters replacing them with new ones and conducting hydraulic testing and giving a satisfactory trial

Remove the old corroded SO2 gas line at the sulfur furnace station and install the new seamless MS line with flanges tightening the joints and bolts

Remove the grooved plate of the filtrate tank located below the vacuum filter install the plate provided and perform a trial.

Patch the weak shell of the burning chamber of the film type sulfur furnace with the plate provided for a length of approximately 5 feet from the bottom and give a satisfactory trial.

Removing the SO2 chamber inside the last cooler of the film type sulfur furnace and installing a new one using the provided 10 mm MS plate and making all connections.

Cut out and remove all rotten mud scrapers inside the door clarifier and install the provided plates and belts according to size and give a satisfactory trial.

Repairing the weak parts of the agitator fitted on the vacuum filter and giving satisfactory trial.

Cutting out all the worn out weak cooling pipes and flanges of the coolers of the Satvik Sulphur Furnace and installing new flanges and cooling pipes using the provided pipe lines and plates

Cut and remove the weak corroded cross in the gas pipeline at the Sulphur Furnace Station and install the cross by making a new flange from the provided MS pipeline and plate

Repairing the bagasse line leading to the mill installed above the vacuum filter station in the boiling house and conducting a satisfactory trial.

Install the new brass SS tubes provided by the mill committee in the calandria expand them and conduct hydraulic testing of the calandria at a pressure of 4 kg cm2 and give a satisfactory trial

Removing the old corroded platform and replacing it with a new one

Constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 HP.

Dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials.

Dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials.

Dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials.